Dynamic drill link is not working when i substitute some parameters in Plus

Hi Gurus,
Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
Thanks & Regards
Vikram

Hi Vikram
Oh gosh, me and my big mouth!
Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
Hope this helps
Regards
Michael

Similar Messages

ADF Tabe's Pagination link does not work when embedded in iframe

Hi experts,
When I embedded ADF table(with JSF) in iframe like below code, the pagination link does not work. Is it a known bug?
<iframe width=100% height=500 src="http://rst-act3ct2.us.oracle.com:8888/test/faces/modify.jspx" frameborder="0" scrolling="no"></iframe>
When I use <object> instead of <iframe>, the pagination works again. However, <object> could not be used in my project.
Any idea on it?
Thank you in advance.
Regards,
Tony

Hi,
if you are on JDeveloper 10.1.3 then chances are that the problem can be pointed back to the mismatch of HTML and JavaServer Faces. At least you should make sure you work with a recent JDeveloper 10.1.3 release
Frank

My flash links are not working when it is www request

Dear Friends,
We have done one application for the mobiles..in that we have used flash xml menu. In my xml menu i have mentioned the urls with www. request.
When its http://www.xyz.com menu links are not working.
If its http://xyz.com my menu links are working fine. Can you please suggest me once how can i achive this.

How did you fix it?

" send link" is not working , when click on it, nothing happens, but Firefox 4.0 will work

File --> Send link will not work after Update Firefox 4.0 to 8.0
It is happening all the time.
Before update, the 4.0 version will work.

File --> Send link will not work after Update Firefox 4.0 to 8.0
It is happening all the time.
Before update, the 4.0 version will work.

IRR dynamic action filter does not work when condition set.

Hi All
I've set up a filter on an Interactive report using a dynamic action. The fiilter is used to display records that expire within a term ( example 30,60,90 days.) The dynamic action is set to fire On Change. This all works fine as long as I do not set the report condition to only display when P1_DAYS is not null.
I am using a report template that includes #REGION_STATIC_ID# as referenced in this post -
http://anthonyrayner.blogspot.com/2010/07/report-filtering-with-apex-40-dynamic.html
I hoped not to display a blank report region .. wait until after the user selects the "term" before displaying the results. Any workaround suggestions would be appreciated.
Version -
Application Express 4.0.1.00.03
Thanks
MO

Kindly check the following link for reference.
sample configuration link
http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01110.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70intf.html
Trouble shooting link
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html

IWeb moves pictures by itself, links do not work when publishing to folder

When I first started using iWeb i would save the page I was working on and then publish it to a folder so I could look at it in Safari and it used to work fine. Now when I do this the pictures come up and they are pushed up halfway off of the top of the page and you aren't able to scroll down all the way to see the bottom of the background picture that I have. Also, the links to the other pages of the site do not work after publishing it to a folder. If anyone has any advice I would greatly appreciate it!
17" Powerbook G4 Mac OS X (10.4.6)

I uploaded it to a free host for now. here is the link: http://www.zendurl.com/garrett/cgi-bin/www.garrettramquist.com/Welcome.html

Captivate 5.5 project -links are not working when i publish to the IE server

I was wondering if someone had a solution to my Captivate 5.5 project with external links.
Here is my problem:
I have a page that has an external link that opens another window.
For some reason the window will open in preview. However, when I publish to the IE browser it does not work.
Does someone have a solution to this problem? I saw some verbiage that stated adjusting something swf file. I don't quite understand were to change this file. Is it in Captivate?
Any information you have is greatly appreciated.
Thank you!
Kat

Google for information about Flash Global Security.
It looks like you need to trust the publish folder location as a trusted location in your Flash Global Security settings.

Some links are not working when i click on them

I will click on a link and it loads and then nothing. The only way I can open it is to open link in new tab. This has been happening since the new updates. Very frustrating as I have to resort to Google Chrome in order to not have to deal with this. Lots of links will not open.

Nothing in header. Email from booking.com. Richard

Links are not working with Firefox and some other browsers

Hello,
On my site (iWeb08) I have some pictures of pieces of text as a link to another page of website.. but with some browsers the links doesn't work.
Also de links are very difficult to activate on the site.. What I mean is when you want to click the link.. you have to search with the cursor in stead of stand on the word and click to activate..
(hope that you understand what I mean, but my English is a bit difficult in English for me...)
Regards,
Jose

Jose,
It might be good to give us the link to your site so we can see for ourselves what is happening.
Phil

Urls do not work when I compose messages

My links do not work when I drag a website url to my new message or type it in (beginning with http). I can always click on links that I get from others but my links do not seem to "convert" when I send them out. There is an exception, my webpage signature always works.

Welcome To  Discussions charmarsh!
You may find the tips linked to below helpful.
How To Post A Link/URL In Apple Discussions
How To Create A Link To A Post Within A Thread
Have Fun!
ali b

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e

I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply

Links in pdf doc are not working when viewed in Reader 9, but works with Reader 8

Hello,
When I view a pdf document using Reader 8, the links in the document work. However, when another user views the pdf document using Reader 9, the links do not work for them. Any suggestions?

Are they hyper links or are they spelled out (http://...etc)?
If they are spelled out, it could be because the person using 9 needs to select "create links from URL" in Preferences>General>Basic Tools.

Form in Dynamic page not working when checkbox is used.

I have created a form using dynamic page. The form most have display fields and a checkbox field. When I check a box, it assigns 'Y' value and when unclick, it assign 'N' to the database field.
When I submit the form, the procedure which is supposed to save the form data never gets executed. Well, at least it says, page not found HTTP 404 error.
Interestingly if I make this field a text box and manually enter 'Y' or 'N', and then submit the form, the procedure is executed. Data gets saved.
Is the checkbox not supposed to be used for a database field because checkbox value can be assigned only using javascript and the procedure never get that value ?
Can you please tell me how to use a checkbox for a database field using dynamic page ?
thanks,
Mainak

Sharmila,
When I said, the form does not get submitted, I meant that the procedure does not work. The form gets submitted but the procedure does not work. It gives HTTP 404 error. That is what perplexes me. I am unable to understand why the procedure does not work when I click a checkbox.
May be you can make this work. I am hopeless about this.
Here is the code for the procedure sumbit_form:
NOTE: I ADDED TWO FIELDS CALLED PROMOT VARCHAR2(1), PROMOTID NUMBER(4) TO THE EMP TABLE AND CREATED A NEW TABLE CALLED PROMOTEMP. THIS IS A TEST CASE.
create or replace procedure sumbit_form
(p_empno IN portal30.wwv_utl_api_types.vc_arr, p_promot IN portal30.wwv_utl_api_types.vc_arr, p_action IN VARCHAR2)
is
begin
if p_action = 'save' then
for i in 1..p_empno.count LOOP
update scott.promotemp
set promot = p_promot(i)
where empno = p_empno(i);
END LOOP;
end if;
commit;
htp.p('<b>Saved Successfully</b>');
htp.p('<table border=1 bordercolor="red">');
for c1 in (select * from promotemp where promot='Y')
LOOP
htp.p('<tr><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.sal);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td></tr>');
end loop;
htp.p('</table>');
EXCEPTION
when others then
raise;
end;
Here is the code for the dynamic page.
<HTML>
<HEAD>
<TITLE>Promot Emp</TITLE>
<script language="JavaScript1.1">
function include(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements.type == 'checkbox') {
          if (thisform.elements[i].checked) {
               thisform.elements[i].value = 'Y'; }
          else { thisform.elements[i].value = 'N'; }
form.submit();
function show(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements[i].type == 'checkbox') {
          if (thisform.elements[i].value = 'Y') {
               thisform.elements[i].checked = true; }
          else { thisform.elements[i].checked = false; }
</script>
</HEAD>
<BODY>
<FORM action="scott.sumbit_form" method="post">
<table border=1 bordercolor="red">
<tr>
<td> </td>
<td>Name</td>
<td>Job</td>
<td>Manager</td>
<td>Hire Date</td>
<td>Commission</td>
<td>Department#</td>
<td>Include</td>
</tr>
<ORACLE>declare
i number;
begin
i := 0;
for c1 in (select * from scott.promotemp where promotid = :promotid)
loop
htp.p('<tr><td>');
htp.p('<input type="hidden" name="p_empno" value='||c1.empno||'>');
htp.p('</td><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.hiredate);
htp.p('</td><td>');
htp.p(c1.comm);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td><td>');
if (c1.promot = 'Y') then
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">Yes
<OPTION VALUE="N">No
</SELECT>');
else
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">No
<OPTION VALUE="Y">Yes
</SELECT>');
end if;
htp.p('</td></tr>');
end loop;
htp.p('</table>');
htp.p('<input type="submit" value="save" name="p_action">');
end;
</ORACLE>
</form>
</BODY>
</HTML>
thanks,
Mainak

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

I have not changed any of my preferences and they look like they are as I would have left them.
I tried resetting Firefox and deleting the preference file, no change.
By the way, I hate that the tabs are on top and not where they belong above the pages they are for. There should still be a way in Firefox to put them back without having to use an add-in.

Dynamic drill link is not working when i substitute some parameters in Plus

Similar Messages

Maybe you are looking for