Dynamic Configuration Tool Issues

Hi,
Has anyone run into issues with the cisco dynamic configuration tool? I recently noticed I cannot customize the hardware I am trying to configure. This was not like this in the past.

Hi Laurence,
According to your description, you are creating a SQL Server Reporting Services report using SSAS cube as the data source, there are 40 parameters in the MDX query, so the performance is poor, right?
In your scenario, you said that 10 of the parameters using existing function, so you suspect that the issue can be caused by the existing function. Based on my research, it seems that the existing function is not a problem. Only issue is that use existing
function together with nonempty function, please refer to the link below to see the detail information about it.
http://cwebbbi.wordpress.com/2009/03/31/existing-and-nonempty/
In additional, I'd suggest you enable SQL profiler to monitor the queries fired by the query, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition
to improve the query performance. Here are some links about performance tuning.
http://www.bidn.com/blogs/DustinRyan/bidn-blog/2636/top-3-simplest-ways-to-improve-your-mdx-query
http://blogs.msdn.com/b/azazr/archive/2008/05/01/ways-of-improving-mdx-performance-and-improvements-with-mdx-in-katmai-sql-2008.aspx
http://www.packtpub.com/article/query-performance-tuning-microsoft-analysis-services-part1
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Similar Messages

Cisco dynamic configuration tool

Currently cisco dynamic configuration tool is not working. What can I do?

Richard,
The power supplies in the 6120 / 6140s are auto sensing for 120-240 VAC. Please see Table 9 in the Nexus 5000 document for all supported cables:
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-461802.html
Thank you,
Matthew

How can I fix a dynamic zoom tool issue for users of Reader v8?

I am publishing a PDF to be posted on the internet for downloading by end-users. The PDF is designed to open in full screen view, that is, without tool or menu bars visible. This means it would be helpful for me to embed additional functionality onto each page of the PDF for users who do not know keyboard shortcuts.
In doing so, I have found that when adding the dynamic zoom tool function via Acrobat's Advance Editing > Forms > Button Tool, the dynamic zoom tool only works in some versions of Acrobat Reader and not others.
I suspect this is because the dynamic zoom tool is accessed from different locations in different versions of Reader. Therefore, the instruction that I embed in to the button tool that relies on a menu-tree command ('find the tool in this location via the menu') cannot therefore be executed.
Fortunately, it appears that there is a javascript name available for the dynamic zoom tool that I can use instead of a menu-tree command. But unfortunately, it appears that the script name is different for different versions of Adobe Reader...
Not to be outdone, we have managed to write a small piece of javascript that, when assigned to the PDF using the button tool, identifies which version of Reader the recipient is using and activates the correct script name.
So far so good.
However, it now appears that version 8 of Adobe Reader has a higher level of security built in, so that javascript is security restricted and isn't allowed to run.
This of course means that the button I've included in the PDF to bring up the dynamic zoom tool doesn't work at all for end-users using Adobe Reader v8.
Getting the users to adjust their security permissions in the preferences is problematic and less than ideal. I really want the PDF to work 'out of the box' so to speak, without the users having to perform somersaults to get every element of the PDF to function fully as designed.
And seeing as the end-users are part of a public organisation and will not necessarily have the authority to update their software from v8 to v9 themselves, I am a little stuck.
So what's my query? I've got more than one:
• Is there a more detailed script I can assign using the button tool to get the dynamic zoom tool to work as outlined above in v8?
• Can I raise the security level of the dynamic zoom tool from within the PDF (that is, so that the dynamic zoom tool activates automatically and without end-user intervention, e.g. without downloading bits of code to place in file directories)?
• If I were to assign a digital ID/certificate to the PDF, would this allow the javascript to run unhindered?

If you are going to SET an IP, a Static IP, on the computer it has to be out of the DHCP pool range but in the overall IP range the router is using to hand out. So if the router DHCP range is 192.168.1.100 to .150 you have to assign a static IP to the computer either above the 150 or below the 100.
Right I've never had a problem with ha PC. But then I have never had a problem with my Mac either.
I suspect you have some type of hardware problem or a hardware and driver problem.

Configuration tool issue with new release

With this new release - September 2013 - We have found that when doing find products (as opposed to enter sku) the option to add seems to work - it gives a message that its added. But when returning to config the SKU has not been added. Its a bit anyoying as you then have to re-enter the SKU to add the product. - Several staff have observed this at our site.. Others ?

Hello Hsummons,
Thank you for brining this to our attention and we sincerely apologize for inconvenince this might cause.
Please be informed that in order for us to process your request with the steps to take on this concern. We are requesting that you may open a case with us or you may us at CCW Support 1-800-553-6387 options 2 and 3 or you may email us at [email protected] or [email protected]
With this, we may be able to assist you with the CCW Tool. Again, we aplogize for the inconevenience.
Thanks,
Jen
CCW Support Team

Configuration tool question

Hi there is a tool where you can assambly a device, I mean put the IOS and check if all the components I want are compatibles.
Can somebody help to find out this tool. Is free but I can not locate it.
Thanks

Hello,
are you referring to the Network Assistant ? Check this link:
Cisco Network Assistant
http://www.cisco.com/en/US/products/ps5931/
Or the Online Configuration Tool:
Cisco Dynamic Configuration Tool
http://www.cisco.com/appcontent/apollo/configureHomeGuest.html
HTH,
GP

Dynamic Configuratio tool

I can't find dynamic configuration tool, has it been removed?

Hi there,
The End of Life or "retirement" of DCT was September 2013;
http://www.cisco.com/E-Learning/gbo-ccw/cdc_bulk/Misc/Legacy_Retirement_for_How_to_Buy_Page.pdf
I believe the replacement is CCW
http://www.cisco.com/E-Learning/gbo-ccw/cdc_bulk/CCW_Configuration_Quick_Reference_Guide_for_Partners.pdf
Cheers!
Rob
"Your life is worth much more than gold."
- Bob Marley

Issue in Dynamic configuration in SOAP receiver channel

Hi All,
My scenario is file to SOAP. At receiver side I want to generate URL dynamically.
To proceed step by step, I started with passing a constant URL to Dynamic configuration UDF.
mapping:
Dynamic conf. UDF
Channel Configuration:
From testing, I found that channel always takes the url given in Target URL field and dynamic URL in TserverLocation is been ignored by the channel.
That is dynamic configuration is not working completely.
I went through a lot of blogs and also tried a lot of trial and error methods, but none helped. Every thing I configured looks perfect for me, but still not working. I don't understand where I went wrong. Please help me.

Hi Experts,
I am facing similar issue,
URL --> UDF --> @dynamicvariable
I have created a variable underparent node eg: DESADV-->dynamicvariable
passed complete URL to UDF, below is the UDF
& configured SOAP Receiver Channel as well. This is IDOC to IDOC scenario, using IDOC_AAE on sender side and SOAP on receiver in single stack.
--> Checked ASMA
--> Checked Variable Transport Binding and given "TServerLocation" without quotes in XHeaderName1
--> Target URL: http://
But when I am running this interface, nothing is coming in Dynamic configuration.
Ref: Message Log:
MM and OM is also perfect in ESR.
Any suggestions? Please advice.
Regards
Singh

Issues with nokia configuration tool 5.0 - E72

I wanted to install a new profile and save the old one for a few people.
Since typing on the PC is much easier, I hoped I could use the configuration tool
After reading the data it lost contact and couldn't find my phone again.
A new try after running PC-Suite 7.1 first:
it finds my phone (with latest firmware) but cannot import / read any data
Any ideas?
By the way: the change language options doesn't work (only English has been installed)

Hi,
I am experiencing similar issue: from PC Suite v 7.1.40.6 I can see the Nokia E72-1 mobile phone, from the Nokia Configuration Tool v 5 I can also see the Nokia E72-1 but from the Configuration Tool I cannot Edit Online the mobile phone and I cannot push a configuration either. This is weird !
Also, wether the phone is connected through USB or Bluettooht, I get the same results.
Anyone has an idea why this happens and how to solve the situation ?
Regards,
Bluea.

Dynamic Configuration Issue

Hi Experts,
My scenario is File to IDoc.
Once file has been picked up by the file adapter from source directory and it has to archived in other (target) directory with DIFFERENT file name.
By using following dynamic configuration code I have changed the file name, but I couldn't able to place this file with new name in archived folder. Please help me in this regard...
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String MyFileName = "INV.2920.1.CSV_"datetime+ ".xml";+
conf.put(key, MyFileName);
return MyFileName;

My scenario is File to IDoc.
Once file has been picked up by the file adapter from source directory and it has to archived in other (target)
directory with DIFFERENT file name.
this logic wont work....FileName cannot be determined Dynamically for the file to be archived.
Regards,
Abhishek.

Weblogic Portal Samples-Dynamic Visitor tools sample

Hi,
For configuring the DVT samples at weblogic portal it is mentioned that 'The DVT Sample is not supported for a production environment'. We are not clear with this point.
Will it work only for testing environment?
Is it require to take any licence for this at production environment?
We have used the DVT for Streaming Desktop and it works only when we enable the Dynamic Visitor tools sample in bea workshop while Adding the DVT Facet.
Please clarify the same.
Regards
Himanshu

Hi Himanshu
It should work for Production Env also and as far as I know you DO NOT need any extra or separate license just to support this DVT samples. As the word itself mentions "DVT Samples", since its a kind of sample utility, BEA/Oracle officially do not support it. It can be used freely either in Dev/Test or Prod Env. Just incase if you run into any major issues, which really breaks DVT and if it do not work, then Support may say it is not supported. But still I guess they will not leave it in the air. So best thing is, do full regression testing in Dev/Test Env and then move to the Production Env. It should work for any Env as far as you install the Samples while installing WLP 10.x and Enable this facet when you create the Portal Domain.
Thanks
Ravi Jegga

Dynamic configuration of listener in 10g

how can i dynamically configure listener?
if using Oracle configuration tools, then how can i start Oracle configuration tools?
Thanks in advance

See http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/listenercfg.htm#i490264
Cheers,
Colin

Variable substitution or dynamic configuration

Hi,
   I am doing Proxy sender to File receiver scenario. I have message payload like,
MTtest1..... 0..1
date.... 0..1
item....0...unbound
I want to create a text file with the name SAP<date>.
I am using a variable substitution method, date: payload: MTtest1, 1, date, 1
Target directory: SAP%date%
I am getting the filename correctly, But this creates a blank line in the top of the file. Please suggest me how to overcome this issue.
If a send the date at the end, how the it must be written in variable substitution method.
If I need to use dynamic configuration, please tell me how to do that, i saw few blogs, but i am not able to get it.
Thanks and Regards,
Sri

Dear Arunsri,
Better to use Dynamic Confi method becs its recommended by SAP also.
Please Follow the below steps.
(1)Create the UDF and pass Filename as an Input parameter as shown here.
public String Set_Output_File_Name(String var_Filename, String var_Directory, Container container) throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(key, var_Filename);
return "TRUE";
(2)In File receiver adapter configuration, select the Adapter Specific message attributes and in that select the Filename Option.
Regards
jagesh

Dynamic Configuration Error

Hi All,
I have tried a simple scenario following the blog:
/people/jin.shin/blog/2007/04/27/sap-netweaver-xi-variable-substitution-with-adapter-specific-message-attributes-via-dynamicconfigurationbean
I tried just the way as mentioned but getting error as "write property message.interface from key (http://sap.com/xi/XI/System/File)FileName with value null; "
The Filename is not populated from the source file name.
Can somebody please tell me what Iam missing.
Aslo in the blog, its mentined as Dynamic Configuration under XI Message Header, which is not displayed for me ..
Please help me in resolving this issue.
Thanks

Hi Rajesh,
I tried as you have suggested but still same issue.
My file is getting picked up but as the file name is not filled by Adapter module, Im not getting the output file generated.
when checked in Runtime workbench, communication channel got error as"
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header"
Thanks

Dynamic Configuration for IDOC

Hi,
Whenever an IDOC is send from SAP R3 system to PI (SAP R3 -> SAP PI -> Target), we get an additional node of Dynamic Configuration under the SOAP Header in SXMB_MONI.
Why is this happening? Does this happen for all the versions of SAP XI (PI)?
This issue does not occur when the IDOC is send by SAP PI to SAP R3 system (Source --> SAP PI --> SAP R3)
I am using SAP PI 7.1.1
Thank you,
Pankaj.

Hi,
Why this is an issue for you?
I am trying to send IDOC from SAP System to PI system.
Ideally there should be no DynamicConfiguration step under SOAP Header folder in SXMB_MONI (I tested a SOAP -> PI -> FILE and the Dynamic Configuration does not come); unless and until we make use of the ASMA properties (UDF/ Module). Is this understanding correct?
For example, if I send an IDOC i get the below details in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<SAP:DynamicConfiguration SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPOR">SAPPI</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPRT">LS</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPRN">SAPPISYSTEM</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPOR">SAPECC</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/Message/30" name="CALLER_CODEPAGE">4102</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPRN">SAPECCSYSTEM</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="CIMTYP"/>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="IDOCTYP">Z_VALIDATION_ACK01</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="MESTYP">Z1VALIDATIONACK</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPRT">LS</SAP:Record>
</SAP:DynamicConfiguration>
Is this behavior as expected?
Thank you,
Pankaj.

XSL mapping with Java enhancment PI 7.1 - Dynamic configuration

Scenario - IDOC -> File
XSL Mapping using dynamic configuration to set file name.
1. Ive included
xmlns:javamap="java:packageName.DynamicFunctionClass">
in the XSL header
2.Ive call this method javamap:transform($input, $output)
In the Java code.
1. Package = packageName
2. Class Name = DynamicFunctionClass
3. Class Compiles and I have uploaded into the ESR for a particular scenario. (source and class)
4. extends AbstractTransformation and implements the transform method.
public class DynamicFunctionClass extends AbstractTransformation{ .....
public void transform(TransformationInput arg0, TransformationOutput arg1) throws StreamTransformationException {
ISSUE -
Essentially it looks as though PI cannot see the class file or is not able to reference it. I have created a static method in the class as well to access and this does not work.
TRACE -
Resource not found META-INF/Services/javax.xml.parsers.SAXParserFactory Thrown:
com.sap.aii.ib.server.mapping.execution.MappingClassNotFoundException:

Ive stumbled across the fact that JDK 1.5 does not allow for Mapping with Java enchanment it is a feature only in SAPXMLTOOL kit, I shall tick the little box in the Operational mapping ...

Dynamic Configuration Tool Issues

Similar Messages

Maybe you are looking for