Dynamic columns in UWL

Hi Experts,
I have added some dynamic columns to my SBWP worklist which are displayed fine. But these columns are not visible when i check my portal UWL, is there any setting i would have to tweak to get them displayed in UWL.
Thanks in Advance,
Chaitanya.

Hi,
The dynamic columns that you define in backend, will not work in UWL by default.
You need to configure the dynamic columns in UWL separately in UWL XML configuration. Refer to the UWL DTD. Basically you need to create a new view and the custom columns as custom attributes that you can then display in the view as custom columns. Try to search with these key words in SDN. Most probably someone has explained this and given some hints how to do it.
Regards,
Karri

Similar Messages

How to get the dynamic columns in UWL portal

Hi All,
I am working on UWL Portal. I am new to UWL. I have down loaded uwl.standard XML file and costomized for getting the values for "select a Subview" dropdown and I am able to see the values in the dropdown. Now my requirement is to get the dynamic columns based on the selection from dropdown value.
can any body suggest on how to get the dynamic columns in UWL portal.

Hi Manorama,
1) If you have already created a portal system as mentioned in following blog
/people/marcel.salein/blog/2007/03/14/how-to-create-a-portal-system-for-using-it-in-visual-composer
2) If not, then try to create the same. Do not forgot to give the Alias name .
3) After creating a system, log on to the VC, Create one iView.
4) Now Click on "Find Data" button from the list which you can view in right side to Visual composer screen.
5) After clicking on "Find Data" button, it will ask for System. If you have created your system correctly and Alias name is given properly, then your mentioned Alias name is appeared in that list.
6) Select your system Alias name and perform search.
7) It will display all the BAPIs and RFCs in your systems.
8) Select required BAPI and develop the VC application.
Please let me know if you any further problems.
Thanks,
Prashant
Do reward points for useful answers.

Dynamic Columns in UWL from the NWBC 3.0?

Hi People
Is there anyone that know how to change the UWL so it uses Dynamic Columns for Worklist . I know that it is possible to do this in the portal by changing the XML's to the UWL. But at the moment i am trying to get this to work from the NWBC 3.0.
When i setup the uwl in NWBC i use the dynpro application SWF_WORKPLACE.
thanks in advance.

Hi,
I have the same problem. Does anyone how to do it?
Thanks in advance,
Cecilia.
Edited by: Cecy_Vivar on Jun 22, 2011 12:15 AM

Showing Dynamic Columns in UWL

Hello guys
I m building a customized UWL using WDJ and the UWL API... Everything is working fine, except for one detail: I need to show a dynamic column created into swl1.
There is any way to do this? I looked for something into UWL APIs javadoc and didn't found nothing.....
Thanks

Hello guys
Thanks for you replies. I think that I was not clear in my question.....
I have already configured the UWL and created a simple application in WD....
The problem is that I need to bring an dynamic column created into swl1 transaction.... This column could be showed when you enter into R/3 inbox and select the "Change Layout" option, but this option is not avaliable into standard UWL. I tried to create an new application using the UWL API, but I couldnt access this column to....
The steps are showed at the follow prints: http://img33.imageshack.us/gal.php?g=swl1.jpg
Maybe this limitation is caused because the UWL is created to work with N types of workflows, so it could not be so specific ( Am I telling bullshit ?? ) .
Did you got my problem now... My English is poor, so maybe I cant expose my problems clearly.
Thanks

How can we get Dynamic columns and data with RTF Templates in BI Publisher

How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991     224     1265-D30     USES     fever     TX
493991     224     1265-D30     HOW TO USE     one tablet daily     TX
493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
493991     224     1265-D30     DRUG INTERACTION     ABC     TX
493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
493991     224     1265-D30     NOTES     Take after meal     TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggest

if you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ?

How to change recordset bahaviour to accept dynamic column names in the where clause

Hi
im using php-mysql and i make a recordset and i want to make the column names in the where clause to be dynamic like
"select id,name from mytable where $tablename-$myvar";
but when i do this my i break the recordset and it disappear
and when i use variables from advanced recordset it only dynamic for the value of the column not for the column name
and when i write the column name to dynamic as above by hand it truns a red exclamation mark on the server behaviour panel
so i think the only way is to change the recordset behaviour is it? if so How to make it accept dynamic column names?
thanks in advance.

As bregent has already explained to you, customizing the recordset code will result in Dreamweaver no longer recognizing the server behavior. This isn't a problem, but it does mean that you need to lay out your dynamic text with the Bindings panel before making any changes. Once you have changed the recordset code, the Bindings panel will no longer recognize the recordset fields.
Using a variable to choose a column name is quite simple, but you need to take some security measures to ensure that the value passed through the query string isn't attempting SQL injection. An effective way of doing this is to create an array of acceptable column names, and check that the value matches.
// create array of acceptable values
$valid = array('column_name1', 'column_name2', 'column_name3');
// if the query string contains an acceptable column name, use it
if (isset($_GET['colname']) && in_array($_GET['colname'], $valid)) {
$col = $GET['colname'];
} else {
// set a default value if the submitted one was invalid
$col = 'column_name1'
You can then use $col directly in the SQL query.

Saving result from sp_executesql into a variable and using dynamic column name - getting error "Error converting data type varchar to numeric"

Im getting an error when running a procedure that includes this code.
I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql
DECLARE @retval AS DECIMAL(12,2)
DECLARE @MonthVal VARCHAR(20), @SpreadKeyVal INT
DECLARE @sqlcmd AS NVARCHAR(150)
DECLARE @paramdef NVARCHAR(150)
SET @MonthVal = 'Month' + CAST(@MonthNumber AS VARCHAR(2) );
SET @SpreadKeyVal = @SpreadKey; --CAST(@SpreadKey AS VARCHAR(10) );
SET @sqlcmd = N' SELECT @retvalout = @MonthVal FROM dbo.CourseSpread WHERE CourseSpreadId = @SpreadKeyVal';
SET @paramdef = N'@MonthVal VARCHAR(20), @SpreadKeyVal INT, @retvalout DECIMAL(12,2) OUTPUT'
--default
SET @retval = 0.0;
EXECUTE sys.sp_executesql @sqlcmd,@paramdef, @MonthVal = 'Month4',@SpreadKeyVal = 1, @retvalout = @retval OUTPUT;
SELECT @retval
DECLARE @return_value DECIMAL(12,2)
EXEC @return_value = [dbo].[GetSpreadValueByMonthNumber]
@SpreadKey = 1,
@MonthNumber = 4
SELECT 'Return Value' = @return_value
Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric.

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql <<
This is so very, very wrong! A column is an attribute of an entity. The idea that you are so screwed up that you have no idea if you want
the shoe size, the phone number or something else at run time of this entity.
In Software Engineering we have a principle called cohesion that says a model should do one and only one task, have one and only one entry point, and one and only one exit point.
Hey, on a scale from 1 to 10, what color is your favorite letter of the alphabet? Yes, your mindset is that level of sillyity and absurdity.
Do you know that SQL is a declarative language? This family of languages does not use local variables!
Now think about “month_val” and what it means. A month is a temporal unit of measurement, so this is as silly as saying “liter_val” in your code. Why did you use “sp_” on a procedure? It has special meaning in T-SQL.
Think about how silly this is:
SET @month_val = 'Month' + CAST(@month_nbr AS VARCHAR(2));
We do not do display formatting in a query. This is a violation of at the tiered architecture principle. We have a presentation layer. But more than that, the INTERVAL temporal data type is a {year-month} and never just a month. This is fundamental.
We need to see the DDL so we can re-write this mess. Want to fix it or not?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Dynamic Column in PDF

Hello All,
I have a requirement to generate dynamic column in the PDF.
I have got the same running using the below code
HEADER : <?split-column-header:XXX_TIME?><?split-column-width:@width?><?XXX_TIME_FROM?>
DATA : <?split-column-data:XXX_START?><?EMP_NO?>
The issue I am having is if i generate the output in pdf with small amount of data,it will work but I am not sure how much data can come at run time.
It can be sometime more than 50 or more columns also.In that case it truncates the data.
How can i do the same.
Pls help.
Thanks
Sk

Increase the page size and printable page size, and reduce the column lengths,
so that you can accomadate them in single row.
BIP will run in single row, but we have option of making it to next row too.
But even if you make it in single row, page size has to support the length of the single row you are making :)..
so you got to increase the page width to Max

DataGrid with dynamic columns & renderers

I'm developing using Flash Builder 4 & Flex SDK 4.1.
I need to manage very dynamic DataGrid components and keep their definitions, which are all part of a complex item renderer of an Offers list.
The objects structure is simplified as follows -
Data: Model --> Offers ArrayCollection --> Offer VO --> DataGrid data ArrayCollection & DataGrid columns Array
View: List --> Offer Item Renderer --> DataGrid
1. Since the DataGrid's columns property accepts only an Array (not ArrayCollection), it seems like Data Binding for defining the columns is very problematic.
I tried to bind it to the source property of an ArrayCollection that would keep my columns definitions, but it didn't really work (mainly header display bugs).
What is the recommended way to keep the dynamic columns definition of a DataGrid?
2. Each column can have a set of dynamic properties, so I created a "mutant" - Column VO that extends DataGridColumn and got a dynamic properties ArrayCollection on it.
The columns got a custom header renderer that includes an icon when there are properties.
The header renderers got 4 main states (NotSelectedWithProperties, SelectedWithProperties, NotSelectedWithoutProperties & SelectedWithoutProperties).
However, the header renderer area seems a bit buggy when maintaning dynamic columns.
Any thoughts on the subject?
3. Anyway, I ended up recreating the DataGrid's columns Array very often (copying the columns definition on the offer's item renderer's dataChange event handler).
Note that the dynamic properties can be edited when the column is selected and I copy their values from the view back to the model when entering the state NotSelectedWithProperties.
This feels way too complicated and I really try to keep it simple, inspite of the required complexity.
Does anyone have better ideas?
4. In some cases the column's item renderer should also be modified into another DataGrid (grid-in-grid).
I used the MXDataGridItemRenderer with a DataGrid and included an ArrayCollection for the "newValue" returned by the editor.
(I use RendererIsEditor=true and on updateComplete populate that variable with the DataGrid's dataProvider contents)
When needed, I loop though the data objects of the parent DataGrid and populate the related field with an ArrayCollection of key-value objects that are displayed on the internal DataGrid.
After adding this feature I encounter very strange bugs -
a. After editing the grid-in-grid values and changing the column's state (selecting & deselecting), I get the following exception:
ArgumentError. Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/setChildIndex()
at mx.core::UIComponent/setChildIndex().......6993....
All I could find about this is that it might be related to some context error or something, but I'm really stuck on this one.
b. Sometimes another column might copy value from one row to another, running over the previous value.
I'm not sure exactly what sequence of actions causes this behavior, but it's related to that itemRenderer for sure.
c. Switching places with a column that uses the grid item renderer (headerShift) causes a stak overflow of StyleManager that tried to get style from the DataGridItemRenderer. This one I just found out, but couldn't reproduce a second time... strange!
I'm pretty sure this caused another problem that I don't remember at the moment.
The bottom line is that there got to be a better way to implement this feature within this already-complicated environment.
Maybe I'm doing something very wrong here...
Please advice and thanks for reading all this.

Update on item 4a -
This was a major issue (the main reason for opening this thread really) and I managed to resolve it!
As part of my application, I override the default DataGrid behavior for column selection (headerRelease event).
Instead of sorting, I change the column's header looks and define it as Selected (for showing its dynamic properties and enable its deletion).
At first I did this by setting styles, but the look didn't refresh unless I created a new instance of the header renderer.
Later I changed thi behavior to work with states, but I left the new header renderer instance creation commands and those lines created all the mess!
Conclusion -
If you define a custom header renderer for your datagrid column and then a custom item renderer, don't create a new instance of your header renderer!
It would still be nice to get some response for the other issues I raised.
Thanks and have a nice week.

Special characters in SBWP dynamic columns are not showing for some users

Hi experts,
We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
Are there any workflow/user settings need to be changed.
Thanks
Gopal

I had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)

Importing From Flat File with Dynamic Columns

HI
I am using ssis 2008,i have folder in which I have Four(4) “.txt” files each file will have 2 columns(ID, NAME). I loaded 4
files in one destination, but today I receive one more “.txt” file here we have 3 columns (ID, NAME, JOB) how can I get a message new column will receive in source. And how can I create in extra column in my destination table dynamically …please help me

Hi Sasidhar,
You need a Script Task to read the names and number of columns in the first row of the flat file each time and store it in a variable, then create a staging table dynamically based on this variable and modify the destination table definition if one ore more
new columns need to be added, and then use the staging table to load the destination table. I am afraid there is no available working script for your scenario, and you need some .NET coding experience to achieve your goal. Here is an example you can refer
to:
http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/
Regards,
Mike Yin
TechNet Community Support

Dynamic columns in ALV report

halo fellow SAPiens,
i need to show dynamic columns for a particular material........the scenario is as follows....
1) there r 7 fixed columns describing the material...
2)when the material returns back to the plant for some reason , i need to insert a column which shows the date and reason(char) of return.
3)again after dispatching the material for some reason it comes back again a new column shld be displayed showin the date and reason(char).
4)if the material doesnt come back...the report shows only 7 columns.
any solution?

try <a href="http://www.alvrobot.com.ar/home.php">here</a> ......its a useful tool for dealing with ALV
<b>reward points if useful</b>

Dynamic Columns in BI Report

Hi,
In my report i have dynamic columns and i am achieving this using <?split-column-header:header?> , <?split-column-data:variable?>
I need to define width for the dynamically created columns.
How do i achieve this.
i have seen <?split-column-width:name?>,<?split-column-width:@width?>
I tried <?split-column-header:header?><?split-column-width:@200pt?><?heading?><?end split-column-data?> but didn't succeed.
Please advice.
Regards
Jeethi George

Hi User
Try this link
Dynamic columns in OBIEE

Problem with dynamic column in SBWP

Hi Friends,
In SWL1 I have created two attributes with header as "CANCELLED" and " DESCRIPTION" for a particular task.But my SBWP is still showing columns as "Dynamic column" for the workitems of that task.
Please help me on this.
Thanks.
Dilip

Hi Dilip,
The column headings will only appear in the task-specific view. In other words, by default the headers will be generic because you can have mixed tasks in the worklist, and column 1 can be a date for one task and a company name for another.
The user needs to expand the tree on the left hand side and navigate to the "Approve Purchase Order" (or whatever) node to show only items of that task, then column headers should show up.
Regards,
Mike

Problem with dynamic columns in smartforms.

Dear SDN Experts,
I have a requirement in smartforms for dynamic columns.
i have used template with 10 columns, So from these 10 columns,Columns may vary monthly MIN 2 to MAX 10 depending on
readings with them for that month.
i cannot fix column headings also,Because headings also changes dynamically.
So Problem is if there is no data in columns,Columns is displayng empty.
For EX: In this month i have 2 columns data remaining all columns is displaying empty boxes.
Please suggest me a solution is this posible in smartforms if i use table also.
<removed by moderator>
Regrds,
MNR
Edited by: Thomas Zloch on Sep 11, 2011 3:50 PM

Hi friend,
See the link below it is having the solution of hiding the columns in smart forms
Hide table columns in smart form?
Create a table to display your values with 12 col and hide the columns based on the idea provided in the link above.
I think this will solve your issue if you still have queries please revert back to me i will help you.
Thanks,
Sri Hari

Dynamic columns in UWL

Similar Messages

Maybe you are looking for