Dynamic Disk Showing Online Error

Hi Team,
I have a file server , with 3 TB of spanned Drive. This Drive consist two virtual Dynamic Disk ( 1.5 TB each). One of 1.5 TB Disk
Dynamic Disk showing ( Online Error). and other 1.5 Tb disk is fine. I read some Article it Says error can be resolved by Reactivating the disk.
https://technet.microsoft.com/en-in/library/cc787481(v=ws.10).aspx#BKMK_5
============================================================================
A dynamic disk's status is Online (Errors).
Cause: The dynamic disk has I/O errors on a region of the disk. A warning icon appears on the dynamic disk with errors.
Solution: If the I/O errors are temporary, reactivate the disk to return it to Online status. For instructions describing how to bring
the disk back online, see Reactivate a missing or offline dynamic disk.
===========================================================================
I just wanted to know . what will be impact if I reactivate the Disk any impact in Data ? what are precaution I can take while Re-activating the disk
This is virtual windows server 2003 running on vmware.
I will Appreciate if any one respond on this
Regards, Triyambak

There should be no problem on Data. However, it is always recommended to backup them before proceeding. OneDrive can help as a temporary storage.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

When I format hard disk while installing windows it shows an error?

When I format hard disk while installing windows it shows an error and says that windows can't be installed to this hard disk, but I have installed windows before. How can I install windows?

You are getting this message because you are trying to create an iCloud account on a PC by signing with your Apple ID. You can only sign into an existing account on a PC. You first have to create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

Workgroup Computer name will showed as "#Error" - Logical Disk Extension Management Pack By David Allen

Anyone is applying the Logical Disk Extension Management Pack By David Allen?
I have the issue whereby the Computer name will showed as "#Error" on the managed computer which is in
Workgroup environment.
Refer to this screenshot --> https://skydrive.live.com/?cid=75e44d0edffe5025#cid=75E44D0EDFFE5025&id=75E44D0EDFFE5025%21942.
Is anyone know the way to fix this?
Thanks!
regards, Han Seen.

The solution I used is to edit the management pack: the report displays the computer name only for computers that contains suffix in its name. if in SCOM the computer name is hostname.domain.net, only hostname will be shown as computer name.
you can change it by editing the management pack:
replace line number 2230 instead of
<Value>=Left(Fields!Computer.Value,(instr(Fields!Computer.Value,".")-1))</Value>
replace it with
<Value>=Fields!Computer.Value</Value>
now it will show you the full computer name under computer name area, and workgroup computer will be shown as well.

Drive fails verification, but Disk Utility on OS X disc shows no errors

Hi everyone,
After running Disk Utility locally to verify my disk, I received the following message:
Volume Header needs minor repair
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I know I can't repair the disk while I'm using it, so I restarted with my Mac OS X install disc and ran its Disk Utility to verify and repair the disk. However after running another check on the disk from the OS X disc, it told me that the drive seemed okay and didn't need repairs.
Huh... weird. So I went back into OS X and reran Disk Utility to check the disk again -- same error returned.
So I'm left with a disk with errors, but errors that I can't fix because the OS X disc refuses to acknowledge that they exist!
Is there another solution to this that I'm missing? I've also tried running fsck from single-user mode and it tells me the same thing as the OS X disc -- no errors. What's going on here? Can anyone shed some light on this?
Thanks so much,
Danny Stewart
Mac mini Mac OS X (10.4.6) Intel Core Duo, 1.66 GHz

Hi Mario,
Apologies for the delay in my response. Here is the output from the log file after running a fresh scan:
Jun 29 23:30:11: Disk Utility started.
Verifying volume “Danny's Mac”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
d.",1)
Danny's Mac
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “Danny's Mac” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I hope this helps to diagnose the problem, although it doesn't look particularly helpful. Anyway, thanks for the assistance!
Best,
Danny
Mac mini Mac OS X (10.4.6) Intel Core Duo, 1.66 GHz
Mac mini Mac OS X (10.4.6) Intel Core Duo, 1.66 GHz

How can I make an invalid dynamic disk Array available to the OS again

Hello Storage Pros
The setup
I have a Promise VTrak E610f head unit with 2 VTrak 610j expansion units attached to it together giving me over 27 TB of usable storage space.
At the hardware level I slip the storage into 6 parts containing 7
1TB disks and had the parts configured into 6 RAID 6 arrays. In the end; each of the 6 arrays gives me 4.6TB of usable storage space.
On the OS level, I have the storage attached to 2 servers: Windows server 2008 and windows server 2008 R2 over a Qlogic fiber channel switch. Each of the 6 arrays are viewable as basic disks of 4,6Tb which I went on to configure as a single RAID 0
spanned volume of 27TB and for that all the disks had to be converted to dynamic.
The problem
Now comes the problem: On my first attempt to do a firmware update on the VTrak E610f storage; all the volumes were rendered foreign and I had to import them to be able to use them. Although the import was successful, I lost all the set NTFS permissions
and SMB share and I had to manually reconfigure them. Upon doing so The OS registered some inconsistencies in the storage and recommended that I ran chkdsk. Since the storage is that big I reluctantly complied and restarted the server.
The first server was restarted BUT chkdsk did not commence as scheduled, the server powered right up. After logging in to inspect; I discovered - to my surprise, that the disks were now shown as invalid in Disk Manager and were no longer visible to
the OS. Assuming that maybe a restart of the other server and the storage would set things right, I went ahead to do so but to no avail. After rebooting the entire system (including the storage), the other server also displayed the disks as invalid and were
no longer visible to the OS as well.
My question is; how can I make the disk available again from this ‘invalid’ state without losing data?
What I tried but did not help:
Taking the disks offline and then online again did not work, after the disks were online again, they still appeared as invalid.
Reactivating the disks threw an error “operation not allowed on an invalid disk pack”
Calling support of the storage manufacturer: they did not find anything wrong with the system, after 5 hours we had to stop.
I fear converting the array from dynamic to basic will destroy all the data.
HxD is showing no errors in the disks
If there is any expert out there with helpful tips; your assistance will be greatly appreciate.
Cheers
John

Hello Shoan
Thanks a lot for your response and tips. Sorry I could not get back to you in good time for I had to run some of the tests you provided, it took some time to
thoroughly re-test the system.
The summary
The initial firmware upgrade attempt forced 3 disks offline and the other 3 became foreign. I had to re-import them to have access again. after re-importing
the disks I realized all NTFS permissions and SMB shares of the folders on the disks had disappeared, but at least the disk was visible and accessible at that point - but not fault free. It was recommened that I let chkdsk run. However rebooting the
system to allow chkdsk to run did not result in chkdsk running, instead chkdsk did not run and after restart, the OS showed the disks as invalid. And that is still the case now.
Response to your questions:
Yes the storage array was (and is still) connected to another server 2008 R2 server when the problem occurred. The second server is also displaying the same problem: the disks are shown as invalid.
The loss of SMB shares and NTFS permissions occurred after the initial firmware upgrade attempt, some disks (3 out of 6 of them) were forcibly offlined and the other 3 were, suddenly, marked as foreign. In the end, and to have access to the disks
I had to online the offlined 3 disks and then reimport the rest of them. From the way I understand it, if the upgrade was not the cause, then at least it was the trigger.
In as far as converting disks from dynamic to basic, I was not in luck so far:
Three of the companies I have contacted (recommended by promise Technology technician) so far only work with smaller disks like 2TB, 27 TB like I have is so
far too big.
I’m not sure converting the disks to basic will help much though, since that would break the single 27 TB volume which the OS was working with into 6 individual
disks of 4.6 TB. Will I be able to get the data back that was written to just one volume from those 6 individual and unrelated disks?
Above all, I have connected the RAID storage system to a newly installed Server 2008 R2, the disks are also shown as invalid.
I have spent more than 17 hours in remote sessions with a Promise Technology technician trying the resolve the issue. From the technician’s side all seems in place with the exception
that the disks are invalid in the OS.
I have contacted Microsoft Customer Support service with the issue. Given that Microsoft did not manufacture the storage unit, can they help at this point – or am I better off
putting my hopes else?
Your help is always appreciated and again, thanks for your response and advice.
JohnV

T410s Recovery Partition -- revert Dynamic disk to Basic?

This is a stupid error on my part, but while I was trying to wipe an external HDD and recover all the space, I saw an option to "Convert to Dynamic Disk", so, I clicked it. It gave me the options of Disk 0 and Disk 5 (external was on Disk 5), but I checked the boxes for both drives, not entirely understanding what the effects would be.
So, when I tried to create my recovery disks and clicked on recovery partition. Now, I'm not able to create recovery media anymore and am getting a runtime error every time the system tries to run the "recovburncd.exe" file.
When I try to open the "Lenovo_Recovery" partition, it comes up as blank. My guess is that files are hidden, but in Explorer, it shows that there are "2.29GB free of 9.76GB".
Being that I converted disk 0 from Basic to Dynamic, I'm guessing that's the root cause. Is there any way to revert this? All searches have been without success. Is there any other workaround?
Any help would be greatly appreciated.

You can try a recovery software, but I think you have in trouble.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

WS2008 R2 - Invalid dynamic disk

I have a software RAID5 array in Windows Server 2008 R2. 5x4TB drives. After clean shutdown all the disks in disk management are listed as invalid. When I try to reactivate any of them I get this error message: This operation is not allowed
on the invalid disk pack.
What can I do? I've searched high and low and can't find a solution.

Hi,
Based on research, it seems a bug that Dynamic disk(s) comes back as INVALID after taking offline, or following reboot.
This bug surfaces when the size of a record in the LDM matches exactly the size of a block on disk. In this situation, volmgrx incorrectly flags the record as incomplete. After reading the whole database, volmgrx will clean all incomplete records. That’s why
we end up with an empty volume record and with a plex that’s not referenced by a volume.
In this repro, we have a record for a volume that’s bigger than 2TB, has a 3 digit number and has no drive letter (which means attributes are stored in the record). Because of this, the record size was exactly 68 bytes, which is the size available in the block
after all the headers.
If the effected Windows 2008 R2 server is Non-DPM server, we must re-create the volumes manually and restore from backup.
If the server is a DPM 2007 server, all of the dynamic disks in the DPM storage pool will be inaccessible. To avoid having to rebuild the DPM server from scratch, you can use the following procedure to clean (wipe out) the dynamic disks and recreate the DPM
replica and recovery point volumes while maintaining the rest of the DPM 2007 configuration.
WARNING: This procedure is non-reversible, and will result in ALL replica and recovery point volumes to be permanently lost. Verify with the customer that he has a >2TB volume configured before proceeding.
1) Run diskpart.exe - and issue a "list disk" command - and see which disks show the status of INVALID
2) Select one invalid disk at a time and issue a CLEAN command to wipe it out and make it a RAW disk again.
3) Select one disk at a time and convert to GPT, then Dynamic.
4) Exit diskpart.exe
5)Now add the same disks to the DPM storage pool under the management tab - disk tab.
6) From command prompt - run the following command to remake the DPM volumes - this may take hours...
dpmsync -reallocatereplica
7) AFTER Dpmsync completes, re-run diskpart.exe and save the output of the "list volume" command.
NOTE: Make the DOS window so if has a height of 9999 before running list volume - then copy the contents of the window to notepad.
8) Search the output of list volume and locate any volumes are larger than 2000 GB (2TB) - note the mountpoint path.
9) From command prompt - run mountvol.exe >mountvol.txt - then open the mountpoint.txt using notepad. Search for the path for the >2GB volumes to get the volume {Guid}
10) Use mountvol.exe to assign a drive letter to that volume.
mountvol E: \\?\Volume{bf14e9ca-d929-11dd-8f76-806e6f6e6963}
11) Repeat steps 7-9 for ANY and ALL volumes that have a volume numbers above 99, and exceed the 2TB size.
It is now safe to reboot and not experience the dynamic Invalid status for the dynamic disks. If the customer creates any more dynamic volumes that exceed 2TB - they MUST assign a drive letter or they will experience the same issue.
12) Run Consistency checks for all the data sources to get the DPM server back into a consistent state and continue protectecting the production servers.
I hope this helps.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Dynamic CRM 2013 Online how to execute Report, generate PDF and email

Dear All,
I am using Dynamic CRM 2013 online. For quote, I have workflow and Dialogue processes for review process. On approval, I want the system to generate a PDF of quote report, attach the PDF and email it to the Customer.
Better I would like, When approver, clicks on the approve button, the system should auto generate a PDF of quote report, attach the PDF and email it to the Customer, without any further input from the user. If its not possible, I may have to put button on
quote form.
I am using the attached code, but facing various issues.
1. Under prepare the SOAP Message coding part, I am not sure what should be the below URL for CRM 2013 Online?
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
2. What should be the emailid here? Is it Recepient Contact id(Guid) ?
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
3. Using this code, not able to create Entity for "ActivityMimeAttachment", I am getting newEntity as undefined.
Below is the code I am using. Please check and help me out, where I am going wrong. Let me know if any better way to implement it. At present, I have put one button on quote form, on click event, below code will get executed.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript">
var Xrm;
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
function getReportingSession() {
var reportName = "Quotation_Report"; //set this to the report you are trying to download
var reportId = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var recordid = Xrm.Page.data.entity.getId();
// recordid = recordid.substring(1, 37); //getting rid of curly brackets
alert(recordid);
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
retrieveEntityReq.send("id=%7B" + reportId + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" + reportName + "&isScheduledReport=false");
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
function createEntity(ent, entName, upd) {
var jsonEntity = JSON.stringify(ent);
var createEntityReq = new XMLHttpRequest();
var ODataPath = Xrm.Page.context.getServerUrl() + "XRMServices/2011/OrganizationData.svc";
createEntityReq.open("POST", ODataPath + "/" + entName + "Set" + upd, false);
createEntityReq.setRequestHeader("Accept", "application/json");
createEntityReq.setRequestHeader("Content-Type", "application/json; charset=utf-8");
createEntityReq.send(jsonEntity);
var newEntity = JSON.parse(createEntityReq.responseText).d;
alert("new entity" + newEntity);
return newEntity;
function createAttachment() {
var params = getReportingSession();
var recordid = Xrm.Page.data.entity.getId();
alert("recordid " + recordid);
var orgName = Xrm.Page.context.getOrgUniqueName();
var userID = Xrm.Page.context.getUserId();
//create email record
// Prepare the SOAP message.
var xml = "<?xml version='1.0' encoding='utf-8'?>" +"<soap:Envelope xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'" +
" xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'" +
" xmlns:xsd='http://www.w3.org/2001/XMLSchema'>" +
"<soap:Header>" +
"</soap:Header>" +
"<soap:Body>" +
"<Create xmlns='http://schemas.microsoft.com/crm/2007/WebServices'>" +
"<entity xsi:type='email'>" +
"<regardingobjectid type='quote'>" + recordid + "</regardingobjectid>" +
"<subject>" + "Email with Attachment4" + "</subject>" +
"</entity>" +
"</Create>" +
"</soap:Body>" +
"</soap:Envelope>";
// Prepare the xmlHttpObject and send the request.
var xHReq = new ActiveXObject("Msxml2.XMLHTTP");
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
xHReq.setRequestHeader("SOAPAction", "http://schemas.microsoft.com/crm/2007/WebServices/Create");
xHReq.setRequestHeader("Content-Type", "text/xml; charset=utf-8");
xHReq.setRequestHeader("Content-Length", xml.length);
xHReq.send(xml);
// Capture the result
var resultXml = xHReq.responseXML;
// alert("resultXml " + resultXml);
// Check for errors.
var errorCount = resultXml.selectNodes('//error').length;
if (errorCount != 0) {
alert("ERROR");
var msg = resultXml.selectSingleNode('//description').nodeTypedValue;
alert(msg);
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
//var emailid = userID;
var post = Object();
post.Body = encodePdf(params);
var email = new Array();
email[0] =new Object();
email[0].id = emailid;
email[0].entityType ='email';
post.Subject ="File Attachment";
post.AttachmentNumber = 1;
post.FileName ="Report.pdf";
post.MimeType ="application/pdf";
post.ObjectId = Object();
post.ObjectId.LogicalName ="email";
post.ObjectId.Id = email[0].id;
post.ObjectTypeCode ="email";
alert(post.ObjectId.Id);
createEntity(post,"ActivityMimeAttachment", "");
alert("created successfully");
email.Subject = "Your Order";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: customerId, // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerId, // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity). activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] + "&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] + "&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
</SCRIPT>
<SCRIPT type=text/vbscript>
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</SCRIPT>
</head>
<body>
<input type="button" onclick="createAttachment();" value="Attach Report" />
</body>
</html>
Thanks. and waiting for your valuable comments.
- Mittal

Hello,
Yes, I was able to make my code working as below. Tested on CRM online 2013.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date$([-+]?\d+)$/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('Quotation');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width, height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "Quotation"; //set this to the report you are trying to download
var reportID = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" +
reportName + "&isScheduledReport=false&p:CRMAF_Filteredquote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html>
Thank you,
Mittal.

Firefox crashes as soon as Flash video tries to load and Safari shows the error "Plug-in Failure"

I am unable to use Youtube or view Flash video on any sites.
Firefox crashes/quits as soon as a video tries to load and Safari shows the error "Plug-in Failure".
I have uninstalled Flash, downloaded a fresh version and installed, but no joy.
I am using OS X 10.6.6.
This is what I have tried so far;
1. Repaired Permissions.
2. Restarted with external drive and run Disk repair.
3. Restarted with external drive and run DiskWarrior.
4. Completely uninstalled Flash plugin. Robooted. Reinstalled Flash plugin. Rebooted.
5. I even installed an earlier version of the plugin to see if there was some incompatibility with the latest version.
6. Created a new user login and tried from there. Same problem.
Any ideas?

You have what is necessary for Flash Player to be working. Firefox had some issues last year but it was after loading a video or the website. I had not heard of it lately and even last year don't recall it happening on the Macs.
What is happening with yours sounds like a direct conflict with some addon/extension.
Here is the link from Firefox describing what happened last year. You might want to see if there is anything more current.
https://support.mozilla.com/en-US/kb/The%20Adobe%20Flash%20plugin%20has%20crashed?s=Firefo x+crashing+browser&as=s
I'll get the Mac troubleshooting guide in a minute and post it also.
Any adblock or popup blocker software would cause this also.
Thanks,
eidnolb

I have created a projet on imovie and when I try to share it. it automaticall closes and shows an error.. what should I do.. I dont want to loose all my documents at all...?? its very urgent plss tell a solution to it as soon as ppossiblc

I was working on my project on imovie and when I was trying to share it.. it automatically closes and shows an error... I have tried to do it so many times and it shows the same error again and again.. I dont want to loose the document at all.... I facing too much problem plss help me plss its very urgrnt for me... plss help me :-(

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

Internal Hard Drive Died - Now replaced - Disk Utility Internal Error

When using the original system disk to install OSX the new hard drive isn't recognised even though I have formatted it for an intel based mac (GUID Partition, Extended Journaled etc) using my imac . When launching Disk Utility from the system disk and trying to erase/partion the drive, I get the following error message "Disk Utility Internal Error - Disk Utility has lost its connection with the Disk Management Tool...". When connected to my imac using a converter it appears on my desktop. Any help would be greatly appreciated. The macbook in question is a 2006 (white). PLEASE HELP.....

Hi - Thanks for your reply. I have tried that but it still doesn't work. I have had a look around online for the past couple of hours and I found a post that said that newer hard drives can't be recognised by an original 10.4 osx system disk. I would need to find a copy of 10.5 to install OSX on a new hard drive. I dont know if that's true because I dont have a copy of 10.5. Any thoughts would be appreciated!

My I Mac showed an error while updating the OS and now just hangs. What should I do?

I Mac asked me to update the OS from 10.7.3. It showed an error and now the computer just hangs. Its become excuriatingly slow. Takes about 15-20 minutes to boot up and takes hours to perform any function. I tried to update the OS again but it keeps showing an error in connecting to the server. What do I do.?

Have you tried booting into the Recovery HD to check/repair your disk. Restart holding Command+R - once booted select Disk Utility and then select Macintosh HD and click on 'repair disk' If it fixes anything click repair disk again until you get a clean pass. Whilst in Disk Utility you could also 'repair disk permissions' With Macintosh HD still selected click on 'repair disk permissions'. Once done, restart as normal from the Apple menu.
Then try updating again using the 'combo', available here: http://support.apple.com/kb/DL1582
If you still have problems you could try a Safe Boot: restart holding down the shift key until you see the grey progress bar. Once booted restart as normal from the Apple menu.

Dynamic Disk Showing Online Error

Similar Messages

Maybe you are looking for