Dynamic data in chart with a click on a column

Hi,
I have a tabular report with few columns in it.I also have a chat at the bottom of the table.
The table and the chart has the same data.
Is there anyway that I click on the specific column in the table and that data appears on the chart?
For Ex: If the table have columns like A B C D E F
If I click on "C" column can I get C's data in the chart. Is it possible?

hi Deepravs,
you can do that using Report Part Linking from the cross-tab / table and drilling into a group level below.
publish the attached sample report to your businesobjects enterprise system and also read your online help on report part linking. this type of linking only works in the boe viewer (not in crystal reports designer) as it is report part linking.
jamie

Similar Messages

Can we see dynamic data on charts using Excel Services

hi all,
i would like to know if there is any option in SharePoint 2013 for developing dynamic "responsive/interactive Charts" with SQL server as data source. And the connection should be there online, i mean the charts should refresh data based on
the SQL data all the time.
When i saw the feature of excel service, i could see only retrieving of data using data connection from sql and after adding that data to workbook, we can create responsive charts with required filters. However, i dint see option of data refresh from external
source without opening the excel work book.
What i want is, once i added the chart using chart webpart, if any new data is added or modified in external data source i.e., like SQL in my case, the chart should automatically updated with new changes in the data.
please let me know if my requirement can be fulfilled using OOB.
thank you beforehand .
Thanks & Regards Raj

Hi ALL,
Linda, I know you are only trying to help but when you answer questions where you don't know the answer you only mislead the user asking the question at best but every one else who reviews the post... we have been performing data refresh on page
render and every 5 minutes by default since SharePoint 2007. We build Business Intelligence Dashboards and Score Cards using Live data with Excel Services, and features like PowerPivot, PowerView
Data in a Microsoft Office Excel workbook that has been displayed in Excel Services can come from two different locations. The data may be stored directly in the workbook, or it may be stored in an external data source, such as in a database or
in an Online Analytical Processing (OLAP) cube.
If the data comes from an external data source, the workbook author or administrator has defined the connection information, often in an Office data connection (.odc) file, which describes how to locate, log in, query, and access the external data source.
When you are connected to an external data source, you can perform a refresh operation to retrieve the updated data. Each time that you refresh data, you see the most recent version of the data, including any changes that were made to the data since it was
last refreshed.
Refresh all connections
On the Excel Web Access toolbar, under the Update menu, click
Refresh All Connections.
Periodic refresh
By using Office Excel 2007, the workbook author can specify that data automatically refreshes at a specified interval after the workbook is opened for each connection in the workbook. For example, an inventory database may be updated every hour, and so the
workbook author has defined the workbook to automatically refresh every 60 minutes. For more information, see Microsoft Office Excel 2007 Help.
A Web Part author can select or clear the Allow Excel Web Access Periodic Data Refresh property to enable or disable this periodic refresh operation, if the property has been defined by the workbook author. When the time interval elapses,
by default, the following refresh alert prompt is displayed at the bottom of the Excel Web Access Web Part:
Refresh data for <List of Connections>? (Now) (Always) (Don't ask me again)
An Excel Web Access Web Part author can also set the Display Periodic Data Refresh Prompt property to control the behavior of the message that is displayed when Excel Services performs a periodic data refresh during a session:
Always      means that the message is displayed with a prompt at each interval.
Optionally      means that a user can choose to continue periodic refresh without displaying a message.
Never      means that Excel Web Access performs a periodic refresh without displaying a message or prompt.
For more information, see
Excel Web Access Web Part custom properties.
I have only listed a couple of the ways you can have Excel services update external data, this is not an exhaustive list
Data Refresh with Excel Services Reference:
http://office.microsoft.com/en-us/sharepoint-server-help/refresh-external-data-in-excel-services-HA010105474.aspx
http://office.microsoft.com/en-us/sharepoint-help/work-with-external-data-in-excel-services-sharepoint-server-HA102830785.aspx
http://technet.microsoft.com/en-us/library/jj879294.aspx
-Ivan

Dynamic Data Connections -- only with Views?

Post Author: mk1
CA Forum: Data Connectivity and SQL
I'm developing reports using Crystal Designer (Crystal Reports Developer) in a mixed database environment. We have an Oracle database that has a TEST and a LIVE version, and I want my users to be able to run reports against either.
I looked at using the Business View Manager that came in my 5-user copy of Crystal Reports Server, to set up Dynamic Data Connections -- but I would have to develop VIEWs for all of my reports, to use that, correct?
How can I give my users the ability to run ANY of the reports I'm writing against either the TEST or the LIVE database, without me having to build views or duplicate (and then maintain duplicates of) the reports?
Thanks
M. KentGeorgia

Post Author: V361
CA Forum: Data Connectivity and SQL
MK1, not sure for your version of CR, but in CRXI, you can add a command, in the command you can add a parameter to select the database.

Line chart with one line per distinct column value

Hi,
For example I have a task dataobject with three fields
type
timeCompleted
duration
I would like to have a line chart that plots the average duration of tasks over time. With a separate line for each task type. Is this possible? All the examples seem to have one line correspond to one column on the dataobject.
Jeremy

Hi Alexandre,
Thanks for the reply. I understand now, I didn't realise you could add the same data object multiple times with different filters. So for each task type I add the task data object to the view with a filter on the task type and this creates a new line in the chart.
I was hoping that when data for a new task type reached the bam then I could make it automatically create a new line in the graph for that type. Oh well, I guess the creation of a new task type will be relativly rare.
Jeremy

Exporting analytic chart with dates

Hi,
I have an analytic chart with a list including some columns: id's names, dates, and amounts. This looks good in Sharepoint, but when I export the list to Excel, the dates are formatted as "General". They cannot be sorted or filtered as dates.
I have tried having the date both as measure and attribute, but it makes no difference, it still behaves like text when it gets over to Excel. The closest I have is having the date as an integer and format as date is Excel, but of course, this looks rubish
in Sharepoint.
Any idea how I can get dates that looks and behaves like dates both in Sharepoint and the export to Excel

Hi Jerry,
I'm ALMOST there! If you could help me with one last thing it would be amazing. I've uploaded my number project and you can downloaded it on the link bellow, if you prefer.
I managed to do the same idea chart as you have. However I would like to have two bars for every JOB (y-axis). On my table i've inputed for every job 4 values = START DATE that was scheduled / Duration period scheduled (this happens prior to the job itself // START DATE Delivered / Duration Period Delivered (this is the actual time the JOB took place). This way I can see at the end of a JOB if I worked during the period I planned.
using your example on the chart above (your reply) Could Proposal have a bar 1.0 / 4.0 - and bellow this bar have another one (with different colours) that went from 2.0 / 5.0 - for example? - the first one representing the "scheduled dates"and the second one representing what actually happened.
I managed to do the four bars but couldnt manage to have them bellow each other.
Tks again for your help
files.me.com/jujudavies/wgugl1.numbers.zip
x'jul.

Column Chart with Multiple axes

Hi folks
I am using flex 2 charts for displaying data. I want to show my data using column chart with secondary axis. However columns for multiple series are coming one over another. here is the code I have attached:-
But I want to put columns side by side. Any thoughts will be appreciated.
Warm Regards
Rush-me

Any thoughts?
Warm Regards
Rush-me

How fit data into dynamic data?

Hello,
I'm having problems when i want to convert the data that i adquired using VISA to dynamic data. The Dataset consist of one row/column with relative time stamps (elapsed measurement time), and up to 30 channels of data. How do i do this?
Thank you for the help
Solved!
Go to Solution.

You should stay way from using Express VIs. They do you now good. And a beginners very often make a code mess by using them. You will be far better of by using traditional Labview. And not some flimflam that NI have glued ontop of Labview using very cheap glue. If you go to toolbar and help, and select example finder. You can search for examples. Just type in xy in search field and you will find many examples. Then I started using Labview I learned a lot by searching in the example database then I was stuck or in doubt. By the way always have concept help on then using Labview (ctrl+h). This and example finder is your best Labview helpers
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Plotting multiple graphs on one waveform chart with dynamic data types

I'm trying to put multiple graphs on one waveform chart and having data agreement errors. I'm wondering if it has anything to do with the fact that dynamic data is being used (I've had no problems with other datatypes in the past). Does anyone know how to correct this problem? I've attached the following .VI. There will be plenty of .VIs on the bottom that won't load, but they are not consequential for this problem.
Thanks!
Brian
Solved!
Go to Solution.
Attachments:
Stiffness Control V1.vi ‏119 KB

you could use stacked plots by right clicking on the chart and clicking on the stacked plots and than on the front panek you can put a bundle function on the FP and hook your signals up
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
multiplotwaveform.JPG ‏138 KB

How to create a Power Pivot Chart with Dynamic X-Axis (date time) similar to that in Performance monitor (Start-- Run-- Perfmon)?

Hi,
I want to create a Power Pivot Chart and a Power View chart in Power BI where the x-axis should be the current system date time axis and it's functionality should be similar to that in Perfmon.exe tool (Start-->Run-->Perfmon)?

Hi Manjunath,
Do you mean you want to programmatically create such a dynamic chart which has a X axis of time? If you just want to do this manually, please take a look at this document which is talking about how to create charts with Power BI:
Charts and other visualizations in Power View
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

I don't get what you are saying.
Is this all the same document?
What version of Pages?
Have you tried to revert to a previous version?
Peter

Plot dynamic data with time stamp

Hi All
I would like to create a plot of dynamic data, (Voltage readings taken with an In 6008) versus time.
When the loop starts taking voltage data I would to plot the data versus elapsed time. Voltage versus time elapsed. I have read many examples and tried for many hours to get this to work.
Please help!
Mike

Hi Mike,
Are you using a Waveform Chart? A chart will continuously plot the data versus time as it is acquired. Try right clicking on the x-axis and selecting Properties>> Display Format. Here you can change the way time is displayed on the x-axis. You can also adjust the way the data is displayed by right clicking and going to Properties>>Appearance>>Update Mode.
I hope that helps! If not, can you indicate what specifically you have set up in your code and how the result is different from the plot you would prefer to create.
Thanks,
Matt
Product Owner - NI Community
National Instruments

SSRS 2008: how to show an empty chart with legend and x and y axis when no data available

Hi,
I am using SSRS 2008, I generated one chart in report designer with the data from Analysis Services (Cube).
According to the dataset, there is no data returned when I run the query. so when I preview the chart, there is nothing but "no data available" showing on the chart.
Here I want to know is there any possible to show an empty chart with legend and x and y axis?
If it is possible, can you tell me how can I make it?
Best Regards.
Connie Zhu

Hi,
When there is no data, the chart displays the message "no data available". But using a little work around, you can display an empty chart.
Please find the below steps given to achieve this
1. Create a new dataset using TSQL to return 1 row of data having the category field and value field set to 0. Add the fields that are necessary for the category fields, series fields and datafields.
   A simple example would be like
   SELECT 'abc' as Category, 0 as Amount
2. Add a new chart, set the category field to 'Category' and set the data field to Amount from above dataset created in step 1.
3. In the new chart, right click the category axis and select axis properties, Click on the labels tab, check on
'Hide axis labels' and then click ok
4. Now set the Visibility property of both the charts depending on the rows returned from your main dataset
   a. click on your main chart and set its Hidden property to :
=iif(CountRows("MainDataSet"),false,true)
   b. click on the new blank chart added and set its Hidden proprety to (the opposite) :
=iif(CountRows("MainDataSet"),true,false)
   Note : Please change the dataset name in above expression "MainDataset" to the name of your chart's dataset
5. Resize the new chart to the same size as your main chart, then position the new chart on the place as the main chart.
   (Note : You can set the position of new chart to be same by copying the location property from the main chart)
6. Now run and observe the result. When there are no rows returned by your main dataset, the new chart (the blank chart) should be displayed.
I've added a working sample of this kind of a report
here.
Hope this helps. Please feel free to discuss if you have any questions.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

Line chart with more than 15 data series - color problem

Hi all,
I've built a line chart with 32 data series (user can control, which of them are displayed at a time). For series 16 to 32 I did manipulate the URL in the browser directly, because Application Express does only display parametrs for up to 15 series. This works fine so far except of displaying the colors. For each sieries I defined a different color. 29 of my 32 series are displayed in the desired color. But series 29, 31 and 32 are displayed in a default-color (#0099CC). It seems that this is a SVG-problem. In the SVG-source I find the wrong color. When I export my application, I see the right color.
Thanks for help,
Chris

Hello,
Which version of APEX are you using?
Go to your Flash Chart attributes - get into your series (click the icon) in the section of Series Query you'll find the maximum rows.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

How to display dynamic datas and double datas (chart)

Hi all !
I would like to display dynamic datas and double datas by using charts.
However, it doesn't work and I don't understand why.
Can you help me to fix that ?
Best regards,
- John
Attachments:
double_dynamics_data.vi ‏54 KB

Hi John,
the sine looks like it should look with your VI!
You convert the DDT to a scalar DBL. That conversion will only use the first sample of the generated sine waveform - usually this is always the same (offset) value when you generate full periods… Or to put it in a mathematical expression: sin(0°)+4 = 4!
When you want to display waveform you should work with waveforms!
Actually, I have used Dynamic data type in order to simulate an signal.
Well, I also simulated a signal in my example VI. I didn't use any ExpressVI to do so…
In a few weeks, I will receive a sensor. I will use in LabView 'DAQ Assistant' whose the ouput is a Dynamic Data.
Nobody forces you to use the DAQAssistent ExpressVI. There are nice DAQmx functions available and LabVIEW comes with a lot of ready-to-use example VIs…
That's why, I used in first place, the 'Simulate signal'. So I think I should keep Dynamic Data Type
I do think you don't need to use the DDT. I think it's better to understand what is going on in your VI. And I think the DDT will be no help for you…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Dynamic data in chart with a click on a column

Similar Messages

Maybe you are looking for