Dynamic Date Calculation for Current Date - 1
I am trying to create a variant with a dynamic date calculation attribute.
I am following the instructions as they are posted to the web but I get an error message.
I want to get all data EQ to the current date -1
In the object for selection screen I enter a D for Selection Variable, for Name of Variable I enter an I to include specific values and the option EQ for current date +/- ??? days. Then I enter 1- for the number of days. I have tried to enter this many times and in many ways but it doesn't work. I keep getting this message "lower limit of interval is greater than upper limit"
Hi,
Welcome to SDN.
Selection-screen has four values -
SIGN
OPTION
LOW
HIGH
Pass your date value in the option low for the screen.
Sign you have already pass as I and option as EQ.
Regard,
Amit
Reward all helpful replies.
Can you paste your code here.
Message was edited by:
Amit Khare
Similar Messages
-
Hi.
I have a date type for which I would like to fill DATE FROM field with current date, but the field DATE TO should stay empty for manual entry.
I defined the following rule which I assigned to my date type but the problem with this rule is that it fills both fields (date from and date to) with current date.
<?xml version="1.0"?>
<TimeRule>
<TimeRuleSource>
<ruleline>
<AssignTimeExp displaytype="AssignTime">
<VarTimeExp displayType="VarTime"
name="RESULT"
position="F">
</VarTimeExp>
<ConstLocTimeExp displaytype="ConstLocTime"
date="now"
time="000000"
timeunit="DAY">
<VarObjectExp displaytype="VarObject" name="SYSTEM"/>
</ConstLocTimeExp>
</AssignTimeExp>
</ruleline>
</TimeRuleSource>
</TimeRule>solved by other way
-
CUIC 9.1.1 Report scheduling issue - getting data only for current date
Hi,
CUIC : 9.1.1
ICM: 9.0.3
Description:We have CUIC publisher and Subscriber deployed in Cisco UCS C series server. When we schedule a report in Subscriber, we are getting data of current date even we schedule for old dates. Eg. If I schedule a report for yesterday, getting output as today's data. This is applicable for all the historical reports.
There is no such issue in Publisher.
Regards,
AlagTry this...
{TableName.DateField} < DateAdd("d", -2, CurrentDate)
HTH,
Jason -
Recurring document - FBD1 with incorrect due-date calculation for AP
Hi Gurus,
in our ECC 6.0 system we are creating with F.14 FI-documents (SAPF120) based on recurring documents (created with FBD1) for various purposes (e.g. Recurring entries for IC-business).
Therefore it's important that the system provides in the final processing of the recurring documents the correct net-due-date in the AP-document based on the document date and the payment term included in the AP-masterdata (LFB1-ZTERM).
Problem:
The processed FI-document contains the correct payment term but the calculated net-due-date with regards to the document date (BKPF-BLDAT) isn't correct. A Dummy-Update of the FI-document with FB02 on field BSEG-ZTERM provides finally the correct net due date but this a not recommended solution.
Any ideas how to solve that issue???
Thanks for replies.
BR, BerndHi Vishnu,
the defined payment term is
fix day: 15
additional month: 1.
Default for baseline date is posting date
Therefore the expectation is that net due date is calculated for posting date
e.g. : 01.02.2012 to 15.03.2012.
The line item after processing in FI-document shows :
Posting Date : 01.02.2012
Bline Date: 01.02.2012
Days/percent: 35
Net due date: 07.03.2012 (dd.mm.yyyy)
That's wrong according to my understanding of the payment term definition.
BR, Bernd -
Create a formula variable using replacement path for current date
Hi All,
I created a formula variable using replacement path for current date.
But when i used this variable am getting an error message saying .
" This Variable cannot be used in this query".
Could you please let me know the reason?
Thanks,
ZehraHi All,
Thanks for all your help...
I just found a solution via the below link
in Bex Formula variabel, Current calander day(sap exit) missing.
Here he is trying to use the existing formula variable.
My doubt here is, Even i could not find this varaible in BEX formula variable, But could see this in BI Content path as mentioned in the above link. DO i have to transport this varaible , or i simply can activate it in production?
I just could find this in BI Content but not in MetaData Repository.
Thanks,
Zehra -
Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible . -
PR delivery date calculation for TAB orders
Hi All,
1) The PR which is created via TAB item in the sales order - the delivery date for such PRs is equal to the delivery date in the sales order. This is happening only for TAB orders without BOM explosion in the sales order.
2)In BOM exploded sales order - (meaning the parent item is entered in the sales order with item category TAP. ) -The sub components of this parent item is auto populate in the sales order. If any one of these sub components have item category TAB...then it creates a PR which has the delivery date equal to the "Planned delivery time" in the info record.
Can anybody please explain why the PR default delivery date is different in the two cases explained above. Both are TAB items...the only difference is one is a stand alone TAB item and the other is via BOM explosion.
Your help will be highly appreciated.
Thanks
AshokHi Sasy
Delivery date calculation for MRP generated PR will follow the below settings
1) Purchasing processing time in the Plant parameters in the customization and is calculated based on the Factory calendar days.
2) Planned delivery time maintained in PIR and is calculated based on Normal calendar days
3)GR Processing time Maintained in Material master record, calculated based on Factory calender.
If you add up in the following sequence then you will get the exact delivery date.
Purchasing Processing time + Plnd delivery time + GR processing time.
Hope it will solve your issue.
Thanks / Karthik -
Can't get access in Time Machine to certain folders for any date earlier than current date/time, even when entering as Admin. Why do certain folders have small red "-" badge in lower right corner of folder icon? Here's a picture of the dilemma:
I've tried monkeying with priveleges using Command I, and changing users, but to no avail. Can anyone help?Right. Here's what the permissions look like from the Finder Command I:
I'm not sure what "Custom" means, but when I then try to change it to "Read & Write", it doesn't take.... just comes back as Custom. Interesting to note that not only am I logged into Joan's account where the data folder and file lives) to do this, but when I do it from my own account as Admin (dunc...mpster) I get the same result. -
Dynamic Internal Table for reading data from external file
Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
KumarHi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards -
Error In Backdated Reservation Creation Base date earlier than current dat
Dear Experts,
Error while creating Reservation for back date.
Base date earlier than Current date.
Can we create backdated reservation ? and post goods issue to the same ?
if it need configuration please explain the steps for allowing creation of backdated reservations.
Thanks in AdvanceWhat is the error message nos.?
-
After updating new MIC in QP02 in Back date not showing current date ?
Hi Guru,
I have updated some new MIC and some Changes are made in existing MIC in QP02 on back date. It is showing on same back date with all correction and new MIC but on today's date i.e. current date it is not showing in the system.
any can help me how to get in current date ?
There are some dump error , for these correction i have updated SNOTE 1467234 and 1471534 in Quality server, but no more effect.
Thanks,
Piyush Patelhi,Premji,
I have updated existing QP in back date i.e. same as when created original date ( expiration date is long i.e. 31.12.9999) , then same thing i wanted to see all updated MIC should be reflect in current date, but it is not coming, so i have updated SNOTE- 1467234 and 1471534 then tried it.It is working fine some how but not as i want.Hence i thing it is solved my problem.
Thanks to you and Mr. Craig for your more suggestion/guidance.
Piyush Patel -
Last month end date based on current date
Hi,
How to show last month end date based on the current date.
Eg:
Current date = "08/26/09"
Var- Last Month End Date = "07/31/09" etc...,
Please help me how to get it...
Thank You!Good to hear that it worked for you. but not for me.
I tried like this:
1st::
1. var1= ToDate("06/30/09","MM/dd/yyyy")
2.Var2= RelativeDate([Var1];-DayNumberOfMonth([Var1]))
result: 5/30/09
2nd:
RelativeDate('6/30/2009';-DayNumberOfMonth('6/30/2009'))
result: 5/30/09
Am working on SAP OLAP cubes.
Please help me where am going wrong....
Thank You! -
FM to get previous sunday date based on current date(SY-DATUM)
hi all,
Is there any function module to get the previous sunday date based on current date(sy-datum)?
Regards,
Kapil SharmaHi Kapil,
You can follow the logic below:
data:
l_date like sy-datum, **TODAY
l_date2 like sy-datum, **Previous Sunday
data:
l_daynr like HRVSCHED-DAYNR.
*Get today's date
l_date = sy-datum.
*Gey today's day (Monday, Tuesday, etc.)
CALL FUNCTION 'HRIQ_GET_DATE_DAYNAME'
EXPORTING
langu = 'EN'
date = l_date
IMPORTING
daynr = l_daynr.
CASE l_daynr.
*If it is Monday
WHEN 1.
-Subtract 2 days for the previous Sunday
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 2
IMPORTING
ed_date = l_date2.
*If it is Tuesday
WHEN 2.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 3
IMPORTING
ed_date = l_date2.
*If it is Wednesday
WHEN 3.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 4
IMPORTING
ed_date = l_date2.
*If it is Thursday
WHEN 4.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 5
IMPORTING
ed_date = l_date2.
*If it is Friday
WHEN 5.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 6
IMPORTING
ed_date = l_date2.
*If it is Saturday
WHEN 6.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 7
IMPORTING
ed_date = l_date2.
*If it is Sunday
WHEN 7.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 8
IMPORTING
ed_date = l_date2.
ENDCASE.
Regards,
Dilek -
FM to get the previous sunday date based on current date(sy-datum)
hi all,
Is there any function module to get the previous sunday date based on current date(sy-datum)?
Regards,
Kapil Sharma
Moderator Message: Basic date related questions are not allowed
Edited by: Suhas Saha on Sep 19, 2011 11:39 AMHi,
There are function modules to find out the current day of the week depending on sy-datum. These are as below:
1. DATE_COMPUTE_DAY - Returns a number indicating what day of the week the date falls on. e.g. Monday is returned as a 1, Tuesday as 2,...., Sunday as 7.
2. RH_GET_DATE_DAYNAME - Returns the day based on the date provided, e.g. Monday, Tuesday,..., Sunday.
Using any of the above, if you can find out the current day, then you can calculate and compute the date of the previous Sunday.
My observation is that using the first FM might make the calculation simpler.
Hope this is of help to you.
Regards,
Shayeree -
Error while creating Data Source for master data attributes
Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijithapologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri
Maybe you are looking for
-
Need help booting from usb on Lenovo U410
I have burned a .iso file on a usb stick, and now i want to to boot my laptop from the usb. I shutdow the computer and a pressed the NOVO button on the side start the cmmputer to give me the menu under the BIOS setup and the BOOT tab, i am confused
-
MOVED: MSI x99s Gaming 7 problem
This topic has been moved to GAMING Motherboards. https://forum-en.msi.com/index.php?topic=184649.0
-
Billing error ("Trust" issue)
My account has been debited for two separate charges of $10.10 each. I did not complete any Skype calls, and by account reflects that. Try as I might, I cannot figure out how to communicate directly with a human being at Skype. How can I get these
-
Was I quoted correctly here in AUST that the repair for my iphone 5 screen is $300+ ???? Is it only $150 in the US ??
-
I can't access my .abr files
I was in Photoshop today and had no issue accessing and loading my brushes which are .abr files. Some time later I downloaded new brushes (from a reputable source) and now I can no longer see, access or load my .abr file. Any suggestions what went