Dynamic Creation of constraints.   Suggestion rqd

Hai
CREATE TABLE TDA
( PKNODAVE VARCHAR2(7 BYTE) NOT NULL ENABLE,
DTCREATION DATE,
DAVETRANSFERT VARCHAR2(7 BYTE),
PKPARC NUMBER(5,0)
ALTER TABLE TDA ADD CONSTRAINT PK_TDAV8 PRIMARY KEY (PKNODAVE)
ALTER TABLE TDA ADD CONSTRAINT FK_TDA1 FOREIGN KEY (DAVETRANSFERT)
REFERENCES TDA (PKNODAVE) ENABLE
i have a requirement to create a child table constraints with on delete cascade.
So i just did dynamic sql like this.
DECLARE
CURSOR tcur
IS
SELECT DISTINCT primary.table_name PARENT_TABLE ,
foreign.table_name CHILD_TABLE ,
foreign.constraint_name CHILD_CONSTRAINT ,
col.column_name FOREIGN_COLUMN ,
col1.column_name PRIMARY_COLUMN
FROM all_constraints PRIMARY,
all_constraints FOREIGN ,
all_cons_columns col ,
all_cons_columns col1
WHERE foreign.constraint_type = 'R'
AND foreign.R_OWNER = foreign.OWNER
AND foreign.R_CONSTRAINT_NAME = primary.CONSTRAINT_NAME
AND foreign.CONSTRAINT_NAME = col.CONSTRAINT_NAME
AND foreign.OWNER = col.OWNER
AND primary.CONSTRAINT_NAME = col1.CONSTRAINT_NAME
AND primary.OWNER = col1.OWNER
AND col.POSITION = col1.POSITION
AND primary.owner ='LOCAL'
AND primary.table_name ='TDA';
v_drop_sql VARCHAR2 (300);
v_create_sql VARCHAR2 (300);
v_count NUMBER;
v_t_name VARCHAR2 (30);
v_t_child_constraint VARCHAR2(100);
v_t_child_col_name VARCHAR2(100);
v_t_parent_col_name VARCHAR2(100);
v_t_child_table VARCHAR2(100);
BEGIN
FOR cur IN tcur
LOOP
v_t_name := NULL;
v_create_sql := NULL;
v_drop_sql := NULL;
v_count := 0;
v_t_child_table :=cur.child_table;
v_t_child_col_name :=cur.foreign_column;
v_t_parent_col_name :=cur.primary_column;
v_t_name :=cur.child_table;
v_t_child_constraint := cur.CHILD_CONSTRAINT;
--v_drop_sql           := 'ALTER TABLE ' ||v_t_name||' drop constraint  '||v_t_child_constraint;
-- EXECUTE IMMEDIATE v_drop_sql;
v_create_sql := 'ALTER TABLE '||v_t_child_table|| ' ADD CONSTRAINT ' ||v_t_child_constraint||' FOREIGN KEY( '||v_t_child_col_name||')
REFERENCES '||v_t_child_col_name||'('||v_t_parent_col_name||') ENABLE ON DELETE CASCADE';
dbms_output.put_line(v_create_sql);
EXECUTE IMMEDIATE v_create_sql;
END LOOP;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(v_create_sql);
END;
the pl/sql preocedure executes successfullly. but there is not constaint created why...?
Pls give your suggestions
S

Oracle beginner wrote:
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(v_create_sql);
END;
the pl/sql preocedure executes successfullly. but there is not constaint created why...?Are you sure it's executing successfully? You are capturing all exceptions with your WHEN OTHERS clause and ignoring any errors.

Similar Messages

  • Dynamic Creation of UI in adobe forms??

    Hi Experts,
    I need to create a dynamic interactive form and dynamic UI elements in the interactive form.
    As per my requirement I need to display a pdf and I will be getting values from the RFC's. I need to show the form segments and the UI elements only when there's a data from the RFC else not. I am unable to understand whether this requirement needs generation of the UI elements dynamically or I can do it statically as well.
    The form thus generated will be having data from the RFC which based on the data quantity may exceed to n number of pages.
    In case it needs dynamic creation can you suggest me please how to achive it in interactive forms?
    Helpful answers will be appreciated.
    Warm Regards,
    Gaurav

    Hi,
    subForm1:-
    Flow content
    Allow page breaks
    Place: following previous-----> This means when you are repeating the subform the previous one should be followed.
    Say you have a table and have 3 columns in it.
    After 1st column is completed, the next column should come with 1st comun
    After: Continue filling parent--->Continously fill the data with the parent element
    Repeat sub form min count is 1 : Minimum of 1 line item will be printed
    Height: Expand to fit is true.: If the field height is increased it automatically expands.
    For help in Adobe Press F1 or Goto Help--> Adobe Designer Help in Adobe Designer
    After installing Adobe Designer, goto the specific folder
    C:\Program Files\Adobe\Designer 8.0\EN you can get sample documents.
    For help press F1 after opening designer.
    Sub Form1: Content--> Flowed, Flow direction --> Top to bottom
                       Binding --> Check the checkbox Repeat Subform for each data item
    Subform 2: Content --> Positioned, No pagination No binding settings changes needed.
    Hey i forgot to mention the Header Subform where you create all these subforms should be flowed.
    Try it once like this and lte us know
    Edited by: Sankar Narayana on Oct 3, 2008 5:06 PM

  • Dynamic creation of TabStrip

    Hi,
    I want to create a tabstrip dynamically.The tabstrip should have 3 tabs, and in each of the tabs i want to put some UI elements like a label, input field, dropdown, tables.........etc.
    Im able to create the tabstrip and add tabs to it dynamically.
    I've even created the UI elements which i wanted to put in the tabs.............But im not able to proceed as i dont know how to add the UI elements to the tabs.......
    Can anyone tell me how to add UI elements to a tab in a tabstrip?
    Regards,
    Padmalatha.K
    Points will be rewarded.

    Hi,
    Following code will help you to understand the dynamic creation and adding them
    //Tabstrip
           IWDTabStrip tabStrip = view.createElement(IWDTabStrip.class);
           //Tab
           IWDTab tab = view.createElement(IWDTab.class);
           //Input Field
           IWDInputField inputField = view.createElement(IWDInputField.class);
           //Adding inputfield to tab
           tab.setContent(inputField);
           //Adding tab to tabstrip
           tabStrip.addTab(tab);
    //Finally add this tabstip to either your root container or some other container.
    Regards
    Ayyapparaj

  • Dynamic creation of ComponentUsage

    Hi people,
    I want to reuse a view (ViewA) in different views (ViewB, ViewC, ViewD).ViewA has a quite complex logic, so it is necessary to outsource this view.  Not only the logic, but also the count of UIElements and contextelements is quite large, for this I don't want to implement this part redundant in the views A, C and D.
    I have to use ViewA in a table in  the TablePopin UIElement. Every line of the table should have its own instance of ViewA. Is that possible?
    My idea is it, to put the view in an own component. For every tableline I need an instance of the componentUsage. My problem is now, that I'm not able to create at runtime a ComponentUsage and at designtime I don't know how many instances I need. Is it possible in webdynpro to create dynamic instances of ComponentUsage?
    If you know an other way, that prevents me from implementing the view and its logic more times, please tell me!
    Thanks in  advance,
    Thomas Morandell

    Hi Thomas,
    just for clarification. Principally it is possible in Web Dynpro to dynamically create new component usages of the same type like an existing, statically declared one. This means after having defined a component usage of type ISomeComp (component interface definition) you can dynamically create new component usages which all point to the same component interface definition ISomeComp:
    wdThis.wdGetISomeCompUsage().createComponentUsageOfSameType();
    But this dynamic creation approach implies, that you must also embed the component interface view of this component usage to the view composition dynamically; and this is (unfortunately) quite cumbersome and complicated based on the existing Web Dynpro Java API (it is not yet optimized for a simple dynamic view composition modification.
    Additionally, like Valery pointed out, the dynamic creation of new component usages is not compatible with table popins.
    Regards, Bertram

  • Dynamic creation of date in selection variant

    Hi All,
    I have a Z program for updating a field in BOM item. One of the input field in the report is "Valid From Date". Actually the current date is automatically fetched through a function module and it is defaulted in that field. 
    Our client is using selection variant for ease of use. The problem here is old date in the selection variant  is replacing the current date. I want current date to be created automatically during insertion of variant also. How can i solve this problem. Is there any selection variable inside the variant for dynamic creation of Date?
    Thanks
    Sankar

    As I know there is no setting for this. For any std or Z report variant function with L should act same way...anyway you discuss with your ADABer.
    See the help for variables
    Selection Variables                                                                               
    The following three types of selection variables are currently          
        supported:                                                                               
    o   Table variables from TVARV                                          
            You should use these variables if you want to store static          
            information. TVARV variables are proposed by default.                                                                               
    o   Dynamic date calculations:                                          
            To use these variables, the corresponding selection field must have 
            type 'D' (date). If the system has to convert from type T to type D 
            when you select the selection variables, the VARIABLE NAME field is 
            no longer ready for input. Instead, you can only set values using   
            the input help.                                                     
            The system currently supports the following dynamic date            
            calculations:                                                       
            Today's date                                                        
           From beginning of the month to today                               
           Today's date +/- x days                                            
           First quarter ????                                                 
           Second quarter ????                                                
           Third quarter ????                                                 
           Fourth quarter ????                                                
           Today's date - xxx, today's date + yyy                             
           Previous month                                                                               
    o   User-specific variables                                            
           Prerequisite: The selection field must have been defined in the    
           program using the MEMORY ID pid addition. User-specific values,    
           which can be created either from the selection screen or from the  
           user maintenance transaction, are placed in the corresponding      
           selection fields when the user runs the program.                                                                               
    The SELECTION OPTIONS button is only supported for date variables that 
       fill select-options fields with single values.                         
    i.e means we can do that with D also.

  • Dynamic creation of business graphics.

    Hi,
    i have a piece of code which dynamically create a business graphics. If i use the same node data and create BG in statically.. i am able to view the graph. In case of dynamic creation , i am getting graphical rendering error. Have i missed something here..
    The piece of code i had used is..
         IWDBusinessGraphics bg = (IWDBusinessGraphics)view.createElement(IWDBusinessGraphics.class,null);
              IWDCategory c = (IWDCategory)view.createElement(IWDCategory.class,null);
         //     c.setDescription("tableutility");      
              c.bindDescription(wdContext.getNodeInfo().getAttribute(IPrivateSDNUtilityView.IContextElement.TEST));                                                                               
    bg.setCategory(c);
              bg.setDimension(WDBusinessGraphicsDimension.PSEUDO_THREE);
              IWDSimpleSeries ss = (IWDSimpleSeries)view.createElement(IWDSimpleSeries.class,null);
              ss.bindValue(wdContext.nodeDepartments().getNodeInfo().getAttribute(IPrivateSDNUtilityView.IDepartmentsElement.NO_OF_PEOPLE));
              ss.setLabel("Simple Series");
              ss.setLabel("No of People");
              bg.addSeries(ss);
              bg.setChartType(WDBusinessGraphicsType.COLUMNS);
              bg.bindSeriesSource(wdContext.nodeDepartments().getNodeInfo());
              bg.setIgsUrl("http://<hostname>:40080");
    Please help.
    Regards
    Bharathwaj

    Please got through following link
    <a href="/people/sap.user72/blog/2006/05/04/enhancing-tables-in-webdynpro-java-150-custom-built-table-utilities:///people/sap.user72/blog/2006/05/04/enhancing-tables-in-webdynpro-java-150-custom-built-table-utilities

  • Dynamic Creation of Buttons and Actions HELP

    Hi there,
    I have got a problem (or maybe even two) with the dynamic Creation of buttons. The code below creates the buttons.
    My main problem is, that the parameter created for the button's action isn't propagated to the assigned event handler. I get a null, though the name of the parameter in the event handler and the name of the parameter added to the action are the same.
    Could it also be that I'm always using the same action? I.e. does wdThis.wdGetAddElementAction() always return the same action instance? If yes, how can I create individual actions for each button?
    Any help is appreciated!
    Cheers,
    Heiko
    "    for(int i=rootContainer.getChildren().length; i<wdContext.nodeFeature().size();i++)
                   IPrivateVCT_Feature.IFeatureElement featureElement = wdContext.nodeFeature().getFeatureElementAt(i);
                   IWDTray featureTray = (IWDTray) view.createElement(IWDTray.class, featureElement.getName());
                   IWDCaption header = (IWDCaption) view.createElement(IWDCaption.class, featureElement.getName()+"_Header");
                   header.setText(featureElement.getName());
                   featureTray.setHeader(header);
                   featureTray.setExpanded(false);
                   rootContainer.addChild(featureTray);
                   IWDButton button = (IWDButton) view.createElement(IWDButton.class, featureElement.getName()+"_Button_AddElement");
                   IWDAction actionAddElement = wdThis.wdGetAddElementAction();
                   actionAddElement.getActionParameters().addParameter("featureIndex", new Integer(i).toString());
                   button.setOnAction(actionAddElement);
                   button.setText("Add Element");
                   featureTray.addChild(button);

    Hi Heiko,
    You have done everything correctly....except for 1 line
    in the code...
    Replace the following line in your code:
    actionAddElement.getActionParameters().addParameter("featureIndex", new Integer(i).toString());
    Replace the above line with this code:
    button.mappingOfOnAction().addParameter("featureIndex",i);
    Actually in your code, you are not associating the parameter with the button...
    Note that addParameter(...) comes with two signatures: addParameter(String param, String value) and addParameter(String param, int value). You can use any of them based on yuor need.
    Hope it helps,
    Thanks and Regards,
    Vishnu Prasad Hegde

  • Dynamic Creation Form

    Hi friends,
    Is there a way to create dynamic creation forms in ADF,in jdev 10.3.3?
    By this I mean--I need to populate a table in my DB and on my page I have an add button,
    now at each click of add button,a new creation form should be displayed on the page one below the other.
    finally there would be a Save button that would save all my entries to the table.
    I searched a lot for the same...Please do help if anybody has any ideas..
    Thnks in Advance..c ya
    kavitha
    Edited by: user6403440 on May 5, 2009 2:22 AM

    Hi,
    well, the easiest would be to create an updateable table and add new rows. If you need a form then you can use af:forEach or af:iterator with the table binding to render input form elements (more like a custom table rendering). However, its quite a bit of development that is required for this.
    Frank

  • Dynamic Creation of form

    Hi,
    I need to create a web dynpro form that will filtered the fields to be displayed or set the property (mandatory or read only) based on 5 criteria selected by user. Due to complexity of the form, i need to create the form dynamically during run time in order to cope for occasional changes, thus minimum effort required for changes in DB, eventing, GP etc.
    Anyone has any suggestion of how can i store the UIs, validation, and etc that relevant to the form creation? So that it's feasible to create the form during runtime by just read everything that is given from the source.
    However i am understand that i can create the UI at runtime.

    You will have to write the code in doModify
    IWDAttributeInfo attinfo =
    wdContext.getNodeInfo().getAttribute("<attribute name>");
    IWDInputField ip = (IWDInputField)view.createElement(IWDInputField.class,null);
    ip.bindValue(attinfo);
    Like wise if it is a checkbox
    IWDCheckBox cb = (IWDCheckBox)view.createElement(IWDCheckBox.class,null);
    cb.bindChecked(<attribute info>)
    chk it
    http://help.sap.com/saphelp_nw04s/helpdata/en/94/29984197eb2e7be10000000a1550b0/frameset.htm

  • Using Flex 2 for dynamic creation of a Flex 2 application at runtime

    We're looking to replace our existing end-user development
    environment and believe Flex 2 may be able to satisfy our
    requirements. However, without spending a month trialing the
    product I thought some existing user(s) could suggest (based on
    personal experience) whether we'd be straining Flex 2 in expecting
    it to be able to provide dynamic runtine generation and execution
    of an application based on the meta-data associated with each
    component. The generation of each component includes automatic form
    and code generation, with end-user tailoring facilities to maintain
    the meta-data (tabs, fields (visibility, location, business rules,
    actions, validation etc.), display format, drill-down, work-flow
    etc.), for use in the next instantiation of each conponent.

    I know of at least one of our customers (not sure if I can
    say which) is doing this. They use Flex to compose MXML files and
    then send that to a server. The server than compiles that into a
    SWF.
    So it is possible, just a lot of work.

  • Dynamic Creation of Items in Runtime through Application UI

    We have a requirement where the Users wanted to have an option of creating an item dynamically. We developed and deployed a very simple application but the users want to have the flexibility of adding new columns (without vaildations and processing - just data) to some of the existing regions. They are not IT people and want a simple interface to add columns without IT involvement.
    I thought of two options.
    (a) To pre-create around 10 items in the table with column names as customize1...customize10 with varchar2(1000). Have a configuration table which stores the column names and Label. Create a Report based on a Pl/SQL function returning query, and using HTMLDB_ITEM to dynamically populate them. Iam not very keen about this approach as do not want to create unnecessary columns and have to do a lot of manual processing for the data manipulation.
    a.1. Can we create a form (not a report) based on a pl/Sql function returning query.
    (b) To have an interface which does an "Alter Table .... add column ...." to create the new column. In this case how can we include this column to an existing form. Can we use HTMLDB_ITEM to add (create) columns to an existing region?
    (c) Any other suggestion ?
    Would appreciate an answer on the way to go forward to this, and also to a.1.
    Thanks

    Hi Marc,
    Thanks. I just tried something like this. Taking the EMP table example, (it doesn't matter which table), I created a region based on a Pl/Sql function returning SQL query
    ( I selected the vertical report template including nulls to display it like a form ) :
    DECLARE
    v_sql VARCHAR2(3000) ;
    mn_idx NUMBER := 1 ;
    BEGIN
    v_sql := 'SELECT ' ;
    FOR recs IN (SELECT * FROM ALL_TAB_COLUMNS WHERE TABLE_NAME = 'EMP' ORDER BY COLUMN_ID)
    LOOP
    v_sql := v_sql || 'HTMLDB_ITEM.TEXT(' || mn_idx || ',' ||
    recs.column_name || ') ' || recs.column_name || ', ' ;
    mn_idx := mn_idx + 1 ;
    END LOOP ;
    v_sql := SUBSTR(v_sql, 1, LENGTH(v_sql) -2) ;
    v_sql := v_sql || ' FROM EMP WHERE EMPNO = 7369 ORDER BY 1 ' ;
    RETURN v_sql ;
    END ;
    This allowed me to do my updates etc.., Then I created a button called 'Apply' and a process called 'update_changes' on button click and defined this:
    DECLARE
    v_sql varchar2(1000) ;
    mn_ctr NUMBER := 1 ;
    BEGIN
    v_sql := 'BEGIN UPDATE EMP SET ' ;
    FOR recs IN (select COLUMN_ID, COLUMN_NAME, DATA_TYPE
    from all_tab_columns where table_name = 'EMP'
    ORDER BY COLUMN_ID) loop
    -- Make changes here if required- this is assuming 9 columns --
    v_sql := v_sql || recs.column_name || ' = HTMLDB_APPLICATION.G_F0' || mn_ctr || '(1),' ;
    mn_ctr := mn_ctr + 1;
    end loop ;
    v_sql := substr(v_sql, 1, length(v_sql) - 1) ;
    v_sql := v_sql || ' WHERE EMPNO = 7369; END ;' ;
    execute immediate (v_sql) ;
    END ;
    Since this is for example, I didn't include code for Checksum and hardcoded empno = condition and have provision for 9 columns. I made some changes and tried saving it and I was able to do it.
    I altered the table to add a column / drop a column and when I relogin, Iam able to see the changes.
    Can you tell me if there could be any drawbacks in this approach ?.

  • Dynamic creation of record group

    Hi
    Can anyone suggest me with an example about how to create a dynamic record group and attach it to a lov ?
    Regards

    Hi,
    Thanks for your reply
    DECLARE
    rg_name VARCHAR2(40) := 'COMPANY_RANGE';
    rg_id RecordGroup;
    errcode NUMBER;
    lov_id LOV;
    BEGIN
    :System.Message_Level := 0;
    rg_id := Find_Group( rg_name );
    IF Id_Null(rg_id) THEN
    rg_id := Create_Group_From_Query( rg_name||'_TMP', 'select COMPANIES_ID from SYSMODULE.COMPANIES where 1=2');
    Set_LOV_Property(lov_id,GROUP_NAME,rg_name||'_TMP');
    rg_id := Create_Group_From_Query( rg_name, 'select COMPANIES_ID from SYSMODULE.COMPANIES');
    IF Id_Null(rg_id) THEN
    Message(' Create group failed');
    Message(' ',no_acknowledge);
    Raise Form_trigger_failure;
    End if;
    END IF;
    errcode := Populate_Group( rg_id );
    lov_id := Find_LOV('LOV7');
    Set_LOV_Property(lov_id,GROUP_NAME,rg_name);
    END;
    The above code, I have placed in when new form instance .. still the same error
    when new block instance --- same error
    in push button --- same error
    FRM-30048: Unable to find record group .
    LOV LOV7
    Form: DYNAMIC_LOV_CREATION
    FRM-30085: Unable to adjust form for output.
    Where i am going wrong ..
    Regards

  • Dynamic Creation of Entity Objects (ADF Business Components)

    Hi All,
    We have a requirement to create Entity Objects for the dynamically generated tables in our application and at the same time bind them to different views.
    Our product create multiple tables at runtime with some sort of naming convention, and we couldn't find a way in JDeveloper to generate entity objects for the tables created dynamically.
    Please provide some pointers if you have experienced or worked on similar requirement.
    Thanks,
    Nikhilesh

    Thanks for the help Sudipto.
    The link which you have shared, describes the creation of an entity object and then modify the operations like Delete Update and Insert etc to be performed on the entity object by creating IMPL classes and implementing certain interfaces.
    But I need to create Entity objects dynamically. My application creates new tables for some functionality at the run time and I have to create Entity objects for those new tables as soon as the new tables are created.
    I was just wondering if, there is any API available for creating the entity object from Java code instead of invoking the wizard in the Jdeveloper.

  • Dynamic creation of control

    Hi is it possible to create control buttons in run time based on the input given by the user.Do any one have the demo program

    Intaris a écrit:  Yes, but that's not strictly creating controls, is it?  It's mimicing controls. It's certainly a nice feature to have when you come up against a fundamental limitation of LV, but I think someone who is not yet aware of the fact that LV in itself does not support dynamic control creation should try first to write code in a way that is compatible with this....
    My point of view is different. When somebody ask a question, for which there is indeed a solution, I'll try to avoid saying "No, there is no solution". I'll balance my reply to take into account "environment" parameters (difficulty, cost, time, compactness...). As a university professor, this is a situation I have to face with my students on a daily basis. And, from experience, I found it is most often more rewarding for everybody to say "Yes you can...but...". It leaves the parter the possibility to decide himself if the solution fits his needs.
    In the specific case of LabVIEW limitations, I also think that it is better to acknowledge the limitation and propose a workaround (= a way to write code that is compatible with the problem) that is most often more efficient than the way the "customer" was considering.
    There are no problem, just solutions 
    Message Edité par chilly charly le 09-18-2008 08:47 AM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • Dynamic creation of component

    Hi ,
    I try to create a component in DC B from DC A.For this I use the method
    wdThis.wdGetObjectComponentUsage().createComponent(componentName, dc);
    where componentName = path of the webdynpro component
    eg:com.sap.a1s.reui.plugins.fdt.expressions.decisiontable.ExDecisionTable
    dc=<vendor name>/<dc name>
    sap.com/a1s/reui/plugins/fdtexpr
    But I keep getting the runtime error
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'sap.com/a1s/reui/plugins/fdtexpr' since it is not a Web Dynpro object
    I also tried using
    sap.com/a1s~reui/plugins/fdtexpr
    But get the same error.
    can anyone please help regarding how to get the DC name ?
    Regards
    Sourav

    hi Saurav,
    I think problem is web dynpro framework is not getting deployable object,
    just give try to,
    sap.com/a1s~fdtexpr
    not sure but just a try, also check if this link is of any help
    View Methods / Dynamic component creation
    regards
    Message was edited by:
            Abhijeet

Maybe you are looking for

  • ITunes update corrupted some of my music files so iTunes can't find the file, nor music I  bought from the iTunes store.

    After an iTunes generated update of iTunes, some of my music can't be accesed any more. When I try to play the file, iTunes says it can't find the link. This also happens with music I purchase from the iTunes store, so I've lost all this music; do I

  • My iPod 5th generation will NOT sync and I've tried everything.

    My iPod has done this before in the past but it seemed to fix itself after awhile and I had all my music again, now - nothing. I've made sure the 'Sync Music' button was clicked, tried it unclicked, tried to manually sync, click every box on the side

  • Calling stored proc from java to return ref cursor

    Hi All, We have a requirement to display all the records from a table on a JAVA screen. Due to some constraints, we have to write the query in the stored proc. We are trying to return a result set from the stored proc to the java code by using a ref

  • HOW LONG TO BURN BLU RAY VIA COMPRESSOR 3.5?

    Does anybody know the ballpaerk figure as to how long a 115 minute FCP 7 project exported to self contained movie and brought into Compressor 3.5 to burn a blu ray disk on an external blu ray writer will take? Is Roxio Toast any faster? Thanks much f

  • RFUMSV00 - tax report - add columns numbers

    Hello Is it possible to add for every column in RFUMSV00 (transaction S_ALR_87012357) a sequential number (which will correspond to numbers in legaslation vat report) ? Something like this: 1               2         3       4 Invoice nr.   Customer