Dynamic change of fields in Module Pool program?

Dear Friends,
I defined a check list with values ABC and 123.
If I select ABC, there are 4 fields will be displayed these all are char fields.
If I select 123, there are 4 fields are replacing the above mentioned 4 fields at runtime. In that, one Date field is there, but it is replacing with char value.
How can I change dynamically from char to date vise versa at runtime?
PLease help me out.
thank you
sekahr

FM for converting char to numc : CHAR_NUMC_CONVERSION
for numc to char CALL FUNCTION 'MOVE_CHAR_TO_NUM'

Similar Messages

How to delete the row in table control with respect to one field in module pool programming?

Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MS

HI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
     WHEN 'DELETE'.
        LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
            APPEND LS_SOURCE TO LT_RESTORE.
            DELETE TABLE LT_SOURCE FROM LS_SOURCE.
            SOURCE-LINES = SOURCE-LINES - 1.
        ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field.

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

F1 help on a field in module pool programming

I want to create f1 help on a field in module pool programming. How to use POH event. where should i write the help documentation. Before using this f1 help on a field i have to set some properties on GUI interface Editor. Please clearly mention the steps i have to follow.

PROCESS ON HELP-REQUEST.
FIELD P_LFA1 MODULE HELP_F1_LIFNR.
MODULE HELP_F1_LIFNR INPUT.
PERFORM SHOW_HELP_F1 USING 'ZFAG_DOC1'.
ENDMODULE. " help_f1_lifnr INPUT
FORM SHOW_HELP_F1 USING P_OBJECT.
Dati testo help
DATA: T_LINE LIKE TLINE OCCURS 0,
XHEAD LIKE THEAD,
HELP_INFO LIKE HELP_INFO,
TEXC LIKE SY-UCOMM OCCURS 0,
V_OBJECT LIKE DOKHL-OBJECT.
Costante
DATA: PREF_SIMG(4) VALUE 'SIMG',
DOCID_HY LIKE DOKHL-ID VALUE 'HY'.
Testo
CONCATENATE PREF_SIMG P_OBJECT INTO V_OBJECT.
Estrazione testo
CALL FUNCTION 'DOCU_GET_FOR_F1HELP'
EXPORTING
ID = DOCID_HY
LANGU = SY-LANGU
OBJECT = V_OBJECT
IMPORTING
HEAD = XHEAD
TABLES
LINE = T_LINE
EXCEPTIONS
RET_CODE = 1
OTHERS = 2.
CASE SY-SUBRC .
WHEN 0.
Visualizzazione testo
GET CURSOR FIELD HELP_INFO-DYNPROFLD.
HELP_INFO-DOCUID = DOCID_HY.
HELP_INFO-DOCUOBJECT = V_OBJECT.
HELP_INFO-SPRAS = SY-LANGU.
HELP_INFO-PROGRAM = SY-REPID.
HELP_INFO-DYNPRO = SY-DYNNR.
HELP_INFO-DYNPPROG = SY-REPID.
HELP_INFO-PFKEY = SY-PFKEY.
HELP_INFO-FIELDNAME = HELP_INFO-DYNPROFLD.
CALL FUNCTION 'HELP_DOCULINES_SHOW'
EXPORTING
HELP_INFOS = HELP_INFO
OVERLAY_HEADER = XHEAD
TABLES
EXCLUDEFUN = TEXC
HELPLINES = T_LINE.
WHEN OTHERS. MESSAGE S720(SH).
ENDCASE.
ENDFORM. " SHOW_HELP_F1

I want to go back from mandatory field in module pool program

Hi
i am doing tab strip control in module pool program.i want to go back from the selection field, which is a mandatory, to the main program by pressing f3.but i am nt able to get the output.can anybody pls help me.
Amayika

Hi
1. For your BACK or CANCEL button on menu bar, give Button
Ftype "E".
2. In PAI : Write below Modules.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
MODULE BACK AT EXIT-COMMAND.
double click on it.Inside of modules write below code.
MODULE CANCEL INPUT.
IF OK_CODE = 'CANCEL'.
CLEAR OK_CODE.
LEAVE PROGRAM.
ENDIF.
ENDMODULE.
MODULE BACK INPUT.
IF OK_CODE = 'BACK'.
CLEAR: OK_CODE, INPUT1, INPUT2.
LEAVE TO SCREEN 100.
ENDIF.
ENDMODULE.

Search Help For a Field in Module Pool Programming

Hi,
I have a field called status in Module Pool for which i need to write a search help.
This is the piece of code i have written.
TYPES: BEGIN OF ty_status,
 stat type i,
 status type string,
 END OF ty_status.
DATA: lt_emp_status TYPE STANDARD TABLE OF ty_status,
 lw_emp_status TYPE ty_status.
REFRESH lt_emp_status.
lw_emp_status-stat = '1'.
lw_emp_status-status = 'Draft'.
APPEND lw_emp_status TO lt_emp_status.
CLEAR lw_emp_status.
lw_emp_status-stat = '2'.
lw_emp_status-status = 'Employee Review'.
APPEND lw_emp_status TO lt_emp_status.
CLEAR lw_emp_status.
REFRESH lt_emp_status.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'STATUS'
 value_org = 'S'
 TABLES
 value_tab = lt_emp_status
 return_tab = t_return
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc = 0.
 READ TABLE t_return INDEX 1.
 MOVE t_return-fieldval TO LV_EMP_status.
ENDIF.
But i am getting the following error.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_ASSIGN_CAST_ILLEGAL_CAST', was
not caught in
procedure "F4IF_INT_TABLE_VALUE_REQUEST" "(FUNCTION)", nor was it propagated by
a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The error occurred at a statement of the form
 ASSIGN f TO <fs> CASTING.
 ASSIGN f TO <fs> CASTING TYPE t.
or
 ASSIGN f TO <fs> CASTING LIKE f1.
or
 at table statements with the addition
 ASSIGNING <fs> CASTING.
The following error causes are possible:
1. The type of field f or the target type determined by <fs>, t or f1
contains data references, object references, strings or internal tables
as components.
Could some one help me how to resolve this issue.
Thanks in advance.

Hi,
Please see this sample code below:
*To fetch the classification data on the sel screen
DATA: BEGIN OF IT_KLAH OCCURS 0,
 CLINT TYPE CLINT,
 CLASS TYPE KLASSE_D,
 END OF IT_KLAH.
SELECT CLINT CLASS FROM KLAH UP TO 500 ROWS
INTO TABLE IT_KLAH.
IF SY-SUBRC <> 0 .
 MESSAGE TEXT-006 TYPE 'E'.
ELSE.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
DDIC_STRUCTURE = ' '
 RETFIELD = 'CLASS'
PVALKEY = ' '
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'p_s_clascn_low' "i had to put the f4 help on the selection screen's select option low value,
 "here basically you have to give the internal table name inside quotes in which
 "you want to retrieve your data
 VALUE_ORG = 'S'
 DISPLAY = ' '
 TABLES
 VALUE_TAB = IT_KLAH.
ENDIF.
Hope it helps,
Regards,
Mansi

F4 help for the Date field in Module-Pool program

Hi,
I have a requirement wherein the user shud be allowed to choose a date on the calendar using F4 help and after choosing, it shud get displayed as dd.mm.yyyy format in the field. Is there any functional module to implement this.
Thanks in Advance,
Saranya.

Hi,
Please try the below code in your prgm.
You have to write the below code in the POV of the required field.
***INCLUDE MZDATE_POV_DATEI01 .
*&      Module pov_date INPUT
      text
module pov_date input.
DATA: li_ret_tab LIKE ddshretval OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = ' '
fieldname = ' '
searchhelp = 'BU_DATE_CHAR'
TABLES
return_tab = li_ret_tab
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc IS INITIAL.
READ TABLE li_ret_tab INDEX 1.
IF sy-subrc IS INITIAL.
wrk_date = li_ret_tab-fieldval. "The required field
ENDIF.
ENDIF.
endmodule.                 " pov_date INPUT
Hope it suits ur requirement.
Reward points if useful.
Thanks and regards,
Litta.

How to assign FCT code to a field in module pool programming?

Hi All,
I have two fields on the screen. One is I/O field other is text field.
suppose i enter country code in I/O field i should get the name of country in text field. I want to assign fct code to I/O field.
But in attribute popup it's not allowing to assign fct to the field.
Please Help.
Regards,
Mohammed Quddus.

Hi, as far as I know R/3 screen I/O fields does not have onkeyup event. So you can not achieve this without hitting enter. When you have to hit enter then no need for function code. You can not assign FCT for I/O fields. You can write required logic in your PAI after entering country code.
Thanks,
Siva

How to make the field as mandatory in module pool program.

Hi Experts,
Could you please advice me in making a screen field as mandatory input field in module pool programming.
Thanks in advance.

Or you could add a check in a PAI module to check if there is some value, if not give error message.
module check_value.
if lv_value is initial.
message e001(00) with 'Enter a value'.
endif.
endmodule
In the PAI screen flow logic...
Process after input.
field lv_value module check_value.
Regards,
Rich Heilman

How to write module pool program

hai,
what is the module -pool program ?
what are the procedures to write the module-pool program.
plz give the simple program for module-pool programs?
regards
surender

Hi
This component though is not attached to the screen painter, plays important role in transaction. Normally, for reports, on line executable programs are written but for transaction, Module Pool Programs are written. The module pool program contains only modules to handle various events associated with screen and data declaration statements.
System divides the module pool program into several include program. These are global field, PBO modules, and PAI modules. It is entirely users decision whether to use these modules or write directly into main program.
Creation of Module Pool Program
You can create module pool program either through
Object browser
System automatically creates the module pool program and for these program which are created through object browser, system creates the include modules.
Or
ABAP/4 editor
It is similar to normal program creation. Type of program should be given M and is not created by system.
Communication between Dynpro and Module Program
For each screen, the system executes the flow logic, which contains corresponding events. The control is passed to Module Pool Program. Module Pool Program handles the code for these events and again passes back control to the flow logic and finally to screen. Unlike on line program, in this case, the control remains with flow logic. The switching of control between flow logic and module pool program and back is common process when user executes transaction.
Creation of a Complete Transaction
Steps involved to create a complete transaction
 Create module pool program.
 From screen painter create screens.
 Write flow logic for each screen.
 Write code for all the events in module pool program.
 Check for any error in screen and flow logic.
 Generate each and every component of screen i.e. flow logic and screen.
 Single screen can be tested using Screen Painter.
 Create transaction code through object browser.
 Generate the transaction code.
 User can execute the transaction by entering the transaction code in the command field.
Handling Function Code
The function code or OKCODE is the last field of Field list. Function code can be handled as follows:
During the Designing of the screen, a function code is assigned to pushbutton.
 In field list, developer needs to specify OKCODE as last field.
 In module program it is a global field and can be evaluated in the PAI event.
 A function code is treated in the same way, regardless it comes from pushbutton, menu item or any other GUI element.
When the user clicks on the Display button, you want to display details of sflight, with corresponding carrid and connid (which is entered by the user).
Module pool program to handle this particular screen is as follows:
Program YVTEST7.
TABLES: SFLIGHT.
DATA: OKCODE (4).
MODULE INPUT1 INPUT,
CASE OKCODE.
 WHEN DISP.
 SELECT * FROM SFLIGHT
 WHERE CARRID = SFLIGHT CARRID AND
 CONNID = SFLIGHT CONNID.
 ENDSELECT.
 LEAVE TO SCREEN 200.
 WHEN EXIT. LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. INPUT1 INPUT
MODULE USER_COMMAND_0200 INPUT.
CASE OKCODE.
WHEN BACK. LEAVE TO SCREEN 100.
ENDCASE.
ENDMODULE. USER_COMMAND_0200 INPUT
When the user clicks on display, control is transferred to screen no. 200 on which you display sflight details & on the same screen, when user clicks on BACK button, he comes back to main screen.
Flow logic for screen 100 is as follows:
PROCESS AFTER INPUT.
MODULE INPUT.
Flow logic for screen 200
PROCESS AFTER INPUT.
USER_COMMAND_0200.
MODULES: Modules are handled in module pool program.
You need to write flow logic for screen 200 and design screen 200.
In case of transaction transfer of data from program to screen is automatic i.e. you need not transfer the data from program to screen explicitly. The fields, which you define in the screen receives the data from program and displays the same.
The Field Checks
As already mentioned Transaction is the only method, which SAP recommends to update the database tables. Data entered in the database table should be valid and correct. Data entered is validated at each and every point. ABAP/4 offers various methods to validate data and those are as follows:
 Automatic field checks
 Checks performed in the flow logic
 Checks performed in the ABAP/4 module pool program
Automatic Field Checks
These checks are based on the field information stored in the dictionary. These checks are performed by the system automatically when the user enters the data for the screen field. System performs these checks before PAI event is triggered. Types of field checks performed by system are as follows:
 Required input
While designing the screen, for particular screen field if you click the Req. Entry checkbox, the field becomes mandatory. When the transaction is executed if user leaves this particular field blank, the system displays error message. User cannot proceed until the user enters some data.
 Proper Data Format
Each field has its own data format whether it is table field or screen field. Whenever data is entered, system checks for the proper format of the data. For example date. Each user has its own format for date, which is defined in the user master record. If the date defined in the user master record is in the format DD/MM/YYYY, if the user enters the date, say, in YY/DD/MM, the user displays the error message. System also checks for the value of month or days. For example if month entered is greater than twelve then the error message is displayed.
 Valid Value for the Field
In data dictionary two tables are related by Primary key-Foreign key relationship. Whenever the user enters the data, the system checks for the check table values. Also in Domain, if you have fixed values, then the system checks for these values.
Automatic field checks are repeated each time the user enters the data.
About at Exit Command
Automatic field checks can be avoided by AT EXIT-COMMAND, which works exactly the same way as Cancel works on application tools bar. In the R/3 screen, if you want to quit the processing of that particular screen without entering the mandatory fields, user can click the Cancel button. Same functionality can be incorporated in the user-defined transaction by using AT EXIT-COMMAND. This module can be called before the system executes the automatic field checks and it goes without saying that before PAI event. Code for AT EXIT-COMMAND in flow logic and in module pool program can be written as follows:
In Flow Logic
Process After Input.
Module exit AT EXIT-COMMAND.
 In module pool program.
Module exit.
Case okcode.
When Exit.
Leave to screen 0.
To achieve this kind of functionality a pushbutton or menu item should be assigned a function type E. It tells the system to process this particular module before carrying out any field checks.
Flow Logic Validations
Consider the case where you want user to enter only LH and SQ for sflight-carrid. In this case, you are restricting value of a screen field. This cannot be achieved by automatic field check. Hence there is a need of additional validation. It can be done in flow logic by using following statement:
Field -
Values
Syntax
PAI.
Field sflight-carrid values (LH).
For multiple values
PAI.
Field sflight-carrid values (LH SQ).
Field sflight-price values (between 1000 and 2000).
In this case when the user enters the value, PAI is triggered and field is checked for that particular value. If the value entered happens to be wrong, that field is enabled for user to enter. If you have multiple Field statements in your flow logic, it is sequential execution.
Consider the following case:
PAI.
Module assign.
Field sflight-carrid values (LH SQ).
In ABAP/4
Module assign.
Data: carrid1 like sflight-carrid.
Carrid1 = sflight-carrid.
Endmodule.
In this case, Sflight-carrid is used in the flow logic before the field statement. The system will give invalid value or some previous value as the field sflight-carrid is used in module before it is checked i.e., field statement is after the module in which sflight-carrid is being used. The field is not available to the system unless it executes the field statement. Field statement transfers the values to the program and is done only once. If you dont have Field statement in your flow logic, transfer of values takes place in PAI event.
Consider one more case where you have multiple field statement
PAI.
Field Sflight-carrid values (LH).
Field Sflight-connid values (0400 0500).
In this case if the user enters only carrid wrong, then this particular field is enabled and rest of the fields are disabled for user to input. Many times if the user enters wrong value for one field, then you might want to give option to user to enter all the fields, which is not possible by using Field statement only. This functionality can be achieved by CHAIN ENDCHAIN.
Syntax
Chain.
Field sflight-carrid value (LH).
 Field sflight-connid values (between 200 and 500).
Endchain.
Field sflight-price values (100 1000).
In this case, if the user enters wrong value only for carrid, both the fields i.e. carrid and connid are enabled as they are grouped together in the Chain statement. The field price will be disabled for input. Usually, logically related fields are grouped together with Chain-Endchain statement.
Module Pool Program Validations
Checking fields ABAP/4 program includes
 Field statement in flow logic.
 Module statement in ABAP/4 module pool Program.
Syntax
PAI.
Field sflight-carrid module <name>.
This module can be handled in the main program i.e. module pool program.
In ABAP/4 program
Module Check.
Select single * from sflight where carrid = sflight-carrid.
If sy-subrc ne 0.
 Message e001.
Endif.
In this case, field sflight-carrid is checked in the table for its existence.
Dynamically Calling the Screens
About Displaying Next Screen
Transaction is a sequence of screens, which are displayed one after the other. The next screen displayed depends upon the attributes of first screen. In attributes you need to give Next Screen number i.e. if next screen displayed should be 200 screen, then this number should be given in next Screen attributes. These are static attributes of the screen. By default, if nothing is specified in the program, the system branches out to the screen number, which is specified in the attribute screen.
In this case, if user selects MARA pushbutton, then fields from Mara table are displayed. When the user clicks on the MARD, then the fields from MARD table are displayed. Depending upon users selection, the screen is branched out and this has to be done during runtime. This functionality can be achieved by dynamically calling the screen in module pool program.
The screen can branch out to new screen depending upon user selection. Following command in module pool program can do this:
 SET SCREEM
 CALL SCREEN
 LEAVE TO SCREEN <NUMBER>
All these commands override the specifications given in the attributes. This overriding is temporary. The values stored in the attribute are not changed.
Set Screen
Syntax
Set screen <number>.
In module pool program
Case okcode.
 When DISP.
 Set screen 200.
 When LIST.
 Set screen 300.
Endcase.
In this case, the entire processing of current screen takes place and then the system branches out to next screen. If you want to branch out to the next screen without processing the current screen, LEAVE SCREEN should be used along with the SET SCREEN.
For Example:
Case okcode..
 When DISP.
 Set screen 200.
 Leave Screen.
 When LIST.
 Set screen 300.
 Leave Screen.
Endcase.
When SET SCREEN is used, control cannot be transferred to the main screen or previous screen, unless you write code for the same.
Call Screen
Usually used for pop up screens. Many times, there is a need for user to enter additional information or secondary information on another screen or pop up screen. Once the user enters the data, he should be able to go back to main screen or to the screen where he started. This is not possible by using SET SCREEN. CALL SCREEN achieves this functionality.
Syntax
Call Screen 200.
Will simply call a screen number 200 from a main screen. Once the screen is displayed the user can enter all the data and return to the main screen by clicking BACK button.
To call screen as pop up screen the syntax is
Call screen starting at <col.no.> <line no>
 Ending at <col no> <line no>.
In this case window will be popped as window and user can close it by using BACK button.
Leave to screen
To SET a new screen without processing current screen, you need to use the following two statements together:
SET SCREEN 200.
LEAVE SCREEN.
Or a Single statement
LEAVE TO SCREEN 200.

How to deactivate the screen fields dynamically in Module Pool Program?

Hi guys,
 How to activate & deactivate the screen fields of a module pool program
dynamically through program. Like Change mode and display mode in a single
screen.

Hi,
Make use of a Variable,say gv_flag, for both Activate and Deactivate functionalities. As many times you hit the same button, change this variable value. For example, let us say first time you hit this button, assign value 'X' to this variable. Second time you hit this button, assign value ' ' to this variable. In PBO based the variable value you have to Activate and Deactivate.
PBO.
if gv_flag = 'X'. " Activate
 loop at screen.
 if screen-fname = 'ITAB1-MATNR'.
 screen-input = '1'.
 modify screen.
 endif.
 endloop.
elseif gv_flag = ' '. " Deactivate
 if screen-fname = 'ITAB1-MATNR'.
 screen-input = '0'.
 modify screen.
 endif.
 endloop.
endif.
PAI.
case sy-ucomm.
 when 'ACDC'. " Activate/Deactivate
 if gv_flag = 'X'.
 gv_flag = ' '.
 else.
 gv_flag = 'X'.
 endif.
endcase.
thanks,
sksingh

Want to change the text of a coloumn dynamically in module pool program

Hi to all experts,
I need to change the text in a table control( of a column)of a module pool program dynamically ....depending on the company cod e.

Hi,
In program depends on the condition you can access the table_control-cols-name and modify it accordingly.
Eg:
CONTROLS TABLE_CONTROL TYPE TABLEVIEW USING SCREEN 100.
you can access the control like:
TABLE_CONTROL-COLS[1]-SCREEN-NAME
and modify the same dynamicaly
cheers
shibu

Calling search helps dynamically in module pool program

Hi Experts,
I have created two search helps. I need to call these search helps in my module pool program dynamically for a single field (i.e ZMATNR).
you might be known... if it is a single search help, we can assign that in field attributes.
But here... I need to call different search helps for a single field based on the condition.
Pls help me.
Thanks
Raghu

Hi,
Use the below function module and pass the search help created in search help field according to the condition.
Process on Value-request.
if condition = A.
call function " F4IF_FIELD_VALUE_REQUEST"
TABNAME           =
FIELDNAME        =
SEARCHHELP     = "Mention search help created
Elseif Conditon =B.
call function " F4IF_FIELD_VALUE_REQUEST"
TABNAME           =
FIELDNAME        =
SEARCHHELP     = "Mention search help created
Endif.
Regards,
Prabhudas

How to validate the field values in module pool program?

Hi Guys
 I am working with module pool programming.
 Here I want to validate the fields like below.
 with out filling all the fields if I click SAVE option it has to show a message that all fields has to be filled. This can be done by checking all the fields individually.
 I think it can be done through LOOP AT SCREEN ......ENDLOOP. sequence.
 If it is possible, can anyone help me?

You need to write the Module in between the CHAIN and ENDCHAIN statment in SE51
If you send a warning or error message from a module <mod> that you called using a FIELD statement as follows:
CHAIN.
FIELD: <f1>, <f 2>,...
MODULE <mod1>.
FIELD: <g1>, <g 2>,...
MODULE <mod2>.
ENDCHAIN.
all of the fields on the screen that belong to the processing chain (all of the fields listed in the field statements) are made ready for input again. Other fields are not ready for input. Whenever the MODULE statement appears within a processing chain, even if there is only one FIELD attached to it, all of the fields in the chain (not only the affected field) are made ready for input again, allowing the user to enter new values. If the fields in the processing chain are only checked once, the PAI processing continues directly after the FIELD statement, and the preceding modules are not called again.
Look at the DEMO program DEMO_DYNPRO_FIELD_CHAIN.
ashish

How to change the logon language in module pool program?

Hello All,
I had created a module pool program and had desiged a screen.
When i am logged in English language i am able to see them in english as per the requirement it is working fine.
But the requirement is wen i am logged in DE then the selection-screen texts should show in English and not in German.
Kindly give me a solution for this.
Thanks & Regards,
Rajesh Kumar

Hi Rajesh,
This problem is because you have maintained a standard dictionary fields on selection screen and all the standard dictionary fields are maintained in DE language, on the screen layout, go to the attributes of that particular text field, there is a option MODIFIZ for dictionary fields (it is a drop down), selection F TEXT, now whatever the text u will define, it will remain same for all the languages, once u do this then u again login in DE,l u will see the text maintained by u and not the DE text.
Do reply if problem still persist.
point if useful.
Rohit G
Edited by: Rohit Gaharwar on Aug 11, 2009 1:24 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:30 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:36 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:36 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:37 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:38 PM

Dynamic change of fields in Module Pool program?

Similar Messages

Maybe you are looking for