Dynamic distribuition list?

Hi,
Does Deliver support dynamic recipient list? For example, the email list would be in a table and at delivery time, delivers would fetch this list from the database or BI repository.
Thank you.

Hi...
If i get the question properly, this may be the procedure to do this.
As you are saying that you have user mail id's in the DB.
While developing a report only you have to add another column and change the functionality as case when 1=0 then customers.region else user end.
and hide this.
Before this you need to specify the email id in "My Account" of each user.
Now while creating an iBot you need to specify you need to select that column from that criteria i recipients list.
(I am not able to tell the correct field to do this as i am far from my system to verify my self)
There you need to select that column
This is the process to deliver the iBot to the logged in user.
Still i am not sure this is what you want...
anyhow if it helful then ok else sorry...
Thanks & Regards
Kishore Guggilla

Similar Messages

Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

How to create Exchange dynamic distribution list using multivalue extension custom attribute

I am trying to create a dynamic distribution list using an ExtensionCustomAttribute. I am in hybrid mode with Exchange 2013. The syntax I have is this:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {(ExtensionCustomAttribute2 -eq 'NH')}
This works correctly on-prem. But hosted always results in an empty list. I can see in dirsync the attribute is in the hosted environment, but for whatever reason, the distribution group gets created but always come up null.
If I create a group looking at the single valued attributes, such as CustomAttribute6 -eq 'Y', it works correctly on-prem and hosted.
If anyone has any suggestions I would appreciate it.

I don't think I provided enough information about the problem. Let me add some and see if it makes sense.
I have an Exchange 2013 on-premise configured in hybrid mode with Office365. For testing purposes, I have 2 users, Joe and Steve, one with the mailbox on-prem, and the other with the mailbox in the cloud. Each of them has CustomAttribute6 = 'Y'
and ExtensionCustomAttribute2 = 'NH'. Dirsync shows these users and these attributes are synced between on-prem and cloud.
Using on-prem Exchange powershell, I run the following command:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')}
This correctly finds the 2 users when I query for them as follows:
$DDG = Get-DynamicDistributionGroup DG_NH
Get-Recipient -RecipientPreviewFilter $DDG.RecipientFilter | FT alias
So I then delete this DG, and recreate it this time looking at the multi-value attribute ExtensionCustomAttribute2, as follows:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')}
Replaying the query above, I can see this also works fine and finds my two users.
Next I open a new powershell and connect to Office 365 and repeat the process there.
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')}
This correctly finds the 2 users when I query for them.
And then delete the group and recreate it using the multi-value attribute:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')}
When I run the query this time it produces no result. Every test I try results in an empty group if I am using a multi-valued attribute in the search criteria in the cloud. If I use single valued attribute, it works fine.
I really need to be able to get multi-valued DDG's working in the cloud. If anyone has done this and has any suggestions, I would appreciate seeing what you did. And if this is the wrong forum to port this, if you can point me to a more suitable
forum I will report there.
Thanks,
Richard

Dynamic Select List Allowed Values

Howdy Folks,
I am trying to allow end users to select their username. The usernames are generated from a rule library, and displayed in a select form element. I am doing this by having the allowedValues call the rule that generates the possible names directly. The rule returns a list of valid names. The problem I am currently having, is that if the page reloads or refreshes, then the allowedValues calls the rule again. Some of the username choices involve random numbers, so it is possible (and very likely), that separate calls to the rule will generate different potential values. So what is now happening, is that when a user selects the value, the page reloads, and the end user sees an error that looks like this:
( ) - Warning: Selected value for field 'Select a Valid User Name' does not match any of the allowed values.
The reason I am reloading the page, is that I am also trying to show the user what their email address will look like with the new value. So I have a different form element that is loading is value dynamically, and referencing the select form element. This mostly works, but the warning above is unacceptable.
Is there a way I can load the dynamically created list only once, the first time the form is viewed, and not load it again every time the page refreshes?
Another thing I tried to do (but didn't have luck with, so I sorta gave up on it) was to use the onChange of the select to change the value of email display field. This way the page never reloads and I don't have to deal with that issue. I'm thinking the onChange might actually work, but I would need to execute javascript or something, and not just use an express <set/> command to set the value of the field name that displays the email text.
Does anyone have advice on how to make the values only load once? Or how to change the value on the onChange event?
Thanks!
Jim

Mike,
Thanks for the feedback. I actually did try that eventually. I created a variable in the form, and initialized that variable to the list of possible values. Then I referenced the variable in the 'allowedValues' of the select form item. At that point in time I still had the select box set as an action, so it would reload the page, hoping to reload the value in the email display field. This still did not work. Each time the action fired off, the variable was re-initializing itself. I eventually tried to put in a check, so it would not re-initialize itself if it had already been initialized. That caused a syslog error.
I ended up solving the problem using javascript. I changed the field that reported the potential email address to an html element. Then for the html attribute I made a div with an ID. I then set a line of javascript into the onChange attribute of the select form element. This worked when ever the select form value changed. I then added the same line of javascript to the onLoad attribute of the jsp pages body element. This worked for loading the page.
This solved the problem of the page reloading and the select getting new values. That still happens if you actually reload the page, but all the form elements work without the reload now.
Thanks!
Jim

Report Viewer Dynamic Parameter List not showing a complete list of values

Hi, I have installed the crystal report runtime 13.0.1.220 for framework 4.0 in a 64-bit windows 7 professional server.
I have an aplication that opens crystal reports using the crystal report viewer control for visual studio 2010, also version 13.0.1.220.
ISSUE: The report opens fine, but it does not shows all the available values in the dynamic parameter list.
I have tried setting the MaxRowsetRecords registry key to diferent values but it does not work.
I do not have any crystal report stand alone version installed in my server.
Please help me?

Hi Ludek,
yes i followed the instructions of the KBase you are mentioning, but it isn't working for me.
I modified the following keys:
HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
and
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
1) I had to create the LOV key under the DatabaseOptions in both keys.
2) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
3) I restarted my server. Still not working.
4) Then after that i modified the following registry keys: (leaving the first 2 keys modified)
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
and
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\DatabaseOptions\LOV
5) Also had to create the LOV key under the DatabaseOptions in both keys.
6) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
7) Restarted my server. still not working
8) Then after that i modified the following registry key: (leaving the first 4 keys modified)
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\ReportView
Inside this key I created the DWORD PromptingLOVBatchSize and gave it a decimal value of 1000000
9) Restarted the server. Still not working. For crying out LOUD!!

How to create a dynamic entry list for an input field in VC(ce 7.1)

Hello all,
I have an Input field, i need to create a Dynamic Entry List for it in VC(ce 7.1).
How can this be done.
Thanks in Advance.
Thanks and Regards,
Santhosh Guptha N

Hi Santhosh,
You can define Dynamic entry list for Drop down list and combo box but not for input field.
[Refer this|http://help.sap.com/saphelp_nwce10/helpdata/en/2a/28249060dd4dbc872f6266f4557364/frameset.htm] for defining entry list.
Let me know if it helped.
Regards,
Dharmi

Creating a dynamic Selection List based on a View Object

Hello,
I'm new to JDeveloper and I would like to create a JSP Page with dynamic Selection List based on a runtime query or based on a view object (BC4J). The selection made by an user should serve another dynamic query with the necessary parameters that I built using createViewObjectFromQueryStmt(). By now I tried this using the InputSelectLOV from the Component Palette in JDeveloper. But without success. By the way: the selection list is not very large (5 values), so it's not necessary to have a form finding the desired value.
Maybe someone had experience about creating this already. Please give me a tip or a little example.
Thanks.

http://otn.oracle.com/products/jdev/howtos/jsp/renderers.html

Flex Table Add Row Issue with Dynamic Entry Lists

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

Display Dynamic Member List Variable value in the Header

Hi
In my HFR report im using a dynamic member list as DynList1(@POV) in the Entity Dimension; for HFM Application.
For the Entity Parameter im using User Prompt for Entity.
For the User Prompt im using a choice list of Four entity members. E1, E2,E3, E4.
I have 4 member lists ML_E1,ML_E2, ML_E3, ML_E4 such that ML_E1 contains few of the descendants of E1.
So wen i run the report i select E1 in the user prompt and the ML_E1 is used in the Report. This is working fine.
Now, i want to display the MemberName and Description of E1 in the Header.
Im not sure if it can be done. But wanted some confirmation from Hyperion Community on whther this can be done.If yes, please let me know how.
Thanks
Vibhuti

I tried to recreate the problem like listed above, but after I add the Outputcollection of the Invoke as a parameter, there is no schema info (not even task:task) when editing the Assignment and Routing Policy section. At any rate, there weren't errors to speak of - the instance completed with "The state of this instance is Completed".
In the meantime, I've used a while loop to loop through a sequence of approvers that are result of a query. I'll have to keep track of approvers and include them in each new payload I think.

Dynamic category list link to product list page not working

I have a dynamic catagory list that is populated from a mySQL db
<?php do { ?>
<li><a href="product-list.php?CatID=<?php echo $row_Recordset1['CatID']; ?>"><?php echo $row_Recordset1['CatName']; ?></a></li>
<?php } while ($row_Recordset1 = mysql_fetch_assoc($Recordset1)); ?>
im not sure if the aboive is correct?
i need to link it to the product page and just dispaly all the products in that catagory
the product-list php code is
$var1_Recordset1 = "-1";
if (isset($_GET['CatID'])) {
$var1_Recordset1 = $_GET['CatID'];
mysql_select_db($database_lotties, $lotties);
$query_Recordset1 = sprintf("SELECT * FROM lottieProducts, lottieCat WHERE lottieCat.CatID = lottieProducts.CatID AND lottieCat.CatID = %s", GetSQLValueString($var1_Recordset1, "int"));
$Recordset1 = mysql_query($query_Recordset1, $lotties) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
thanks in advance

done it
$varCat_rsProductData = "0";
if (isset($_GET["cat"])) {
$varCat_rsProductData = $_GET["cat"];
mysql_select_db($database_lotties, $lotties);
$query_rsProductData = sprintf("SELECT * FROM lottieProducts WHERE lottieProducts.CatID = %s", GetSQLValueString($varCat_rsProductData, "int"));
$rsProductData = mysql_query($query_rsProductData, $lotties) or die(mysql_error());
$row_rsProductData = mysql_fetch_assoc($rsProductData);
$totalRows_rsProductData = mysql_num_rows($rsProductData);
link from cat list
<a href="product-list.php?cat=<?php echo $row_Recordset1['CatID']; ?>"><?php echo $row_Recordset1['CatName']; ?></a>

How can i Create Dynamic mailing lists with Iplanet Delegated Administrator

Hello people,
Could anyone help me in this matter please?
I am running IMS5.2 with Netscape Directory4.16. I need help about how to create a Dynamic Mailing list using de Iplanet Delegated Administrator, not using the traditional Netscape Console.
If someone can help me, i will apreciate.
bye.
Azim Lakha

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

Dynamic Parameter List works on desktop but not when run on Crystal Server

Hi,
I have a report, and the database command query takes one parameter ({?Year}. There is a second parameter used for a record select which is a dynamic paramenter list (multiple select, required). When running the report from Crystal Reports 2008 on my desktop, it first prompts for a year, and then once that is entered, it will come back with the list (of Companies) to select from. It works very smootly and as desired.
But when I load this report to Crystal Reports 2008 Server, it will ask for the year (which is a static list), and this is good, but then it comes back with an empty dynamic select list on the next screen.
Are there any special caveats that I need to be aware of in regards to dynamic lists when running from the CR server?
Thanks!

Hi Pat,
This should work but a couple of things to check:
1) Are the two parameters linked to the same database? If the parameters are linked to fields from different tables in different databases then you need to make sure you set the Database Configuration and have the report log on to both databases.
2) Are Crystal Reports and Crystal Server the same version? I had problems with parameters after we upgraded to 2008. We had to install the latest service packs for both Crystal 2008 and the Enterprise Server. Then we installed Crystal 2008 on the same machine the Enterprise Server was on. Crystal Reports and the Enterprise Server share some common files. Some of those files were updated for Crystal but not for the Enterprise Server yet. Once we synched them our reports have run fine.
Good luck,
Brian

IMPORT from database with dynamic parameter list

Hi Gurus,
Iu2019m having problems during import from a cluster table.
I wanu2019t to do an import with a dynamic parameter list, but I cannot get it to work.
Sample code ********
DATA: BEGIN OF st_key,
report LIKE rsvar-report,
variant LIKE rsvar-variant,
END OF st_key.
DATA dirtab1 LIKE cdir OCCURS 10 WITH HEADER LINE.
DATA dirtab2 LIKE cdir OCCURS 10 WITH HEADER LINE.
st_key-report = 'ZPRG'.
st_key-variant = 'VAR1'.
IMPORT DIRECTORY INTO dirtab1 FROM DATABASE vari(vb) ID st_key.
IMPORT DIRECTORY INTO dirtab2 FROM DATABASE vari(va) ID st_key.
DATA: tmp_var(100) TYPE c.
This works - P_BWTAR is a parameter from the selection screen registred in VARI
I'm getting the content of the field in tmp_var
IMPORT p_bwtar TO tmp_var FROM DATABASE vari(va) ID st_key.
This does not work - the parameter P_BWTAR is in the dirtab2-name
I'm not getting the content
LOOP AT dirtab2.
IMPORT dirtab2-name FROM DATABASE vari(va) ID st_key.
ENDIF.
ENDLOOP.
I have tried the syntax IMPORT (dirtab2-name) ........
but this fails the syntax check.
Please - if you have any suggestions :o)
Best Regards,
Vibeke

Dear Vibeke,
Could you please explain us how you solved the problem because you have the same issue ?
thanks a lot
KR
véronique

Passing Range Parameter for BO Publication for Dynamic Recepient list

Hello,
We have a Crystal report on top of BEx and we are passing input values for the parameters using another Crystal Report.
We are trying to pass a date range from Dynamic Recipient List to date prompt under personalization.
The format in which we are trying to pass is "05/06/2010 : 09/22/2010" and we are getting the below error in log file:
Document for recipients {} failed: Internal error.
Document for recipients {} failed: Cannot Map Multiple Profile Values to a Single Parameter Field: {[ZOC_DATE]} in Report: ABC_VendorFiscal.
Document for recipients {} failed: Internal error. (FBE60502)
How do we the pass values to date range?
Regards,
Vishal

I came accross the same problem with BIP 4.0 and CR2011 on BW MDX.
By searching on the SAP notes I have found this one which is apparently only a workaround:
1544713
Kind regards,
Sylvain

Need solution for dynamic pick lists in Crystal Reports

Does anyone have a good solution for creating a dynamic pick list for a Crystal Report that is based off of a BW Query without having to use a BW user input variable? In many cases it is not practical to use a BW variable to generate a dynamic pick list due to the high number of possible member values and the highly dynamic nature of the particular characteristic (customers, materials, etc.). In my understanding the LOV Server is not an option when dealing with SAP BW. Anyone else running into this issue with Crystal and SAP BW?

Hi Mike,
we once solved this by creating LOVs in BusinessView Manager. I am not sure if you can use the BW Publisher in this scenario as we did not use it. We published the reports directly to the BOE server for some reasons.
Creating a LOV in BusinessView manager is really easy. You can create cascading prompts, shedule refreshing of the lists, ...
By using the cascading prompt feature you can make prompts like this:
First enter the customer number (or pick it from a list) and then the second list, which holds the materials only has shows the ones which had been purchased by that customer. I think this is what you are looking for.
You should give it a try!
Thorsten

Dynamic distribuition list?

Similar Messages

Maybe you are looking for