Dynamic creation of folder in KM content

Hi All,
I've created a webdynpro application which creates a folder in KM Content->Discussion groups dynamically once the application loads.
I've created a iview of this application and users can access this application through the url of the iview
But the issue is that the users are not able to execute this application.I've following queries:
1) Is there any particular role that should be assigned to the user to execute this application
2) If yes, for the above question can we assign the role to the user only when the application is getting executed and then remove it.
I'll be grateful if anybody can help me out in this.
Thanks and Regards,
Pradeep

Thanks for the quick response.
I set the permission for discussiongroups as "read only".
I observed that the users having 'Content Admin' role are able to execute the application and the folder is getting created in KM content.
But the users not having content admin role are not able to execute the application and they get error as "500-Internal Server Error. Failed to process request.Please contact your system administrator"
Can you please clarify on this.Is it anything to do with the role
Reagrds,
Pradeep

Similar Messages

Dynamic Creation of UI in adobe forms??

Hi Experts,
I need to create a dynamic interactive form and dynamic UI elements in the interactive form.
As per my requirement I need to display a pdf and I will be getting values from the RFC's. I need to show the form segments and the UI elements only when there's a data from the RFC else not. I am unable to understand whether this requirement needs generation of the UI elements dynamically or I can do it statically as well.
The form thus generated will be having data from the RFC which based on the data quantity may exceed to n number of pages.
In case it needs dynamic creation can you suggest me please how to achive it in interactive forms?
Helpful answers will be appreciated.
Warm Regards,
Gaurav

Hi,
subForm1:-
Flow content
Allow page breaks
Place: following previous-----> This means when you are repeating the subform the previous one should be followed.
Say you have a table and have 3 columns in it.
After 1st column is completed, the next column should come with 1st comun
After: Continue filling parent--->Continously fill the data with the parent element
Repeat sub form min count is 1 : Minimum of 1 line item will be printed
Height: Expand to fit is true.: If the field height is increased it automatically expands.
For help in Adobe Press F1 or Goto Help--> Adobe Designer Help in Adobe Designer
After installing Adobe Designer, goto the specific folder
C:\Program Files\Adobe\Designer 8.0\EN you can get sample documents.
For help press F1 after opening designer.
Sub Form1: Content--> Flowed, Flow direction --> Top to bottom
Binding --> Check the checkbox Repeat Subform for each data item
Subform 2: Content --> Positioned, No pagination No binding settings changes needed.
Hey i forgot to mention the Header Subform where you create all these subforms should be flowed.
Try it once like this and lte us know
Edited by: Sankar Narayana on Oct 3, 2008 5:06 PM

Creation of Folder

Hi Experts,
Can anyone tell abt the creation of new folder in portal content..i have right click in portal content folder...but no use...default menu (open, open in new window.....) is coming... if there is any pre-requesitie for that menu.. (new folder....)
waiting for reply..
Thanks and regards
sarasa

Hi,
See this for supported browsers and Operating System Version:
<a href="https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200314690900000192&00200682500000003818=WBRPFM&00200682500000003853=Enterprise Portal">NW2004 supported browsers</a>
https://forums.sdn.sap.com/thread.jspa?threadID=311612
Greetings,
Praveen Gudapati

Moving a folder, Linking between content areas

I have 2 problems:
1) So far we developed all our content in a single content area. We would now like to split the information into multiple content areas. The MOVE or COPY command on the folder only allows me to copy within a content area. I have hundreds of documents to move. Is there any way i can move a folder to a different content area?
2) What is the best way to link a folder from 1 content area to a folder in another content area? I found that the FOLDER LINK ITEM allows me to connect only within a content area.
(I would prefer not to use an URL since the content publishers may not be able to construct complicated paths or the paths may change leading to broken links.)

Suraj
1) The only way to do this currently is to create an export of the content area, import it back into the portal and remove the duplicate content. We are planning a bulk action feature in a future release that would allow you do to selectively copy/move one or more folders into a new content area.
2) Currently folder links are scoped within a content area; the only option is to link to the folder through a URL folder type. If you use the generated URL that contains the folder ID, you shouldn't run into any problems if the target folder is moved. I have submitted an enhancement request to extend the folder link to 'remote' folders outside of the 'home' content area.

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

Creation of folder/"SAVE AS "option

Dear all / baneka raj
1) I want to give a authorization for creation of folder to HOD only in easy DMS .
Please le me know the detail procedure. Its burning issue to me .
2) "SAVE AS "( Kindly refer my last thread/Deactivate this SAVE AS option) option as per baneka raj it is possible through funtion "F_EXPORT"
   How can i activate this function in SAP
Let me know t-code or procedure
Thx in advance
Edited by: Harish Parab on Aug 1, 2009 2:30 PM
Edited by: Harish Parab on Aug 1, 2009 2:31 PM

hi,
for, ? 1.
u2018ACO_SUPERu2019 is the only PFCG object for working with ACLs in SAP Easy Document Management.
PFCG roles (objects) and ACLs are independent of each other. If both PFCG objects and ACLs are maintained, the system takes both of them into account, but PFCG roles are given preference.
To be able to use object-related authorizations (ACLs) in SAP Easy Document Management, you have to carry out the following steps:
1.      Create a PFCG role or use an existing one
The PFCG role ensures access to document management. The system first checks the PFCG roles of a user. If the user has authorization for document management, the system carries out the check for ACLs.
2.      Assign user to role
3.      In SAP Easy Document Management you define the administrator authorizations for a folder or document under SAP Properties on the Authorizations tab page with Create Admin Authorization. These authorizations allow the user to edit documents and folders and assign authorizations to other users, user groups, and roles.
4.      You define authorizations for other users, user groups, roles, and HR objects in SAP Easy Document Managementunder SAP Properties on the Authorizations tab page for a folder or document, by choosing
for Q2, u can edit original program and make it deactive that field. not recomended. ask Abaper.
Benakaraj
??P

Creation of folder and subfolder in library through web service

Hi,
Facing an issue in creating folder in library through SOAP service.
I'm sending a request to sharepoint site for creation of folder.The folder gets created in sharepoint but service returs error as "Error id=2, failed"
And when i'm trying to create subfolder under the above folder service throws an exception saying "FolderNotFound"
The same service is working on other env.
Kindly suggest on this. Thanks in advance.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi Sudheer,
Please check the code in the below blog
http://ronaldlemmen.blogspot.in/2010/04/create-folder-in-sharepoint-using-web.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Dynamic creation of TabStrip

Hi,
I want to create a tabstrip dynamically.The tabstrip should have 3 tabs, and in each of the tabs i want to put some UI elements like a label, input field, dropdown, tables.........etc.
Im able to create the tabstrip and add tabs to it dynamically.
I've even created the UI elements which i wanted to put in the tabs.............But im not able to proceed as i dont know how to add the UI elements to the tabs.......
Can anyone tell me how to add UI elements to a tab in a tabstrip?
Regards,
Padmalatha.K
Points will be rewarded.

Hi,
Following code will help you to understand the dynamic creation and adding them
//Tabstrip
       IWDTabStrip tabStrip = view.createElement(IWDTabStrip.class);
       //Tab
       IWDTab tab = view.createElement(IWDTab.class);
       //Input Field
       IWDInputField inputField = view.createElement(IWDInputField.class);
       //Adding inputfield to tab
       tab.setContent(inputField);
       //Adding tab to tabstrip
       tabStrip.addTab(tab);
//Finally add this tabstip to either your root container or some other container.
Regards
Ayyapparaj

Dynamic creation of ComponentUsage

Hi people,
I want to reuse a view (ViewA) in different views (ViewB, ViewC, ViewD).ViewA has a quite complex logic, so it is necessary to outsource this view. Not only the logic, but also the count of UIElements and contextelements is quite large, for this I don't want to implement this part redundant in the views A, C and D.
I have to use ViewA in a table in the TablePopin UIElement. Every line of the table should have its own instance of ViewA. Is that possible?
My idea is it, to put the view in an own component. For every tableline I need an instance of the componentUsage. My problem is now, that I'm not able to create at runtime a ComponentUsage and at designtime I don't know how many instances I need. Is it possible in webdynpro to create dynamic instances of ComponentUsage?
If you know an other way, that prevents me from implementing the view and its logic more times, please tell me!
Thanks in advance,
Thomas Morandell

Hi Thomas,
just for clarification. Principally it is possible in Web Dynpro to dynamically create new component usages of the same type like an existing, statically declared one. This means after having defined a component usage of type ISomeComp (component interface definition) you can dynamically create new component usages which all point to the same component interface definition ISomeComp:
wdThis.wdGetISomeCompUsage().createComponentUsageOfSameType();
But this dynamic creation approach implies, that you must also embed the component interface view of this component usage to the view composition dynamically; and this is (unfortunately) quite cumbersome and complicated based on the existing Web Dynpro Java API (it is not yet optimized for a simple dynamic view composition modification.
Additionally, like Valery pointed out, the dynamic creation of new component usages is not compatible with table popins.
Regards, Bertram

Dynamic creation of date in selection variant

Hi All,
I have a Z program for updating a field in BOM item. One of the input field in the report is "Valid From Date". Actually the current date is automatically fetched through a function module and it is defaulted in that field.
Our client is using selection variant for ease of use. The problem here is old date in the selection variant is replacing the current date. I want current date to be created automatically during insertion of variant also. How can i solve this problem. Is there any selection variable inside the variant for dynamic creation of Date?
Thanks
Sankar

As I know there is no setting for this. For any std or Z report variant function with L should act same way...anyway you discuss with your ADABer.
See the help for variables
Selection Variables
The following three types of selection variables are currently
    supported:
o   Table variables from TVARV
        You should use these variables if you want to store static
        information. TVARV variables are proposed by default.
o   Dynamic date calculations:
        To use these variables, the corresponding selection field must have
        type 'D' (date). If the system has to convert from type T to type D
        when you select the selection variables, the VARIABLE NAME field is
        no longer ready for input. Instead, you can only set values using
        the input help.
        The system currently supports the following dynamic date
        calculations:
        Today's date
       From beginning of the month to today
       Today's date +/- x days
       First quarter ????
       Second quarter ????
       Third quarter ????
       Fourth quarter ????
       Today's date - xxx, today's date + yyy
       Previous month
o   User-specific variables
       Prerequisite: The selection field must have been defined in the
       program using the MEMORY ID pid addition. User-specific values,
       which can be created either from the selection screen or from the
       user maintenance transaction, are placed in the corresponding
       selection fields when the user runs the program.
The SELECTION OPTIONS button is only supported for date variables that
   fill select-options fields with single values.
i.e means we can do that with D also.

Is it possible to recover a deleted folder and its contents as opposed to an individual file?

When I turned on my computer today, a folder located on my desktop is no longer there. Astounded I could have accidentally deleted it, the folder having been trashed is the only illogical logical possibility I can think of - and is a first for me in my 30 years of Mac use. My father is in the process of dying and the folder contains all the information coming to me on the subject. The last backup of this folder is about a week old and much has been added since for which I've no record.
Not having a master document or table of contents listing what was in the folder leaving me unable to search for and recover individual files/documents by name, my question is this: Is it possible to recover a "FOLDER", and its contents after that folder has been moved from the desktop to the trash, the trash emptied, and the computer having been shut down?
If anyone has any ideas of how to recover anything about what items that folder contained, I'd really appreciate whatever thoughts you might have.
Thanks in advance -
The computer this folder is missing from is a early 2008 MacPro, running 10.7.5.

I'm not sure what you can do beyond trying to restrict the types of files you search for. These apps normally have ways to select the file types or to add example files. That allows them to carve out only those types, but you still may end up with GB's of data, especially if the types are somewhat generic. I don't know of any tools that can undo changes to the disk catalog over time.
I guess you could also search for specific text if you know that these files contained something that is 'almost unique'. Spotlight can do that, or grep, egrep are command line tools that may help ask if you want to go that route, they may help you gather lists to move files around to whittle them down.
Sorry I can't think of a way around this it's a difficult task at a difficult time. Good luck with it, ask if you think we could help.
I do wonder if Apples 'Versions' could help?
OS X Lion: About Auto Save and Versions - Apple Support
@Tony T1, do you know how to restore files from that system? I think it is part of Time Machine, but the copies are saved locally.
It is not entirely clear how it works (at least from my memory of Lion) with regards to how you could get files back in this situation. The database should be at the base of the disk in a hidden folder ".DocumentRevisions-V100", but I don't think you can just pull files out of there. Personally I'd consider making a full disk backup before you attempt to restore files. Then you could try the 'Enter Time Machine' UI to see if it can browse back to the older Desktop.

How to extract a folder (and its contents) from inside a zip file?

There is a zip file which contains a folder inside it. The folder itself contains a few files. I would need to know how to extract the folder (with its contents) from inside a zip file.
I have found a few unzipping code samples which show how to handle a folder inside a zip file. An example is shown below:
public static void extract(String workingDirectory, byte[] zipFile)
throws Exception {
ByteArrayInputStream byteStream = new ByteArrayInputStream(zipFile);
ByteArrayOutputStream out = new ByteArrayOutputStream();
ZipInputStream zipStream = new ZipInputStream(byteStream);
ZipEntry zipEntry = null;
String nameZipEntry = null;
byte[] contentZiphttp://forum.java.sun.com/post!default.jspa?forumID=31#
Click for code tagsEntry = null;
boolean isDirectory = false;
int indexFileSeparator = -1;
String directory = null;
String fileName = null;
while ( (zipEntry = zipStream.getNextEntry()) != null )
            nameZipEntry = workingDirectory + File.separator + zipEntry.getName();
            isDirectory = zipEntry.isDirectory();
            if (isDirectory) {
File file = new File(nameZipEntry);
file.mkdirs();
            else
                // read zipEntry
                byte[] buf = new byte[1024];
                int c = 0;
                while ( (c = zipStream.read(buf)) != -1)
                    out.write(buf, 0, c);
                indexFileSeparator = nameZipEntry.lastIndexOf(File.separator);
                directory = nameZipEntry.substring(0, indexFileSeparator);
                fileName = nameZipEntry.substring(indexFileSeparator+1,nameZipEntry.length());
                FileSystemTools.createFile(directory, fileName, out);
                out.reset();
                zipStream.closeEntry();
        zipStream.close();
        byteStream.close();
}The code sample which deals with the part where the zipEntry is a directory creates a directory with the same path and name. (highlighted in bold)
Another similar variation is:
File file = new File(dirDestiny.getAbsolutePath() + File.separator + zipEntry.getName() );
if(zipEntry.isDirectory())
      file.mkdirs();When the code creates a directory for the folder, does it unzip the contents inside the folder as well?
If not, how do I extract the files inside the folder?

Have you already tried to see if the sample code you downloaded works or not? Maybe if you try out the code yourself you can see if it extracts files from a directory within a zip file?
I like to use pkzip. It is a command line compression/uncompression tool that can be used from a batch file. If you assignment involves unzipping large amount of zip files on a regular basis, I recommend taking a look at pkzip.

How to add folder from KM content to Portal Favorites for selected users

Hi all,
I have cretaed a folder in KM content (In documents) for uploading implementation related ddocuments.
how to add this folder in "Portal Favorites" of selected users only.
Please guide.
Thanks in advance.

Hi,
well one way could be the following.
Go into KM-Content --> Repository "userhome" --> select the user you want --> navigate into his folder Favorites --> create a new internal link in this folder to the folder you want
In the favorites of the user there is now a link to the desired folder and after clicking a new window will be opened. You can copy this internal link to the favorites folder of the other users you want.
Regards
Alex
Edited by: Alexander Götz on Apr 16, 2009 5:12 PM

New Lightroom catalog always selects and includes some files from folder Applications/Mail/Contents/Resources. Why? Mac Mini OS X 10.10.1. Lightroom 5.7

Whenever I create a new catalog, Lightroom selects and includes some, but not all, TIFF files from the folder Applications/Mail/Contents/Resources. Why does it do this: I don't select this folder to be included. Mac mini OS X 10.10.1. Lightroom 5.7.
Help much appreciated.
Regards
Dan O'Neill

Whenever I create a new catalog, Lightroom selects and includes some, but not all, TIFF files from the folder Applications/Mail/Contents/Resources. Why does it do this: I don't select this folder to be included. Mac mini OS X 10.10.1. Lightroom 5.7.
Help much appreciated.
Regards
Dan O'Neill

Help me Friends - How to Delete a Folder and its contents in java

Hi Friends
I want to delete a folder and its contents by passing the folderpath.
Can any one help me in this..
Thanks in Advance
Regards
Krishna

* Delete a directory including all of its content.
* @param directory Directory path to delete.
public static void deleteDirectory(String directory) {
if (directory != null) {
File file = new File(directory);
if (file.exists() && file.isDirectory()) {
//1. delete content of directory:
File[] files = file.listFiles();
int count = files.length;
for (int i = 0; i < count; i++) { //for each file:
File f = files;
if (f.isFile()) {
f.delete();
} else if (f.isDirectory()) {
deleteDirectory(f.getAbsolutePath());
}//next file
file.delete(); //finally delete (empty) input directory
}//else: input directory does not exist or is not a directory
}//else: no input value
}//deleteDirectory()

Dynamic creation of folder in KM content

Similar Messages

Maybe you are looking for