Dynadock V Keeps Updating same driver after restart and wont connect to external monitor

Earlier this week dynadock did an update and now everytime my computer turns on it installs the same update and says successfully installed. Ever since this started my second monitor connected through dynadock is not working. I've checked cords, cycled power to everything and still the same.

Performed system restore as far back as it would allow me, but i do not believe that it was far enough. Still had same problem. I attempted to uninstall only the video driver, and it failed, so i attempted to uninstall all of dynadock and everything but video driver uninstalled it failed again. restarted tried again failed again. So i'm running the install cd now see if maybe i'll get lucky and it'll work it'self out. but i doubt it.
Any idea how to get the video driver uninstalled? I can't find it under device manager either.

Similar Messages

Time Machine Keeps Selecting Different Drive After Restart

Here is my situation, which is a bit different from most people's I think:
I have a Mac Pro running 10.5.5 with 4 internal hard drives: 250GB Original, 750GB, 750GB, and a 500GB. I also have a MacBook. I used to have things setup so that my iTunes for the Macbook was stored over the network on a 750GB drive, and the Mac Pro AND the Macbook had their Time Machine files on the 500GB.
Then I switched things around so that the iTunes is now on the 500GB and the Time Machine is on a 750GB. I used "restore" in disk utility to copy over the Time Machine files (although this worked it could only be done a specific way after much trial and error - ask for details if interested). It worked, and the Mac Pro backs up flawlessly right where it left off on the new drive.
The Macbook WILL find and load the old sparse file from its new location. But I have to manually select it EVERY TIME. The problem is that despite the fact that I completely erased the 500GB drive first, it stills defaults to that drive for TM. AND this is AFTER I have thrown out the time machine preferences from the library. It will work fine for infinite backups as long as I don't shut down the computer. As soon as I restart, it defaults back to the other drive and I have to repeat that cycle all over again of throwing out the preferences, changing the TM disk, and it is never easy to get it to "see" the drive I want...etc.
Any thoughts much appreciated!

Glenn,
Thanks so much for your reply. Unfortunately that did not work. As soon as I connect to my iTunes drive, I can see the name of the backups volume change in the TM preferences pane from "backups" (what it should be) to "music."
In the interest of presenting as much info as possible, I will add that I always have to select my iTunes folder before opening the Itunes app. I had it set up before (when drives were reversed) so that my "music" volume would open as a login item, since I was tired of doing it manually every time. The TM just mounted normally whenever it needed to. It worked perfectly. I thought that maybe I could fix this current problem by having BOTH my music and backups volumes mount at startup. Interestingly, even if I select them both, the mac will only mount one or the other, not both - in fact one of the drives disappears from the accounts>login items pane after startup as if I had never put it there! It CAN mount two drives though if I select another, third drive that I also have shared that is neither for music or backups. Just not THESE two. I am at a loss....I am pretty sure I erased these drives before making the switch - I know one of them I even wrote to zeros.... Thanks again.

After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Software Update has stalled after restart

Updates for Safari 6.2.5, iTunes 12.1.2, and Security Update have stalled after restarting the computer on Mini i7 10.8.5. – the progress bar hangs at ~75% through. What should I do?

Unfortunately, I am past being able to do that b/c the computer has restarted and all I have is the little 'Installing Software Update' window on a gray hatched background without any buttons or controls to use. I tried send a photo of the screen but now iPhoto on my MBPi7 10.8.5 crashes after failing to load the images from my iPhone 5c. The MBP has 'successfully' installed the same updates I am having trouble with on my Mini – something is really fracked up with these updates!
What shall I do with my Mini? – I do not know if force power down in mid-update will destroy my OS and data.

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL

When i hold down command and r at the same time after restarting it comes up with a

When i hold down command and r at the same time after restarting it comes up with a black screen and a lock symbol and a field bellow where you would input a password, i have tried ALL of my possible passwords including my password i use for the mac and it stil will not work! all that happens is the text i put in bellow erases itself after hiting enter or clicking the arrow.

I've tried my apple ID password and that doesn't work either . I don't recall seting a password for an encrypted disk either :/ if it was for an encrypted disk, would it be in keychain anywhere? if so how can i find it?
Thanks!

How to keep my created network after restart

hi,
my mac mini is just used to be connected to a videoprojector. so i don t connect a screen or mouse, keyboard or else.
i have access to it through the wireless network i created on the macmini.
but if i restart the macmini, the network is gone and i have to connect mouse keyboard, sceen, to re create the network!
my problem is that i only have access to my mac mini by wireless network . but i don t want to share internet access. just have a network between two macs , to access to one with share screens.
If i create a network, and then restart, the network is gone. it disappears.
so if i restart my mac mini via screenshare , there is no network. and i can t have access to the mac mini anymore.
how can i keep this created network after restart?
i tried to make it work with automator but kind of didn t make it to work

Do you keep other settings (e.g. in Options) that you make in Firefox?
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

My Mac keeps freezing at a gray screen, and wont take me to my desktop. How do i fix this? Ive tried shutting down and restarting a bunch of times

My mac keeps freezing at a gray screen and wont take me to my desktop. Ive tried restarting it, but it wont work. Its my fault, i shouldve done the IOS update! Someone please help

Grey Screen and spinning wheel at startup
http://support.apple.com/kb/PH11044
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reinstall OS X
http://support.apple.com/kb/PH10763?viewlocale=en_US

HT201263 after restarting and restoring ipod touch, display is still white screen

after restarting and restoring ipod touch, display is still white screen. I have done this several times. One time, the display went to the home screen, but immediately went back to the white screen when I plugged it into the charge cord. The music continued to play however. help!

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

Hello, do you have another admin account to log into for a test?

Was updating to ios6 phone froze and wont restart, was updating to ios6 phone froze and wont restart

was updating to ios6 phone froze and wont restart, was updating to ios6
tried holding down button at top
also tried holding down home button

Try holding both down for 15seconds

My ipad2 keep on freezing even after restoration and upgrade to software version5.what do i do?

my ipad2 keep on freezing even after restoration and upgrade to ios5. what do i do?

Simon...
If you restored from a backup, the backup may be corrupted.
Try Restoring as a new device

HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.

easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.

Those are the options - more space is more space.
Moving the iPhoto Library is simple:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

I have the right update of itunes but my iphone wont connect to itunes? What do i do?

I have the right update of itunes but my iphone wont connect to itunes? What do i do?

Hi jskills,
If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may want to take a look at the troubleshooting steps in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Brenden

Dynadock V Keeps Updating same driver after restart and wont connect to external monitor

Similar Messages

Maybe you are looking for