Dynamic field naming

Post Author: Cafewai
CA Forum: Formula
Iam trying to understand if there is a way to build a formula that allows me to reference a data field based on the content of another data field.
Because there are many values to the source field, it should be formula based as opposed to explicit references.
I can define a stringvar that constructs the name of the field I'd like to display from another field.
eg stringvar stock_at_location:="{tablename2."{tablename1.Location}"}"
but I don't know how I can go from a string (that contains the filed name) to the content of the field.
(Yes, I am a beginner!)

Post Author: Cafewai
CA Forum: Formula
{Table1.Location} has numerous values [North, South, East, West...etc]
I want to know the content of a corresponding field from Table2 which is suitably named eg {Table2.North} ..... {Table2.West}
As there are many locations, I want to formulate the display/print the field's content.
So if {Table1.Location} were East then I want to fetch and display the value in {Table2.East}.
Thanks and regards

Similar Messages

Sum for Dynamic Fields in a Dynamic Table with Field Symbol

Hi All,
I currently have an report which I am looking to update with some totals. The information is currently output in an ALV which is fed data from a dynamic table defined with a field symbol. The modification that needs to be applied is a summation per currency code where each of the fields to be summed is a dynamically named field at runtime. I am now just looking to see if anyone has any recommendations on how to obtain these totals it would be appreciated. I have no problem doing the leg work in piecing the solution together but am just stuck on which approach I should be investigating here. I have looked into several options but do to the fact that the totals are for dynamic fields in a dynamic table and it is a field symbol I am having some difficulties thinking of the easiest approach to obtain these totals.
Below is a simple sample of what the report currently looks like and what we are looking to add.
====================================================================================
As-Is Report:
DETAILED DATA ALV
Company Code | Plant | 2006 Total | 2007 Total | 2008 Total | CURRENCY
0001          |   ABCD |    1,500     |    1,200     |    1,700    |    USD
0001          |   BCDE   |    2,300     |    4,100     |    3,600    |    GBP
0003          |   DBCA |    3,200     |    1,600     |    6,200    |    USD
Addition 1:
TOTALS PER CURRENCY
Currency                | 2006 Total | 2007 Total | 2008 Total |
USD              |    4,700     |    2,800     |    7,900    |
GBP                       |    2,300     |    4,100     |    3,600    |
Addition 2:
CONVERSIONS TO USD
                                      | 2006 Curr   | 2006 USD    | 2008 Curr   | 2006 USD   |
USD                       | 4,700 USD   | 4,700 USD   | 7,900 USD | 7,900 USD |
GBP   (1.5GBP/1 USD)    | 2,300 GBP   | 1,150 USD   | 2,300 GBP | 1,800 USD |
====================================================================================
Any recommendations will be appreciated.

Hi,
We cannot use the key word SUM in the loop at assigning statement.
The way i see is
When you are creating the first dynamic internal table , create one more with the structure below:
Currency | 2006 Total | 2007 Total | 2008 Total |
Then while populating the data into first itab,also move the contents to the second itab using collect statement.

Comparing dynamic fields of objects using equals and hashCode methods

To compare the different objects of the same class with their contents like jobTitleId, classificationId, deptId & classificationId was to be done and do some manipulations later using Set and Map. I was able to do that by simply overriding the equals and hashCode methods of Object class and was able to fetch the information (like in the following Map).
    Map<LocationData, List<LocationData>>
The following is the class I used (its been shown to you so that it can be referred for my problem statement):
LocationData class
    package com.astreait.bulkloader;
    public class LocationData {
        String locId, deptId, jobTitleId, classificationId;
        @Override
        public boolean equals(Object obj) {
            LocationData ld = (LocationData)obj;
            return this.deptId.equals(ld.deptId) && this.jobTitleId.equals(ld.jobTitleId) && this.classificationId.equals(ld.classificationId) &&
    this.locId.equals(ld.locId);
        @Override
        public int hashCode() {
            return deptId.hashCode() + jobTitleId.hashCode() + classificationId.hashCode() +locId.hashCode();
Problem:
I'm already known to which all fields of this object I need to make the comparison.
i.e I'm bound to use the variables named classificationId, deptId, jobTitleId & locId etc.
Need:
I need to customize this logic such that the fields Names (classificationId, deptId, jobTitleId & locId etc) can be pulled dynamically along with their values. So, as far as my understanding I made use of 2 classes (TableClass and ColWithData) such that the List of ColWithData is there in TableClass object.
I'm thinking what if I override the same two methods `equals() & hashCode();`
such that the same can be achieved.
    TableClass class #1
    class TableClass{
        List<ColWithData> cwdList;
        @Override
        public boolean equals(Object obj) {
            boolean returnVal = false;
                    // I need to have the logic to be defined such that
                    // all of the dynamic fields can be compared
            return returnVal;
        @Override
        public int hashCode() {
            int returnVal = 0;
                    // I need to have the logic to be defined such that
                    // all of the dynamic fields can be found for their individual hashCodes
            return returnVal;
ColWithData class #2
    class ColWithData{
        String col; // here the jobTitleId, classificationId, deptId, locId or any other more fields info can come.
        String data; // The corresponding data or value for each jobTitleId, classificationId, deptId, locId or any other more fields.
Please let me know if I'm proceeding in the right direction or I should make some any other approach. If it is ok to use the current approach then what should be performed in the equals and hashCode methods?
Finally I need to make the map as: (Its not the concern how I will make, but can be considered as my desired result from this logic)
    Map<TableClass, List<TableClass>> finalMap;

Hello,
What is the relation with the Oracle Forms tool ?
Francois

Get input for 100 dynamic fields in a single screen

Hi all
I got one requirement wherein i need to accept input for around 100 dynamic fields in a single screen. screen can scroll down if possible.
Can anyone tell me whether it is possible. if yes please let me have the sample code.
Thanks
Ravindra Suvarna

Ravi,
Probably a TAB STRIP might help you.
Seggregate your 100 fields logically, say 5 groups.
Have a TAB STRIP CONTROL, with 5 tab strips and place 20 fields in each of the tabs. Each tab strip will have a sub screen.
Regards,
Ravi
Note : Please mark the helpful answers.

How to create a dynamic fields in the Adobe Interactive form ?....urgent...

Hi Experts,
I'm working on Adobe Interactive form developed in WDP ABAP.( I have successfully config the ADS in my server.)
Action:
1. Create two view -
first_view and second_view in the WDP ABAP..
2. In the first_view, there are a input field( named "elements_number") and a button(named "create_button") .
3. In the second_view, there is Adobe Interactive form ( named "adobe_form" ).
4. Run the WDP ABAP: first_view is opened. Type a number ex."3" in the "elements_number", click the "create_button".
5. The second_view is opened.
6. The "adobe_form" is occured.
7. There are 3 text_fields in the "adobe_form".
Steps (1) ~ (6), I have completed, but I don't know how to implement the step (7).
Please give me some hint on this. I try to use the CL_WD_ADOBE_SERVICE, but I didn't found any examples. Do you give me some ways to implement the function? Thanks a lot.
Thank you very much.
Thanks,
Tao

Hi Philippe,
Thank you very much in advance.
Do you tell me how to hide elements in the "adobe_form" in the WDP ABAP? How can I get the elements attributes in the "adobe_form" from the method WDDOMODIFY of the second_view in the WDP ABAP.
Please give me some hints on this. Do you give me some ways to implement functions( hide elements and get elements's attributes)? Thanks a lot.
Thank you very much.
Thanks,
Tao

Dynamic field value in Sales order item table control

Hi
I need to find the VBAP-VKAUS (Usage indicator) field value in run time of the creation of sale order ...these values stored in the table TVLV.
when i debug the program SAPMV45A in the screen 4900 this VBAP-VKAUS value gets empty in structure VBAP even though i can see other values like MATNR etc...
this field is configurable (dynamic) field and not appear for all the ordertypes.
i need to pass this VBAP-VKAUS value to KOMPD-VKAUS
Thru user-exit..so please let me know if somebody knows how to find this VBAP-VKAUS value.
Thanks in advance
Madi

hi,
Plz Check the struc KOMP/KOMK. Let me know, if this helped.
Rgds,
Raghu.

How to convert internal table with dynamic fields to XML

Dear all,
I met a problem like the following:
The aim is to transform the following parameter to XML
IT_FIELD stores the dynamic filed name of the internal table,with these fields, the dynamic internal can be created by cl_abap_tabledescr=>create(it_field)
IT_VALUE stores the value of the internal table dynamically created with dynamic fields.
For example
IT_FIELD =>
line1: FIELD1
line2: FIELD2
line3: FIELD3,
three lines in this internal table.
dynamically created internal table structure FIELD1 FIELD2 FIELD3
And IT_VALUE=>
1 2 3 (First line)
11 22 33
two lines of data.
Do you have any idea about how to transform the IT_VALUE to XML here? And also the transformed XML to the IT_VALUE.( we may need remember IT_FIELD here for later XML to IT_VALUE.)
Hope I describe the problem clearly.
Any inputs will be appreciated.
Edited by: Max Tang on Jan 12, 2009 3:46 PM
Edited by: Max Tang on Jan 12, 2009 4:14 PM

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

How can we display dynamic fields from a XML CLOB?

Jdeveloper Version : 11.1.1.4.0 (11g)
We are calling a database package.procedure from a page VO and it returns a result set. The result set is mainly a XML CLOB. Within XML CLOB, we have various sections which we need to parse and display those on JSF page. Couple of sections within XML are having dynamic fields which means the number of fields returned under that section may change depending upon data conditions. We need to find technical way of displaying those dynamic fields (field name and its data – both are part of XML).
Please suggest how can this be achieved.
Thanks

<?xml version="1.0" encoding="UTF-8" ?>
<nodes>
<node>
<category_id>3</category_id>
<parent_id>2</parent_id>
<name>Mobile</name>
<is_active>1</is_active>
<position>1</position>
<level>2</level>
<children>
<node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
<node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
</node>
<node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
</node>
</children>
</node>
<node>
<category_id>4</category_id>
<parent_id>2</parent_id>
<name>Laptop</name>
<is_active>1</is_active>
<position>2</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>5</category_id>
<parent_id>2</parent_id>
<name>Monitor</name>
<is_active>1</is_active>
<position>3</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>8</category_id>
<parent_id>2</parent_id>
<name>Camera</name>
<is_active>1</is_active>
<position>4</position>
<level>2</level>
<children></children>
</node>
</nodes>
Is this correct format to create dynamic menu?

How to capture the dynamic fields in the form...urgent...Please help me

Hi Gurus,
I'm working on Adobe Interactive form developed in WDP ABAP. I have a dynamic field called Roles. User can give n number of roles as Input. How can I capture them in my WDP. I know how to capture if there is a fixed field like name, age, email id etc.. Please give me the detail explaination on this.

hi,
when you create a form, the UI elements are created by either directlly dragging and dropping the context elements or map form elements with context elements.
when pdf is online its contents are reflected in the Context Attributes.
so if you change/modify the Context Attributes, the change is reflected in the corresponding form fields.
regards,
-amol gupta

Dynamic field in select query

Hi Team,
I have to select dynamic fields from database table GLT0.
This depends on period value given on screen.
If period is 01 then fields will be hsl01.
If period is 02 then fields will be hsl01 and hsl02.
If period is 03 then fields will be hsl01,hsl02 and hsl03 .
so on...till 12..
My code is throwing exception at select query.
"Error in module RSQL of the database interface."
My code :
*"      Type declaration to store field name as per given period
TYPES : BEGIN OF y_fieldname        ,
           fieldname(10) TYPE c    ,
         END OF y_fieldname         .
data t_fieldname TYPE STANDARD TABLE OF y_fieldname   .
DO p_monat TIMES.
     clear w_count .
      MOVE sy-index TO w_count
      IF sy-index LE c_9.
        CONCATENATE c_hsl
                    c_0
                    w_count
        INTO      e_fieldname-fieldname.
        APPEND e_fieldname TO t_fieldname.
      ELSE.
        CONCATENATE c_hsl
                    w_count
        INTO     e_fieldname-fieldname.
        APPEND e_fieldname TO t_fieldname.
      ENDIF.
    ENDDO.
Get Local Currency Amounts
from table glt0 depending on period
    SELECT (t_fieldname)
      FROM glt0
      INTO TABLE t_glto_with_saknr
      FOR ALL ENTRIES IN t_bukrs
     WHERE rldnr EQ c_00
       AND rrcty EQ c_0
       AND rvers EQ c_001
       AND bukrs EQ t_bukrs-bukrs
       AND ryear EQ p_gjahr
       AND racct IN r_saknr.
Please guide me.
Thanking u in advance.
Sangeeta Verma

Hi Asik,
I m selecting all fields now as suggestd by u so in one record i have hsl01 to hsl12.
I have to calculate balance into e_glt0_bal-bal .This balance is summation of e_glt0_bal-hsl01 till e_glt0_bal-hsl12 (depending on monat).
I m using logic in process then
my code now :
data:    w_monat_bal type string .
          DO p_monat TIMES.
            MOVE c_01 TO w_count .
            CONCATENATE 'e_glt0_bal-hsl'
                         w_count
                   INTO w_monat_bal.
            ASSIGN w_monat_bal TO <fs_monat_bal>.
            e_glt0_bal-bal = e_glt0_bal-bal + <fs_monat_bal>.
            w_count = w_count + c_01.
          ENDDO.
But <fs_monat_bal> can not be added.
Giving exception :
Unable to interpret "e_glt0_bal-hsl01" as a number.
If I do <fs_monat_bal> type GLT0-hslvt instead to type any
Then assigning from w_monat_bal is not possible.

Reg: Dynamic Field catalog in ALV

Hi ,
Can any one guide me to build a dynamic field catalog in ALV report?
Below is the format which i expect..........
Material    |     Plant1    |    Plant2    |    Plant3    | ....................|    Plant 20      |
Qty
Val
Qty
Val
Qty
Val
Qty
Val
The plant 1 to 20 has to be brought dynamically as headings from T001W table. (Horizontally populate)
Below each plant i need sub-headings "QTY" and "VAL".                                  (Horizontally populate)
List of Materials should be brought vertically from MARA table.                          (Vertically populate)
Can anyone suggest how to bring out this format for populating data accordingly into the o/p format?
Ur help will be appreciated.
Thanks,
K.S.Kannan

your part of the code is present in routine
perform dynamic_table.
*& Report ZCS_NAC_MAT_CHARACTERISTICS
2/ Description ...: Business requirement is to get all materials
without any characteristic values maintained in SAP
which are given in the selection screen.
REPORT znac_material_char.
TYPE-POOLS : abap,
slis.
TABLES : kssk,
klah,
mara,
makt,
cabn,
t134,
t023.
DATA : i_fieldcat TYPE slis_t_fieldcat_alv ,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA : w_layout TYPE slis_layout_alv.
DATA : st_layout TYPE slis_layout_alv.
DATA : t_header TYPE slis_t_listheader,
w_header TYPE slis_listheader.
TYPES : BEGIN OF ty_cabn,
atinn TYPE cabn-atinn,
atnam TYPE cabn-atnam,
END OF ty_cabn.
DATA : i_cabn TYPE STANDARD TABLE OF ty_cabn WITH HEADER LINE.
DATA : w_cabn LIKE i_cabn.
TYPES : BEGIN OF ty_ausp,
objek TYPE ausp-objek,
atinn TYPE ausp-atinn,
klart TYPE ausp-klart,
END OF ty_ausp.
DATA : i_ausp TYPE STANDARD TABLE OF ty_ausp WITH HEADER LINE.
DATA : w_ausp LIKE i_ausp.
TYPES : BEGIN OF ty_mara,
matnr TYPE mara-matnr,
mtart TYPE mara-mtart,
matkl TYPE mara-matkl,
prdha TYPE mara-prdha,
mstae TYPE mara-mstae,
mstde TYPE mara-mstde,
END OF ty_mara.
DATA : i_mara TYPE STANDARD TABLE OF ty_mara WITH HEADER LINE.
DATA : w_mara LIKE i_mara.
DATA : i_mara_temp TYPE STANDARD TABLE OF ty_mara WITH HEADER LINE.
DATA : w_mara_temp LIKE i_mara_temp.
TYPES :BEGIN OF ty_data,
atnam TYPE cabn-atnam,
atinn TYPE cabn-atinn,
objek TYPE ausp-objek,
klart TYPE ausp-klart,
matnr TYPE mara-matnr,
maktx TYPE makt-maktx,
mtart TYPE mara-mtart,
matkl TYPE mara-matkl,
prdha TYPE mara-prdha,
mstae TYPE mara-mstae,
mstde TYPE mara-mstde,
END OF ty_data.
DATA : i_data TYPE STANDARD TABLE OF ty_data WITH HEADER LINE.
DATA : w_data LIKE i_data.
DATA : i_class TYPE STANDARD TABLE OF sclass WITH HEADER LINE.
DATA : w_class LIKE i_class.
DATA : i_class_temp TYPE STANDARD TABLE OF sclass WITH HEADER LINE.
DATA : w_class_temp LIKE i_class_temp.
DATA : i_objdata TYPE STANDARD TABLE OF clobjdat WITH HEADER LINE.
DATA : w_objdata LIKE i_objdata.
TYPES : BEGIN OF ty_objdata_temp.
TYPES: matnr TYPE mara-matnr.
TYPES: maktx TYPE makt-maktx.
INCLUDE STRUCTURE clobjdat.
TYPES : prdha TYPE mara-prdha.
TYPES : mstde TYPE mara-mstde.
TYPES : END OF ty_objdata_temp.
DATA : i_objdata_temp TYPE STANDARD TABLE OF ty_objdata_temp WITH HEADER LINE.
DATA : w_objdata_temp LIKE i_objdata_temp.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> TYPE ANY.
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
fs_fldcat TYPE slis_t_fieldcat_alv,
t_fldcat1 TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(30) TYPE c.
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(40) TYPE c.
DATA: index(3) TYPE c,
v_time(60) TYPE c.
DATA: wa_cat LIKE LINE OF fs_fldcat.
CONSTANTS : c_nac TYPE klah-class VALUE 'NAC',
c_klart TYPE ausp-klart VALUE '001',
c_check TYPE c VALUE 'X' .
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (28) text-001 .
SELECT-OPTIONS: s_atnam FOR cabn-atnam NO INTERVALS OBLIGATORY. " Characteristic name
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_matnr FOR mara-matnr. " material Number
SELECT-OPTIONS: s_mtart FOR mara-mtart. " material type
SELECT-OPTIONS: s_matkl FOR mara-matkl. " material type
SELECT-OPTIONS: s_mstae FOR mara-mstae. " X-Plant material status
PARAMETERS : s_date LIKE sy-datum OBLIGATORY DEFAULT sy-datum . " date
SELECTION-SCREEN END OF BLOCK b2 .
AT SELECTION-SCREEN ON s_atnam.
SELECT SINGLE * FROM cabn WHERE atnam IN s_atnam.
IF sy-subrc 0.
MESSAGE text-003 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON s_matnr.
SELECT SINGLE * FROM mara WHERE matnr IN s_matnr.
IF sy-subrc 0.
MESSAGE text-004 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON s_mtart.
SELECT SINGLE * FROM t134 WHERE mtart IN s_mtart.
IF sy-subrc 0.
MESSAGE text-005 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON s_matkl.
SELECT SINGLE * FROM t023 WHERE matkl IN s_matkl.
IF sy-subrc 0.
MESSAGE text-006 TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_data_keydate.
PERFORM material_all_charname.
PERFORM get_classification.
PERFORM dynamic_table.
*& Form dynamic_table
text
--> p1 text
<-- p2 text
FORM dynamic_table.
PERFORM fieldcatalog.
PERFORM dynamic_table_create.
PERFORM final_data.
PERFORM final_fieldcatalog.
PERFORM layout_build.
PERFORM grid_display.
ENDFORM. " fieldcat
*& Form layout_build
text
FORM layout_build .
st_layout-zebra = c_check.
st_layout-no_vline = ''.
st_layout-colwidth_optimize = c_check.
st_layout-detail_popup = c_check.
st_layout-detail_initial_lines = c_check.
st_layout-detail_titlebar = text-021.
ENDFORM. " layout_build
*& Form alv_top_of_page
text
FORM alv_top_of_page.
REFRESH t_header.
CLEAR t_header.
w_header-typ = 'H'. "H=Header, S=Selection, A=Action
w_header-key = ' '.
w_header-info = text-019.
APPEND w_header TO t_header.
CONCATENATE sy-datum4(2) '-' sy-datum6(2) '-' sy-datum0(4) ' / ' sy-uzeit0(2) ':' sy-uzeit2(2) ':' sy-uzeit4(2) INTO v_time.
w_header-typ = 'S'. "H=Header, S=Selection, A=Action
w_header-key = text-020.
w_header-info = v_time.
APPEND w_header TO t_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
ENDFORM. "alv_top_of_page
*& Form grid_display
text
--> p1 text
<-- p2 text
FORM grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'ALV_TOP_OF_PAGE'
it_fieldcat = fs_fldcat
is_layout = st_layout
i_default = c_check
i_save = 'A'
it_events = v_events[]
TABLES
t_outtab = <t_dyntable>.
ENDFORM. " grid_display
*& Form FINAL_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM final_fieldcatalog .
wa_cat-fieldname = text-009.
wa_cat-seltext_m = text-015.
wa_cat-outputlen = 18.
APPEND wa_cat TO fs_fldcat.
wa_cat-fieldname = text-011.
wa_cat-seltext_m = text-016.
wa_cat-outputlen = 40.
APPEND wa_cat TO fs_fldcat.
LOOP AT s_atnam.
CLEAR wa_cat.
wa_cat-fieldname = s_atnam-low.
wa_cat-seltext_m = s_atnam-low.
wa_cat-outputlen = '15'.
APPEND wa_cat TO fs_fldcat.
ENDLOOP.
wa_cat-fieldname = text-012.
wa_cat-seltext_m = text-017.
wa_cat-outputlen = 18.
APPEND wa_cat TO fs_fldcat.
wa_cat-fieldname = text-013.
wa_cat-seltext_m = text-018.
wa_cat-outputlen = 8.
APPEND wa_cat TO fs_fldcat.
ENDFORM. " FINAL_FIELDCATALOG
*& Form FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM fieldcatalog .
wa_it_fldcat-fieldname = text-009.
wa_it_fldcat-datatype = text-010.
wa_it_fldcat-intlen = 18.
APPEND wa_it_fldcat TO t_fldcat1.
wa_it_fldcat-fieldname = text-011.
wa_it_fldcat-datatype = text-010.
wa_it_fldcat-intlen = 40.
APPEND wa_it_fldcat TO t_fldcat1.
LOOP AT s_atnam.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = s_atnam-low.
wa_it_fldcat-datatype = text-010.
wa_it_fldcat-intlen = 30.
APPEND wa_it_fldcat TO t_fldcat1.
ENDLOOP.
wa_it_fldcat-fieldname = text-012.
wa_it_fldcat-datatype = text-010.
wa_it_fldcat-intlen = 18.
APPEND wa_it_fldcat TO t_fldcat1.
wa_it_fldcat-fieldname = text-013.
wa_it_fldcat-datatype = text-014.
wa_it_fldcat-intlen = 8.
APPEND wa_it_fldcat TO t_fldcat1.
ENDFORM. " FIELDCATALOG
*& Form DYNAMIC_TABLE_CREATE
text
--> p1 text
<-- p2 text
FORM dynamic_table_create .
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat1
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
ENDFORM. " DYNAMIC_TABLE_CREATE
*& Form FINAL_DATA
text
--> p1 text
<-- p2 text
FORM final_data .
LOOP AT i_objdata_temp INTO w_objdata_temp.
*assign w_objdata_temp-matnr to <fs_dyntable>.
AT NEW matnr.
wa_flname = text-009.
fieldvalue = w_objdata_temp-matnr.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDAT.
wa_flname = text-011.
fieldvalue = w_objdata_temp-maktx.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
wa_flname = w_objdata_temp-atnam.
fieldvalue = w_objdata_temp-ausp1.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
wa_flname = text-012.
fieldvalue = w_objdata_temp-prdha.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
wa_flname = text-013.
fieldvalue = w_objdata_temp-mstde.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
AT END OF matnr.
APPEND <fs_dyntable> TO <t_dyntable>.
ENDAT.
ENDLOOP.
ENDFORM. " FINAL_DATA
*& Form GET_CLASSIFICATION
text
--> p1 text
<-- p2 text
FORM get_classification .
LOOP AT i_data INTO w_data.
SELECT SINGLE * FROM klah WHERE class = c_nac.
IF sy-subrc = 0.
IF w_data-mstde >= klah-vondt.
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
class = c_nac
classtext = c_check
classtype = c_klart
clint = 0
features = c_check
language = sy-langu
object = w_data-objek
TABLES
t_class = i_class
t_objectdata = i_objdata
EXCEPTIONS
no_classification = 1
no_classtypes = 2
invalid_class_type = 3
OTHERS = 4.
LOOP AT i_class INTO w_class.
MOVE w_class TO w_class_temp.
APPEND w_class_temp TO i_class_temp.
ENDLOOP .
LOOP AT s_atnam.
READ TABLE i_objdata INTO w_objdata WITH KEY atnam = s_atnam-low.
IF sy-subrc = 0.
MOVE w_data-matnr TO w_objdata_temp-matnr.
MOVE w_data-maktx TO w_objdata_temp-maktx.
MOVE-CORRESPONDING w_objdata TO w_objdata_temp.
MOVE w_data-prdha TO w_objdata_temp-prdha.
MOVE w_data-mstde TO w_objdata_temp-mstde.
APPEND w_objdata_temp TO i_objdata_temp.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " GET_CLASSIFICATION

How do I create continuous dynamic fields in Acrobat Pro?

Hello everyone,
I've created a legal PDF file and I need to add some dynamic fields inside.
I know how to make the fields but I would like to make it so that if there are more than one on the same line, that they will affect each other's length in case the user inputs long / short data.
For example:
If I have 2 fields:
NAME SURNAME
How do I make it that after the user inputs their NAME the SURNAME field will start a bit after the NAME field and there will be no big gap between them.
Looking forward to hear some solutions
Thanks.

[discussion moved to Creating, Editing & Exporting PDFs forum]

Dynamic file naming with File/FTP adapter

Hi all,
I have a requirement for writing files with names of the files based on a customer ID.... a dynamic name based on a value retrieved from the customer DB.
I have already tried using the dynamic file naming suggestion in the bpel dev guide, it does not work. I followed the instructions, the process fails to compile and throws "part" and "undefined variables" errors etc.
Has anyone succesfully used file/ftp adapter to write files with dynamic file names (using a varibale), not %SEQ% or %datetime% formats?
Thanks,
Hasan

You can create a header variable that will allow you to set the outbound file name inside the process. This variable is a message type. From the type chooser select:
Message Types
Partner Links
Outbound Partner Link
Outbound wsdl
Message Types
Imported WSDL
fileAdapterOutboundHeader.wsdl
OutboundHeader_msg
This variable will have a part filename.
Set this part to whatever you wish your file to be named.
Select the invoke to your outbound file/ftp partnerlink. Move to the adapters tab and select the header variable you created as the Input Header Variable.

Dynamic fields in PDF form

Hello Experts,
I have a requirement to design all fields in a form dynamically..!
It means if the user selects speific fields in a custom config, the form should be genarated with only those fields.
I know it can be done placing fields at design time and then hiding it later.. but I am looking for dynamic fields creation and position and setting its properties dynamically.
Thanx for Ur time.. !

hi,
Did you try creating a composite form ?? The sap.help link to creating Dynamic forms is give below
[link|http://help.sap.com/saphelp_nwce10/helpdata/en/44/bca11fc60b7006e10000000a155369/content.htm]
Hope this helps
Regards
Manthan.

Generate Dynamic fields in an Interactive Form

Hello,
I would like to know if it is possible to generate dynamic fields in an Interactive Forms ?
Best regards,
A.Henry

Hi,
Yes it can be implemented by using scripts.
Here you can do the hide and visible things and once the field is binded in the interactive form that do not change.
We can utilize the context node elements only once we can put into interactiveform only . we can not use as dynamically as Context attributes.
What you are exactly looking for?
Thanks,
Lohi.
Message was edited by:
Lohitha M

Dynamic field naming

Similar Messages

Maybe you are looking for