Dynamic changing the LOV

Hi
we are facing some problem in Dynamic Changing the LOV.
Lets assume the below scenario.
I have tables like location and department table.
In location table i have values like country name and location. For one country there will be multiple locations.
First i need to show the unique country names in LOV. based on the country selection i need to show locations.
all we need to achieve in same page meaning i have two lovs in one page. first one is country and second one is locations.
pls. help us to resolve this issue.

Why wouldn't you put two items (visible=no) on page; first of them with "select distinct..." of country on record group for LOV1 and the second with LOV2 with locations, depending of values in item1 where you took value from LOV1?

Similar Messages

Can you dynamically change an LOV on the parameter form based on other params?

Can you dynamically change an LOV on the parameter form based on other parameters? For example, based on a entered purchase order number, create an LOV of the purchase order lines that belong to the entered PO #.

Hi
Accouding to my knoledge you can't do it.
If you want to build lov for that particular
value, you can do it in Forms.
Vijay

Unable to change the LOV of To locator in Subinventory transfer form

I am trying to change the LOV of To Locator field in the Subinventory form.
I have made the trigger event as "When-new-form-instance"
In actions tab:
Built in : Create a record group from query and gave a name to the record group
Property: LOV - ENABLE_LIST_LAMP - Group_name - <gave the name of the record group>
But it gives an error : Cannot create the record group.
The name of the column in the form for To Locator is : TRANSFER_LOCATOR and its defined at the item level.
Can anyone please help?

During the implementation of a recent project, we suffered from the same issue. There seems to be no way to recolor that part of a pivot table, but you can remove it by disabling the row header... which, in your case, should also remove the header "Class".
The way I see it, the users would already know what that Class column is supposed to be about. So you don't actually need to have that header displayed, if you ask me.
If someone has a proper solution to this question though, I'd be interested :)
Cihan
Edit: Spelling
Edited by: cihanc on 14.Eki.2012 23:21

How to dynamically change the text of a TextObject with embedded DataField?

Hi
I'm trying to dynamically change the text of a TextObject at runtime, by using the .NET library. My problem is that if one or more DatabaseFieldDefinition is embedded inside my text, I'm unable to change the "static text" only, by keeping the field, e.g. I have :
Text1 => "Contact Name: {Contact.Name}"
and I'd like to change it to anything else like:
Text1 => "Nom du Contact: {Contact.Name}"
Half of my TextObject is static text while second part comes from the dataset.
(of course the translation is dynamic - it is called at run-time and the new value to be set depends on the calling application language)
If I simply modify the Text property of my TextObject, the {Contact.Name} embedded field is not evaluated anymore by the Crystal Engine, but considered as a single text.
Using formulas or parameters looks quite difficult, because it means having many ones just for translation needs - I cannot control the way my users will create their reports and "force them" to use complex methods just in order to put a text and a value together...
Anyone knows how to deal with that ?

Only way I can think of doing this:
1) Create a formula (call it lang) and enter the string "Contact Name" in it
2) Place the {Contact.Name} field next to the string
3) So now you have:
ContactName: {Contact.Name}
4) Check what localization you are after. If you need "Nom du Contact", change the lang formula so it shows "Nom du Contact" using the code below:
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Inherits System.Windows.Forms.Form
Dim Report As New CrystalReport1()
Dim FormulaFields As FormulaFieldDefinitions
Dim FormulaField As FormulaFieldDefinition
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
FormulaFields = Report.DataDefinition.FormulaFields
FormulaField = FormulaFields.Item(0)
FormulaField.Text = "[formula text]"
CrystalReportViewer1.ReportSource = Report
End Sub
I realize this may not give you consistent spacing as the translations may have strings of differnt length. Perhaps someone has other idea(s)...

Dynamically change the Binding of a view object

I want to reuse a panel several times in my application. The VO has one bind parameter (:1). The same panel should be reused several times with different bind variables.
I found a technical note concerning this issue called: How to Dynamically Change the binding of a View Object to a JClient Panel. This works for JDeveloper 9i but not for JDeveloper 19g. Does anybody know how to dynamically change the binding in JDeveloper 10g

You may use bindRowSetIterator() and pass in a custom fetched ViewObject or a RowSetIterator to the iterator binding that is displayed in your panel.

Dynamically change the Priority Group of Logical Table Sources in OBIEE 11g

Hi All,
I have 2 Logical Table Sources(LTS 1 and LTS 2 for a Logical Table in BMM Layer).
Example: Logical Table : Sample
LTS Source 1 : Sample 1(Priority Group Set to 1)
LTS Source 2 : Sample 2(Priority Group Set to 0)
I have set the Priority Group of Sample 1 LTS Source to 1 and Priority Group of Sample 2 LTS Source to 0.
I need to dynamically change the Priority Group of Sample 1 LTS Source to 0 if my role is DEVELOPER where role is a column in database.
If my role is not equal to DEVELOPER then the Priority Group of Sample 1 LTS Source will remain same(1).
Please suggest how can i achieve this.
Thanks,
Soukath Ali

hello Soukath Ali,
didi you find a way to dinamically changing Priority Group?
thanks,
Maria Teresa Marchetti

Dynamically changing the name of the .dll file to load in call Library

Our current model is to use dll files as "plug-in" modules for instruments and a top layer test step calls the appropriate driver dll.
For instance
the TestStep is called with the kenmore.dll passed as a parameter so the kenmore.dll file is loaded, the functions are registered and the functions are called. Next the TestStep is called with whirlpool.dll as a parameter now the whirlpool.dll is loaded the functions are registered and the functions are called. This works very well in our current CVI/LabWindows environment. Now we plan to work with LabView, we wish to retain this model (as DLL files, there are advantages in our model for us). We have not found a way to load these dll files from LabView without hard coding the path and filenames in.
Any suggestions on how to dynamically change the path in the Call Library module, or another suggested method of loading the dll via LabView?
Thanks,

John Stuart wrote:
Our current model is to
use dll files as "plug-in" modules for instruments and a top layer test
step calls the appropriate driver dll.
For instance
the TestStep is called with the kenmore.dll passed as
a parameter so the kenmore.dll file is loaded, the functions are
registered and the functions are called. Next the TestStep is
called with whirlpool.dll as a parameter now the whirlpool.dll is
loaded the functions are registered and the functions are called.
This works very well in our current CVI/LabWindows environment.
Now we plan to work with LabView, we wish to retain this model (as DLL
files, there are advantages in our model for us). We have not
found a way to load these dll files from LabView without hard coding
the path and filenames in.
Any suggestions on how to dynamically change the path in the Call
Library module, or another suggested method of loading the dll via
LabView?
Thanks,
As Ben has pointed out LabVIEW
scripting may be a possibility but you are going with that in highly
unsupported area. Also I happen to know that changing the library name
of a Call Library Node through scripting has produced unsupported
feature errors previous to LabVIEW 7.1 eventhough the method was there.
And LabVIEW 8 hides the whole scripting business behind the license
manager.
Another approach at least if the different DLLs do not change to often
thier functions and parameters would be to create a wrapper DLL. Have
it a method that loads the desired DLL and links its functions to
internal function pointers. Then when calling the actual function entry
points just redirect directly to the correct fucntion through that
function pointer. Since you are already working in CVI creating such a
DLL should be only a matter of taking out a little bit of your already
existing code and put it into a DLL project.
Rolf Kalbermatter
Message Edited by rolfk on 04-12-2006 07:40 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Dynamically changing the flatfile name..

Hi friends,
I 'm Getting data from 30 Flat files...all are with same structure but different data.. .. all these files are now in Application server...
now i want to upload data into with a single DataSource and to ODS with process chains..
so, how can i dynamically change the file name in Data Source level.. i saw previous threads.. in that.. through Routines.. we can solve this problem.. but I dont know ABAP code... so, can any one plz give me the exact code.. what i have to write...exact coding..
<b>
       I already post this question in forums.... but evry one gave different options.. some one gave the function module..
BAPI_IPACK_CHANGE    and BAPI_IPACK_START.
and some one gave other function module.. like .. EPS_GET_DIRECTORY_LISTING
i tryd for All these options.. but i'm not getting the exact solution... even i'm unable to pass the parameters also.. beacuse.. in that function what parameters can i pass....</b>
can u plz suggest me the solution..
Thanks
Babu

Hi Friends,
for the above requirement i had write the bellow coding in the routine.. it is working.. but the problem is.. it was loading only the last file..(30 th file data only..)
data : z1(50) type c,
         z2 type c,
         z3(50) type c,
         z4(50) type c.
         Z2 = 1.
   Do 5 times.
          z1 = 'C:\Documents and Settings\e10035\Desktop\'.
          z3 = '.csv'.
          concatenate z1 z2 z3 into z4.
          p_filename = z4.
          z2 = z2 + 1.
    Enddo.
SO, CAN YOU PLZ SUGGEST ME.. when ever the file name was changing in the loop.. that automatically should load into the PSA ..
plz... plz.... help regarding this..
Bbau

Dynamically changing the color of nodes in a JTree

I have created a JTree and want to dynamically change the color of some of the TreeNodes as my program runs. The JTree is displayed in a JPanel. There is an algorithm built into which identifies the nodes whose color I need to change. No user actions is performed (everythign is internal to the program).
It seems that in the TreeCellRender only kicks in when the tree is first displayed. How do I get it to re-render the tree when the TreeModel changes? It seems that the Listeners are only looking for external user interactions.
Any help would be greatly appreciated.
Thanks!

I think I was a bit too vague in my question. Let me try again...
I have changed an attribute in a node in a JTree. This attribute is changed after the tree was initially rendered, but while the program is still running. I want to tell the TreeCellRenderer to look again at this node since that attribute that was changed will effect how the node should be renderered. I tried using the nodeChanged() method, but it did not work (the colot of the node did not change). Any advise how I can do this?
Thanks!

Dynamic change the ALV layout

Alle experts:
In ALV layout report, how to dynamic change the layout int ABAP porgram?
e.g. I have save 5 layout, I need to change them base the my selection in ABAP program? How to do this?
Thanks in advance!

Try to call fieldcatlog dymnamically. Refer tofollowing code. Reward if helpful.
REPORT zfir0001 MESSAGE-ID ztax.
                           Tables
TABLES : glt0, t001, skat.
                      Internal Tables
DATA: BEGIN OF itab OCCURS 0,
        racct               LIKE   glt0-racct,    "Account number
        txt20               LIKE   skat-txt20,    "G/L account short text
        co_1000          LIKE     glt0-hslvt,     "Balance carried forward for company code 1000
        co_1100          LIKE     glt0-hslvt,     "Balance carried forward for company code 1100
        co_1200          LIKE     glt0-hslvt,     "Balance carried forward for company code 1200
DATA : BEGIN OF itab1 OCCURS 0,
         bukrs LIKE glt0-bukrs,
         waers LIKE t001-waers,
       END OF itab1.
DATA : BEGIN OF it_itab1 OCCURS 0.
        INCLUDE STRUCTURE glt0.
DATA : END OF it_itab1.
                      Data Declarations
DATA : w_total   LIKE glt0-hslvt,
       w_count   LIKE glt0-bukrs,
       w_flg     TYPE c,
       lv_count TYPE i.
      w_slash   TYPE c VALUE ' '.
                      Selection screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE tit1.
SELECT-OPTIONS : s_bukrs FOR glt0-bukrs OBLIGATORY,
                 s_racct FOR glt0-racct OBLIGATORY,
                 s_ryear FOR glt0-ryear OBLIGATORY,
                 s_rldnr FOR glt0-rldnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
tit1 = 'Please select:'(004).
TYPE-POOLS: slis.                                 "ALV Declarations
DATA: i_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
        gd_tab_group TYPE slis_t_sp_group_alv,
        gd_layout    TYPE slis_layout_alv,
        gd_repid     LIKE sy-repid.
********Geting the selected company code in table itab1****
START-OF-SELECTION.
IF NOT s_bukrs-high IS INITIAL.
    itab1-bukrs = s_bukrs-low.
    APPEND itab1.
    w_count = s_bukrs-low.
    DO.
      IF s_bukrs-high = w_count.
        EXIT.
      ELSE.
        w_count = w_count + 1.
      ENDIF.
      SELECT SINGLE * FROM t001
          WHERE bukrs = w_count.
      IF sy-subrc = 0.
        itab1-bukrs = w_count.
        APPEND itab1.
        CLEAR itab1.
      ENDIF.
    ENDDO.
ELSE.
    itab1-bukrs = s_bukrs-low.
    APPEND itab1.
ENDIF.
SELECT * FROM glt0 INTO CORRESPONDING FIELDS OF TABLE it_itab1
          WHERE rldnr   IN s_rldnr
          AND   bukrs   IN s_bukrs
          AND   ryear   IN s_ryear
          AND   racct   IN s_racct.
SORT it_itab1 BY bukrs.
LOOP AT it_itab1.
    AT END OF racct.
      w_flg = 'X'.
    ENDAT.
    SELECT SINGLE txt20 INTO (itab-txt20) FROM skat
              WHERE spras = sy-langu
              AND   saknr = it_itab1-racct.
    PACK it_itab1-racct TO it_itab1-racct.
    itab-racct = it_itab1-racct.
    w_total = it_itab1-hsl01 + it_itab1-hsl02 + it_itab1-hsl03 + it_itab1-hsl04 +
              it_itab1-hsl05 + it_itab1-hsl06 + it_itab1-hsl07 + it_itab1-hsl08 +
              it_itab1-hsl09 + it_itab1-hsl10 + it_itab1-hsl11 + it_itab1-hsl12 +
              w_total        + it_itab1-hslvt.
    IF w_flg = 'X'.
      READ TABLE itab1 WITH KEY bukrs = it_itab1-bukrs.
      IF sy-subrc = 0.
        SELECT SINGLE * FROM t001
            WHERE bukrs = itab1-bukrs.
        IF t001-waers = 'JPY' OR
           t001-waers = 'HUF'.
          w_total = w_total * 100.
        ENDIF.
        CASE it_itab1-bukrs.
          WHEN '1000'.
            itab-co_1000 = w_total.
          WHEN '1100'.
            itab-co_1100 = w_total.
          WHEN '1200'.
            itab-co_1200 = w_total.
        ENDCASE.
        COLLECT itab.
        CLEAR: itab, w_flg, w_total.
      ENDIF.
    ENDIF.
ENDLOOP.
SORT itab BY racct.
IF NOT itab[] IS INITIAL.
    PERFORM field_cat1.
    lv_count = 1.
    LOOP AT itab1.
      PERFORM field_cat USING itab1-bukrs.
    ENDLOOP.
    PERFORM display_alv_report .
ELSE.
    MESSAGE s000 WITH 'No records Found'(003).
ENDIF.
*&      Form display_alv_report
      text
FORM display_alv_report .
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = gd_repid
      is_layout          = gd_layout
      it_fieldcat        = i_fieldcat[]
      i_save             = 'X'
    TABLES
      t_outtab           = itab
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
ENDFORM.                    "display_alv_report
*&      Form field_cat1
      text
FORM field_cat1 .
i_fieldcat-col_pos     = 0.
i_fieldcat-fieldname   = 'RACCT'.
i_fieldcat-seltext_m    = 'Account'(001).
i_fieldcat-fix_column = 'X'.
i_fieldcat-emphasize   = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-col_pos     = 1.
i_fieldcat-fieldname   = 'TXT20'.
i_fieldcat-seltext_m    = 'Description'(002).
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
ENDFORM.                                                    "field_cat1
*&      Form field_cat
      text
     -->XV_BURKS   text
FORM field_cat USING xv_burks TYPE char4.
lv_count = lv_count + 1.
i_fieldcat-col_pos     = lv_count.
CONCATENATE 'CO_' xv_burks INTO i_fieldcat-fieldname.
i_fieldcat-seltext_m    = xv_burks.
i_fieldcat-just = 'C'.
i_fieldcat-no_zero = 'X'.
i_fieldcat-do_sum = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
ENDFORM.   "field_cat
Edited by: dhanashree wadkar on Apr 30, 2008 6:00 AM

OBIEE 10g AGO Function Dynamically Change the Heading

I created columns in my rpd named Sales Previous Month, Sales 2 months ago and Sales 3 months ago using the AGO Function. This is working fine.
My problem is when displaying these headings the users would like to see the Month Name instead of the Headings I created. For example if looking at a report for January the users would like to see:
Sales Previous Month = December
Sales 2 Months ago = November
Sales 3 Months ago = October
Is there any way to dynamically change the value of the column header to show the name of the month?

Hi SriniVEERAVALLI,
Thanks for the reply. I have found that I might haven't created the relationship between dimension and fact tables correctly.
I initially created the foreign key relationship (instead of creating complex join) in physical diagram between the dimension and fact table. And the relationship type is hence greyed out.
I have deleted the foreign key relationship in physical diagram. Then
1. In physical diagram, create complex join between dimension and fact . The relationship is 'inner' and can't be changed.
2. In Logical table diagram, create foreign key between dimension and fact . The relationship can be changed (inner, outer, etc).
Is this the correct way?
I tried these on two newly created dummy tables and it worked.

Is it possible to dynamically change the image in a Picture Field?

Is it possible to dynamically change the image in a Picture Field?
Thank you

Try using the In Proc RAS SDK.
[Here are the sample applications.|http://www.sdn.sap.com/irj/boc/samples?rid=/webcontent/uuid/b02c1cac-ad86-2b10-88ae-cb36551bab06] Take a look at the 'Add Image' sample.
Insert the picture at design or runtime and change the location / name of the image at runtime.
- Bhushan.

Dynamically change the document when the user opens it through a PDF Portfolio

Hello
I'm generating a PDF Portfolio using LiveCycle PDF Generator. I need to dynamically change the document that is presented when the user opens a PDF portfolio.
Can anyone give ideas on how to accomplish this using the portfolio and navigator API?
Thank you

That was it. What an operating system. It is very helpful to view files you are looking for. But if you have preview on you cannot save files.

Dynamically changing the report path

Is there any way to dynamically change the path where the reports are saved. Teststand 4.1.1
Message Edited by glennjammin on 04-21-2010 03:30 PM
Test Engineer
L-3 Communications
Solved!
Go to Solution.

Yes you can run a VI in the ReportOptions Sequence, add it to the Setup of that sequence. If you dont use FileGlobals.Dated anywhere else then use a Local instead. Just remeber FileGlobals are only global to sequences that are contained in a SequenceFile. They are not global across SequenceFile unless you are using the Batch Process Model.
You will probably have to set a number of other parameters up to work with ReportOptions.Directory. The best way to handle this is to setup up you exact conditions statically (ie via the Config | Report Options... menu ). Place a breakpoint in the ReportOptions (use a label if you dont have any steps in the ReportOptions sequence at the moment) and run your Sequence. Remeber to use Test UUTs or Single Pass. You dont have to use your full test sequence just create a simple one step sequence.
When you reach the break point, then you can browse the Parameters.ReportOptions and see what properties are required to ensure your reports are setup correctly.
Hope this helps.
Regards
Ray Farmer
Regards
Ray Farmer

Dynamically change the contents of one combo box based on the other

Hi Forum,
I have a question which might have a possibly simple answer. Well anyway help me out since i could not find the simple answer.
I am building an application using Swing and binding with BC4J using JClient. My GUI has combo boxes, grids, editboxes. My requirement is that i should be able to dynamically change the contents of one combo box based on the selected item in trhe previous combo box. For example, when i choose a country in the "country combo box", the "states combo box" should show the list of the states of the selected country.
Now how do i do this using binding. If not, how do i write custom querirs in BC4J layer and return a resultset to the remote application so theat i can populate the dependent combo boxes.
I will appreciate if anyone can help me out in this regard.
Thank You
Sumit

there could be quite a few number of ways of solving this problem.
One way is through event handlers.
taking your example as a model when user selects a country you could fire an action with a flag set to ture. A method will return the states from the DB or your temporary files or what ever and then the true flag will be used in the states combo box rendering.
other way: javascript
this might be a bit clumsy as you will need the states information in a property file and you can get the info as the user selects a country.
regards,
raj

Dynamic changing the LOV

Similar Messages

Maybe you are looking for