Dynadock U3.0 freezes the display when connected

I am using the dynadock u3.0 docking station. The display/laptop freezes every so often. It happens most often when I visit a website with flash video (CNN/Youtube) etc. I thought this has to do with Chrome/Flash so I uninstalled/reinstalled etc but the issue still exists. The laptop when not connected with the docking station, it behaves fine. I am able to visit youtube, cnn etc. So I think the issue is with the docking station. Any idea how to get this fixed?

Try downloading the latest drivers from DisplayLink: http://www.displaylink.com/support/downloads.php
- Peter

Similar Messages

Message displays itunes cannot read the contents of the iphone when connected on a laptop. Doesnt let me back up and sync and asks for restoring to factory defaults??!!

message displays itunes cannot read the contents of the iphone when connected on a laptop. Doesnt let me back up and sync and asks for restoring to factory defaults??!!

Hello ardninam,
Thanks for using Apple Support Communities.
If the content on your iPhone cannot be read by iTunes, then you will need to follow the directions in the popup and restore your iPhone to the factory settings. You can then try and restore from a previous backup.
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

How should I find out the stuff that keeps freezing the display?

Hi,
I am using gnome-shell from testing repo on a laptop computer. The system(I do not know which part) has frozen several times in a same way. The whole display just suddenly stops reacting while I am scrolling down the web page in Chrome, opening a wine program, or something else. I have not figured out any pattern of its occurrence, so it's not repeatable for now. It seems that it's related to some modules or libraries used by Google Chrome browser or Wine because it mostly happens when I am interacting with Chrome browser.
It seems that only the display is frozen. I could not enter the tty with Ctrl + Alt + <F1...F8>, but I could move the cursor with my TrackPoint mouse. The NumLk/CapsLk LED also reacts normally. Even the network is working - when turning off and on the hardware switch of wireless, WiFi LED shows like the system is trying to reconnect the WiFi automatically.
If there's anything related Chrome, I guess one of the possible reasons is that when installing google-chrome-dev from AUR, I replaced libpci with libpciaccess in the depends array so that it won't cause a file exists conflict when installing.
Another possible reason is xinput, which I use for TrackPoint scrolling.
Now I am very curious in finding out what exactly it is that keeps freezing the display, but I'm not sure where to start. Could anyone give me some suggestions?
THANKS

demian wrote:I'd start my DE from the terminal and when it freezes use alt+sysrq to regain control and see what happened. alt+sysrq+r,e,i should bring you back to the terminal.
thanks, but my SysRq and PrtSc are on same button, and when I press Fn + Alt + [PrtSc, SysRq], the system just recognizes as Alt + PrtSc. This is weird....

Error -36 alert displays when connecting to a Windows server

Hi All
I am getting error -36 when I tried to copy any file or folder from windows server
"Error -36 alert displays when connecting to a Windows server"
Even the file info is zero KB, while from other MAC machine it is right size.

You shouldn't get the same error when you are doing it from Terminal. The error should be a little different. I just did a test. Is this a Microsoft 2003 server, 2000 or NT4 you are connecting to? Your post isn't specific. Make sure the System Preferences:Network:Advanced:WINS tab is filled in with the domain you are connecting to next to the "Workgroup" name. The WINS server should already be filled in. Open the connect window with command K. Type domainname\username for the login and then the password. If you don't want to enter the domain each time you will need to add the domain in the Applications:Utilities:Directory Uitility application.
If you are trying to connect to a Windows XP client box, the machine will automatically try to authenticate with the guest account not the username and password you are using even when "registered user" is ticked. You have to edit the registry to change this default. If the username from the Windows PC is the same as the user logon then this is why the PC is able to connect and the mac is not.

Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server

Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server
http://docs.info.apple.com/article.html?artnum=301580
A user meet the above problem connecting to Windows 2003 server but have no this error if connected to Windows 2000 Server.
According to the above solution, will you configure Windows 2003 server or just configure user's Macintosh platform?

EL2006 wrote:
Actually, win2003 server's default security options are shown as follows.
1. MS network client: Digitally sign communications (always) - Disabled
2. MS network client: Digitally sign communications (if server agrees) - Enabled
3. MS network server: Digitally sign communications (always) - Disabled
4. MS network server: Digitally sign communications (if client agrees) - Disabled
We could both be right on this one; it depends on your setup. By default, if you're running a domain then the Domain Controller is:
*Microsoft network client: Digitally sign communications (always) Policy Setting: not defined*
That defaults to the Group Policy setting, which is enabled.
The local computer group policy for Windows Server 2003 is:
*Microsoft network client: Digitally sign communications (always) Security Setting: disabled*
I'm referencing this KB article on Microsoft's website: <http://support.microsoft.com/kb/887429>.
This does not take into consideration that you may have upgraded from Windows 2000 Server to Windows Server 2003.
Regardless, you seem to have already eliminated this as a possibility as you mention below.
In my case, user can connect to win2003 server without problem in the same LAN 192.168.8.x. If connect it from remote lan 192.168.10.x (e.g. smb://192.168.8.250/artwork) error -36 will appear. Since remote lan is connected to local lan by secured VPN, all traffic or any ports are allowed to passe through VPN.
Rather than a server or client problem I would speculate your VPN connection is the problem. Do you have port TCP 445 open or blocked at your VPN concentrator? I believe this needs to be open.
Hope this helps!
bill

If i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display

because when i use the gps app in my iphone 4s in the car my iphone gets overheat so
if i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display
will that help?

When you use your GPS does your iPhone get hot enough to shutdown? The reason I ask is that I have run my GPS app with the screen brightness set to near max connected to power for hours. My iPhone got hot, but didn't shutdown.

Freeze login window when connected disk for Time-Machine

MacBook, 13-inch, Early 2008, Lion 10.7.3 (same problem on 10.7, 10.7.2)
- Freeze login window when connected disk for Time-Machine.
In logs I can see they Time-Machine finished work successfully.
I have do hardware reset every time to login my laptop.

wongkh wrote:
If connecting the time machine after windows is up,both windows and the time machine works properly.
i can access the time machine hdd in windows.
Don't, Time Machine knows nothing about Windows, and vice versa.

MBP Retina OS X Yosemite has distorted display when connected to Epson projector. How do I fix this?

MBP Retina OS X Yosemite has distorted display when connected to Epson projector. How do I fix this?

Hello ATLawson,
Welcome to the Apple Support Communities!
I understand that the display, after connecting to a projector, does not have the image quality you would expect. There may be a few different troubleshooting steps I would recommend in this situation. To begin troubleshooting, I would suggest reading over and working through the information in the attached article.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Have a great day,
Joe

IPod doesn't appear in the finder nor on the desktop when connected

Hi,
My iPod touch 2nd gen doesn't appear in the finder nor on the desktop when connected, is it normal maybe because its a flash drive and not a harddrive, I don't know...
By the way, everything is normal with iPhoto and iTunes.
Sincerely

The Touch and iPhone do not have disk mode, that is why you can't see it.

Why I can not change the display when I turn the Ipad from horizontal to vertical position ?

Please help to give me the guide line to solve the problem in my Ipad
I can not change the display when I move the ipad from horizontal position to vertical position

Have you got a lock symbol at the top of the screen next to the battery indicator ? If so, then depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can lock rotation either by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If there is no lock symbol then try a reset and see if rotates after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Transfered Videos to Library it shows on my Iphone 4s but in GREY [ on the pc when connected] and thus I cannot play the video, WHY

Transfered Videos to Library it shows on my Iphone 4s but in GREY [ on the pc when connected] and thus I cannot play the video on IPHONE 4s, WHY??

Sorry it IS ios 7.04

HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

Wallpaper with the cursor when connected to external display

Hi guys. I recently bought a MacBook 13" unibody polycarbonate white and I had bad luck and cracked the screen and I don't have the money to get it repaired so I decided to buy a mini display to VGA and hook it up to my old dell monitor.
I turned off the computer and plugged the port in and it connects to the monitor but I only see the wallpaper with the cursor and no login screen or anything. I was reading around and found out that I might have to play with the resolution to make the monitor work. Now my delimma is that my LCD screen is cracked so how can I make the monitor work without looking ?

Can you see anything on your MacBook screen? If you can access System Preferences you can drag the window over to the other screen. You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

HT1212 How can I restore my iPod touch 4G with white on the display when it has a passcode on it and I know it butI can't enter the passcode on it?

My iPod touch has white on the display. I need to restore it, but I can't enter the passcode on it. Is there any other way to type the passcode and restore it when I know the passcode?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My non retina macbook pro mid 2012 will read the display its connected to but does not display anything at all

Hi there,
I have a macbook pro mid 2012 non retina display and i tried using an external display for it. I hooked it up and the screen blacked out and turned back on like normal and the computer itself was reading that the display was there. The only problem is that on the display itself there is no image of the macbook being displayed. im using a thunderbolt to vga connector and all the connection check out the only problem is the display. the display works on my other macbook that i have just fine i dont understand why it wouldnt work on this new one. Keep in mind i have had this computer for only 5 days.
Thanks in Advance

Hi, cubingcouple.
Thank you for visiting Apple Support Communities.
I understand that your MacBook is not working with your external display. display shows a blank screen. Here is the best troubleshooting resource to go through when experiencing these symptoms.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT201177
Cheers,
Jason H.

Dynadock U3.0 freezes the display when connected

Similar Messages

Maybe you are looking for