Dynamic Distribution Groups - Message Delivery Restrict to Security Group

Hi,
I have created a dynamic distribution group and want to restrict mail delivery to only accept messages from members of a security group.  How do I achieve this?
The idea is the DDG's are set with their criteria and if anyone leaves/joins the relevant SG then they will have permission to send to those DDG's.
Thanks in advance.

Hi ,
In exchange management console it is very simple to provide the access.Please follow steps.
1.Open the Exchange Management Console (EMC)
2.Locate the distribution list .
3.Right-click on it and select Properties
4.Open the Mail Flow Settings tab
4.Select Message Delivery Restrictions
5.Then select the option only senders in the following list and add the DL that you would like to provide access to send email to that group.
Thanks & Regards S.Nithyanandham

Similar Messages

  • Message Delivery Restrictions failed in Exchange 2010

    Hi everyone
    For a customer, I wanted to restrict the use of a distribution group so that only a few selected people can send to the list. When I tried adding these users under Mail Flow Settings -> Message Delivery Restrictions, it gave me the following error:
    Microsoft Exchange Error
    The following error(s) occurred while saving changes:
    Set-DistributionGroup
    Failed
    Error:
    Couldn't find object "<domain>/Users/Administrator". Please make sure that it was spelled correctly or specify a different object. Reason: The recipient <domain>/Users/Administrator isn't the expected type.
    OK
    I know of the problem when a user is disabled, but never have seen this one before. The administrator account is active and in use (I logged in with the administrator account to add the users).
    Anyone who knows what to do?
    Thanks!

    That's what the error is saying - the administrator account has no mailbox, and I suspect that the EMC expects the account you are placing in that area to have one.
    It's not the administrator that I want to add to the list, but the users of the board. But I'll try to create a mailbox for the administrator, for the sake of science :)
    Unfortunately not, that's what I thought at first too, but I double checked and no mailbox for the administrator can be found.
    Was the administrator account mail-enabled in the past however? I wonder if it was set as delegate or had send on behalf rights for one of the users you are trying to add and its ghost entry is still there.
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
    Any way how I can check this? As for as I know, the administrator account never had "send on behalf rights", but of course I don't know what they've been doing in all the time since I left. 

  • Message Delivery restrictions on users in database

    Hi, I want to remove all delivery restrictions for all users in a specific database. Does someone have a script to do this please? Server is Exchange 2013 and the database name is College. Thanks

    Hi,
    We can use the following command to remove message delivery restrictions for all users on a specific database.
    Get-Mailbox -database “College” | set-mailbox -AcceptMessagesOnlyFrom $null -AcceptMessagesOnlyFromDLMembers $null -RejectMessagesFrom $null -RejectMessagesFromDLMembers $null –RequireSenderAuthenticationEnabled
    $false
    Also we need to check what Willard Martin said.
    Best Regards.

  • My iPhone 4 will not send MMS or Group messages and the MMS and Group messages are on in the settings. Help?

    I keep getting the red mark "message failed" whenever i attempt to send a picture or forward. i checked my settings and MMS and Group messaging are both on. This has happened several times. Help!!!

    I've been an AT&T customer since they were under different names in the 90s and have never heard/seen that. I would check with them. I'd really like to see that error. To get a screenshot on the phone, press the home button and sleep/wake button together quickly and release. You will see the screen flash slightly and hear the camera shutter noise.

  • Why can't I send group messages, but I still receive group meesages

    It just started happening to me today and I made sure that both the "group message" and "iMessage" options are on under settings. Also, I am able to send iMessages individually just not in groups.

    Yes all of the options under settings are turned on like they should be

  • Message Delivery Restrictions on Distribution Groups setting "Require that all senders are authenticated" on newly created groups

    This is new behavior.  I recently decommissioned my Exchange 2003 server.  Could this have caused this new behavior?  If so, how do I ensure "Require that all senders are authenticated" is unchecked during group creation? 

    I don't believe there is a way to change the default.  You'll have to either go to the properties each time after you create the group and disable it. Or run the following powershell script after:
    Set-DistributionGroup GROUPNAME -RequireSenderAuthenticationEnabled $False
    Thanks, MikeV MCSE 2012

  • Can't add a mail enabled public folder to allowed senders on a mail universal security group in Exchange 2010

    Hello,
    I'm trying to allow a mail enabled public folder permissions to send to a mail universal security group. In the past if I wanted to add a PF as an allowed sender I would do it via the AuthOrig setting on that group using adsiedit.  I just noticed today
    that if I add the PFs DN to that attribute of the group, nothing happens.  No matter how long I wait the PF never shows up under the allowed senders list on the group. If you try and send as the PF you get a bounce about not being allowed to send to that
    group.  If I go back into AD and check, the PF is still listed under the AuthOrig attribute.  I tried this on a few different groups and with a few different PF and I'm stumped.  I think the last time I had to update this setting on a group
    was before I installed roll-up 5 for SP3. 
    If I do the same test with a user, it works as it should and they show up in the allowed senders list.  
    If I take a group that isn't restricted to specific senders and add a PF DN to the AuthOrig attribute of the group, the button in the message delivery restrictions for that group in the EMC will change from all senders to only senders in the following list,
    but the PF wont be listed in the box of allowed senders.  If I remove it from the AuthOrig attribute the group will change back to allow all senders.  It's really weird, so any help or light you can shed on this would be greatly appreciated. 
    -Mark

    Hello,
    I check many threads and articles, but there is no related information to verify the issue.
    If your purpose is that adding a mail-enabled public folder to allowed senders on a distribution group, there is a workaround method. You can create a new distribution group, and then add the public folder to the new distribution group, and add
    the new distribution group to the Only senders in the following list field of the target distribution group.
    Here is an article for your reference.
    http://support.microsoft.com/kb/2746885
    Cara Chen
    TechNet Community Support

  • How to create a security group to manage a Distribution list in exchange 2013

    Hi folks,
    We have AD synced with Online Exchange 2013. Dirsync is installed on AD. We would like to create a security group for a Distribution list(for instance: distribution list name is [email protected] and it is managed via a security group named "abc" ).
    How can this be achieved? I do see an option under Online Exchange console using browser-> Groups to create a new security group but it doesn't allow me to add the group created in AD-instead it ask us to create a new one. If we create a new one in Exchange
    online console- will it publish to our local AD?

    Hi TR,
    Thank you for your question.
    Are there any errors when we could not add group which is in local AD.
    When we could not add group which was created In AD, there are following options we could check:
    If current user who logon Exchange server has enough permission to add it
    The connection between Exchange server and AD
    If we create a new DG in Exchange online, it will be published to local AD.
    We could run the following command to create DG for abc.com:
    New-DistributionGroup -Name "abc" -Alias abc -Type "Security" -MemberJoinRestriction open
    We could refer to the following link to learn more about distribution group:
    https://technet.microsoft.com/en-us/library/bb124513%28v=exchg.150%29.aspx
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • No group message option in iMessage option in settings

    For some reason I don't have a group messaging option under iMessage options, I'm using a 5s and running ios 7.1.1

    The Group Message option is not an iMessage option, it is an MMS message option. It will disappear if you have MMS Messaging turned off. It is also possible that it could be related to your cellular carrier/plan. The following quotation is from http://support.apple.com/kb/HT5760
    The Group Messaging setting applies only to MMS messages.
    Your wireless carrier may restrict the maximum number of recipients allowed in a group message with MMS.
    Disabling Group Messaging has no effect on iMessage behavior. Responses to group iMessages are always sent to all recipients.
    Group messaging with MMS requires an appropriate plan from your carrier for use on iPhone.
    Carrier messaging rates may apply when using group messaging with MMS.

  • How to change mail-enabled security group to security group

    Hi,
    As a test I have configured on the properties page of a security group an email adres. By doing this converted a security group to a mail-enabled security group. Also this group has been transferd to Office 365. But after testing I want to make the distribution
    groups on the Exchange in Office 365. So I deleted the emaila dres of the security group, but it still synchronized to Office 365 as a mail-enabled security group. How can I change in AD the mail-enabled security group to a security group?
    Thanks in advance

    Hi StijnS,
    For the O365 question there are Office 365 technical forums available at
    http://community.office365.com/en-us/f/default.aspx.
    The related article:
    Office 365 Forum Assistant
    http://blogs.technet.com/b/neilhobson/archive/2011/09/20/office-365-forum-assistant.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I'm in a group message with 12 people. All are iPhone users, except for the token Galaxy user. I can receive messages, but I cannot send them. How can I fix this?

    Title says it all

    Hey kenth93939!
    Here is an article for you about group messages that has some helpful information and troubleshooting tips for this issue:
    iOS: Understanding group messaging
    http://support.apple.com/kb/HT5760
    The Group Messaging setting applies only to MMS messages.
    Your wireless carrier may restrict the maximum number of recipients allowed in a group message with MMS.
    Disabling Group Messaging has no effect on iMessage behavior. Responses to group iMessages are always sent to all recipients.
    Group messaging with MMS requires an appropriate plan from your carrier for use on iPhone.
    Carrier messaging rates may apply when using group messaging with MMS.
    Additional Information
    It is not possible to remove yourself from a group message.
    To add or remove recipients, you must create a new group message conversation.
    If you experience an issue with iMessage, SMS, or MMS messaging, try the steps outlined in this article.
    To learn more about SMS, MMS, and iMessage see iOS: Using Messages.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Security Group for SharePoint 2013 Online Enterprise 3

    I need to copy all the user account names from one SharePoint Security group to a different SharePoint Security group in the same single tenant.
    I can not figure out how to do this.
    Thanks.
    Dawn

    Call your local Microsoft office (any office may due, but info from your local office will be more accurate), and ask for the
    Account Manager for SMB (small to medium businesses) in the
    education sector.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • How many email addresses can I include in a group message on my mac email

    I am trying to send a group message on email.  My group has 130 addresses in it however my email will not send to all of them.  What is the maximum amount of email addresses you can include in a group for a successful transmission over email?

    It appears that your problem is due to your mail provider and not Mac Mail since this
    http://email.about.com/od/macosxmailtips/qt/How_to_Send_a_Message_to_a_Group_Fas t_in_Mac_OS_X_Mail.htm
    includes
    Note that most mail servers will reject messages that have too many — often over 50 or maybe 25 — recipients.
    For mailing larger groups easily, you can use a group mailing service.

  • SharePoint group containing AD security group - Check Permissions does not show correct information

    I'm seeing a problem with SharePoint 2013 groups that contain Active Directory security groups. When using the Check Permissions feature to see what permissions a specific user has, it does not reflect the correct permissions for a user inside of the AD
    security group. This occurs when checking permissions on a site, library, list or folder. When a user is added as a direct member of the SharePoint group it lists their proper permissions. I should note that the users ability to access the site or list works
    properly and coincides with the SP/AD group the user belongs to. It's only the Check Permissions that doesn't work. This does not happen with SharePoint 2010 and the Check Permissions tool is very useful. Any ideas?

    It's not wrong, it is expected behavior and working as designed. Until a user logs into the SharePoint site that is granted access via AD group, the user is not going to show under 'check permissions' as having access. SharePoint must have a record of the
    user in the UIL in order to validate their access.
    You're free to file an RFC with Microsoft, but the monetary impact to you must be extremely high in order for this behavior to be changed.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Are my group messages being sent as MMS instead of SMS?

    Hi there! I just have a quick question about text messaging on my iPhone. I read here (http://support.apple.com/kb/HT5760) that "some carries automatically convert group messages into MMS" and that "group messaging is sent either as an SMS or MMS"
    See, I am a new postpaid subscriber. And my plan only includes unlimited text messaging (SMS) and data use. I usually send out group messages to 50+ of my colleagues when I need to remind them about something or ask a question. Are these messages being sent as an MMS, or as regular text messages? I fear I may be getting charged hefty sums for texting.
    Thanks!

    Why don't you check with your carrier. They would be in a position to better answer that question than a group of users from all over the world.

Maybe you are looking for

  • Use of Oracle global temp table in BI Publisher

    Hi All, I have witten a function which populates a Gobal temp table.I call the function and do a select on the global temp table.This fails to give me any result. We are calling the function within the package in the 'beforeReport' trigger in our Dat

  • Creative Cloud desktop application does not load properly under Windows 8.1

    I'm having a very strange problem with the CC tool too. When I open it I just see an empty box with a smaller dialog inside it showing the icon. It won't close and I can't interact with any of the windows. The only way to get rid of it is to kill it

  • Acrobat Pro 9.4 and Touchup Object Tool

    Working on PDFs that were printed from AutoCAD. I am trying to select an  area to delete but it will not allow me to drag my selection box. . If I try to select a much larger area it will allow me to but this ends up selecting too much. This is not c

  • Report with material number and planned delivery time

    Is there any standard report with material number and planned delivery time ?

  • Movies not showing in shared library on Buffalo NAS

    Hi I have installed a Buffalo NAS with DNLA server active. I can see the shared libary within itunes on my MAC but only music files show in the library, non of the movie files are visible? Buffalo tech support suggest this is an itunes problem. anyon