Dynamic Assignemnt of OFF when employee not at work

Hi,
I have a scenerio wherein based on the clock-in the Daily work schedule is to be assigned. This is being done through assign daily work schedule dynamically.
My requirement is when the employee's are not at work, the system should dynamically assign OFF if there is no clock-in.
How can this be done. The PCR TD30 for assign DWS dynamically is only to generate messages.
Moreover how can I change the PSP table.
Regards,
Vijay.

Hi Skindar,
If there is not update in IT2001 or IT 2002 then it will be an OFF.
Regards,
Vijay

Similar Messages

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

Today on the way to work it was raining heavily when i got to work my coat and pocket was soaked with my i phone 5 in it i took it out and wiped the screen off when i got to work and put it in my bag the likfe was on like 50% when i go on my break like 4

today on the way to work it was raining heavily when i got to work my coat and pocket was soaked with my i phone 5 in it i took it out and wiped the screen off when i got to work and put it in my bag the likfe was on like 50% when i go on my break like 4 hours later my phone is dead and would not turn on for a while when it did it had some writting in the top left corner ive tried resseting my phone on i tunes and nothing has helped and the phone is relatively brand new so i need HELP?

Hi Tone96,
Based on your description, it sounds like you may need to have your iPhone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden

Dynamic TextArea cut-off when scrolling

I have a fixed size for the text area, and using html
formating.
The top CSS will not format the margin or padding.
Also the last paragraph of text gets cut=off half way through
it.
I thought I saw something in the doc but I can't find it now.
Anybody had this problem?

With html = true:
Padding on top and the bottom does not seem to work but on
the sides it does work.
The cut-off text was due to using the & symbol in html
tagged as &
The cause the text to end. Simply removed it and used "and"
then it worked.
The space for the first row needs white space so inside the
html tag just line feed
down one and all looks fine.
How this helps someone else.

Early 2011 Macbook Pro shuts off when charger unplugged. Worked fine yesterday.

Hi,
I have an early 2011 Macbook Pro, which I purchased brand new; it's just over one year old. Yesterday the laptop held a charge no problem for 6 hours or more. Today, when I disconnect it from the charger it goes to sleep. When I plug it back in and press the power button it wakes up, and I can use it.
This cannot be a battery issue, since it was holding a charge without trouble yesterday. Does this appear to be a serious issue? My one year warranty expired 2 months ago yesterday, and I had forgot to purchase AppleCare. Sigh. It almost seems like surgically-planned obsolecense or punishment for not purchasing AppleCare.
I would immensely appreciate any help/suggestions on this.
Thanks.

OK, in that case:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.
Upgrading to Lion or Mountain Lion will not solve the problem.

Quota deduction when EE has been inactive for more than 180 days / Advance quota days when employee does not have enough balance

Dear experts,
We have two requirements regarding to the "Anual leave" quota.
1. Quota reduction when employee is inactive for more than 180 days
2. Advance quota days when employeee does not have enough balance
We have in place an "Anual Leave" quota related to a calendar year period, that gets generated dialy in time evaluation. This quota gets the employee entitlement from a set of rules that stored the corresponding balance in a period time type, that is the one that we defined in the customizing. This is working fine. The problems start when we try to incorporate the other two requirements.
Regarding the first requirement, if the employee has been inactive for more than 180 days in a calendar year due to unpaid leave, we need to start quota reduction as follow,
First, we need to clear the balance that was calculated above in the schema.
Then, we need to calculate one leave day for every 20 days worked till the end of the year, considering as such, everyday the employee is expected to work, except days on which the employee has been absent on unpaid leave.
For the second requirement we created a manual quota call "Advance Anual Leave". So, if the employee, wishes to take 20 working days holiday, but in his/her Anual Leave quota has only 10 days available, we have to create an "Advance Anual Leave" quota manualy for 10 days. When the quota for next year gets generated, we need to deduct these advanced 10 days from it. This deduction should stop the year after.
The problem we are finding with these two requirements is that, due to the Anual Leave quota gets generated dialy, we can't get the balance right.
Thanks in advance!
Kind regards,
Alex

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
Thanks

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.

Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

My iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?

my iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?

If the battery was empty (and it may then take 10 to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

You should be able to select Force Quit from the menu beneath the Apple icon in Finder
and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
OS X - Support
Not sure if rebuilding the iPhoto library would help this issue. However if you had to
turn off the computer without the correct method (unplug, etc; instead of menu choice)
the system may have accrued damages and should be checked, maybe repaired by
use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
run 'repair disk permissions' while it is running in that reduced mode; then restart after.
•Understanding Safe Mode - tuts+ computer skills tutorial:
http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
•OS X: What is Safe Boot, Safe Mode?
Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
There likely are other means to rectify troublesome applications, including reinstall.
Be sure to backup your music, image, video, and other work on an external drive
or suitable device as a precaution against loss should there be a hard drive failure.
iPhoto - Mac Apps - Apple Support
There should be some tips and help information using iPhoto via this tiny Support link.
Good luck & happy computing!

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

Hi there 8472kck!
I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
and that information comes from this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Dynamic Assignemnt of OFF when employee not at work

Similar Messages

Maybe you are looking for