Dynamic F4 for Select Options

Hi,
I have two Select-Options for Kunnr and Bukrs.
My requirement is that,
when I select a particualar Kunnr in the Select Option the Corresponding Bukrs must appear in the F4 for the S_BUKRS.
Can someone help please.
Thanks,
Supriya Manik.

You might have to code a search help exit to achieve this purpose.
In the KUNNR search help, have the exit export the selected value to parameter ID KUN.
Then, from the BUKRS search help, read this value and pass it to the KUNNR field in the F4.
You can find more info on search help exits at:
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm
Hope this helps.
Sudha

Similar Messages

Dynamic variant for select option High value

Hi ,
Please help me in creating dynamic variable for a select option date field high value.
II tried the following method:
1. Enter the values in the selection screen
2. Save the variant using the SAVE button
3. In the next screen for the date variable select the 'Selection variable' checkbox (L) and click on the button 'Selection variable' in the toolbar.
4. Now you will see this variable in the next screen with 3 types of buttons. Click on the middle button (i.e. D - Dynamic date calculation).
5. Click on the down arrow button and select the option 'Current Date'.
5. Save the variant.
But it is saving the date value in Field LOW of select option( From value).
I need it in TO field( High value).
Please help.
regards,
Sheeba

Hi Sheeba
we can do it other way .. Select the same steps as you have done but after the assigning the value current date to low ..click on the selection option push button at the application bar and choose the 'less than or equal to' option to your select option value and try the same ....
I guess this would throw you same results as that of the value in the high value button
Cheers,
Jacks.

Dynamic Values for Select Option

Hi,
My requirement is that i have to set
yesterday for the low range of select option
and today for the high range.
I tried the selection variables and found that
only low range can be specified in the
selection variable.
Thanks,
Siva

Hi,
You mean default display variant.
Then try this.
data w_variant TYPE disvariant.
PARAMETERS P_LAYOUT LIKE DISVARIANT-VARIANT.
INITIALIZATION.
*Get Default display variant
PERFORM F100_DISPLAY_DEFAULT_VARIANTS.
FORM f100_display_default_variants.
w_variant-report   = sy-repid.
w_variant-handle   = c_handle.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            i_save        = 'A'
       CHANGING
            cs_variant    = w_variant
       EXCEPTIONS
            wrong_input   = 1
            not_found     = 2
            program_error = 3
            OTHERS        = 4.
IF sy-subrc EQ 0.
    p_layout = w_variant-variant.
ENDIF.
ENDFORM.

Dynamic SQL for selection-option???

Hi,
I am trying to select a table from the parameters (range ) , but every time i run it give me a dump witn error in where ...(itab)
First i declare :
data : cond(72) TYPE C,
         itab LIKE TABLE OF cond .
select-options: p_auart FOR vbak-auart ,
                      p_vkorg FOR vbak-vkorg.
--->
If not p_auart is initial.
    cond = 'auart IN p_auart' .
APPEND cond To itab.
endif.
the i do select:
Select * from vbak where (itab).
---> I give a dum in where clause....
So could you please help me out of this
Thanks

Hi Friend,
Make the following corrections.Your code will work fine.
By the statement- 'itab LIKE TABLE OF cond .' you meant to create a table of the type 'COND' which should be a structure.
So, here lies the problem.In your case COND is a char type variable and you are trying to mimic the table 'itab' from it.
As a rule of thumb,a table should mimic a std., table or a structure.
So remove the following lines:
data : cond(72) TYPE C,
itab LIKE TABLE OF cond .
Include the following lines:
type: begin og itab_record,
        cond(72) TYPE C,
        end of itab_record."Declaration of structure itab_record.
data: itab type standard table of itab_record initial size 0 with header line."Declaration of the table itab which mimics the       structure itab_record.
Modify these two statements,
cond = 'auart IN p_auart' .
APPEND cond To itab.
to
itab_record-cond = 'auart IN p_auart' .
append itab_record.
Other lines are exact,make these changes,execute it and seek my assistance if necessary.
Regards,
Lakshmanan

Can i assign a collective srch help for select option in list display

can i assign a collective srch help for select option in list display

Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva.

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

Input Negative values in selection screen for select-options field

I am not able enter negative values for
SELECT-OPTIONS V_ERFMG FOR MSEG-ERFMG.
It says negative values are not allowed but I need to check for negative values. Kindly provide me solution.

You can't put the negative values here...because the Domain which is attached to MSEG-ERFMG has not the "Sign" checkbox on.
Try with this code:
tables:wbrp.
SELECT-OPTIONS V_ERFMG FOR WBRP-menge.
Regards,
Naimesh Patel

How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating <b>select-option is dialog prog</b> follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request]</b>, use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

How to assign search help using ovs for select options for ALV in web dynpr

how to assign search help using ovs for select options for ALV in web dynpro

Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra

F4 help for select options based on parameter value

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

How to add OBLIGATORY for SELECT-OPTIONS

Hi experts,
I can use OBLIGATORY for PARAMETERS
PARAMETERS :s_WMno TYPE LINK-LGNUM DEFAULT 'SCA' OBLIGATORY.
I want to add OBLIGATORY for SELECT-OPTIONS. How to do this?
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME .
    SELECT-OPTIONS: s_matnr FOR mara-matnr .
SELECTION-SCREEN END OF BLOCK b1.
Many thanks.

Hi,
TABLES spfli.
SELECT-OPTIONS : carrid FOR spfli-carrid OBLIGATORY. " This makes only Low field Obligatory
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'CARRID-HIGH'. " To make High field also obligatory
      screen-required = 1.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Cheerz
Ram

How to do validations for select-options

Hi gurus,
can you suggest me
how to do validations for select-options
Thanks&ragards,
Kals.

HI,
TABLES: BKPF.
TYPES: BEGIN OF TY_BKPF,
       BUKRS TYPE BUKRS,   "COMPANY CODE
       GJAHR TYPE GJAHR,   "FISCAL YEAR
       MONAT TYPE MONAT,   "FISCAL PERIOD
DATA: T_BKPF TYPE TABLE OF TY_BKPF,
      W_BKPF TYPE TY_BKPF.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_CODE   FOR BKPF-BUKRS,
                S_YEAR   FOR BKPF-GJAHR,
                S_PERIOD FOR BKPF-MONAT.
SELECTION-SCREEN: END OF BLOCK B1.
                    AT SELECTION-SCREEN                           *
IF S_CODE IS INITIAL OR S_YEAR IS INITIAL OR S_PERIOD IS INITIAL.
MESSAGE E000(0) WITH 'ENTER VLAUES'.
ENDIF.
SELECT SINGLE * FROM BKPF WHERE BUKRS IN S_CODE.
IF SY-SUBRC <> 0.
MESSAGE E000(0) WITH 'ENTER VALID VALUES'.
ENDIF.
reward if useful
thanks and regards

Standard Match Code for Selection Options with Example

Hi Guys,
             Can anybody tell me Standard Match Code or Search help for Selection Options.
         ex: MBEW-MATNR , MBEW-BWKEY and MBEW-BWTAR. can anybody tell how to keep Search Help or Match Code for the Above Fields in ECC 6.0 with Example
          Very Urgent.
Thanks,
Gopi.

Well Gopi.. as per your requirement no need to use collective search help.
I guess you have three fields in selection-screen,out 3 fields you have two fields contains search help.
Create your user defined search help BWTAR ..
Check the below links for creation search help :
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee2b446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Hope you got it.
Thanks
Seshu

How to use offset for select-option parameter ?

Hi experts
could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
following is my code
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
here "prctr" length is 10.
i'm using two tables 1. vbsegd-bupla
                                2. vbsegs-prctr
here prctr+6(4) = bupla.
"Bupla" length is 4
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                             WHERE belnr = it_vbkpf-belnr
                                                               AND gjahr = it_vbkpf-gjahr
                                                               AND bukrs = it_vbkpf-bukrs
                                                               AND bupla IN s_prctr.
the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
                                                            WHERE belnr = it_vbkpf-belnr
                                                              AND gjahr = it_vbkpf-gjahr
                                                              AND bukrs = it_vbkpf-bukrs
                                                              AND prctr IN s_prctr.
this is working as prctr and s_prctr lengths are equal.
could anybody please help me out in this.
Thanks in advance.
regards
satish

Below code will work for you.
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
RANGES: s_bupla FOR vbsegd-bupla.
s_bupla[] = s_prctr[].
DELETE ADJACENT DUPLICATES FROM s_bupla.
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                              WHERE belnr = it_vbkpf-belnr
                                                                AND gjahr = it_vbkpf-gjahr
                                                                AND bukrs = it_vbkpf-bukrs
                                                                AND bupla IN s_bupla.

Value help for select-option not filling selection field

I'm having some problems with a value help on a select-option. I've managed to get the value help displaying the correct values but for some reason can't get it to populate the selection field after I've selected a record.
I have the following call:
wd_this->m_handler->add_selection_field(
                      i_id = 'SHORT_D'
                      i_description = 'Program'
                      it_result = lt_range_table
                      i_read_only = read_only
                      i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_SEARCHHELP
                      i_value_help_id = 'ZPROGSTUDY' ).
where ZPROGSTUDY is a new search help I've set up with an exit to retrieve the values.
Any ideas ? Thanks.

Hi Malcolm,
The code you have is OK. I copied your code into a test program and it worked as expected.
I used a search help where the possible values are populated in the search help exit, exactly as in your case. The only time it did not work was when read_only = X, but that is obvious also from a visual point of view since the input field is greyed out in that case. The popup also tells you is in RO mode...
Does your SHLP work when you test it from SE11? Returns values?
SAP provides a lot of WD4A sample code, see for example component WDR_TEST_SELECT_OPTIONS look for
select-option fields > special cases > input helps > Non field-specific input help using search help
Regards,
George

Dynamic F4 for Select Options

Similar Messages

Maybe you are looking for