Dynamic Calc in Multicurrency Application

Hi,
i have a multicurrency application in my version 11.1.1.1. All dimension members of my Entity are of Store type. But in one case i need the children to be added up and stored into their parent member. Accordingly when i made the parent Dynamic Calc and Store and used it in a data form. But when i give data it does not calculate the children, it gives ar error message-
The dataform is not valid, pls check log....
Any help to resolve this?
Thanks.

Hi,
I am not sure of the error you are getting but do you have have the members as dynamic calc and store, could you not set them to "Never Share" and then just aggregate the children using calc members on form or using a business rule to run after the data in the form has been entered?
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

How to create dynamic calc account in multi-plan type application

Hi expert,
I have a planning application with 3 plan types.
I created a calculation script which fixed on accounts in plan type 1 only and the calculation suppose to calculate a "dynamiccalc" account with a member formula attached. Everytime I run the script, it takes very long time and I found there are sessions at the back of essbase with "Process local xref/xwrite request" request to other plan types.
It does not has this kind of session if I change the account to "store".
Would like to check, is it possible to create a dynamic calc account to calculate for only 1 plan type in a multi-plan type application? Is there any special setting that I need to do to enable this? I already selected source plan type as Plan type 1 for my dynamic calc account. Please help!
Many thanks!!
My HP application is on version 11.1.2.1.

Hi Jake,
Thanks for pointing out the check box. Overlooked it and the checkbox was not unchecked, even I only wanted the account to exist in 1 of the plan type.
However, after I unchecked and refresh now, when I run the calc script, it still trigger process at the back to the other 2 plan types with "Process local xref/xwrite request" request. What else could I have missed?
I already added the "HSP_Nolink" UDA to all accounts in plan type 2 and plan type 3 and confirmed that there's no account with "Xref" member formula, I really don't know why it is trying to process local xref request. Can anyone help??
Many thanks!!!

Problem at calculation time, when using Dynamic Calc measures

Hello, We are using Essabse v6.5 and we want to upgrade to v7.1. we are performing some tests, in order to check that the Cubes we have created in 6.5 are working properly in v7.1. the problem that we are experiencing is that the calculation time for the cubes that have dynamic calc members has exploaded to 10 times more, compared to what it took at version 6.5. Do you have any idea why this happens. (also we are still using the old client "Application Manager") Furhermore, I have set up 2 cubes that are the same, except the 1st has dynamic calc memebers, whereas the 2ns has not. I perform calcualtions with the SET MSG DETAIL; and receive the following: CUBE (A) with Dynamic Calc Total Block Created: [4.3720e+03] Blocks Sparse Calculations: [8.0620e+03] Writes and [2.5338e+05] Reads Dense Calculations: [2.8000e+01] Writes and [2.8000e+01] Reads Sparse Calculations: [6.0202e+06] Cells Dense Calculations: [1.1476e+06] Cells CUBE (B) withOUT Dynamic Calc Total Block Created: [4.3720e+03] Blocks Sparse Calculations: [4.3720e+03] Writes and [3.5887e+04] Reads Dense Calculations: [2.8000e+01] Writes and [2.8000e+01] Reads Sparse Calculations: [6.0202e+06] Cells Dense Calculations: [1.1476e+06] Cells Question: Why does Cube (A) has more Sparse Calculations than Cube(B) ???? thanx

Yes, all the settings were exactly the same. See following: - Data Cache (note: we are NOT using the Data File Cache) - Index Cache - Index Page - Commit Block Interval - Cache memory Locking - Access Mode = buffered IO - Data Compression = Bit-Map encoding - Two Pass Calculatino = ON - Aggregate Missing Values = ON - CFG file Is there any new settings in 7.1 that I must configure? Is there any settings that I cannot see through the old client Application Manager, which is important? Must I install the new client in order to be able to configure correctly the Outline/Cube? Thnkx

Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks

Dear All,
I get the Following Error in the Essbase console when I try to Execute any CalcScript.
Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting)_+
Please find the detailed output of the Statics of my Planning Applications Database and outline.
please help guys........
GetDbStats:
-------Statistics of AWRGPLAN:Plan1 -------
Dimension Name Type Declared Size Actual Size
===================================================================
HSP_Rates SPARSE 11 11
Account DENSE 602 420
Period DENSE 19 19
Year SPARSE 31 31
Scenario SPARSE 6 6
Version SPARSE 4 4
Currency SPARSE 10 10
Entity SPARSE 28 18
Departments SPARSE 165 119
ICP SPARSE 80 74
LoB SPARSE 396 344
Locations SPARSE 57 35
View SPARSE 5 5
Number of dimensions : 13
Declared Block Size : 11438
Actual Block Size : 7980
Declared Maximum Blocks : 3.41379650304E+015
Actual Maximum Blocks : 1.87262635317E+015
Number of Non Missing Leaf Blocks : 10664
Number of Non Missing Non Leaf Blocks : 2326
Number of Total Blocks : 12990
Index Type : B+ TREE
Average Block Density : 0.01503759
Average Sparse Density : 6.936782E-010
Block Compression Ratio : 0.001449493
Average Clustering Ratio : 0.3333527
Average Fragmentation Quotient : 19.3336
Free Space Recovery is Needed : No
Estimated Bytes of Recoverable Free Space : 0
GetDbInfo:
----- Database Information -----
Name : Plan1
Application Name : AWRGPLAN
Database Type : NORMAL
Status : Loaded
Elapsed Db Time : 00:00:05:00
Users Connected : 2
Blocks Locked : 0
Dimensions : 13
Data Status : Data has been modified
since last calculation.
Data File Cache Size Setting : 0
Current Data File Cache Size : 0
Data Cache Size Setting : 3128160
Current Data Cache Size : 3128160
Index Cache Size Setting : 1048576
Current Index Cache Size : 1048576
Index Page Size Setting : 8192
Current Index Page Size : 8192
Cache Memory Locking : Disabled
Database State : Read-write
Data Compression on Disk : Yes
Data Compression Type : BitMap Compression
Retrieval Buffer Size (in K) : 10
Retrieval Sort Buffer Size (in K) : 10
Isolation Level : Uncommitted Access
Pre Image Access : No
Time Out : Never
Number of blocks modified before internal commit : 3000
Number of rows to data load before internal commit : 0
Number of disk volume definitions : 0
Currency Info
Currency Country Dimension Member : Entity
Currency Time Dimension Member : Period
Currency Category Dimension Member : Account
Currency Type Dimension Member :
Currency Partition Member :
Request Info
Request Type : Data Load
User Name : admin@Native Directory
Start Time : Mon Aug 15 18:35:51 2011
End Time : Mon Aug 15 18:35:51 2011
Request Type : Customized Calculation
User Name : 6236@Native Directory
Start Time : Tue Aug 16 09:44:10 2011
End Time : Tue Aug 16 09:44:12 2011
Request Type : Outline Update
User Name : admin@Native Directory
Start Time : Tue Aug 16 10:50:02 2011
End Time : Tue Aug 16 10:50:02 2011
ListFiles:
File Type
Valid Choices: 1) Index 2) Data 3) Index|Data
>>Currently>> 3) Index|Data
Application Name: AWRGPLAN
Database Name: Plan1
----- Index File Information -----
Index File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.ind
File Type: INDEX
File Number: 1 of 1
File Size: 8,024 KB (8,216,576 bytes)
File Opened: Y
Index File Size Total: 8,024 KB (8,216,576 bytes)
----- Data File Information -----
Data File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.pag
File Type: DATA
File Number: 1 of 1
File Size: 1,397 KB (1,430,086 bytes)
File Opened: Y
Data File Size Total: 1,397 KB (1,430,086 bytes)
File Size Grand Total: 9,421 KB (9,646,662 bytes)
GetAppInfo:
-------Application Info-------
Name : AWRGPLAN
Server Name : GITSHYPT01:1423
App type : Non-unicode mode
Application Locale : English_UnitedStates.Latin1@Binary
Status : Loaded
Elapsed App Time : 00:00:05:24
Users Connected : 2
Data Storage Type : Multidimensional Data Storage
Number of DBs : 3
List of Databases
Database (0) : Plan1
Database (1) : Plan2
Database (2) : Plan3

ESM Block Issue
Cheers..!!

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

Substitution variable in Dynamic Calc

Hi,
We are using Essbase 9.3.0 on Windows and are seeing this behavior in our BSO cubes.
When we use a substitution variable in a Scenario member with Dynamic Calc (not store) setting, after the first retrieve, if we change the value of the substitution variable, the subsequent retrieves do not generate updated results.
I suspect that the value is cached in the Dynamic Calculator Cache, and for some reason does not track changes in Substitution Variables to know that the value must be re-calculated. Here is what I see in the Application log -
[Mon Aug 09 10:31:51 2010]Local/App1/db1/user1/Info(1020055)
Spreadsheet Extractor Elapsed Time : [0.032] seconds
[Mon Aug 09 10:31:51 2010]Local/App1/db1/user1/Info(1020082)
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [4] non-Dyn.Calc.Cache : [0]
This says that 4 blocks were used from the Dynamic Calc Cache, and none from outside it. Does this mean that existing blocks were read and not re-populated?
If I make a change to the formula, wherein I hard code the value of the sub var and perform the retrieve, then the value is updated. Subsequent retrieves, after restoring the formula still returns the updated results.
My question is, is this expected behavior? Or am I doing something /reading something wrong?
Thanks,
Andy

when a subst variable value is changed... to use the value in member formula or calc script, the concerned application has to be restarted...
- Krish

Data not replicated with partition and dynamic calc

HI
I am using Essbase 11.1.2.1.
I want to use a replicated pratition wetween two Essbase BSO applications.
But in my source application, I have to send an account ACCOUNT (level 1) with several stored members and 1 dynamic calc member with formula. Due to this Dynamic calc account, the partition doesn't work (data are not replicated).
How could I do?
Thanks
Fanny

You're right, dynamic calc account are not issues. I am using them in partition.
But py issue is there :
The source dimension is like this :
TAX (Dynamic Calc)
- 6xxxxxxx
- 6yyyyyyy
- 6zzzzzzz (Dynamic Calc) = formula
The target dimension is like this :
TAX
And so I need to send TAX (Source) to TAX (cible).
I don't think it is possible, but I would like a confirmation before using something else.
I hope it is clearer now.
thanks
Fanny

Unable to use Dynamic Calc members on webform Column.

Hi All,
I am getting an error 'invalid webform' if i keep a dynamic calc member in webform column. For example if i keep scenario "Variance", a dynamic calc member with a formula "Actual -Budget" on webform column, the form is giving me the error.
What could be the issue. I am using 11.1.2.1. It is working fine in our old version 9.3.1.
Many Thanks

Have you checked the essbase application log as it may be generating an error, could need the cache increasing.
Cheers
John
http://john-goodwin.blogspot.com/

Retrive time with Dynamic Calc

Hi Experts,
My users run a large smart view report which works well
However, when they change one of the member on the query to DC member (dense)
Then the retrieve takes forever and they getting network error from smart view.
I try to figure out , how can I improve the retrieve time on my BSO app, focusing on DC issues
I try to increase the data cache, index cache, retrieval buffer and sort.
I add command of DYNCALCCACHEMAXSIZE and the retrieve doesn’t getting better.
In addition, can you pls help me understand the app log file,
Here’s what happen after I ran the report, maybe it will lead
To the problem:
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1200481)
Formula for member [YTD USD Display] will be executed in [TOPDOWN and CELL] mode
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1012710)
Essbase needs to retrieve [1] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1012736)
The Dyn.Calc.Cache for database [Main] can hold a maximum of [242] blocks.
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1012737)
The Dyn.Calc.Cache for database [Main], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1019018)
Writing Parameters For Database [Main]
[Mon Aug 06 02:41:03 2012]Local/Orac///1768/Info(1019017)
Reading Parameters For Database [Main]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1070013)
Index cache size ==> [307200000] bytes, [37500] index pages.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1070014)
Index page size ==> [8192] bytes.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1070081)
Using buffered I/O for the index and data files.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1070083)
Using waited I/O for the index and data files.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1019019)
Reading Data File Free Space Information For Database [Main]...
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1006025)
Data cache size ==> [512000000] bytes, [9359] data pages
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1006026)
Data file cache size ==> [0] bytes, [0] data file pages
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1080053)
Free space recovery skipped. Estimated free space recoverable by RecoverDbFreeSpace: [11068706640] bytes
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1024033)
Missing Database Config File [E:\Hyperion\AnalyticServices\APP\Orac\Main\Main.cfg], Query logging disabled
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1203135)
Starting the Data Mining Framework
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1203136)
Data Mining Framework successfully initialized.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1200551)
Allocated TRIGMAXMEMSIZE: [4096] Bytes.
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [Get Database Volumes]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [Set Database State]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1019018)
Writing Parameters For Database [Main]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1019018)
Writing Parameters For Database [Main]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [Get Database State]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [Get Database Info]
[Mon Aug 06 02:41:05 2012]Local/Orac///1768/Info(1013205)
Received Command [SetApplicationState]
[Mon Aug 06 02:41:06 2012]Local/Orac///1768/Info(1019010)
Writing Application Definition For [Orac]
[Mon Aug 06 02:41:06 2012]Local/Orac///1768/Info(1019011)
Writing Database Definition For [Main]
[Mon Aug 06 02:41:06 2012]Local/Orac///1768/Info(1019022)
Writing Database Mapping For [Orac]
[Mon Aug 06 02:41:06 2012]Local/Orac///5132/Info(1013210)
User [essadmin] set active on database [Main]
Pls help me find out how can I overcome this.
Many thanks,

I'll add on to Dan's comment that you very much need to test the dynamic calc (if indeed that is the problem) in the proper context.
Amusing but painful story:
I was once tasked with reducing calc time on a BSO database. i saw long ugly stored member calcs. Hah! I cleverly converted them to dynamic and calc times dropped. No one told me (and I didn't ask) how they were to be reported. There were thousands of instances of this member on the Excel sheet. What had been a nice fast retrieve dropped to five minutes. Whoops.
Take your pain wherever you like -- if you are reading multiple blocks to do the calc (my guess) nothing on earth is going to make it fast. Why make it dynamic in the first place? How many times is the member retrieved? Is it all in the block or, as i guessed, across multiple blocks?
Last comment -- again (this is getting boring) I agree with Dan -- caches are not, usually, the source of any performance joy and it always comes down to design.
Regards,
Cameron Lackpour

Input data into dynamic calc in Planning forms

Hi guys,
Have someone tried to combine these two requirements:
1. to have upper level members dynamic calc
2. to give users the ability to input data into those upper level members through Planning forms.
I need to do that in order to pass inputted values into HBR, and allocate those values to the leaf level across multiple dimensions. I need those members dynamic calc because otherwise I would need to aggregate data across 7 dimensions and that takes too long. Those allocations are suposed to happen constantly and are the main purpose of application.
I know you can have dummy stored members that correspond the uper level dynamic members, but then the user will have input forms without current data and will be required to check reports/forms with dynamic calc members prior to updating data.
I wonder if it is a realistic task to change jsp files that generate those forms, so that data can be inputed into the form, but instead of passing it to Essbase cube to send it to relational database.
P.S.
This is related to the thread I opened about optimizing recalculation time:
Recalculatiion takes much longer than initial calculation
I received a lot of valuable advices that would definitely work in other situations, but in my case they seem to contradict either user concurrent access or performance requirements.
Thanks a lot!
Dmitry

Hi Glenn,
I think i found a workaround for this, or may be i am missing something. I will replicate my hierarchies so that one hierarchy will have uper level stored members, and another dynamic calc. Once user loads the form it will run on-load script that will copy data from corresponding dynamic calc to stored slice. The updated data will be alocated to the leaf level, but will never be aggregated. Since reporting is done from ASO cube i only care about the leaf level and current selection in the form.
Thanks!

Data not rolling up of a dynamic calc member for a particular entity

Hi,
In my planning application data is not rolling up of a dynamic calc member for a particular entity whereas it is working fine for other entity.
Please find below the sample Smartview Retrieve
----------------Member_ALL---Member_None---Member Top---Member_ALL---Member_None---Member Top
----------------Entity 1----------Entity 1------------Entity 1----------Entity 2----------Entity 2------------Entity 2
Acc1------------100----------------#--------------------#---------------122---------------#-------------------122
NOTE: # denotes missing
Member_ALL and Member_None are children of Member_Top. Both Member_ALL and Member_Top are Dynamic Calc whereas Member_None is Store.
As shown above data is rolling upto Member Top for entity 2 while it is not getting rolled up for Entity 1.
Request you to please help in finding the error.
Thanks in Advance'
Joseph

Hi Joseph,
Is Acct 1 Dynamic Calc? In that case will it NOT calculate the combination MemberTop->Entity1 as Member_ALL->Entity1 + Member_None->Entity1.
I beleive it'll calculate the Acct1 member again for Member Top based on the dynamic formula (whatever the logic). If you make it Acct1 Stored, then the aggregation will be correct by first calculating and storing the Acct1 member and then AGG the Member dimension.
Cheers,
Abhishek

Dynamic Calc Issue - CalcLockBlock or Data Cache Setting

We recently started seeing an issue with a Dynamic scenario member in our UAT and DEV environments. When we tried to reference the scenario member in Financial Reports, we get the following error:
Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.com.hyperion.planning.HspException
In SmartView, if I try to reference that scenario member, I get the following:
The dynamic calc processor cannot allocare more than [10] blocks from the heap. Either the CalcLockBlock setting is too low or the data cahce size setting is too low.
The Dynamic calcs worked fine in both environments up until recently, and no changes were made to Essbase, so I am not sure why them stopped working.
I tried to set the CalcLockBlock settings in the Essbase.cfg file, and increases the data cache size. When I increases the CalcLockBlock settings, I would get the same error.
When I increased the data cache size, it would just sit there and load and load in Financial Reporting and wouldn't show the report. In SmartView, it would give me an error that it had timed out and to try to increase the NetRetry and NetDelay values.

Thanks for the responses guys.
NN:
I tried to double the Index Cache Setting and the Data Cache setting, but it appears when I do that, it crashes my Essbase app. I also tried adding the DYNCALCCACHEMAXSIZE and QRYGOVEXECTIME to essbase.cfg (without the Cache settings since it is crashing), and still no luck.
John:
I had already had those values set on my client machine, I tried to set them on the server as well, but no luck.
The exact error message I get after increasing the Cache settings is"Essbase Error (1042017) Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the olap.server.netConnectTry and/or olap.server.netDealy values in teh essbase. proprieties. Restart the server and try again"
From the app's essbase log:
[Wed Jun 06 10:07:44 2012]Local/PropBud/Staffing/admin@Native Directory/4340/Error(1023040)
msg from remote site [[Wed Jun 06 10:07:44 2012]CCM6000SR-HUESS/PropBud/NOIStmt/admin/Error(1042017) Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.]
[Wed Jun 06 10:07:44 2012]Local/PropBud/Staffing/admin@Native Directory/4340/Error(1200467)
Error executing formula for [Resident Days for CCPRD NOI]: status code [1042017] in function [@_XREF]
[Wed Jun 06 10:07:44 2012]Local/PropBud/Staffing/admin@Native Directory/4340/Warning(1080014)
Transaction [ 0x10013( 0x4fcf63b8.0xcaa30 ) ] aborted due to status [1042017].
[Wed Jun 06 10:07:44 2012]Local/PropBud/NOIStmt/admin@Native Directory/4340/Info(1013091)
Received Command [Process local xref/xwrite request] from user [admin@Native Directory]
[Wed Jun 06 10:07:44 2012]Local/PropBud/NOIStmt/admin@Native Directory/4340/Info(1008108)
Essbase Internal Logic Error [1060]
[Wed Jun 06 10:07:44 2012]Local/PropBud/NOIStmt/admin@Native Directory/4340/Info(1008106)
Exception error log [E:\Oracle\Middleware\user_projects\epmsystem2\diagnostics\logs\essbase\essbase_0\app\PropBud\NOIStmt\log00014.xcp] is being created...
[Wed Jun 06 10:07:46 2012]Local/PropBud/NOIStmt/admin@Native Directory/4340/Info(1008107)
Exception error log completed E:\Oracle\Middleware\user_projects\epmsystem2\diagnostics\logs\essbase\essbase_0\app\PropBud\NOIStmt\log00014.xcp please contact technical support and provide them with this file
[Wed Jun 06 10:07:46 2012]Local/PropBud///4340/Info(1002089)
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING

Dynamic Calc result different on each retrieval

We're currently testing version 6.5.6 on an NT server. We have two formulas set to Dynamic Calc. On the first retrieval, the formulas seem to retrieve fine. After several retrievals (maybe 20) they stop working. After this, each retrieval will give a different result. It seems to cycle through a few different incorrect answers before it starts over. If I modify the outline, restart services or reboot the box, it fixes the formulas for a while. However, after several retrievals, it reverts to its bad behavior.These formulas work consistently in 6.1p3a.We have already tried adding CALCFGDEPOPT FALSE to the Essbase config file to turn off event 28. It did not solve the problem.

Check your application log to see if the dynamic calc is dependent upon another dynamic calc member. If so you may need to make these members that calc incorrectly "Twopass" such that the first calculation is completed then the twopass calc is performed. You might also check the app log to make sure the dynamic calc members are not trying to perform the calcs off of members that have not been calculated yet. (i.e: they are below the cyn cal mbrs in the outline).

How to add dynamic calc storage property in planning?

hii am having problem in adding dynamic storage property inplanning application.i am using HAL to load members (metadata) into planningapplication i have all non level o members as dynamic calc. when irun HAL 3/4th of records are rejected.can anyone tell how to add dynamic calc property to mymembers. thanks and regards,Balu

Hi Ritu,
It's not difficult once you know how.
1) Go to: System Administration -> System Configuration -> Knowledge Management -> Content Management -> User Interface -> Search -> Search Option Set
2) Edit UISearch
3) Select your custom property from the list beside the option 'Allowed Predefined Properties' and hit save.
On 'Advanced Search' your property should now be listed under 'Filter by Predefined Properties'.
You may also add it to 'Allowed Sort Properties' if you like.
I hope this helps,
Patrick.

Dynamic Calc Member with Formula to Calculate a Rolling 13 Year

I have to create a rollup in my time dimension that will have 13 members representing each month of a 13 rolling forecast. I am having trouble setting this up as dynamic calc members with a formula assigned to it. For example, on of the members has the following formula.
As you can see, I am referencing several substitution variables since I want to make this as most dynamic as possible without having to make any changes to the formula member. Only making changes to the substitution variable. Any help would be much appreciated.
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jan"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Feb"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Mar"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Apr"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "May"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jun"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jul"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Aug"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Sep"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Oct"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Nov"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Dec"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF

We use similar logic but its in a calc script, not a dynamic formula.
Here's an example of what we do:
FIX (&Year, &Scenario)
IF (@ISMBR("JAN"))
"Average Usage%" = @AVG(SKIPBOTH, @MDSHIFT("Usage %"->"DEC"->&actYear, -1, "Year",), "Util %"->"JAN"->&actYear);
ELSEIF
ENDFIX
Another example in a different database:
IF (@ISMBR("JAN")) ((@MDSHIFT("Fees"->APR,-1,YEARS,)+@MDSHIFT("Fees"->MAY,-1,YEARS,)+@MDSHIFT("Fees"->JUN,-1,YEARS,)+@MDSHIFT("Fees"->JUL,-1,YEARS,)+@MDSHIFT("Fees"->AUG,-1,YEARS,)+@MDSHIFT("Fees"->SEP,-1,YEARS,)+@MDSHIFT("Fees"->OCT,-1,YEARS,)+@MDSHIFT("Fees"->NOV,-1,YEARS,)+@MDSHIFT("Fees"->DEC,-1,YEARS,)+"Fees"->JAN)/10)*12;

Dynamic Calc in Multicurrency Application

Similar Messages

Maybe you are looking for