Dynamic configuration lost in BPM

Hi,
My scenario : File->BPM(with several transformation steps)->File.
I would like to use the the dynamic configuration to have the sender Directory and FileName on the receiver side.
The dynamic configuration segment in the SOAP Header is "lost" after the BPM.
Do you know why?
Thanks,
Bela

Hi Moorthy,
"lost" => In the SXMB_MONI I can see the Dynamic Configuration segment in the SOAP Header before the message in transfered to the BPM. After the BPM the SOAP Header doesn't contain any Dynamic Configuration Segment.
If there is no transformation step executed inside the BPM the Dynamic Configuration is not lost.
I'm asking myself if it is not related to the fact that the mappings in the BPM are not executed on the same runtime, so the header is initilized again.
Thanks,
Bela

Similar Messages

Dynamic configuration not fil in reused OM in NW BPM

Hi,
I'm having problem in operation mapping that i re-used in nw bpm.
In my scenerio in the operation mapping, a UDF writes on "TServerLocation" and in the next step of BPM, i have receiver determination rule which read from "TServerLocation" variable.
Below step calls OM which in PI.
(UDF writes on TserverLocation)
This next step, reads TserverLocation in receiver tab of Integration Conguration.
Receiver rule
So the problem is dynamic configuration doesn't write on TserverLocation or integration confiuration object removes in soap header somehow.
This was a ccBPM integration and all esr objects, mapping,udfs working fine. No problem with that.
I checked below blog but not get this work.
Dynamic Configuration not working with Integrated Configuration
Has anyone faced similar problem ?
Thank you
-Tahir

HI,
In general Correlation , concept, whatever we configured in Correlation editor , i mean in runtime which xml element should filled with which element of which interface ..as you said you have configured the local correlation to block, in block it is the first receive step, while receiving the first message which is relevent to first recieve step , i mean if it receives the one message which is related to first receive step inteface .. the respective element data will be filled in correlation id and it will assign on giud for processing , so while assign the runtime data to correlation element ( imean filling stage) check you said two elements in correlation does the first message contains these two elements ??
if so ok , no then check , and try to use the IM before calling the IP to fill the payload.
Regards
Chilla
Oh closed!!
Message was edited by:
Chandra Sekhar Chilla
Message was edited by:
Chandra Sekhar Chilla

BPM Correlation from Dynamic Configuration not being filled

Hey guys,
I'm having the following problem with BPM correlation.
In my correlation definition, I have 2 fields: one which is filled with information from the message payload, and another one which is filled with a context object (which was created with adapter metadata and filled with dynamic configuration, as refered here: /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further).
All instances of BPM are with error status. And when I go into the workflow log for these processes, if I check the correlation object, it is like this:
<?xml version="1.0" encoding="utf-8" ?>
<CorrelationKey Version="001">
<Field1 />
<Field2>123456789</Field2>
</CorrelationKey>
Field1 is the one read from context object, and is not being filled (thus I think the error comes from here). Field2 is from payload and is being normally filled.
Any ideas on this matter?
Maybe the problem is not from the correlation. If not, what else could be the case? The BPM crashes on the very first step (one more reason to think that the correlation is the issue).
Thanks in advance,
Henrique.

HI,
In general Correlation , concept, whatever we configured in Correlation editor , i mean in runtime which xml element should filled with which element of which interface ..as you said you have configured the local correlation to block, in block it is the first receive step, while receiving the first message which is relevent to first recieve step , i mean if it receives the one message which is related to first receive step inteface .. the respective element data will be filled in correlation id and it will assign on giud for processing , so while assign the runtime data to correlation element ( imean filling stage) check you said two elements in correlation does the first message contains these two elements ??
if so ok , no then check , and try to use the IM before calling the IP to fill the payload.
Regards
Chilla
Oh closed!!
Message was edited by:
Chandra Sekhar Chilla
Message was edited by:
Chandra Sekhar Chilla

Two FileName in Dynamic Configuration

Hi All,
I have a very rare problem. In an interface which uses BPM, where file is the sender and Proxy is the target,
there is an ABAP Class in the mapping which uses Dyanmic Configuration to retrieve the FileName and create a Proxy structure and posts it to the ECC. In this scenario, Multiple files are picked from different folder using advanced Selection and sent to BPM which uses the ABAP Class.
When i run the interface with 5 different files placed at source, In SXMB_MONI, I can see that after 3 files are processed successfully with a single filename in the Dynamic Configuration, the 4th or the 5th one wil have 2 filenames in the dynamic configuration out of which the first filename will be the copy of the earlier processed filename and the second one wil be the actual required filename. The above behaviour keeps on chainging.
How can this be possible as the Context Object 'FileName' can have only single filename through out the interface instance, as there is no setting of the filename done in dynamic configuration.
Please reply if anyone has a solution to the above problem.
Thanks.

Hi Jaideep..
Thanks for the reply.
Yes.. its a serial processing. Let me explain a bit more.
as i said above, after the 3rd BPM instance (Just as an example.. keeps on chainging), the 4th instance has a unique filename compared to before 3. but after processing, the Dynamic Configuration in SXMB_MONI will have 2 fileNames. which will have a copy of any one of the earlier filenames along with actual filename.

File name cant be fetched from Dynamic configuration...mutli-mapping used

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

Dynamic configuration variable lifetime?

We are migrating from PI 7.1 to PI 731 and one of our applications uses dynamic configuration variable. It is a custom dynamic config variable saved in the first message (IDOC to PI BPM). We have asynch to synch scenario and send a synchronous message from BPM.
Once the response is received, the message is sent back from BPM (Second send step). During this message, we have a receiver determination (which uses the previously defined dynamic config variable). When I look at this message in sxmb_moni, I see no 'Dynamic Configuration ' and my receiver determination fails.. This used to work in PI 7.1 before and was curious if something was changed in PI 7.31?
I had noticed previously that dynamic configuration variable was removed when the logic went in exception processing of the BPM (even in PI 7.1).

As I had indicated, I was creating a custom dynamic configuration variable (with custom namespace and custom name). It was not a standard...
Essentially, a short cut to store the variable from input message (which will no longer be available in my response).

Getting an error in Dynamic Configuration

Hi Guys,
I need to dynamically post the file into different directories based on the file in the source payload.
In Receiver File Communication Channel
Target Directory : *
Filename : *
Checked the ASMA Attributes for filename and directory
Iam refering this weblog
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
In the mapping
<filename> ---> UDF --> topnode of target message.
My UDF is as below
public String Directory(String a,Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "Directory");
String FileName = conf.get(key);
FileName = a;
conf.put(key, FileName);
String Directory = conf.get(key1);
Directory = "/SAPInterface/XI/PPD/DHX/out";
conf.put(key1, Directory);
return " ";
But in runtime(moni) iam getting error as
com.sap.aii.af.ra.ms.api.MessagingException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header
Please suggest me how to correct this.
Thanks
Srinivas

Hi Srinivas,
You said you are having dynamic directories to post the file. But I see you hardcorded or put constant for directory which is /SAPInterface/XI/PPD/DHX/out. I think you need to put //SAPInterface/XI/PPD/DHX/out.
Try this in udf:
public String Directory(String a,Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "Directory");
String FileName = conf.get(key);
FileName = a;
conf.put(key, FileName);
Directory = "//SAPInterface/XI/PPD/DHX/out";
conf.put(key1, Directory);
return " ";
Put FileName and Directory in file name and directory paramters in receiver communication cahnnel and cehck.
Regards,
--Satish

Acces dynamic configuration variable (e.g. filename) in ABAP mapping class

Hi experts
I am searching for a possibility to acces a dynamic configuration variable (DCV) in an ABAP mapping class. Since I could not find a solution in SDN and other sources, I hope somebody in this forum can help me.
What I already found is the following code which can be used to set a DCV, but what I would be interested in is how to read a DCV.
Any help is appreciated.
Markus
METHOD if_mapping~execute.
DATA l_record type mpp_dynamic.
* copy payload
result = source.
* add an adapter specific attribute
l_record-namespace = 'http://sap.com/xi/XI/System/File'.
l_record-name = 'FileName'.
l_record-value = 'test.xml'.
dynamic_configuration->add_record( l_record ).
ENDMETHOD.

Hi Markus,
you can find everything in my blogs
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
Regards,
michal

Dynamic configuration required in sender file - Adapter Module

Hi Everybody,
I am developing an Adapter Module in the file adapter (sender) using Adapter Specific Message Attributes.
I am using Dynamic configuration inside the Module Process method in the adapter module.
We are getting an error saying Dynamic Configuration cannot be resolved.
Can anybody tell me the package to be used.
Thanks,
Zabiulla

You can access the dynamic configuration in adapter module like this:
Message msg = (Message) inputModuleData.getPrincipalData();
String fileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File", "FileName");
You do not need any addition library besides the adapter module API.
Hope that helps
Stefan

Dynamic Configuration File Names

Hi,
I have a RFC->XI->File scenario.
I have to put the target files names based on the calculation of values in 2 fields in the input.
I tried using Dynamic Configuration in my message mapping for this.
This is the code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String MyFileName = a + "_" + b +".xml";
conf.put(key, myFileName);
I checked ASMA in both the sender RFC adapter as well as the receiver file adapter.
But it never works.
I saw the dynamic configuration tab in SXMB_MONI but i can see only the RFC destination parameter.
Cant see the file filename parameter.
What is the problem here?

No need enable ASMA on RFC sender adapter.
See if the file channel is activated after selecting ASMA with FileName.
The UDF might not be use in the mapping. Check this.
Edited by: Praveen Gujjeti on Feb 23, 2010 1:05 AM

Problem in Dynamic Configuration bean

Hi
I am trying to dynamically change the filename using Dynamic Configuration bean with some constant value but target file is having same name as source. In communication channel logs I can see the successul pro

Hi,
M not sure what will be the error with this when u r using dynamic configuration bean.But same functionality can be better achieved by using this dyanamic configuartion UDF :
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, a);
return value;
Regards,
Anoop

Doubt om Dynamic Configuration of receiver file

Hello ,
for Acheiving the Dynamic configuration of receiver file name ,adapter specific message attribute is used...But how to suppress the name of file in the content of the Received file...
Is my question correct..do we get the file name in content of the receiver file,while using the Adapter specifc message attribute.
And another question ,in the Variable substitution ...do we get the above problem,then how to tackle the situation to suprress the file name in the payload of receiver file.

HI,
You can handle the dynamic file name via Dynamic configuration or with the help of Variable Substitution.
Please refer
have a look
Dynamic File Name using XI 3.0 SP12 Part - I --> Dynamic File Name using XI 3.0 SP12 Part u2013 I
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II --> Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
With Variable Substituion, you may need to supress the filename
Dynamic File Name - Suppress the Substitue varible
Let me know if you need anymore info.
Thanks
Swarup

Problem facing in Dynamic configuration in SAP PI 7.3

Hello,
I am doing dynamic configuration in sap pi 7.3. I am using the following UDF.
String devFileName="'a.vc'";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, devFilename);
I am using this UDF in message mapping and mapped this UDF in the message header.
I have selected the adapter specific message attribute in receiver communication channel also.
Still I am getting the folowing error.
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header
Exception caught by adapter framework: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header
'Transmitting the message to endpoint using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header.
Please help me what to do.
Thanks & Regards,
Moumita

Hi, try this code:
String devFileName="a.vc";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(FileName, devFilename);
ASMA checkbox and respective parameter should be enabled in the required Adapter.
Best Regards

Dynamic configuration in integration process using abap mapping

Hi everybody,
i have the following scenario:
file adapter -> integration process -> file adapter
The integration process uses an ABAP mapping and sets the filename in dynamic configuration as follows:
*-- Set Parameter
    clear ls_dyn_record.
    ls_dyn_record-name      = gc_dyn_config_name.
    ls_dyn_record-namespace = gc_dyn_config_ns.
    ls_dyn_record-value     = <new_file_name>
*-- Write configuration
    ir_dyn_config->add_record( ls_dyn_record ).
But now the new filename is not reflected in the file adapter (receiver). In the integration monitor (SXMB_MONI) i still find the old filename.
Whats wrong?
Elko

The ABAP mapping is more complex, setting filename in Dyn. Conf. is just one step in mapping.
If I check the Workflow protocol of the Integration Process, I find the following in the Trace of the ABAP-Mapping:
The filename has been set to 3233340.SWNF00HW.P10I. The Suffix P10I has been added in the ABAP mapping.
When I check the subsequent message in SXMB_MONI I find:
The added suffix is missing in the filename !!
Elko

Dynamic configuration- Is file name stored in any abap table in PI

Hi.
Is there any ABAP table in XI containing the dynamic configuration's xml of a message.
For any file scenario Can I get the file name from any of the abap table in PI
Regards,
Deepak

Interesting ABAP tables in XI
Interesting ABAP tables in XI Part I
Regards,
Phani

Dynamic configuration lost in BPM

Similar Messages

Maybe you are looking for