Dynamic Entry List doesn't work correctly on Visual composer 7.3
Hi,
Well I create two Dynamic Drop dow list box in the model of Visual Composer 7.3 and I Linked the two Dinamic drop down boxes ( i.e. drop down box "country" is linked with drop down box "state"), where the 2nd drop down is populated by the entries of the 1st drop down by the help of a web service.
When i run the model and chose one item form the 1st drop down list, the 2nd drop down list work's fine but when i select again the 1st drop down list and change the item for another, the 2nd drop down list try to refresh the data and erase the descripcion of the item but don't erase the value of that item and when you select the 2nd again the value appears like another item to select..
Has any one experienced this problem and can help on this?
Thanks in advance AllenXP.
Hello,
Could you please send me a simple model that demonstrates the case you are talking about?
For your convinience I've create SAPMATS container. So you can upload the model example using this link:
https://sapmats-de.sap-ag.de/upload/index.cgi?id=XTGM95R7EH199IIGMCWJ6QK43592SXT1Z9CVCQ57D7QI8XRS8F
Thanks,
Talia
Similar Messages
-
EA6350 Device List Doesn't Work Correctly
Device list doesn't show all devices on the network. Some are shown OFFLINE when in fact they are ONLINE.
Other devices that are connected don't even show up at all.
For instance, I have 15 devices on the network, some wired and some wireless, but only 10 devices show in the device
list. The other devices have connectivity but never show in the device list.
Called support and was told to update firmware and reset the router. Tried all of that but to no avail.
The device list is still incorrect.
When will Linksys engineers fix the firmware?Make sure that your devices are set to obtain an automatic IP address. Check some of the devices which appeared on the list. It could be that some devices have multiple addresses listed below them, and if such is the case of your network, I suggest you inform Linksys Support about it.
-
Hi,
I want to use "dynamic entry list" to populate my drop down lists in VC screens. I need to do this through web services.
when i populate my drop down lists by using a BAPI, its working fine. Where as while using a web service system, its showing blank output. The web service when tested without mapping to drop-down list is showing output in VC.
Have any of you tried this before?Please post your experinece/ new ideas.
Thanks in advance,
Kavitha.Hi Kavitha,
we are facing a similar problem with BI Queries.
If you use SP10 this note might help:
Note 1009081 - dynamic entry list does not work for BI Queries
It is a problem error in flex compiler introduced in NW04S SPS10, it works fine in SPS9 and before.
Regards,
Lars -
In human task, dynamically assign group doesn't work
Oracle SOA 11.1.1.4
My bpel process invokes a human task.
On the human task Assignment tab, I assigned 3 users (by name), 1 group (by expression).
The group is configured in LDAP
When I tested the bpel process, I entered the group and other data required.
From the worklist app, I see the task listed. It is assigned to the 3 users, but not the dynamically passed-in group.
From the Audit trail, I saw all data I entered (include the group). Everything seems correct, but I still can’t make the dynamically-pass-group work.
If I assign the group by name in human task, it works fine.
The problem is: dynamically assign group doesn't work.
Please kindly advice.Yes, it is possible assign a group as participant of some human task, passing the group name as parameter.
I have tested just now.
It works pretty well in SOA 11.1.1.4 (BPEL or BPM).
Make sure add a data parameter in your human task definition and pass a valid group name to it.
At the Assignment tab, in the participants' list, add a group, data type by expression, and set the value to the right xpath expression to the corresponding parameter.
For example: /task:task/task:payload/task:group
If it is not working look the SOA log files, probably you'll find some information about the error there. Maybe there is some problem with your jazn.com configuration.
You can also test if there is something wrong related to the group name, trying to transfer some task to the same group by the worklist. -
Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer
All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
FreekHi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni -
X-fi Extreme Gamers not in IRQ list, doesn't work at all.
9X-fi Extreme Gamers not in IRQ list, doesn't work at all.O Lo mates,
my specs:
Intel C2D E8500
Gigabyte GA-EP45-DS3R
Club3D ATi 4870 52MB
2GB OCZ
2 WD Raptors connected to onboard raid controller
X-Fi in PCI slot
my problem:
The X-fi isn't working as it should. It's not getting detected in bios / POST so it can ofcourse not be working in any OS (currently running Win7 7068
I used to own a AMD 2500 / Asus A7N8X-E deluxe, and it used to work, but when I upgraded to a C2D E6600 / DFI Infinity it only showed up 3 times in my IRQ list / OS. This ofcourse is to blame to Creative, because they dont care about the PCI standard and didn't implement IRQ resource sharing in the Extreme Gamer card. After upgrading to my current setup (listed above) it's still not working at all, even though I tried disabling all onboard devices I dont use, and manually mapped IRQ channels to the PCI ports so they wouldnt share.
The X-fi is fine, I recently put it in another pc with another brand motherboard, and it was detected instantly. Guess the guy who owns that pc had some luck with his motherboard don't feeling the need to share IRQ's at that particulair moment... its like Russian roulette.
Is there anything i can do to get the soundcard to work even though it doesn't implement the PCI standards and therefore in my opinion failed as a soundcard and as a brand as a whole?
Greats,
eXistenZ
Message Edited by existenZNL on 06-24-2009 02:34 PMMessage Edited by existenZNL on 06-24-2009 02:35 [email protected]= Hey mate:
Havent seen your exact bios, but if you have a setting in it, called? reset [color="#000080" size="3">Extended System Configuration Data.
Then that might shuffle your bios, per se and then let that card be redetected. I used to use that on my systems when swapping one single part in order to get all the IRQs to shuffle around again, and give one to my card. Do you remember when the magic number to give to your Creative card was IRQ 5, DMA Low of , DMA High of 5, address of 220 and port of 330? Well that is how I used to get my system to shuffle my printer ports and modems in order to bump that sound card to get the correct addresses. Also check to see if the edges of your sound card are blackened. Wipe them with your fingers and see if there is an ashy burned residue. This will tell you if that card has been electrically damaged, or oily/dirty. Also the backlplates on some sound cards are slightly bent and your sound card will fit into its slot, but not all the way. A hair off and that card will be picked by your system every couple of boots.
Try this and let me know how it goes for you. -
AddChild doesn't work correctly in 11.9
comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows 7 IE debug version and I see no script errors
Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
(Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the bug URL and I'll investigate internally.
-
Flex Table Add Row Issue with Dynamic Entry Lists
All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
FreekHi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni -
Dynamic entry list used in a table column
On a form, we noticed a dynamic entry list will limit which values a user may enter by validating against the entry list values. We need to have the same validation occur when a dynamic entry list is used in a table column. Has anyone had success in getting the dynamic entry list to validate the cell values in a table column?
Hey Dan,
You are right.... Its a bug... we are also using VC CE 7.1 SP 05....
When I try in form (with combo box) its working fine...I mean its giving error saying "Character string "4" does not exist in the allowed set of values and its not forwarding any values...
but when I use it in table, its not giving any error.
I saw some demos where it was working fine... but those are older sp versions of CE 7.1...
Try to contact SAP VC team on this....
PradeeP
Edited by: pradeep bondla on Oct 6, 2010 12:06 AM -
Java Web service and dynamic entry list
Hello,
In my VC mode, I have a combo box with a dynamic entry list. This entry list call a web service function which the source is :
public EntryListBean[] getEntryList() {
EntryListBean[] liste = new EntryListBean[2];
liste[0] = new EntryListBean();
liste[0].setText("1");
liste[0].setValue("Liste 1");
liste[1] = new EntryListBean();
liste[2].setText("2");
liste[1].setValue("Liste 2");
return liste;
In output port, i have:
VALUE -
> @value
TEXT -
> @text
When i test this function with 'Test Data Service', it work but when i deploy the model, there is nothing in the combo box. Do you have the same problem ?
I have installed NWDW v7.0 SP9 with Visual Composer patch 2.
RegardsHi Francois,
Did u try using dynamic entry list with a BAPI. Is that working fine?
Actually, I faced the same problem. I used a drop-down list, in which dynamic entry list works fine in case of a BAPI and appears blank in case of a webservice. I applied the latest patch files mentioned in a SAP note. People in forum asked me to do that. Its mentioned in the note that, "Dynamic entry list with webservice bug is fixed in the released patch file". But even after applying the latest patch files, it did not work for me. So, i think this bug is yet to be fixed.
Regards,
Kavitha. -
Hi All,
I'm trying to create a dynamic entry list based on JDBC stored procedure (SP).
While configuring the output parameters I don't see any of the output fields of the SP.
Any advice would be appreciated,
AviadYes, you're right. This is because VC doesn't know the fields of the stored procedure until you test it, but it has to be done separately for each usage of the stored procedure, and you can't do it for entry lists.
There is a workaround for it though.
Wrap the store procedure with a service: create a service in the same DC (from the New Model dialog), drag the stored procedure to the service, test it and add the fields, and from the stored procedure drag data in and data out for all its ports. Then use that service in the entry list (when you define the entry list, choose "Visual Composer Models" in "search in").
Best regards,
Tal. -
Link on my website doesn't work correctly on my iMac. It works okay when using Safari. It also works correctly on my laptop using either browser.
We worked out my problem. My solution turned out to be: Firefox Preferences/Applications. Scroll down until you find "Portable Document Format (application)", click on it and use the dropdown menu to the right and changed "Save file" to "Use Adobe Acrobat Pro (default). I had trouble at first finding if the listing was under Adobe, Acrobat, or what so I used the search feature and found it immediately.
Hope this helps. -
Game Center doesn't work correctly
Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
I've restored my device several times, but it didn't help.
How to solve it?I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
Other than waiting for Apple to fix it I don't think there is a solution. -
How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.
Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work. -
IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords
iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz
It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
report to Apple - iPhoto menu ==> provide iPhoto feedback
LN
Maybe you are looking for
-
I have successfully installed itunes 10, then get an error message that reads, itunes was not installed correctly Error 7 (Windows error 127)
-
Stack size for native thread attaching to JVM
All: I have a native thread (see below, FailoverCallbackThread) that attaches to the JVM and does a Java call through JNI. The stack size for the native thread is 256KB. at psiUserStackBangNow+112()@0x20000000007a96d0 at psiGuessUserStackBounds+320()
-
When I click on Bookmarks there is no Organize Bookmarks selection which your help told me to go to.
-
Hi, I am trying to sync my mobile phone via isync on newest mac lion and there is a problem: there is only the option to sync 'all contacts'. I'd like only to sync one specific group in the adress book. Before the newest lion it was possible to chose
-
How can i get Messenger to work or do i have to download parallel
How can i get Messenger to work or do i have to download parallel