Dynamic backgroundcolor doens't work
Hello,
How can you set the backgroundColor (of a vbox) to a
data-field ? I tried this, but it stays black ...
backgroundColor="{data.showcolor}"
Best regards,
Frank
Andre,
Is there an important reason your are using an alias for that field? Have you tried it without?
I'm not a pro at complex querys like you have here, but from looking at this query I don't see why you need an alias.
From what I know, alias are good for the following reasons:
Avoiding any reserved (used by MySQL) words.
Allowing Multiple Joins to the same table
Allowing Self-Joins
Assigning the result of MySQL function to a temporary column name.
Doing a little googling got me this page:
http://dev.mysql.com/doc/refman/5.0/en/problems-with-alias.html
According to that page:
"Standard SQL doesn't allow you to refer to a column alias in a WHERE clause. This restriction is imposed because when the WHERE code is executed, the column value may not yet be determined."
So I think you'll have to skip using the alias and try something else.
Shane
Similar Messages
-
Event double -click doens't work
Dear All,
Pls help event double -click doens't work.
What can the reason be for it ?
Regards
Ilhan
data tree1 type ref to cl_gui_alv_tree.
data mr_toolbar type ref to cl_gui_toolbar.
include <icon>.
data: gt_sflight type ZQMCOMP occurs 0, "Output-Table
gt_fieldcatalog type lvc_t_fcat, "Fieldcatalog
ok_code like sy-ucomm. "OK-Code
* TREE_EVENT_RECEIVER *
class tree_event_receiver definition.
public section.
methods on_doubleclick
for event link_click of cl_gui_alv_tree
importing node_key fieldname.
ENDCLASS. "lcl_handler DEFINITION
* CLASS tree_event_receiver IMPLEMENTATION
class tree_event_receiver implementation.
METHOD on_doubleclick.
MESSAGE I000(38) WITH fieldname.
ENDMETHOD. "on_doubleclick
endclass.
start-of-selection.
end-of-selection.
call screen 100.
*& Module PBO OUTPUT
* process before output
module pbo output.
set pf-status 'MAIN100'.
if tree1 is initial.
perform init_tree.
endif.
call method cl_gui_cfw=>flush.
endmodule. " PBO OUTPUT
*& Module PAI INPUT
* process after input
module pai input.
case ok_code.
when 'EXIT' or 'BACK' or 'CANC'.
perform exit_program.
when others.
call method cl_gui_cfw=>dispatch.
endcase.
clear ok_code.
call method cl_gui_cfw=>flush.
endmodule. " PAI INPUT
*& Form build_fieldcatalog
* build fieldcatalog for structure sflight
form build_fieldcatalog.
data: ls_fieldcatalog type lvc_s_fcat.
ls_fieldcatalog-fieldname = 'DUNS'.
ls_fieldcatalog-col_pos = 7.
ls_fieldcatalog-coltext = 'Duns'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MONAT'.
ls_fieldcatalog-col_pos = 8.
ls_fieldcatalog-coltext = 'Monat'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ZE'.
ls_fieldcatalog-col_pos = 13.
ls_fieldcatalog-coltext = 'Ze'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MATKOSTEN'.
ls_fieldcatalog-col_pos = 14.
ls_fieldcatalog-coltext = 'Mat.Kosten'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ANTEIL'.
ls_fieldcatalog-col_pos = 15.
ls_fieldcatalog-coltext = 'Anteil'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESMAT'.
ls_fieldcatalog-col_pos = 16.
ls_fieldcatalog-coltext = 'Ges.Mat'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESLOH'.
ls_fieldcatalog-col_pos = 17.
ls_fieldcatalog-coltext = 'Ges.Lohn'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESAMT'.
ls_fieldcatalog-col_pos = 19.
ls_fieldcatalog-coltext = 'Gesamt'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
call function 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ZQMCOMP'
CHANGING
ct_fieldcat = gt_fieldcatalog.
endform. " build_fieldcatalog
*& Form build_hierarchy_header
* build hierarchy-header-information
* -->P_L_HIERARCHY_HEADER strucxture for hierarchy-header
form build_hierarchy_header changing
p_hierarchy_header type treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy-Kopf'. "#EC NOTEXT
p_hierarchy_header-tooltip =
'Hierarchy-Kopf !'.
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
endform. " build_hierarchy_header
*& Form exit_program
* free object and leave program
form exit_program.
call method tree1->free.
leave program.
endform. " exit_program
*& Form build_header
* build table for html_header
* --> p1 text
* <-- p2 text
form build_comment using
pt_list_commentary type slis_t_listheader
p_logo type sdydo_value.
data: ls_line type slis_listheader.
clear ls_line.
ls_line-typ = 'H'.
ls_line-info = 'LIBOLO '.
append ls_line to pt_list_commentary.
clear ls_line.
clear ls_line.
ls_line-typ = 'A'.
ls_line-info = 'Liste'.
append ls_line to pt_list_commentary.
* p_logo = 'ENJOYSAP_LOGO'.
endform.
* FORM create_hierarchy *
FORM create_hierarchy.
data: ls_sflight type ZQMCOMP,
lt_sflight type ZQMCOMP occurs 0.
* get data
select * from ZQMCOMP into table lt_sflight.
* sort lt_sflight by carrid connid fldate.
* add data to tree
data: l_carrid_key type lvc_nkey,
l_connid_key type lvc_nkey,
l_last_key type lvc_nkey.
loop at lt_sflight into ls_sflight.
on change of ls_sflight-KUNDE.
perform add_carrid_line using ls_sflight
changing l_carrid_key.
endon.
on change of ls_sflight-MONAT.
perform add_connid_line using ls_sflight
l_carrid_key
changing l_connid_key.
endon.
perform add_complete_line using ls_sflight
l_connid_key
changing l_last_key.
endloop.
* calculate totals
call method tree1->update_calculations.
* this method must be called to send the data to the frontend
call method tree1->frontend_update.
endform. " create_hierarchy
*& Form add_carrid_line
* add hierarchy-level 1 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_carrid_line using ps_sflight type ZQMCOMP
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
ls_sflight type ZQMCOMP.
* set item-layout
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style =
cl_gui_column_tree=>style_intensifd_critical.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-KUNDE.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_carrid_line
*& Form add_connid_line
* add hierarchy-level 2 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_connid_line using ps_sflight type ZQMCOMP
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
ls_sflight type sflight.
* set item-layout
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3Y@'.
ls_item_layout-style =
cl_gui_column_tree=>style_intensified.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-MONAT.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_connid_line
*& Form add_cmplete_line
* add hierarchy-level 3 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_complete_line using ps_sflight type ZQMCOMP
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value.
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
append ls_item_layout to lt_item_layout.
l_node_text = ps_sflight-QMART.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
is_outtab_line = ps_sflight
i_node_text = l_node_text
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_complete_line
*& Form register_events
* text
* --> p1 text
* <-- p2 text
form register_events.
data: lt_events type cntl_simple_events,
l_event type cntl_simple_event.
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
append L_EVENT to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
append L_EVENT to lt_events.
* set Handler
data: l_event_receiver type ref to tree_event_receiver.
create object l_event_receiver.
set handler l_event_receiver->on_doubleclick for tree1.
call method tree1->set_registered_events
exporting
events = lt_events
exceptions
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
endform. " register_events
*& Form change_toolbar
* text
* --> p1 text
* <-- p2 text
form change_toolbar.
* get toolbar control
call method tree1->get_toolbar_object
importing
er_toolbar = mr_toolbar.
check not mr_toolbar is initial.
* add seperator to toolbar
call method mr_toolbar->add_button
exporting
fcode = ''
icon = ''
butn_type = cntb_btype_sep
text = ''
quickinfo = 'This is a Seperator'. "#EC NOTEXT
* add Standard Button to toolbar (for Delete Subtree)
call method mr_toolbar->add_button
exporting
fcode = 'DELETE'
icon = '@18@'
butn_type = cntb_btype_button
text = ''
quickinfo = 'Delete subtree'. "#EC NOTEXT
* add Dropdown Button to toolbar (for Insert Line)
call method mr_toolbar->add_button
exporting
fcode = 'INSERT_LC'
icon = '@17@'
butn_type = cntb_btype_dropdown
text = ''
quickinfo = 'Insert Line'. "#EC NOTEXT
endform. " change_toolbar
*& Form init_tree
* text
* --> p1 text
* <-- p2 text
FORM init_tree.
* create fieldcatalog for structure sflight
perform build_fieldcatalog.
* create container for alv-tree
data: l_tree_container_name(30) type c,
l_custom_container type ref to cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
if sy-batch is initial.
create object l_custom_container
exporting
container_name = l_tree_container_name
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
endif.
* create tree control
create object tree1
exporting
parent = l_custom_container
node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
item_selection = 'X'
no_html_header = ''
no_toolbar = ''
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
* create Hierarchy-header
data l_hierarchy_header type treev_hhdr.
perform build_hierarchy_header changing l_hierarchy_header.
* create info-table for html-header
data: lt_list_commentary type slis_t_listheader,
l_logo type sdydo_value.
perform build_comment using
lt_list_commentary
l_logo.
* repid for saving variants
data: ls_variant type disvariant.
ls_variant-report = sy-repid.
* create emty tree-control
call method tree1->set_table_for_first_display
exporting
I_STRUCTURE_NAME = 'ZQMCOMP'
is_hierarchy_header = l_hierarchy_header
it_list_commentary = lt_list_commentary
* i_logo = l_logo
i_background_id = 'ALV_BACKGROUND'
i_save = 'A'
is_variant = ls_variant
changing
it_outtab = gt_sflight "table must be emty !!
it_fieldcatalog = gt_fieldcatalog.
* create hierarchy
perform create_hierarchy.
* add own functioncodes to the toolbar
perform change_toolbar.
* register events
perform register_events.
* adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM. " init_treeHi,
to do so, you need to declare those fields in the form CREATE_HIERARCHY.
For example, to add FLDATE node, you should do:
ON CHANGE OF LS_SFLIGHT-CARRID.
PERFORM ADD_CARRID_LINE USING LS_SFLIGHT
CHANGING L_CARRID_KEY.
ENDON.
ON CHANGE OF LS_SFLIGHT-CONNID.
PERFORM ADD_CONNID_LINE USING LS_SFLIGHT
L_CARRID_KEY
CHANGING L_CONNID_KEY.
ENDON.
ON CHANGE OF LS_SFLIGHT-FLDATE.
PERFORM ADD_FLDATE_LINE USING LS_SFLIGHT
L_CONNID_KEY
CHANGING L_FLDATE_KEY.
ENDON.
ON CHANGE OF LS_SFLIGHT-PRICE.
PERFORM ADD_PRICE_LINE USING LS_SFLIGHT
L_FLDATE_KEY
CHANGING L_PRICE_KEY.
ENDON.
and then create the new FORMS PERFORM ADD_PRICE_LINE and
PERFORM ADD_FLDATE_LINE by copy of the existent
PERFORM ADD_CONNID_LINE and change the L_NODE_TEXT in the form.
I suposed you are new to ALV's, so i have a sugestion for you.
Instead of CL_GUI_ALV_TREE try to use some examples of CL_GUI_ALV_TREE_SIMPLE. It's much more simple to understand and to work with. For example Report BCALV_TREE_SIMPLE_DEMO.
In this case, to add more nodes to the the you just need to add 3 lines of code in
perform build_sort_table.
Regards, -
Why Dynamic Parameter is not working, when i create report using stored procedure ?
Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kantHi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
My Ipod touch 5 just stopped working. The screen got black and now I can't use it or start it.
I have tried to charge it but it doens't start and when I tried to connect it with my computer it didn't work either.
I saw that you could hold down the "home" button and the "power" button at the same time but my home button doens't work so I can't do that.
Is there any other way I can fix it or do I have to go to an apple store?Try:
Turn on without Home/Power Button -
My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.
What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
-
SKY go app but doens't work. There is a problem with iOs 6. What I can do
I have an iPad I tried to use SKY go app but doens't work. There is a problem with iOs 6. What I can do
The App says that there is not internet connection, even if I'm connected.
-
After My IPod Touch 4th Geneartion was broken I had to fix the screen, which cost me a lot, after a perfect restore through the ITunes I went to connect to my IPod to the WiFi network then the WiFi ON/OFF button Doen't Work, the IPod doesn't show the on/off button in the Settings-> General -> WiFi.
And another problem I encountered during this operation was that the Games I downloaded through the ITunes doesn't work, when I click on the icon ( Game Icon) it starts an then closes in a few secondsSee:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Apple wil not help since yo took the iPod apart
Try taking it apart and look for a disconnected antenna.
Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit -
Crystal Reports dynamic parameter does not work in InfoView
Hello,
We have developed Crystal Reports in CR2008 on top of SAP infoset and we have one of our selection parameter as dynamic parameter. It works fine in the CR Dev tool but when i upload the report in the InfoView, report does not show any value in the "Available Values"
Any input will be much appreciated.
Thanks.I did found the solution for this, i had to go into Business View Manger (BO Client Tools) and Schedule the LOV (List of Values). This is odd setting! but it works....
-
Dynamic Streaming only can work in localhost.
Could anybody tell me why the dynamic streaming can only work in the host machine but not others?
Is it related to my setting? I install the latest version of apache before the FMS4. After the installation completed,
I copied webroot, applications and other files to the web sites home directory. I also updated the FMS.ini file in the config
folder. Because I am not familiar with FMS, I don't know whether the change is correct or not. Can any expert share his/her
experience to me. Thank you very much.There is no such restriction that Dynamic Streaming would work only on localhost.
Are you saying after installing FMS4, you installed your own Apache and changed settings to point to this Apache? Also had you installed FMS4 with Apache or without Apache?
I copied webroot, applications and other files to the web sites home directory ??? - What do you mean by this - which applications and what was the reason for copying them to home directory of website - what is this website you are talking - is it same as your new apache installation? -
My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good
I suspect someone or something in your house may have changed a keyboard preference. Try System Preferences - Keyboard - Keyboard tab - uncheck Use all F1......
-
Hello there, i'm new on pls/sql, so i wanted to do a procedure which execute a grant select on all tables from a specific schema, the name of the schema is TESO, and i'm creating that procedure in ASILVA schema.
The problem is when i try to execute the procedure, it doens't work it show me a message like
Informe de error:
ORA-00942: la tabla o vista no existe
ORA-06512: en "ASILVA.GRANT_SELECT_ON_TABLE_SCHEMA", línea 6
ORA-06512: en línea 1
00942. 00000 - "table or view does not exist"
*Cause:
*Action:
that is when i execute: execute GRANT_SELECT_ON_TABLE_SCHEMA
This is my procedure, and i didn't have any problem when i created it:
CREATE OR REPLACE PROCEDURE GRANT_SELECT_ON_TABLE_SCHEMA
AS
BEGIN
FOR x IN (select * from dba_tables where owner ='TESO')
LOOP
EXECUTE IMMEDIATE 'GRANT SELECT ON TESO.'|| x.table_name ||' TO fswbd';
END LOOP;
END GRANT_SELECT_ON_TABLE_SCHEMA;
Please if anyone can help my, i would be gratefull.
Edited by: Ng! on 21-dic-2011 14:39
Edited by: Ng! on 21-dic-2011 14:39
Edited by: Ng! on 21-dic-2011 14:40That the user can select from the tables is irrelevant to whether they have permission to access them via PL/SQL.
SQL respects privileges granted via roles ... PL/SQL requires explicit grants. -
GPS doen't work (Nokia 5230)
I bought this phone mainly because it's big screen and GPS.
But it just doen't work. At all.
I left only GPS connection (A-GPS, Network etc. - are off).
In Satellites-Status is finds sometimes up to 5 satellites with gray bars. (as I understand it means weak signal) and then nothing happens.
Last night I went to railway station, which is high. The sky was absolutely clear with stars.
No high buildings around. I holded the phone in the center (not to cover the antenne).
And nothing happened. Only 4-5 gray bars maximum. Even after 10 minutes.
I'm thinking about sending it back.
Another problem - is one of the most stupidest programs I've ever seen - OVI-Suit.
Absolutely illogical, insanely slow and fulled with mistakes.
(The only program which is worse is Corel Draw Painter).
And please, tell me someone, why the Options for GPS are in the Menu-> Applications-> My Position-> Options,
but the Maps themselfs are in Menu-> Maps?
I've heard just yesterday, that Nokia looses its market share very fast.
And somehow I understand why.Hi DexterStJock
If you are not going to utilize the Assisted GPS feature and rely solely on Integrated GPS you can expect initial positional fix to take a considerable time to acquire but subsequent lock-on will be much more rapid. If you haven't yet got a satellite lock-on don't expect a new location to be better as you could be anywhere in the world as far as it is concerned. Unfortunately GPS antenna size within a mobile device has to be compromised due to space limitations and unfair to compare with car sat nav unit.
You are correct that "Positioning methods" are found in Menu > Applications > Location but this is independent of OVI Maps as other applications can utilize it's features.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Adobe Dynamic Link will not work - Premiere Pro CS4 to After Effects CS4
Hello,
I am edited a video with a deadline, I'm importing a sequence from Premiere Pro CS4 to After Effects and making edits in After Effects. I'm able to import the Premiere Pro sequence into After Effects using Dynamic Link, but I go back to Premiere Pro and nothing has changed. Then I have to export the 21 minute long video in After Effects and that takes about 12 hours, that I can't afford. I don't know what I'm doing wrong, before I imported the timeline into AE, while I was in Premiere Pro I right clicked it and selected -Edit original. It took me to the .mov that I imported- since it's a redo. I learned how to use Dynamic Link from this tutorial-
http://tv.adobe.com/watch/learn-cs4-production-premium/using-dynamic-link/
At first when Dynamic link didn't work I thought it was because I was cutting the imported Sequence from Premiere Pro in After Effects becasue I was motion tracking. When you import a Premier Pro sequence can you cut it into individual layers in After Effects?I'm importing a sequence from Premiere Pro CS4 to After Effects
That doesn't create the type of Link you want here. In this case, changes made to PP would show up in AE. You want the reverse. (And you can only go one way, not both.)
http://help.adobe.com/en_US/PremierePro/4.0/WS725e431141e7ba651172e081238226cdf5-8000.html -
Trying to edit Audio from Premiere Pro within Audition thru the Dynamic link but it does not fire up Audition to edit. Seems like a common problem/bug. But no one has posted a solution. Please Help
-Windows 7
-Premiere Pro CC 2014
-Adobe Audition CC 2014You dont understand it was all working fine in the previous Adobe versions. matter of fact you can go on youtube and see a couple of videos that shows the work flow between Premiere Pro and audition by way of Dynamic link. If you edit a video clip in Premier Pro and want to add some music or simply edit the audio that is contained in the video there was a time within Premiere Pro you can just right click "Edit in Adobe Audition" and Audition would open with the audio clip in place. Much in the same way Premiere Pro works with After Effects thru the Dynamic Link. The Dynamic Link is the bridge between applications to work with each other. For some reason Premiere Pro and Audition Dynamic Link is not working properly.
-
CTRL + F for folders doen't work in CS5
Hi,
When I used my CS 3 Dreamweaver, I could click in the folder list on a folder an pressd CTRL + F so I could search a word in this folder and all subfolder.
But since I upgraded to CS 5 it doen's work anymore.
I alway have to set the folder manually.
Thanks for help
pwIt's a known issue. Hopefully, it will be fixed in an updater (if there is one) or the next version.
Maybe you are looking for
-
Anyone,, please help me... I have one problem.. In my Database, I have 260,000,000 records.. Then, I execute this query : Select name, gender, phone, address ,bla bla bla from table_name where name like '%sa%' and gender = 'male' and mother's_name li
-
Why won't Firefox open an site in a new tab when clicked on in Google?
When I was in Google and would click on a site to open, it would open in the tab I was on rather than opening in a new tab. It used to do so. So if I go to the site and it's not the one that answers my question, rather than clicking on the back butto
-
Itunes is not sharing (or anything else) properly
iTunes is really beginning to bum me out to the highest level of bumtivity. I have a MacMini running OS X 10.7.3 (fully updated). I run iTunes on it and it acts as a sort of media server for me. Until recent iTunes updates it's worked flawlessly. I c
-
Hi folks, I have a basic question. I want to store data in Java card of each transaction in a log file. Each record contains some information. I'm wondering how to create this kind of file on java card and update log file for each new transaction. Su
-
Does JaxB support inported schemas?
hi i'm trying to compile the CD_DataBase.xsd schema (using the JaxB that I got from the JWSDP found at Sun's site) which references to an Album element in Album.xsd For some reason, my xjc task falls when trying to read the imported schema. here are