Dynamic columns in Business Workplace
Hi All ,
We have an issue with Dynamic columns in Business Workplace ....We have changed the standard layout of the inbox with additional Dynamic Column with displays the Last Reserved By user of the Workitem...
Issue is that - the value is not refreshed in the Dynamic column whenever user chooses the Refresh button in the inbox..
Please let me know how to update the Dynamic column on choosing refresh in the inbox..
Thanks for your help in advance...
Thank you
Srinivas
Are you sure it is not refreshing, i.e. sure it is not a problem in your customer part of the solution? Try changing your attribute so the dynamic column displays the (current) time, retrieved as a virtual attribute on the business object. Then see if it is updated when you refresh.
Similar Messages
-
"Dynamic column" in the workplace
Hi experts.
Do somebody know the possible uses of the "Dynamic column" field in the task registers of the Workflow inbox? You can add some dynamic columns via the "select layout" menu of the workplace but they seem to be empty.
I'm wondering if I can put some custom dynamic information on them via workflow definition (information such like users names or maybe some filter criteria) in order to help the user to show and order the active tasks easily.
Any help on this topic will be interesting for me.
Thank you all!!
IsmaelHi Ismael,
Dynamic columns are specific to each task, you can define them using tx SWL1.
Once defined, the dynamic column fields should now be available. However they do take a performance hit and obviously the fields are not applicable to all tasks. For this reason it is not a good idea to have a dynamic column as a default layout, but to use them in the in the task-based inbox views:
In the workplace view Inbox -> Workflow -> Grouped by task -> the task you just defined (you must have a workitem of that task already in your inbox). Define a layout and save it as a default, teach your users to navigate to a task if they want to use the columns.
Of course some users can still create their own workflow inbox view with dynamic columns if e.g. the majority of their work is a particular task.
Cheers,
Mike -
Special characters in SBWP dynamic columns are not showing for some users
Hi experts,
We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
Are there any workflow/user settings need to be changed.
Thanks
GopalI had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)
-
Dynamic column in Workflow inbox
HI All ,
I would like to add a dynamic column in the SBWP layout which reflects the Last reserved by user...
Any suggestion will surely be rewarded...
Thank you
SrinivasHi Srinivas,
the value will be updated each time the work item is <i>reserved</i>. When it is put back again, this value just stay as it was before.
The virtual attributes gets refreshed when the inbox is refreshed (by refresh-button or by re-entering the Workplace).
The algorithm to determine the last user, who has reserved, is the following:
DATA: user_id_last_reserved TYPE SWWLOGHIST-meth_user.
CLEAR user_id_last_reserved.
SELECT SINGLE meth_user
FROM SWWLOGHIST
INTO user_id_last_reserved
WHERE wi_id = object-key-workitemID
and method = 'SWW_WI_SELECT'
and timestamp IN (
SELECT MAX( timestamp )
FROM SWWLOGHIST
WHERE wi_id = object-key-workitemID
and method = 'SWW_WI_SELECT'.
IF sy-subrc <> 0.
"There's no such user
ENDIF.
Have fun,
Florin -
Define Dynamic column for integrated inbox
hi ,
can any one explain me what is the puprose of this setting.
SPRO>SRM>Cross application basic settings>sap business workflow>define Dynamic columns for integarted inbox.
what we maintain here and how it is helpful
regards
subhashHi Subhash,
Please check if the following link helps you:
How to add an extra dynamic columns in workflow inbox?
Regards,
Saumya -
Sbwp: limited number of dynamic columns
Hi together,
We use dynamic columns in sbwp.
Unfortunatelythe number of dynamic columns is limited to six.
Is there a chance to use more than six dynamic columns?
Thanks for any help.No,
You could use 1 column for more than 1 piece of data.
What is the weird business requirement that they need more than 6 dynamic columns?
Kind regards, Rob Dielemans -
Dynamic creation of business graphics.
Hi,
i have a piece of code which dynamically create a business graphics. If i use the same node data and create BG in statically.. i am able to view the graph. In case of dynamic creation , i am getting graphical rendering error. Have i missed something here..
The piece of code i had used is..
IWDBusinessGraphics bg = (IWDBusinessGraphics)view.createElement(IWDBusinessGraphics.class,null);
IWDCategory c = (IWDCategory)view.createElement(IWDCategory.class,null);
// c.setDescription("tableutility");
c.bindDescription(wdContext.getNodeInfo().getAttribute(IPrivateSDNUtilityView.IContextElement.TEST));
bg.setCategory(c);
bg.setDimension(WDBusinessGraphicsDimension.PSEUDO_THREE);
IWDSimpleSeries ss = (IWDSimpleSeries)view.createElement(IWDSimpleSeries.class,null);
ss.bindValue(wdContext.nodeDepartments().getNodeInfo().getAttribute(IPrivateSDNUtilityView.IDepartmentsElement.NO_OF_PEOPLE));
ss.setLabel("Simple Series");
ss.setLabel("No of People");
bg.addSeries(ss);
bg.setChartType(WDBusinessGraphicsType.COLUMNS);
bg.bindSeriesSource(wdContext.nodeDepartments().getNodeInfo());
bg.setIgsUrl("http://<hostname>:40080");
Please help.
Regards
BharathwajPlease got through following link
<a href="/people/sap.user72/blog/2006/05/04/enhancing-tables-in-webdynpro-java-150-custom-built-table-utilities:///people/sap.user72/blog/2006/05/04/enhancing-tables-in-webdynpro-java-150-custom-built-table-utilities -
A question about the dynamic colonnes in Business Workfplace
Dear experts,
I have a question regarding as the dynamic colonnes in Busienss Workplace.
Before, I thought that there were only 6 dynamic colonnes to add in the business workplace. But when I went to SPRO and tried to configure these dynamic colonnes. I found that it was configured by tasks. Does it mean that we could add at least 6 for each task?
As I was not able to test it, does anyone know the result?
THanksHi,
for more infop check the application help for SWL1 (help-->application help)
<a href="http://help.sap.com//saphelp_crm40sr1/helpdata/EN/bc/2e5cb396fc11d194c60000e82dec10/frameset.htm">http://help.sap.com//saphelp_crm40sr1/helpdata/EN/bc/2e5cb396fc11d194c60000e82dec10/frameset.htm</a>
Kind regards, Rob Dielemans -
How can we get Dynamic columns and data with RTF Templates in BI Publisher
How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991 224 1265-D30 USES fever TX
493991 224 1265-D30 HOW TO USE one tablet daily TX
493991 224 1265-D30 SIDE EFFECTS XYZ TX
493991 224 1265-D30 DRUG INTERACTION ABC TX
493991 224 1265-D30 OVERDOSE Go and see doctor TX
493991 224 1265-D30 NOTES Take after meal TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggestif you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ? -
I have a Workflow that sends a mail to an employee in some cases. The employee can see it at SAP Business Workplace, but he has to check it periodically to know if there are or aren't a new message for him.
Are there any way to tell him he has a message with a pop up a message or something like this?
I know on TX SO16 there is the parameter "No notification of unviewed mails at logon" wich is usefull, but only for logon. If the user is on the system and doesn't logout for whole day he will not know he has a new message until tomorrow, unless he check it explicitly.
Thanks!Hi,
Have you thought about the option to send a mail to the outlook of the user? As Glauco mentioned you can either send the mail to the outlook user by sending the mail through the send mail step of the workflow or make use of the report RSWUWFML2 to send the workitem itself to outlook and he can execute it from there.
Hope this helps,
Sudhi -
No Reply Function in ESS Business Workplace for SAP Mail
Hi ESS Experts,
We sent a short message using ESS Business Workplace. The receiver of the message was able to read the message but is not able to reply to it. We need to make sure this is not just a settings issue since replying to short message is allowed in R/3 Business Workplace. Is this expected behavior? Is there a way to enable a reply for ESS Business Workplace?
Thanks in advance for your help.
-Vladhi vlad,
please check the following user role is there are not SAP_BC_SRV_GBT_USER. and also further doucumentation please refer this [link|http://help.sap.com/saphelp_47x200/helpdata/en/1e/31a40415b711d4a39200a0c943858e/content.htm]
letme know how much i understood u rproblem
ravindra -
Hyperlink in OO-ALV to Sap-Business- Workplace-Dokuments
Hello specialists,
I have implemented hyperlinks to an oo-based ALV-List
( please see sample code later ). Now we have the problem that these hyperlinks only work in a local network-area.
But we have also foreign-departments on our SAP-system, that have no access to our network.
Now the question: is it also possible to create hyperlinks
assigned to SAP-Business-Workplace-documents ?
Do you have a solution for this problem ?
Thank' s in advance !
Best regards !
Oliver Perthen / Germany
*& Modulpool ZBWS_TESTSZENARIEN_LINK *
INCLUDE Z_LINK_TOP . "
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZTEST'.
SET TITLEBAR 'ZX'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL' OR 'ABORT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module create_object OUTPUT
text
MODULE CREATE_OBJECT OUTPUT.
CHECK G_CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT G_CUSTOM_CONTAINER EXPORTING
CONTAINER_NAME = 'CONTAINER'.
CHECK ALV_GRID IS INITIAL.
CREATE OBJECT ALV_GRID EXPORTING
I_PARENT = G_CUSTOM_CONTAINER.
ENDMODULE. " create_object OUTPUT
*& Module read_data OUTPUT
text
MODULE READ_DATA OUTPUT.
SELECT * FROM ZBWS_TESTSZENARI INTO TABLE ZTEST WHERE TESTER EQ
'RW#9952'.
ENDMODULE. " read_data OUTPUT
*& Module transfer_to_alv OUTPUT
text
MODULE TRANSFER_TO_ALV OUTPUT.
REPORT = SY-REPID.
CLEAR LAYOUT.
CLEAR FIELDCAT_D.
REFRESH FIELDCAT_D.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = 'ZBWS_TESTSZENARI'
I_BUFFER_ACTIVE = 'X'
I_BYPASSING_BUFFER = 'X'
CHANGING
CT_FIELDCAT = FIELDCAT_D[].
FIELDCAT-FIELDNAME = 'HL_FNAME'.
FIELDCAT-NO_OUT = 'X'.
APPEND FIELDCAT TO FIELDCAT_D.
LOOP AT FIELDCAT_D INTO FIELDCAT.
FIELDCAT-SELTEXT = FIELDCAT-FIELDNAME.
FIELDCAT-REPTEXT = FIELDCAT-FIELDNAME.
CASE FIELDCAT-FIELDNAME.
WHEN 'TESTDATEI'.
FIELDCAT-WEB_FIELD = 'HL_FNAME'.
ENDCASE.
MODIFY FIELDCAT_D FROM FIELDCAT.
ENDLOOP.
LOOP AT ZTEST.
ZTEST-HL_FNAME = SY-TABIX.
LS_HYPE-HANDLE = SY-TABIX.
LS_HYPE-HREF = ZTEST-TESTDATEI.
APPEND LS_HYPE TO GT_HYPETAB.
MODIFY ZTEST.
ENDLOOP.
LAYOUT-NO_KEYFIX = 'X'. " Schlüssel nicht Fixieren
LAYOUT-INFO_FNAME = 'COLOR'."Farbstufen
LAYOUT-SEL_MODE = 'D'. "Markierungsspalte
LAYOUT-SGL_CLK_HD = 'X'. "Sortierung per Click
LAYOUT-CWIDTH_OPT = 'X'.
CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'ZBWS_TESTSZENARI'
IS_LAYOUT = LAYOUT
I_SAVE = 'A'
IT_HYPERLINK = GT_HYPETAB
CHANGING
IT_OUTTAB = ZTEST[]
IT_FIELDCATALOG = FIELDCAT_D.
ENDMODULE. " transfer_to_alv OUTPUTHi.
I'll try it.
Thanks. -
Folders not available in SAP Business workplace(SBWP)
Hi,
When i click on any of the folder in SAP Business workplace,the folders are getting disappeared and i am getting the message "Folder inbox no longer available".
Please let me know if any one you have faced the same problem.
Regards,
KumarHi,
I have already refferd this Note,but this doesn't solved my problem.
Please let me know if there is any workaround for this issue. -
SAP BUSINESS WORKPLACE.
Talking about SAP BUSINESS WORKPLACE , someone knows if exists there options to change about rules of the kind of messages that arrives in the inbox. One message to the corresponding folder x and other message to other folder..
Other problem that i'm having is that: if click the worklow folder that contains subfolders i can't see all the documents in those folders but in qa i can.
The thing is that if i click in the tree the worklow folder that have subfolders i can't see all the documets.
Something know about that?.
thnks a lot.
REGARDS.
Fede-Take a look at CALL FUNCTION ... STARTING NEW TASK in your help documentation. Or you can use this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/04259f488911d189490000e829fbbd/frameset.htm
You will use DESTINATION NONE.
Let us know how it goes. -
UWL: The request cannot be started from the Business Workplace?
Hi All
Please assist I am currently trying to execute the standard leave request approval within the UWL.
This is the standard leave approval screen for workflow template WS12300111.
I get the below error in a SAP ECC easy web screen.
The request cannot be started from the Business Workplace
Message no. HRTIM_ABS_REQ066
Can anyone give me any insight to this as I have made multiple changes tothe UWL config.
Regards
MaahirBY seeing the error message I think you might have not registered the task in the Portal, as you are have mentioned easy web screen
1. When ever you are trying to execute the workitem from the UWL and you are able to See the SBWP SAP inbox in the browser then it means that the task of the workflow is not registered in the portal.
2. Please ask your portal team to register the task in UWL with corresponding visualization parameters.
[check for the parameters that are to be configured|http://help.sap.com/saphelp_nw04/helpdata/en/20/f0c82c9f6748c58d9ea14b3bbed93a/frameset.htm]
You cannot execute a leave workitem from the Inbox. if you try to execute then it prompts the error message that you have mentioned.
Try to do check all the below points.
1. Check whether the task TS12300097 is registered in the SWFVISU txn it should be using a Java Application. with the parameters
APPLICATION LeaveRequestApprover
DYNPARAM wi_id=${item.externalId}
PACKAGE sap.com/ess~lea
2. Second thing is make the task as General Task from the PFTC txn. so that the agent can approve
3. Ask the portal guys to register this task in the XML file where all the application specific task's are registred. and then try to execute the workitem, this time it will show you the leave request application.
Maybe you are looking for
-
I need help getting a Novatel Wireless Merlin S720 to work on my G4 PB
I need help with "Sprint Mobile Broadband Card Novatel Wireless Merlin S720. I have a Mac PowerBook G4 running 10.4.8 as follows: Machine Name: PowerBook G4 Machine Model: PowerBook3,3 CPU Type: PowerPC G4 (2.1) Number Of CPUs: 1 CPU Speed: 667 MHz L
-
when i use ver 29 i get past menu drop downs. when i get the automatic update to 33 or higher I can't get the pull down menu. I don't like to type in the search work every time I go to a web site. It should remember where I've been or at least let me
-
Version Management of ODI interfaces
Dear All, In a development envronment, if I need to configure, my ODI environment with any version managent system, what are the steps? which version management systems could be used for the same and how? How versioning of ODI objects is managened du
-
I usually play iTunes in DJ mode. Lately, the player quits playing after just a few songs. My library is on an external drive, and it has never been a problem. The dashboard indicates the player is in play mode, but the track does not advance. I h
-
HT204380 how to use facetime in saudia arabia
Dear Sir / Madam My Name Is Usama Sumar, 1) I am new user for Apple Product within 2 days i am going to purches Iphone5 from Saudia Arabia KSA. I heard that i can't use the face time option there, and mean main concern of buying this my wife using ip