Dynamic CRM connect outlook Client with different domain

Hi Guys,
I had installed CRM 2011 in cloud with different domain.
If I use browser is working fine just that when i use Outlook client it show
15:24:16| Error| Exception : The request for security token could not be satisfied because authentication failed. at System.ServiceModel.Security.SecurityUtils.ThrowIfNegotiationFault(Message message, EndpointAddress target)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.GetNextOutgoingMessageBody(Message incomingMessage, SspiNegotiationTokenProviderState sspiState)
I found that is because you must connect to the same domain.
any idea that i can use my Outlook client to connect to CRM 2011 without changing my domain?
Regards,
Kim

Yes - I've been scarred with this for many years :(
If it is just CAS 1 that is causing issues, then focus in on that. The support statement for Win 2008 R2 is that NLB is still a 3rd party component and support may ask for it to be disabled.
http://support.microsoft.com/kb/278431
Does CAS1 and CAS2 have the same NICs (firmware as well), driver, teaming software, and teaming config?
I also want to ask what the network team did for configuring the switch ports on the servers? This will vary from vendor to vendor - did they do the same config on both?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Thanks Rhoderick, issue still persists
can you also help clarify what you meant by "configuring the switch ports on the servers"?
thanks again

Similar Messages

CRM 2011 outlook client with Outlook 2013

Hello,
I have a user that keeps getting a message saying "This operation is not supported until the entire message is downloaded. Download the message and try again" This happens when he tries to attach a document in SharePoint through mail merge.
I have tried the rollup updates, uninstall/reinstall and gave him a reloaded Surface Pro running 8.1 but the problem persists sporadically.

The error meas that you currently only have downloaded the message header. Check your send/receive settings to make sure you always directly download full items.
Send/Recieve > Send/Receive Groups > Define Send/Receive Groups > select the certain group name and click "Edit" > check the "download complete item" options is setting ok
If so, wait for the message to be downloaded completely and then retry that.
Tony Chen
TechNet Community Support

App-V CRM 2013 Outlook Client and Office 2013 Click to Run

Hi,
I'm trying to get going with enbing the CRM 2013 for Outlook client with the VL version of Office Pro Plus 2013. I have successfully published and use Office App-V package in a test environment. App-V version 5.0 SP2 is installed on the client
PC (Windows 7 64bit). SCCM 2012 R2 is used to publish APP-V applications to user groups.
I have sequenced the CRM 2013 Outlook client (offline mode disabled) with UR2 and published it using SCCM as a "Add-on or Plug-in. I've also created a connection group so that the App-V version of Office 2013 is able to connect to the sequenced
CRM client. The client installs successfully, but the CRM tab doesn't appear in the Outlook Ribbon, and the Configuration Wizard crashes each time it is launched. The App-V event log is blank (which I'm taking to be a good sign). All CRM
client prerequisites have been preinstalled on the target PC.
I'm thinking that the CRM client can't see the Outlook application and therefore crashes and doesn't integrate with the Outlook application. Problem Signature 09 (from the crash explanation) states "System.NullReference Exception".
I can't seem to find much out there for sequencing the 2013 version of the client. Has any else managed this yet or have any ideas where I'm going wrong?
Thanks,
Tim

Hello,
I would use Process Monitor to understand what happens and to see why Outlook isn't seeing the plugin, and why the wizard is crashing
Nicke Källén | The Knack| Twitter:
@Znackattack

Can't download attachments using the MS CRM 2011 Outlook client

Hello,
I am trying to Open/Save Attachment (from Notes in Meeting Entity) in MS CRM 2011 for Outlook Client. Once I click on attachement nothing happen.
Both CRM Server (On-Premise) and Outlook client are UR13. Its ADFS deployment.
I've tried solution here:
https://social.microsoft.com/Forums/en-US/fc222e9a-f426-4c1b-adaa-84c0923576f4/cant-download-attachments-using-the-ms-crm-2013-outlook-client?forum=crm
But didn't helped.
From log files I can't get any answer:
I can download file using direct link in web browser. Also there isn't problem when downloading from CRM web app.
[2015-03-19 16:20:11.788] Process:Microsoft.Crm.Application.Outlook.WebFormsHost |Organization:00000000-0000-0000-0000-000000000000 |Thread: 1 |Category: Shared |User: 00000000-0000-0000-0000-000000000000 |Level: Verbose |ReqId: | ExceptionFilter.TryFilterAllCatch ilOffset = 0xF
at ExceptionFilter.TryFilterAllCatch(Action body, Action`1 filter) ilOffset = 0xF
at WebBrowserForm.BeforeNavigate(Object sender, DWebBrowserEvents2_BeforeNavigate2Event e) ilOffset = 0x50
at AxWebBrowser.RaiseOnBeforeNavigate2(Object sender, DWebBrowserEvents2_BeforeNavigate2Event eventArgs) ilOffset = 0x15
at AxWebBrowserEventMulticaster.BeforeNavigate2(Object pDisp, Object& uRL, Object& flags, Object& targetFrameName, Object& postData, Object& headers, Boolean& cancel) ilOffset = 0x29
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x17
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0x89
at UnsafeNativeMethods.DispatchMessageW(MSG& msg) ilOffset = 0xFFFFFFFF
at ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData) ilOffset = 0x235
at ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) ilOffset = 0x1DE
at ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) ilOffset = 0x13
at Application.Run(Form mainForm) ilOffset = 0x11
at Program.Main(String[] args) ilOffset = 0xF0
>Before Navigation for Site https://crm11.test.cz/PCSTEST/Activities/Attachment/download.aspx?AttachmentType=5&AttachmentId={1CFBD641-0BC7-E411-AC5E-005056A10023}&IsNotesTabAttachment=1 Resetting timer

Thx for response Daniel.
Attachements are stored directly in CRM DB (in Annotation table).
I have also tried fiddler. And it looks response was OK (200). I think its problem with CRM for outlook client.

Is possible to site mailbox email address with different domains in sharepoint online - office 365

Can I set site mailbox email address with different domains in sharepoint online - office 365?
For eg I have two dns link with office 365 account - abc.com, xyz.com
So can i set site mailbox email according using powershell like follwoing
New-SiteMailbox –DisplayName "test" -Name "[email protected]" –SharePointUrl $NewlyCreatedsiteurl
New-SiteMailbox –DisplayName "test" -Name "[email protected]" –SharePointUrl $NewlyCreatedsiteurl

Hi Biraj,
From your description, you would like site mailbox to have two email address.
Since the issue is related to SharePoint online and Exchange online, I'd recommend you contact online support engineer for sufficient resource and more assistance. For your convenience:
http://community.office365.com/en-us/f/154.aspx
In addition, I find some information that might be relevant for your reference:
Quotes from
https://support.office.com/en-sg/article/Prepare-for-using-site-mailboxes-in-Office-365-6381daa5-3d98-4629-972d-d19e1dc48c1b
Can I rename a site mailbox?
The display name of a site mailbox is the SharePoint team site display name. If you change the display name of the site in SharePoint, the display name also changes in Outlook. However, the site email address won’t be changed.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Buttons not working in CRM 2015 Outlook client

I have this strange problem where no user in an organisation (even administrators) can't click the new Account, Contact or Lead buttons in the CRM Outlook client. The button is visible and enabled but nothing happens when clicked. The CRM Activity button
is working. Any suggestions to why this is and what can be done about it? Thank you.

Can you check this and revert
https://community.dynamics.com/crm/b/dynamicscrmsupportblog/archive/2012/12/05/crm-for-outlook-client-add-in-disabled.aspx
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

CRM 2015 outlook client does not connect to CRM

Hi,
I am trying to run the configuration wizard to connect the office 2010 outlook to Dynamics CRM 2015 server and get the error below (outlook client 2015 is successfully installed). All the required components
are installed on both server and client side.
Any idea?
captainsina

Hi Nico,
How is it going? :)
I am going against on-prem. Not being prompted for credentials. I can go to the services using the browser, but the outlook client fails.
I am using the same credentials on the local machine as the CRM user credentials.
Cheers.
captainsina

Outlook client in different subnet unable to connect to Exchange 2010 CAS using Windows 2008 R2 NLB multicast mode

Hi all,
need urgent assistance on the following issue
this is my Exchange 2010 setup
2 x CAS/Hub servers with HP network teaming, and load balanced using Windows NLB multicast mode. There are 2 VIPs on the NLB, one for outlook anywhere, one for autodiscover
2 DNS records were created for the 2 VIPs
Clients use Outlook Anywhere (HTTPS) to connect to the CAS servers from external segment via a Palo Alto firewall, which also acts as a layer 3 router
static arp was set on the Palo Alto firewall, with both virtual MACs pointing to the primary virtual MAC used by the NLB.
Observations
1. within same segment - no issue accessing Exchange servers, even when one CAS node is offline
2. external segment (via firewall)
a. when both nodes are up
outlook client able to connect to Exchange CAS VIP on 443, but will disconnect after around 30 seconds. Client will retry and the pattern will repeat
Exchange CAS RPC logs shows client connections and disconnections to the outlook anywhere VIP address
Firewall logs shows allowed traffic from client to the VIPs
unable to complete profile creation
b. with only CAS2 (CAS1 stopped/deleted from NLB cluster)
no issues accessing Exchange servers, creating profiles etc
c. with only CAS1
same behaviour as (a)
reinstalled NLB, but doesn't resolve
deleted CAS1 from NLB cluster, and re-add. issue remain
Q1. is teaming supported? Teaming is currently set to automatic mode, instead of specified Fault Tolerant
Q2. are there additional settings we need to set or verify on the Palo Alto firewall, since the issue only happen to external segment? Thanks!

Yes - I've been scarred with this for many years :(
If it is just CAS 1 that is causing issues, then focus in on that. The support statement for Win 2008 R2 is that NLB is still a 3rd party component and support may ask for it to be disabled.
http://support.microsoft.com/kb/278431
Does CAS1 and CAS2 have the same NICs (firmware as well), driver, teaming software, and teaming config?
I also want to ask what the network team did for configuring the switch ports on the servers? This will vary from vendor to vendor - did they do the same config on both?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Thanks Rhoderick, issue still persists
can you also help clarify what you meant by "configuring the switch ports on the servers"?
thanks again

CRM 2013 Outlook client error

Hi
We have a test install of CRM 2013 which is working correctly on the server. Logon via the web is ok.
A user was setup to access through the outlook client in office13 running on a win7 platform which also worked correctly. The same user also has secondary access through the outlook client in office 13 running on a win8.1 platform. This never worked correctly
and would show credential errors.
Recently the win7 platform has also disconnected and shows connection errors.
I have tried the following on the win 7 platform:
1. Uninstall the client and reinstall from scratch - unsuccessful
2. Run through the steps in the built in trouble shooter - unsuccessful
Logon using the same creds via the web on the same machine is ok!
What are the next steps to rectify this problem?
Thanks in advance!

Hi Melon,
here is the full error message and a copy of the log file is given below.
17:50:49|   Info| === Microsoft Dynamics CRM for Outlook Configuration Wizard logging started: 24/03/2014 5:50:48 PM ===
17:50:49|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ClientConfig.Initialize
17:50:49|   Info| Client Configuration Wizard Version      : 6.0.0001.0061
17:50:49|   Info| Client Configuration Wizard LanguageID   : 1033
17:50:49|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.Validator.IsOutlookInitialized
17:50:49|   Info| Query all rows in profile table
17:50:49|   Info| Outlook is initialized
17:50:49|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.Validator.IsOutlookInitialized
17:50:49|   Info| Client Configuration Wizard Running Mode : Normal
17:50:52|   Info| Configuration file Type : OnPremise.
17:50:52|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ConfigInfo.ConfigInfo
17:50:52|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.OutlookCRMDatastoreInstaller.GetAllCRMOrgsInOutlookProfile
17:50:52|   Info| Logon mapi store
17:50:52|   Info| Logon admin service
17:50:52|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.OutlookCRMDatastoreInstaller.GetServiceIds
17:50:52|   Info| Query all rows in msg service table
17:50:52|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.OutlookCRMDatastoreInstaller.GetServiceIds
17:50:52|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ConfigInfo.CleanUpDatastoreIfNeeded
17:50:52|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ConfigInfo.CleanUpDatastoreIfNeeded
17:50:52|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ConfigInfo.ConfigInfo
17:50:52|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm.ServerForm
17:50:54|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.ServerForm
17:50:54|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm.SetUIData
17:50:54|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.LoadAvailableUrls
17:50:55|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.LoadAvailableUrls
17:50:55|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.SetUIData
17:51:03|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm._testConnectionButton_Click
17:51:03|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm.TestConnection
17:51:03|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.TestConnection
17:51:03|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm._testConnectionButton_Click
17:51:30|   Info| Fill organization comboBox with server information.
17:51:35|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm._testConnectionButton_Click
17:51:35|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm.TestConnection
17:51:35|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.TestConnection
17:51:35|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm._testConnectionButton_Click
17:51:36|   Info| Fill organization comboBox with server information.
17:51:37|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm._okButton_Click
17:51:37|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm._okButton_Click
17:51:40| Error| Exception : Metadata contains a reference that cannot be resolved: 'https://ldp-crm-01:80/LDP/XRMServices/2011/Organization.svc?wsdl'.    at System.ServiceModel.Description.MetadataExchangeClient.MetadataRetriever.Retrieve(TimeoutHelper
timeoutHelper)
   at System.ServiceModel.Description.MetadataExchangeClient.ResolveNext(ResolveCallState resolveCallState)
   at System.ServiceModel.Description.MetadataExchangeClient.GetMetadata(MetadataRetriever retriever)
   at System.ServiceModel.Description.MetadataExchangeClient.GetMetadata(Uri address, MetadataExchangeClientMode mode)
   at Microsoft.Xrm.Sdk.Client.ServiceMetadataUtility.RetrieveServiceEndpointMetadata(Type contractType, Uri serviceUri, Boolean checkForSecondary)
   at Microsoft.Xrm.Sdk.Client.ServiceConfiguration`1..ctor(Uri serviceUri, Boolean checkForSecondary)
   at Microsoft.Xrm.Sdk.Client.OrganizationServiceConfiguration..ctor(Uri serviceUri)
   at Microsoft.Xrm.Sdk.Client.ServiceConfigurationFactory.CreateConfiguration[TService](Uri serviceUri)
   at Microsoft.Crm.Outlook.ClientAuth.ClientAuthProvidersFactory`1.GetAuthProvider(Uri endPoint, Credential credentials, AuthUIMode uiMode, Uri webEndPoint, IClientOrganizationContext context, Form parentWindow)
   at Microsoft.Crm.Application.Outlook.Config.ServerInfo.LoadUserId()
   at Microsoft.Crm.Application.Outlook.Config.ServerInfo.Initialize(Uri discoveryUri, OrganizationDetail selectedOrg, String displayName, Boolean isPrimary)
   at Microsoft.Crm.Application.Outlook.Config.ServerForm.LoadDataToServerInfo()
   at Microsoft.Crm.Application.Outlook.Config.ServerForm.<InitializeBackgroundWorkers>b__2(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
17:51:40| Error| Exception : The underlying connection was closed: An unexpected error occurred on a send.    at System.Net.HttpWebRequest.GetResponse()
   at System.ServiceModel.Description.MetadataExchangeClient.MetadataLocationRetriever.DownloadMetadata(TimeoutHelper timeoutHelper)
   at System.ServiceModel.Description.MetadataExchangeClient.MetadataRetriever.Retrieve(TimeoutHelper timeoutHelper)
Look forward to hearing from you,
Thanks

Getting unknown error 0x8004011c. when trying to set up email account in Outlook 2013 with a Domain

Hi all
The title basically states the problem - Outlook 2013 wont set up with a Domain. This only seems to affect Windows 8.1 pro, Win 7 Pro has no problems. If I log on to the computer itself (not the domain) Outlook runs no problem
If anyone has any ideas I would be most grateful
Thank you
Fionnbarr

Hi Fionnbarr,
When you say "...with a Domain", do you mean login to the computer with a domain user account?
Does this happen on all your Windows 8.1 clients? What's the error message in full? At which exact step will you get this error?
So you have observed that "This only seems to affect Windows 8.1 pro", it could be an issue with this specific system. I would suggest we first check for Windows updates and install any available ones, then try again.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Integrating Wordpress into Muse need dynamic height based on content with cross domain

Since Muse doesn't currently support Blogs and Wordpress integration I have decided to use an iFrame.
My goal is to have the height of the iframe dynamically change based on the content in my Wordpress blog. I understand this is a common issue with frames that are hosted on different domains.
I am running into having to over compensate with a bunch of deadspace to allow enough room. Alternatively I get the horrible looking scroll bar.
I have tried using cross site scripting, JQuery and postMessage but am having trouble figuring out how to put the proper code into Muse and Wordpress for them to communicate back and forth.
Please, any help on this matter would be greatly appreciated.

Abhishek,
Thanks for your reply, however, it is not working with Muse. I added the Javascript to the head section and adjusted iframe and it displays as a small square in the upper left hand corner, unable to view the whole page.
Inserted into head section --
<script type="text/javascript">
function resizeIframe(obj)
obj.style.height = 0;
obj.style.height = obj.contentWindow.document.body.scrollHeight + 'px';
</script>
inserted as an html object --
<iframe name="MycoSmooth" src="http://www.mycosmooth.com" frameborder="0" scrolling="no" id="iframe" onload='javascript:resizeIframe(this);' />
Below is the result:
The purpose is to have an independent website run the blogging capabilities, since muse doesn't directly support blogging as of yet.
Since the site is on a different domain, I am running into cross domain issues and it won't get the height of the page. The methods that apparently work use php and I am unsure how that would work in muse, if at all.

Windows 10 and Dynamics CRM 2013 Outlook Client - Identity Foundation missing

How can I install/activate the Identity Foundation in Windows 10.
In Control Panel\All Control Panel Items\Programs and Features the feature is missing.
Dynamics CRM 2013 (and 2011) Outlook Client does need the Identity Foundation:
Error is "Could not load file or assembly 'Microsoft.Identity.Model, Version=3.5.0.0 ...
icomedias Austria - Germany

I've had the same problem with the CRM 2011 Plug-in.. It is not possible to install the Windows Identity Framework onto Windows 10 since it was not included as an option in the "Features" menu.
Also - I found this forum entry discussing that exact problem (with no answer, so far):
Windows Identity Foundation not working with Technical Preview
EDIT: Fixed link. Inside of the linked discussion thread, I see this:
"From Windows 8.1 Features Screen:
WIF 3.5 has been superseded by WIF classes that are provided as part of .NET 4.5. It is recommended that you use .NET 4.5 for supporting claims-based identity in your applications.
so i guess they removed it completely in Windows TP"

CRM 2011 Outlook Client not showing all columns in Opportunity Views

Versions:
CRM: 2011 On-Premise - 5.0.9688.1533
Outlook: 2010 Professional - 14.0.6122.5000 32bit
CRM Client for Outlook: 5.0.9690.1992
Basic Problem
The Outlook Client views that show up in Opportunities do not have all the columns that are in the view.
Some of the views do, but not all of them.
Example:
View Name: Won Opportunities
Columns in view: Created on, Location, Quote Type, Scope of Work, Quote Number, Booked Sale Date.....8 other
columns (many custom columns)
Columns in View in Outlook: Icon, Quote Number, Categories, Flag....thats all.
Other Notes
This only happens in the Opportunity section of the Outlook Client.
This does not happen in advanced find in Outlook or anywhere in the web client. This does not happen for any other entity.
This happens on all of our users Outlook clients.
I have tried recreating the view.
No error messages are recording in any logs that I can find.
Any ideas on why this is happening or how to fix it?
Thank you
Paul

1. Are you sure this is a System View and not a User Defined View? Can you take a screenshot of all the availalbe Outlook views when you click on the little down arrow to add a new view? Yes. See the screen shot at the bottom. It is a public
view.
2. What happens when you close the view and add it back? same results.
3. What happens when you restart Outlook? I ask because if you customized your System Views, those are only persistent for a given session. If your restart Outlook, then it should reset the View. we have tried that. and uninstalled Outlook client
and reinstalled. And uninstalled Outlook and reinstalled. Same results. The only view that works for opportunities is the Default Custom View. The strange thing is that the filters are working just fine. just not the columns.
4. A workaround - have you tried creating a new System View similar to the one you want? Yes. same results

Can't connect outlook 2013 with Office 365 (Eventid 36888)

We got a newly installed computer (windows 8.1) joined in a windows 2008 R2 domain. Most of the clients don't have issues with connecting to office 365. But
this one has problems.
1. When I try to connect to office 365, outlook prompts me the following:
- An encrypted connection to your mail server is not available ... (try unencrypted ...)
2. When I have a look to the eventvwr I see the following error:
- Source: Schannel
- Event ID: 36888
- User: System
- Message: The following fatal alert was generated: 10. The internal error state is 10. This concerning TLS-protocol.
- Details: ProcessID: 564
3. When I have a look to ProcessID 564 who generates the problem I see lsass.exe.
I performed already the following thing:
- Outside the domain there is no problem
- Reinstalled office doesn't help
- Configure outlook for office 365 doesn't help
- Checked the server and removed all gpo's, scripts for that user, ...
- The user is local Admin
Can you please assist me with this ?
Regards,
Steven

Hi Steven,
Please check whether the user can access the mailbox in OWA. If the problematic user can access mailbox from OWA, we can try to create a new Outlook profile to connect to Office 365. Please make sure the setting of "Encrypt data between Microsoft Outlook
and Microsoft Exchange" is checked in Account Settings.
If it doesn't work, please check whether the account can be configured in another computer.
Thanks,
Winnie Liang
TechNet Community Support

Java webservice client with windows domain authentication

I'm writing (well attempting to) a Java web service client using netbeans that consumes a web service written in C#, that uses NTLM authentication.
If I consume the webservice from a .NET client, authentication isn't a problem; I can just pass the crediantails in on an engine object.
eg engine.Credentials = System.Net.CredentialCache.DefaultCredentials.
Upon consuming this webservice in java the Credentials method doesn't appear on the engine object like it doesn't with it's C# counterpart.
I assume that Java goes about a different way of doing windows domain authentication?
Cheers

for what ever reason it just seemed to start working.

Dynamic CRM connect outlook Client with different domain

Similar Messages

Maybe you are looking for