Dynamic display name of the sender

I have requirement like below:
After creating and executing any Agent/iBOt in OBIEE 11g, the Display Name of the Sender in the From address of email delivered to recipients is showing as "Administrator".
The user who is authenticated and authorized into the OBIEE also created an agent, he is asking that email should show his name in the From Address when it is delivered to the recipients.
I know why this is happening, I have provided the Display Name of Sender as "Administrator" while configuring the Agents at the Enterprise Manager Level.
What I am currently looking is, if there is any alternate solution to Dynamically display the name of the user who creates the Agent in the From address of the email when it is delivered to the recipients.
Thanks in advance
-Bharath

Any body there with the answers !!

Similar Messages

Passing the queue name to the sender JMS adapter at run time..

Hello Experts,
I have a scenario where PI is to pick data from MQ queues. The message type coming from queues is same and the procession needs to be done with PI is also the same.That's the reason why we want to have only one interface processing the data for all the queues.
My question here is that is there any way where I do not put the queue name in the sender adapter at design time and based on the data availability in the queue let the sender adapter know the queue name to be processed at run time.
Any suggestions will be greatly appreciated.
- Rajan

> My question here is that is there any way where I do not put the queue name in the sender adapter at design time and based on the data availability in the queue let the sender adapter know the queue name to be processed at run time.
Unfortunately for JMS Sender CC it is not possible, but other way around is possible. I.e. you can dynamically choose the receving queue names by using ASMA "JMSReplyTo" in JMS Sender CC.
Regards,
Sarvesh

Change the format of the name of the sender in UWL

Hi Experts ,
In my UWL the column "FROM" , display the name of the sender as " Last name, First name" . My requirement is to display the name as "Firstname, Last name " .
eg: In my uwl now it display like "Jobs, Steve" . But my requirement is to display it like "Steve, Jobs".
Can you suggest any solution for this requirement ?
Regards,
Sumana

>Our client is requested for this naming format Firstname , Lastname .
Did they tell why?
I don't know any other way than creating a new custom columns & attributes into UWL and then populating them from the webflow/workflow container. Then you of course need to populate the workflow container too properly. I personally see this as something that I would avoid to do at all costs. Also remember that the "sender" task will not perhaps work properly even in its current form in the future or in some other workflow. If the work item is create by workflow system user WF-BATCH, the sender column will show this user instead of the "real sender". This is highly likely scenario.
Of course there might be some easier way to do this from the UWL/portal side. But I guess the standard way is the one that Armando described.
Regards,
Karri

How to change display name of the attachment item attribute.

Hello Experts
I have a requirement to send a notification with attachment but attachment name should be attachment name,
Is there any way to change the display name of the Attachment
Please advise;
Thanks
Rajesh.

Azmathulla,
It is not possible to change the name of the server, but you can add a label to it (see attached screenshot). And yes, it can be done during production hours, this doesn't affect the production data.
Please let me know if this answers your question.

No Name of the Sender in whatssap notifications in iPhone

Whenever i receive whatssap message notifications on my ios home screen , it doesnt display the name of the sender.
Instead of that , the names which each of the contacts have included in their "whatssap profile" section, is being displayed along with their message.
& for contacts who have not included their name in the profile sections, whenever they send me a message, my notifications shows " Whatssap" as the name of the sender along with their message
When i click on whatssap application , the names of all contacts in the chat section is as per my contacts list only. I dont see these names during the notifications.
For eg
Suppose I have a contact name as Michael in my iphone. ( Michael may have put his name in profile section of whatssap as Mike ).
So,, whenever Michael sends me whatssap message , i should receive notification as "Michael -- & the message he sent".
But I receive notification as " Mike -- & the message he sent"

Since your using a 3rd party app ask whatsapp.

Mail running under LIon no longer grays out the name of the sender of an email that has been read. How can I get that to happen?

Under the old version of Mail, when an e-mail was read, the name of the sender was greted out so that I knew I had read that email. This does not seem to happen under the new Mail thaqt came with Lion. Help!?
Chuck Humphrey
[email protected]
303-997-2755

Kirk,
Thanks again for your suggestions. No, I don't get an
error message. In fact nothing happens. My name and
key are typed in and from what I understand, once you
do that with a real key it directs you to the
registration page. When I get done entering the
information the window just sits there without any
button or option to continue.
QT Pro is already in the QT (non-pro) you installed and the key (which is a hash of your name in part) allows the Pro features to work.
No redirect, internet, nothing like that. As such many people have activated and think they haven't. Just look at the menu items and see if the "Pro" logo is shown next to a few (which are greyed out and not available without Pro). If not you are done.

How to change the Group Display Name in the UME?

Hello experts,
from time to time due to reorganisation our departments group names change.
So far this was a big deal because it is not possible to change the Display Name of a group created in the Portal´s UME?
So far a new group with the department name has to be created and all group members have to be connected to the new group again. This is not a convenient way..
Is there a way to configure the UME to allow to modify the Display Names of Groups?
Thanks in advance.
Thomas
Edited by: Thomas Krynicki on Jan 19, 2009 5:15 PM

Thank you for the quick answer.
However my problem is still not solved.
I am using the portal groups also as permission objects for KM. That´s why I do not want to create a new group because the new one will not appear in the ACLs of the KM Objects.
For me it is important to modify the Display Name of an existing Group. The GroupID shall not change. The new Display Name should be updated then automatically in the ACLs of KM Objects in question.
By exporting the group data:
[group]
gid=TeamA
gdesc=All members of Team A
user=member1, member2
There is no parameter for changing the Display Name of the group. There is only the Description Parameter.
So far I didn´t find any solution.
Any other ideas.
Thanks in advance.
Thomas

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

I don't have a signature set up, but did a little research. Someone posted that these will show up when I send an email to myself, but will not show up when sent to another person. I sent a test email to a friend to check for sure.

File Name in the Send Port with PGP Encryption

Hello,
The File Name in the Send Port should be set with the mask like ABC.txt.pgp. Since I have used the PGP Encryption Component it is generating the File name like ABC.pgp.txt.pgp. But what I need is just the ABC.txt.pgp. How can be this be done. Any help is
greatly appreciated.
Thanks

What you are seeing is the expected behavior. If you are referring to this:
https://code.msdn.microsoft.com/windowsdesktop/BizTalk-Sample-PGP-ebcbc8b2
or one of it's derivatives, it will internally modify FILE.ReceivedFileName to append .pgp if that property is set.
So, if you use just %SourceFileName%, you will likely get the desired result. Otherwise, you will have to explicitly set FILE.ReceivedFileName to ABC.txt somewhere before the PGP component.
You can also modify the source code to remove this behavior.

HT5557 hello...my questions is related to objective C...Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

hello...my questions is related to objective C..
Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

ashish35,
No one from Apple here - we're just users like you. All I can tell you is that electronic fail and with MacBook Pros (and most notebooks) the components are so integrated as to make a repair to the logic board practically impossible, hence the high prices charged for repairs.
Only you can decide if you want to have your computer repaired or put the money towards the purchase of a new computer. If you do decide to purchase a new unit I would suggest that you also purchase the AppleCare Protection Plan which increases your warranty from one year to three years.
Sorry and good luck,
Clinton

Is there a way to hide the name of the sender of a text message?

Is there a way to hide the name of the sender of a text message?

If the sender's name is not in your Contacts only the number will be shown, not the name.

How to display name and display name of the role during request

Hi,
Is it possibe to display Role Name and Role Display Name on the "Select Roles" page during ROle Request for Others? In the "Roles Available" I can only see "Role Display Name". I was trying to look at "AssignRolesDataSet.xml" but was unable set what I need (for exmaple lookup-query...). How to achieve desired funcionality?
Best
mp

Hi,
I should implement your same funcionality, but looking for a solution I didn't find any useful suggestion.
Did you find the solution?
Thanks in advice
Daniele

How to get the display name of the dropdownlist?

How can i get the display name of the dropdownlist.
I want to have value as other data not the same as display name.
In that case is there any easy way to get the display name of the selection from the dropdownlist.

I usually just use a hashmap to store the value and label, if I want to retrieve the label again later.
          HashMap bleh = new HashMap();
          bleh.put(dropDownValue, "Drop Down Label"); //Item value (any object), Item Label (String)
          Iterator it = bleh.keySet().iterator();
          while (it.hasNext()) {
               Object key = it.next();
               SelectItem selectItem = new SelectItem(key, bleh.get(key));
          //And then later, when you want to retrieve the label
          bleh.get(itemValue); //The item value of the label you wantThe value is easy to get because the selected item(s) from the list will be set to the value(s) the user selected. You should have a getter in your bean for that.
CowKing
Message was edited by:
IamCowKing

IP phone display name of the called party with grabage

Hi,
I am running CME with 12.4.14(t) ios. The problem which i am having is that when anyone dial any extension, the name is displayed of the called extension & some garbage charater are shown

Hi,
CSCsj18014 is:
Caller ID string received with extra characters
Symptoms: A caller ID may be received with extra characters.
Conditions: This symptom is observed when caller ID is enabled on both
routers and when the station ID and station name are configured on the FXS
side.
Workaround: There is no workaround.
The reference of FXS ports makes be believe that CSCsj18014 is not the applicable bug. However, in the same results page, we see another bug matching better a problem of garbage w/o FXS ports:
Garbage characters in called name displayed on calling phone
Symptom: Garbage characters in called name displayed on calling phone Conditions: When placing a call from one phone to another phone on CME using 12.4(11)T3, the displayed name on the calling phone gets some unidentified characters at the end of the displayed name after a few seconds have passed. The problem was NOT seen in 12.4(11)T2
Now, the bug toolkit does not give the number for this "related bug" and I was not able to localize it.

How to display name of the employees start with any letter?

Hi Developer,
Please guide me in solving the issues, that i need to display names of the employee starting with any letter.
example:
if i provide name of the employee starting letter 'A' it should display only those name in the database table with starting letter.
parameters: a*
it should display name with starting letter a.
example:
abdi
akbar
akash
akilesh
thanks,
ravi.

Hi Ravinder,
You can use Ranges for this purpose:
RANGES: r_name FOR type_name.
r_name-sign = 'I'.
r_name-option = 'CP'.
r_name-low = 'a*'.
INSERT r_name.
SELECT name FROM table_name INTO TABLE it_name WHERE name IN r_name.
Regards.

Dynamic display name of the sender

Similar Messages

Maybe you are looking for