Dynamic Environment Parameters

Hi
I need help when moving my reports from my development environment to my production environment. I do not want to hard code my server name etc. The reports integration documentation says that the first report request will start up the reports server, with no need for a name. This then becomes the in-process server. However when I omit this parameter from my call to the rp2rro.pll package it fails. Is there a solution that I do not have to hardcode my server name and node?
Regards
Leon

This is what I do in my forms. I do code the name of an RAD for my report integration, and then it simply becomes creating that RAD in the OID (SSO) on the deployed (target) iAS server. I do not hardcode the server name in forms or reports. The RAD and the SSO solves that issue automatically. I distribute my forms and reports binaries to multiple sites and then they distribute them on their intranets by using this method. Of course every application is site specific, so this might not apply to your case, but I thought it might be helpful.
R/ Zafer

Similar Messages

Dynamic Environment Switching For REPORTS_PATH 11g

Oracle Fusion Middleware 11.1.1.2.0 with Patch Set 2 (11.1.1.3.0) - Linux
Dynamic Environment Switching For REPORTS_PATH doesn't work.
According to documentation B32121-03 (Publishing Reports to the Web with Oracle Reports Services 11g Release 1 (11.1.1) point 8.2.2):
1. comment REPORTS_PATH in reports.sh
2. set enviroment settings in rwserver.conf with REPORTS_PATH and NLS_LANG and defaultEnvId (DEV and PRD with defaultEnvId="DEV")
3. restart reports server
4. run http://mywls:8888/reports/rwservlet?SERVER=rep_wls_reports_mywls_asinst_1&REPORT=testreport.rdf&USERID=user/user1@mydb&DESFORMAT=html&DESTYPE=cache&ENVID=DEV
REP-110: File testreport.rdf cannot be opened.
REP-1070: An error occurred while opening or saving a document.
REP-0110: File testreport.rdf cannot be opened.
The same situation for &ENVID=PRD or without ENVID (as I expect it should work as default - DEV enviroment). File testreport.rdf is located in both paths (/u00/DEV/reports and /u00/PRD/reports)
http://mywls:8888/reports/rwservlet/showenv?server=rep_wls_reports_mywls_asinst_1&authid=oiduser/oiduser1 reads informations from reports.sh file but doesn't read enviroment settings from rwserver.conf (REPORTS_PATH is empty because I comment it in reports.sh).
Where's my problem? Should I set any other setting(s)?
Unfortunately note [231051.1] and other referenced doesn't resolve my problem...
Edited by: user9093781 on 2011-08-23 06:50

Not sure if this helps at all. I just went through a nightmare trying to get 11g forms/reports to work through the forms builder.
What I discovered with that is that I indeed had to set the REPORTS_PATH in rwserver.conf... however there were 3 different files that I ended up having to put it in (not sure if had to be in all 3). And perhaps more importantly, there seems to be an order to how you put these xml statements in the rwserver.conf files.
In my case, it wouldn't work at all until I put it right after the last "<engine id=" statement.
Mine looks something like this (not that this is a snippet of the file in Windows, for running via Forms/Reports Builder):
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" maxEngine="1" minEngine="0" engLife="50"/>
<environment id="default">
     <envVariable value="C:\Oracle\WLS11gR1U4\user_projects\domains\AISworkstation\" name="REPORTS_PATH"/>
     <envVariable value="AMERICAN_AMERICA.WE8ISO8859P1" name="NLS_LANG"/>
     <envVariable value="RRRR-MM-DD" name="NLS_DATE_FORMAT"/>
</environment>
<environment id="windev_xxxxxxxx">
<envVariable name="REPORTS_PATH"
value="M:\ADS\Dvlprs\xxxxxxx\11g\FormsApps\stage;M:\ADS\Dvlprs\xxxxxxx\11g\FormsApps"/>
</environment>
I'm still figuring this all out too (although I did get it working how I need.. just not sure if it is the optimal solution), so I'm not sure how much this will help you. But for sure I can say that there is an order to these XML tags that I'm not so sure was the same (or maybe not enforced) in 10g.
Good luck

Dynamic Cascading Parameters - cannot select/enter parameter value

I am rather new working with Crystal Reports and am having problems with Dynamic Cascading Parameters.
I am using CR 2008 SP2, Version 12.2.0.290. Data is from SQL server.
I have a report to print labels for parts in an order. I want to be able to enter the ShipTo ID then the contract number. From there I would like a list of the parts on the contract and be able to select multiple parts to print labels for.
I right clicked on Parameter Fields and chose New. I named it ShipToContractPartNo, Type String, List of Values=Dynamic.
I added the values as follows:
ShipToID - Editable, Allow Multiple=False, Allow Discrete=True (cannot be changed), Allow Range=False
...ContractNo - Allow Multiple=False, Allow Discrete=True (cannot be changed), Allow Range=False
... ...CustPartNo - Allow Multiple=True Allow Discrete=True (cannot be changed), Allow Range=False
I added the Customer Part parameter to the label.
When I test the label the parameter Enter Values window looks good but the drop down for Enter ShipToID does not have any ShipTo ID's to choose from and I cannot enter a value, therefore I cannot continue. I also do not have a Cancel button and always have to end through Task Manager but that's probably a different, unrelated issue.
I have tried this with and without entering Select Expert records.
Could someone please tell me if I have missed a step or if there is a known issue? I searched this site, I looked in CR Help, I referred to the book I have and I googled but have not found this speciic issue.
Thanks in advance for your assistance. Let me know if additional information is necessary.
Jan

OK. I have rejoined/relinked all my tablesas follows (with abbreviated names for ease of reading). The actual SQL is at the end.
..Job_Hdr JOINED to Job_Shipto
.....Job_Shipto JOINED to Job_Line
........Job_Line JOINED to Job_Bin
............Job_Line JOINED to Inv_Mast
When I create a Dynamic Cascading Parameter prompt on just ContractNo (parent - from table Job_Hdr) and ShipTo (child - from table Job_ShipTo) then it gives me list of Contracts to select from and then a list of ShipTo's for that Contract to select from. I place them in the Report Header. I do not add them to the Select Expert. This works great.
Now I need to be able to select the parts necessary from the Contract/ShipTo. When I try to create a Dynamic Cascading Parameter with ContractNo and ShipTo (set up the same as above) and add in ContractPartNumber (from table Job_Bin) to the parameter then my ContractNo and ShipTo parameters no longer work. It gives me only 1 contract number to choose from, which isn't the one I want.
I have tried so many different things and I cannot get the parameters to work when I try to add PartNo into the parameters.
Any suggestions now?
Jan
SELECT "p21_view_inv_mast"."item_desc", "p21_view_job_price_line"."customer_part_no", "p21_view_job_price_hdr"."contract_no", "p21_view_job_price_bin"."min_qty", "p21_view_job_price_bin"."reorder_qty", "p21_view_job_price_bin"."line_station", "p21_view_job_price_line"."row_status_flag", "p21_view_job_price_bin"."line_feed", "p21_view_job_price_bin"."row_status_flag", "p21_view_job_price_bin"."contract_bin_id"
FROM ((("Prophet21"."dbo"."p21_view_job_price_hdr" "p21_view_job_price_hdr"
INNER JOIN "Prophet21"."dbo"."p21_view_job_price_customer_shipto" "p21_view_job_price_customer_shipto" ON "p21_view_job_price_hdr"."job_price_hdr_uid"="p21_view_job_price_customer_shipto"."job_price_hdr_uid")
INNER JOIN "Prophet21"."dbo"."p21_view_job_price_line" "p21_view_job_price_line" ON "p21_view_job_price_customer_shipto"."job_price_hdr_uid"="p21_view_job_price_line"."job_price_hdr_uid")
INNER JOIN "Prophet21"."dbo"."p21_view_job_price_bin" "p21_view_job_price_bin" ON ("p21_view_job_price_customer_shipto"."ship_to_id"="p21_view_job_price_bin"."ship_to_id") AND ("p21_view_job_price_line"."job_price_line_uid"="p21_view_job_price_bin"."job_price_line_uid"))
INNER JOIN "Prophet21"."dbo"."p21_view_inv_mast" "p21_view_inv_mast" ON "p21_view_job_price_line"."inv_mast_uid"="p21_view_inv_mast"."inv_mast_uid"
WHERE "p21_view_job_price_bin"."row_status_flag"=704 AND "p21_view_job_price_line"."row_status_flag"=704
ORDER BY "p21_view_job_price_bin"."line_feed", "p21_view_job_price_bin"."line_station"

Need information on Environment Parameters in EH&S

Hi Friends,
I am working on an application related to EH&S. I need to create a new environment parameter in EH&S for the Email ID and send the mail from program to that Email ID assigned to the environment parameter. I do not know any thing about the environment parameters in EH&S. Kindly guide me in doing this.
Thanks in advance,
Ram

Hello Ram
regarding "environment parameters" there might be one "disadvantage". If you would have the need to change the parameter you need a transport. May be there are other useful options which could be of interest:
As you may be now you can store user dependent parameters on the level of the SAP user. One example is:
You (as the user) can select a property tree. This selection of a property tree can be stored on userid level (therefore if you log off and log on once again the selection property is your "default" one,)l. Regarding this option you do not need a customizing parameter. The "cons" of this options are:
a.) you must prepare this "parameter" like a constant in your program to be read from user profile
b.) you should make sure that the user can only select from a number of values or if the user is using a value which is not allowed you need some "error" handling routine
So may be this option is not so "robust" but is used very often in SAP and in SAP EH&S.
With best regards
C.B.

Changing dynamic profile-parameters in batch

Hello,
want to change dynamic profile parameters (rdisp/btctime) in batch.
I know that i can change this in Transaction RZ11 - but i must change it, depending on our
batchstrategy in the night.
best way for me - is to change it via batchprogram - with variant 'parameter' - 'value'.
thank you for help
best regards
L.Misof
R&S

Hi,
why don't you use the operation modes for increasing batch work processes in night ?
Thanks
Sunny

Dynamic bind parameters failure

Hi
Ive dynamically bind parameters in view object
JHeadstart 10.1.2.0 (build 19). The data is getting bind. But with the following error. Kindly help me.
regards
Jayashri
17:30:42 DEBUG (JhsDataAction) -ViewObject programView1: value of bind param 0 set to 04
17:30:42 DEBUG (JhsDataAction) -ViewObject programView1: value of bind param 1 set to BORE
17:30:42 DEBUG (JhsDataAction) -ViewObject programView1: executing query, bind parameter values have changed
05/04/01 17:30:43 java.sql.SQLException: Missing IN or OUT parameter at index:: 1
05/04/01 17:30:43      at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
05/04/01 17:30:43      at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
05/04/01 17:30:43      at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1552)
05/04/01 17:30:43      at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2896)
05/04/01 17:30:43      at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2942)
05/04/01 17:30:43      at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:691)
05/04/01 17:30:43      at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:547)
05/04/01 17:30:43      at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3422)
05/04/01 17:30:43      at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:663)
05/04/01 17:30:43      at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:769)
05/04/01 17:30:43      at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:706)
05/04/01 17:30:43      at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3361)
05/04/01 17:30:43      at oracle.adf.model.bc4j.DCJboDataControl.executeIteratorBindingIfNeeded(DCJboDataControl.java:803)
05/04/01 17:30:43      at oracle.adf.model.binding.DCIteratorBinding.executeQueryIfNeeded(DCIteratorBinding.java:1587)
05/04/01 17:30:43      at oracle.adf.model.binding.DCBindingContainer.refreshControl(DCBindingContainer.java:1544)
05/04/01 17:30:43      at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.applyIterBindParams(JhsDataAction.java:2785)
05/04/01 17:30:43      at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.prepareModel(JhsDataAction.java:3136)
05/04/01 17:30:43      at oracle.adf.controller.struts.actions.DataAction.prepareModel(DataAction.java:486)
05/04/01 17:30:43      at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:105)
05/04/01 17:30:43      at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:223)
05/04/01 17:30:43      at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.handleLifecycle(JhsDataAction.java:389)
05/04/01 17:30:43      at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:155)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
05/04/01 17:30:43      at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
05/04/01 17:30:43      at oracle.jheadstart.controller.strutsadf.JhsActionServlet.process(JhsActionServlet.java:127)
05/04/01 17:30:43      at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:509)
05/04/01 17:30:43      at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
05/04/01 17:30:43      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
05/04/01 17:30:43      at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
05/04/01 17:30:43      at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
05/04/01 17:30:43      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
05/04/01 17:30:43      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
05/04/01 17:30:43      at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:220)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1012)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:582)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:260)
05/04/01 17:30:43      at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
05/04/01 17:30:43      at oracle.jheadstart.controller.strutsadf.JhsActionServlet.process(JhsActionServlet.java:127)
05/04/01 17:30:43      at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:509)
05/04/01 17:30:43      at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
05/04/01 17:30:43      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
05/04/01 17:30:43      at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
05/04/01 17:30:43      at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
05/04/01 17:30:43      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
05/04/01 17:30:43      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
05/04/01 17:30:43      at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:220)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1012)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:582)
05/04/01 17:30:43      at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:260)
05/04/01 17:30:43      at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
05/04/01 17:30:43      at oracle.jheadstart.controller.strutsadf.JhsActionServlet.process(JhsActionServlet.java:127)
05/04/01 17:30:43      at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:509)
05/04/01 17:30:43      at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
05/04/01 17:30:43      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
05/04/01 17:30:43      at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
05/04/01 17:30:43      at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
05/04/01 17:30:43      at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
05/04/01 17:30:43      at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)
05/04/01 17:30:43      at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
05/04/01 17:30:43      at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)
05/04/01 17:30:43      at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
05/04/01 17:30:44      at oracle.jheadstart.controller.CharacterEncodingFilter.doFilter(CharacterEncodingFilter.java:172)
05/04/01 17:30:44      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645)
05/04/01 17:30:44      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
17:30:44 DEBUG (JhsDataAction) -ViewObject programView1: bind parameter values have not changed
05/04/01 17:30:44      at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
05/04/01 17:30:44      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
05/04/01 17:30:44      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
05/04/01 17:30:44      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
05/04/01 17:30:44      at java.lang.Thread.run(Thread.java:534)

Hi Stevan
I'm using JSP.
Ive used request parameters for binding in the where clause {app_cycle=:1 and college_code='MICH'}in application structure i gave ${param.appcycle},${param.collegecode} , which the page is loaded successfully. Dont know how did that error got cleared. Anyway now session is the problem.
I want to use session and not request parameters.
How to achieve this. I dont understand the help give in the query bind parameters tab in application structure file. It says ${MyObject.MyParameter}
in Jsp session is the object. Assuming that i gave ${session.appcyle} where appcycle is the parameter which holds the value. But it didnt work
Kindly help on this.
regards
Jayashri
regards
Jayashri

Dynamic profile parameters

Hi
I would like to get all the list of dynamic profile parameters at R/3 level.
Could anyone please let me know if there is any OSS note availabe which lists out all the dynamic parameters? I tried but,couldn`t find the related ones.
Is there any way to find out from R/3 level?
regards,
Vinodh.

Dear Vinod,
There is a table called TPFYPROPTY which lists you all the dynamically switchable parameters identified by dynamic indicator. you can view this table using transaction se16.
you can also get into Rz11 and check the dynamically switchable check box value for that corresponding parameter.
Reward points if useful.
Sree

Environment Parameters

Hi all,
1. Is there any SAP documentation link that provides a comprehensive list of all the Environment Parameters with explanations
and
2. How to find what parameters are available for a Release, i guess these are release dependent?
Thanks
Praveen

Hello Praveen
1.) I do not know a link providing this info; sorry (even on marketplace their is nothing similar to my knowlegde) (keep in mind: now we have the SAP EHS management with a large number of submodules; I would assume that you will get something at least of 200 customizing parameters)
2.) best option is to use the docu of SPRO (it is quite good)
3.) next option: most of the parameters are defined in "includes" in EH&S (e.g. in package CBUI and others). But they are not explained in the code (or include),; therefore their use is in some sense "sophisticated" and there are many inlcudes to take a look in (eg. package CBRC does have separate includes ....)
Regarding: you question:
2. How to find what parameters are available for a Release, i guess these are release dependent?
Yes they are release dependent (and may be dependet on activation of business functions). I do not know an overview docu regarding this topic; sometimes in the master data set up documents of SAP EH&S they are mentioned (especially if changes have occured
With best regards
C.B.
PS: by hazard I found these reports in internet:
RC1A1F01 SAP Report - EHS: Constants for Environment Variables
RC1A1F02 SAP Report - EHS: Constants for Environment Variables
RC1A1F03 SAP Report - EHS: Constants for Environment Variables
RC1A2F05 SAP Report - EHS: Constants for Environment Variables
RC1A2F06 SAP Report - EHS: Constants for Environment Variables
As I have never used these reports; may be they are useful; don't know
Here are examples of docus which are available regarding env. parameters:
http://help.sap.com/saphelp_470/helpdata/ru/4d/7d0a3aec6f3b42e10000000a11402f/content.htm
Edited by: Christoph Bergemann on Jun 13, 2011 9:43 PM
Edited by: Christoph Bergemann on Jun 13, 2011 9:43 PM
Edited by: Christoph Bergemann on Jun 13, 2011 9:44 PM
Edited by: Christoph Bergemann on Jun 13, 2011 9:45 PM
Edited by: Christoph Bergemann on Jun 13, 2011 9:50 PM
Edited by: Christoph Bergemann on Jun 13, 2011 9:54 PM
Edited by: Christoph Bergemann on Jun 13, 2011 9:55 PM

How to create objects dynamically (with dynamic # of parameters)

I need to create a set of objects based on a definition from an XML file (obtained from the server) and add them to my scene.
I understand how to create the object using getDefinitionByName (and the limitations regarding classes needing to be referenced to be loaded into the SWF).
But some objects require parameters for the constructor, and some don't. The XML can easily pass in the required parameter information, but I can't figure out how to create a new object with a dynamic set of arguments (something akin to using the Function.call(obj, argsArray) method.
For example, I need something like this to work:
var mc=new (getDefinitionByName(str) as Class).call(thisNewThing, argsArray)
Currently this is as far as I can get:
var mc=new (getDefinitionByName(str) as Class)(static, list, of, arguments)
Thoughts?

I think what Dave is asking is a bit different.
He's wanting to know how to invoke the constructor of an object dynamically (when he only knows the # of constructor arguments at runtime).
This class I know will do it but seems to be a hack:
http://code.google.com/p/jsinterface/source/browse/trunk/source/core/aw/utils/ClassUtils.a s?spec=svn12&r=12
See the 'call' method, which first counts the # of arguments then invokes one of 'n' construction methods based on the number of constructor args.
I've yet to find a clean AS3 way of doing things ala 'call' though.
-Corey

Dynamic Configuration Parameters - FileName

Hi to ALL.
I have a File(EDI) to File(XML) scenario and I use seeburger . I want to get the source file timestamp . I made UDF with dynamic configuration and actived parameters on sender channel. (Source file timeStamp)
My problem is the I can't get the value because the configuration with seeburguer use the channel split (EDI).
On sxi_monitor I see two records one is for Functional Acknow. and the other is for the interface.
On the first record I see the value but in the second ( when the mapping is procesing) the dynamic value refill with anothers values from Seeburger.(file converted to XML)
I get this values from dynamic configuration ()
SAP:Record namespace="http://seeburger.com/xi/Split997" name="maxSplitNumber">1</SAP:Record>
<SAP:Record namespace="http://seeburger.com/xi/Split997" name="splitSender">YYYYY</SAP:Record>
<SAP:Record namespace="http://seeburger.com/xi/Split997" name="splitState">ACCEPTED</SAP:Record>
<SAP:Record namespace="http://seeburger.com/xi/Split997" name="splitMapping">XXX_E2X_ANSIX12_XXXX</SAP:Record>
<SAP:Record namespace="http://seeburger.com/xi/Split997" name="actSplitNumber">1</SAP:Record>
</SAP:DynamicConfiguration>

Hi Luis,
you can use the parameter "attributeCopyList" with the Splitter Module
With this parameter you can copy Dynamic Attributes across to your new channel.
For example, if you want to copy the attribute "test1" with the namespace "http://sap.com/xi/test",
the value for attributeCopy List is "http://sap.com/xi/test/test1"
So your module chain might look like this:
ModuleKey: splitter
ParameterName: attributeCopyList
ParameterValue: http://sap.com/xi/test/test1
Each new "Split-File" will then have the Dynamic Attribute http://sap.com/xi/test with value "test1"
regards,
Daniel

How to configure HTTP receiver comm channel with dynamic URL parameters?

I need to perform HTTP Post using PI. URL contains some parameters. I need to set these parameters with different values in run time.
Please help to do this.
Thanks
Ranji

Check the section Adapter Specific Message Attributes from this help section:
http://help.sap.com/saphelp_nw70/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
The parameters can be set in the Message Mappinga nd then using the appropriate options in communication they can be included in the message header....for more info search with keywords "Dynamic Configuration" and you will get to know how the procedure works.
Regards,
Abhishek.

Ho wto Dynamically Pass Parameters to a Query in Discoverer

Hi All,
I have a Query where I would to like to pass the Parameters Dynamically.In my query I have three selects and two UNION ALL's.In the three selects I have to pass Period & Year Parameters.In Each Select the Period Calculation is Different.Say in first & second select from the passed period parameter I calculate the previous Months.Whereas in the last select I do the the calculation with the Passed Period.How is it Possible with Discoverer..
Thnx in Advance
Rgds,
Sai Srivatshav

Hi,
Well there is no straight forward way to do that.
There is a work around to get that functionality by using outer tables or context.
Take a look at the following posts:
Re: Parameters in SubQuery
Re: Parameters in Discoverer Administration
Re: Passing multiple parameters into Custom Folder...

Passing dynamic selection parameters for fagll03 transaction

hi experts,
im trying to call a transaction ( fagll03) in my report with the input parameters via selection screen (using SUBMIT ) , but iwant to pass the profit center values to the transaction fagll03 , but the profit center is in dynamic selection , i just tried with some code , but it is not working, can any one just tell me briefly how to pass the profit center variable to the dynamic selection screen in fagll03. if u have any code please update me , it will be more useful.
Regards,
Venkat.

Look at FM FREE_SELECTIONS_RANGE_2_EX which will build the correct parameter to use in the WITH FREE SELECTION option.
First read Abap documentation at SAP online help [WITH FREE SELECTIONS texpr |http://help.sap.com/abapdocu/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm#!ABAP_ADDITION_5@5@] in [SUBMIT - selscreen_parameters|http://help.sap.com/abapdocu/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm] of [SUBMIT|http://help.sap.com/abapdocu/en/ABAPSUBMIT.htm] (or press F1 on SUBMIT)
Also look if those notes are relevant for your system
- [Note 965988 - FAGLL03: 'Dynamic selections' are ignored|https://service.sap.com/sap/support/notes/965988]
- [Note 1105201 - FAGLL03: 'Custom selections' are ignored|https://service.sap.com/sap/support/notes/1105201]
Regards,
Raymond

Dynamic commandline parameters

Greetings,
I have developed a custom client side application that is used to upload a data file to a servlet and have the servlet convert the document to an internal data format and send back the file name to the client. The client then uses this filename to launch the native browser with a servlet URL that includes the filename parameter so the user can use our webapp with prepopulated data.
This client app is called my multiple vendor's applications and requires commandline parameters indicating which vendor is sending the file as well as the filename argument. This is so:
1) I can read the file off of the users disk and stream it to the server via http.
2) I know what conversion to perform on the file once it gets there (file data types vary significantly by vendor).
I'm curious about the advantages of using JWS for this app as it is difficult to distribute changes to our application, though they occur infrequently.
I can see a solution to the problem of passing the vendor argument by deploying different versions of the JWS app with different arguments in the JNLP file and giving each vendor a different url but I am not sure how to handle the filename issue. The filename is created dynamically by the vendor application and passed when the client application is invoked.
Is there a way to specify commandline arguments dynamically to JWS? A search through the forum seems to indicate no.
Is there another way to dynamically do this? Is it feasible to invoke a the jnlp servlet via JWS and pass it a parameter and have it dynamically generate the JNLP file, e.g.:
javaws <myurl>/myapp.jnlp?file=/thefile.txt
and have the servlet do the substitution:
<param name="filename" value="$$file"/>
to generate:
<param name="filename" value="/thefile.txt"/>
If anyone has any experience with doing something like this. I'd love to hear back.

I'm having the same problem. Did you ever find a solution?
Thanks
Wolf

Dynamic mucow parameters

Hi!
Is it possible to achieve a dynamic mucow widget? like having a + sign and adding in extra parameters when using muse?
I've seen others though (which came in mulibs) but there's no tutorial for this. Anyone have an idea how this is achieved?
Thanks!

Hi zazaalaza
Something like this which is found on the default widget library.
http://i.stack.imgur.com/MdfmO.png
Anyone know how this is done with a .mucow file?

Dynamic Environment Parameters

Similar Messages

Maybe you are looking for