Dynamic Converter problem - Preview not available

Hi All,
I have a problem with Dynamic Converter.
After choosing to edit a particular template and then trying to preview a certain content item, a message is passed saying "Preview is not available". The strange thing is that we are running two different environments where the function is working fine on the other one.
Any suggestions regarding this?
Note: We are running 10gR3 with Dynamic Converter 8.1.0.754
thanks in advance!

The obvious question is: are you sure you're previewing a content item that's "convertible" and also exists?
The template editor only remembers the last content ID you picked. So if you pick item A for environment X and then B for environment Z, the editor will always load up B the next time you open up the editor. So if you edit the template in X again, and B doesn't exist in X, you'll get that error.
Don't know if your problem is as simple as that though. We're running DC 8.1.0.735 and don't get any preview errors outside of the scenarios I listed above.
Good luck.

Similar Messages

  • Preview not Available for NEF files

    It is my first time using LR and also my first time trying to download NEF files from my new D750. I removed the card from the camera and inserted it into my computer (MacBook Pro) I can see previews of the images shot in JPEG format, but those shot in RAW format are appearing as boxes with "Preview not available".  The D750 came with Nikon ViewNX2 software, which I downloaded, and I can see the previews on that. Any suggestions/ideas on what might be the problem?

    Lightroom does not support the Nikon D750 RAW photos at this time.
    Please read this thread:
    Support for Nikon D750
    Just released (see the message 49 of that thread) is a DNG converter that should allow you to convert the NEF to DNG and import those into Lightroom.

  • Flash CS5.5 Library Assets "Preview not available"

    Library assets essentially vanishing into thin air.  You either get blank white or "Preview not available" when you click on them.  And then when you click to Edit them, you get a memory error. 
    Still no fix for this guys?  2 years and a version upgrade later...unbelievable.  Adobe is a lost cause...

    The number of frames in each scene doesn't look like a problem.
    I would suggest you to Keep one scene and split your elements in Movie Clips instead of creating different scenes.
    Your explanation suggests that your scenes run continuously and there is no interaction by the user. So you can easily use 6 movie Clips in the timeline instead of Six Scenes.
    Let me know if this solution resolves your issue.

  • "Preview not available for this file" error message.

    I'm using LR 4.4 but it hasn't worked correctly since I got my new camera (Canon 70D). When trying to import I keep getting the "Preview not available for this file" error message. I had some better luck connecting the camera with a usb cable, that let me see the jpg images, but it would not let me see the raw (.cr2) images. Would I solve this problem by upgrading to LR5?
    I'm running LR 4.4 on a Windows 7 PC.
    Thanks for any help that can be provided.
    Robert

    Support for the Canon 70D was introduced with LR version 5.2. see the link below.
    Camera Raw plug-in | Supported cameras

  • Preview not available for this file on import

    I just transferred all my stuff from a vista computer to a new Windows 7. Lightroom 3.3 is now running as a 64 bit. I am importing tiff scans which were done on the Vista computer. At first everything was going fine, but now when I select files for import, all I can see are greyed out boxes which say "preview not available for this file". If I import the file, all is well, but I would like to see them in preview as well. Also, the program has crashed twice in the middle of an import.
    Thanks for any help!

    Yes, the larger preview is viewable. I'm using Vuescan to scan the files. Nothing has changed with the scanning from the previous scans which worked fine...same settings, same computer (not the new one).

  • LiveCycle Version 8-PDF Preview not available

    I am designing forms in LiveCycle version 8.0. The PDF Preview is not available. The help file says it's because I don't have Acrobat installed. I have Acrobat Professional version 8 installed. How do I get the PDF preview?

    This just started happening for me today. Yesterday Designer 8 was fine. PDF preview was available. Today, suddenly, it's grayed out in the menu and the PDF Preview tab is missing from the main window... POOF! Gone!
    I have already done a repair of Acrobat 8... how do I get the PDF PReview back? This is absurd!

  • Hide dynamic data if its not available

    Hi,
    I've something like this:
    User Name:
    <cfoutput>#profile.username#</cfoutput>
    I want to hide it when the data is not available. I only want
    to hide this row nothing else
    thanks.

    > The recordset returns value for other dynamic variables.
    Not for this
    > one, because this field is empty.
    <cfif Len(Trim(profile.username)) NEQ
    0><cfoutput>#profile.username#</cfoutput></cfif>

  • Preview not available

    Hello:
    I'm running Lightroom 3.6 on Windows XP.  My laptop crashed and I had to re-install Lightroom.  When I try to import my photos, I'm receiving "Preview is not available for this file".
    Can someone help me out?  Lightroom was working perfectly before the crash and I don't quite understand what happened during the install process.
    Thanks in advance.

    Just finished a similar exercise.  Finally figured out I needed to upgrade LR from 3.0 to 3.3 then to 3.6.  You might check to see if you are running in 3.0.

  • Convert to DNG not available in Bridge photo downloader?

    All of a sudden when I try to upload RAW photos from my Nikon D5100, "Convert to DNG" is shown in grey and will not let me select it in the photo downloader. I am having to use an outside converter instead. Also, the Camera Raw application is acting up - not letting me open images with Command + R, not saving image ratings of 5 stars, etc. Any ideas on how to resolve these issues? I am guessing that they are linked...

    It was all of a sudden...randomly and not after an upgrade as far as I am aware.
    Since you mention 10.9.3 which is a recent update it may well be caused by this update. Read the article Yammer provided and try that. Also as described in earlier post, restart Bridge holding down option (alt) key and from the menu choose reset preferences.
    But there have been some problems with recent ACR and DNG in photodownloader that should have been solved with latest ACR. So also try the manual download and install of the link Yammer provided.

  • PDF Preview NOT available!  HELP!

    In LiveCyle 8.0, I cannot preview my form as a pdf. There's no tab next to Design View, the preview option is greyed out on the View menu, and F5 does not work. Why??

    >I am having same problems - I have even reinstalled Adobe Professional 8 and Adobe Reader 8 - still grayed out under View...
    Maybe installing Reader is the problem. This isn't recommended.
    I have nothing to suggest except uninstalling both and reinstalling
    Acrobat only, but I cannot offer any particular hope it will work.
    Aandi Inston

  • NEF File Preview not available w Nikon D300

    Using Lightroom 1.3, when I attach the Nikon D300, 12 or 14 bit file, the NEF and jpg files do import successfully, but only the jpg files show in preview. The NEF previews are grayed out. Sorry if this topic is addressed. I cannot find anyone with a similar problem

    Are you importing directly from camera? For some reason on windows, you will not get previews when importing directly from camera using certain camera models. You should see them if you use a card reader or first copy them to your harddisk manually.

  • Font preview not available

    I've clicked on the box in preferences so that my fonts have a preview, but it still don't have a preview. How can I fix the problem?

    I've clicked on the box in preferences so that my fonts have a preview, but it still don't have a preview. How can I fix the problem?

  • Dynamic Discovery problem; does not read my dynamicloads changes

    I created a PEI based on IUserProfileActions. I added the appropriate <class name="My.Custom.AssemblyName"/> to the C:\bea\alui\settings\portal\dynamicloads\PEIs\UserProfileActions.xml and dynamic discovery is not picking up the change. I've restarted IIS, rebuilt my VS.Net project, rebooted my machine - ptspy shows 0 instances of UserProfileActions being read. I removed the dll from the bin folder to try and break it, but no go. I've even put junk assembly references into other PEI xml files (CommunityActions.xml), and it doesn't pick those up either. What am I doing wrong??? When I do their HelloWorldLoginActions demo it picks up the change in LoginActions.xml just fine. What gives?

    I have seen something like this when the class name in LoginActions.xml is not the same as the namespace in the code. In our case they were spelled the same just an upper/lower case difference. Nothing was in the ptspy report but the PEI didn't load.

  • Dynamic Components 1.2 not available in JSF 2.0 ?

    Hi,
    I would like to use Dynamic:form from "Dynamic Components 1.2" in 11g R2 (11.1.2.3.0) on a JSF. It seems that it is not possible to add a dynamic:form on a JSF. It does not appear when I drag and drop a data control. However, it appears when I drag and drop on a JSPX on the same project.
    Does it exist another way to have a dynamic:form on a JSF ? Is it going to be add ?
    All the tutorials I read always use JSPX, even in 11g R2, like this one:
    http://technology.amis.nl/2011/06/07/adf-11g-r2-adf-business-components-ui-categories-and-dynamic-forms-and-some-new-ide-features/
    Thanks,
    Alain

    The dynamic components are not part of the JSF2.0 part in 11.1.2.x.0. At the moment they only work for jspx files. If you use jspx files in 11.1.2.x.0 you can use the dynamic components.
    Timo

  • Enlarge preview not available

    Hello,
    I Wonder whether you can help me. Every couple of weeks IBooks posts previews on the page for some IDW comics, and I try to post them to my site for news. The problem is that pre- IOS 7 update I used to be able to click on each of these panels and they would full screen and then I screenshotted, but now when I click on it nothing happens. Is there anyway you guys know to make these full screen? Did Apple stop me from doing this or is it just my Ipad? Just that otherwise I have to screenshot and then crop each page from the full screen, leaving pixelated images,
    rthanks in advance,
    --Sam

    Support for the Canon 70D was introduced with LR version 5.2. see the link below.
    Camera Raw plug-in | Supported cameras

Maybe you are looking for

  • HP OfficeJet Pro 8000 does not print black

    Hi We bought an HP office pro 8000 printer which we have had in the box in a cupboard for the last 14 months (never been opened), I have finally got around to getting it out of the box ans setting it up, however it does not seem to print black only t

  • Using CONVERT_ABAPSPOOLJOB_2_PDF

    HI, I have a spool and passing it to CONVERT_ABAPSPOOLJOB_2_PDF to get converted to pdf. Though I don't get any errors data is not converted properly. I have around 2500 records and when I see the o/p table after fm it has got only 10 recs. Has anybo

  • Album/playlist downloaded from iTunes includes mpeg-4 video file?

    I have downloaded from iTunes an album that includes an mpeg-4 video file?  What is the best medium CD or DVD and format for burning the playlist?  Assume it could be played on a CD player (for sound only) or a DVD player.  

  • Update Flash Player to 9.0.124.0 Problems

    I uninstalled flash player 9.0.115.0 and then installed new version of Flash Player 9.0.124.0 I now have 3 places it is installed in compared to the 2 I had before. It is now located in : C:\WINDOWS\SYSTEM32\Macromed\Flash\Flash9f.ocx C:\Program File

  • 5.1 audio - HD DVD - Toshiba players

    Hello I have researched the forums for info on the proper mix of elements to make an HD-DVD with DVDSP that works on the toshiba set top boxes. I went to a best buy today armed with several discs to do some tests of my own. My findings mirror what I