Dynamic field Select from table

Hi,
I have to select certain field from table. The field which I have to select I do not know.
It will come dynamically from program.
Plz help me what is correct statement to execute.
Thanks.
S Sahoo

Hi Sahoo,
Pllease follow below steps.
1, Create internal table with field Fieldname TYPE FIELDNAME (Say ITAB)
2. Append Fields (thats you want to select) to internal table [at run time]
3. Use
SELECT (ITAB)
              into table <table>
              from <DB>
              where <cond>
Hope this helps,
Nag

Similar Messages

  • Dynamic data select from table is giving dump

    Hello Experts,
       Below statement is giving Dump after it move all the data in my dynamic table.
    When i see in debug. All my recored are avilable in <T_TAB> Table.
    SELECT * FROM (pa_tab) INTO CORRESPONDING FIELDS OF TABLE <T_TAB>.
    > IF SY-SUBRC = 0.
    Information on where terminated
    The termination occurred in the ABAP program "ZFIR_ZTABLE_UPLOAD" in
    "F_DOWNLOAD".
    The main program was "ZFIR_ZTABLE_UPLOAD ".
    The termination occurred in line 403 of the source code of the (Include)
    program "ZFIR_ZTABLE_UPLOAD"
    of the source code of program "ZFIR_ZTABLE_UPLOAD" (when calling the editor
    4030).
    Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
    the
    procedure "F_DOWNLOAD" "(FORM)" but was not handled locally, not declared in
    the
    RAISING clause of the procedure.
    The procedure is in the program "ZFIR_ZTABLE_UPLOAD ". Its source code starts
    in line 399
    of the (Include) program "ZFIR_ZTABLE_UPLOAD ".
    please help me.
    Regards,
    Amit
    Message was edited by:
            Amit Gupta

    Hi Amit,
    Check if you are doing the following in your program
    FIELD-SYMBOLS <T_TAB> TYPE STANDARD TABLE.
    DATA: g_tabref type ref to data.   "Reference to your table structure
    CREATE DATA g_tabref type standard table of (pa_tab).
    ASSIGN g_tabref->* to <T_TAB>.
    SELECT * FROM (PA_TAB) INTO TABLE <T_TAB>.
    Hope this solves your problem.
    Let me know if you require any further info.
    Enjoy SAP. Reward points of useful
    Rajasekhar

  • Dynamic field labels in table control

    Hi experts,
        My requirement is to display dynamic field labels in table control can we do this. I am much aware
    that we can do it in alv_grid. Please let me know.
    Thanks in advance.
    Sri

    Hi Anubhab,
         Thanks. With your help i could able to solve the problem. Let me put this in some
    more detail.
    When we are pulling the field from a table to table control we need to make sure the fields should have a data elements. After pulling all the fields to a table control ,we need to drag out  and delete the current table control column headings and then drop in the (new) I/O fields into their place.  I then set the text on these new fields within the PBO.  If we try to drop the (new) I/O fields on top of the existing ones with out deleting it won't work.
    Thanks & Regards.
    Srikanth

  • Can I simulate SELECT * FROM TABLE WHERE ROW IN (1111,2222) using SQLJ

    I have a fct like
    public void fct(String inStr) {
    String str = "SELECT * FROM TABLE WHERE ROW IN" + inStr;
    // then I xecute the query using JDBC connection
    But I want to do the same thisn using SQLJ like:
    public void fct(String inStr) {
    #sql [nctx] iter = { SELECT * FROM TABLE WHERE ROW IN :inStr}
    When I run the second version and give a parameter like "(1111,2222)" it gives
    ORA-01722: invalid number error.
    Is there a way to give parameters to in clauses of SQLJ statements.
    Thanks in regard.

    This is a SQLJ FAQ. You can find the FAQ at:
    http://technet.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html
    Your question is addressed in the following section:
    http://technet.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#variablesizevaluelist
    Note that that section has a typo. The lines:
    ? // populate mynumbers
    #sql { SELECT * FROM tab WHERE col in (:(a[0]),:(a[1]),?};
    should read:
    ... // populate mynumbers
    #sql { SELECT * FROM tab WHERE col in (:(a[0]),:(a[1]),...};
    By the way, with the next release SQLJ will support pasting in of dynamic SQL fragments. Then you'll be able to do pretty much what you are trying to accomplish here (albeit with slightly different syntax). Until then you'd have to use the workarounds from the FAQ.

  • Html form for select * from table a

    Hi all,
    I m looking for report on header/footer part from one apex pages
    which will display context from table a, like sql statement
    select * from table a, written in html.
    Is any examples in java script/html select from tables
    (and same insert into table A (...) select * from table b)
    thanks,
    Gordan

    Hello Gordan,
    Do you want to show the whole report or just some data of it?
    If it's for ex just the name and address you could create two items and have a process or computation to fill it with your select statement.
    If it's the whole report, just create the report and put it in for ex. Region 1. In your page template you can specify that Region 1 needs to come into the footer.
    Regards,
    Dimitri
    -- http://dgielis.blogspot.com/
    -- http://apex-evangelists.com/
    -- http://apexblogs.info/

  • Xmlgen.getxml("select * from table") returns null pointer exception

    I am running oracle 8i on solaris server and clinet on windows
    NT and i am this select statement
    select xmlgen.getxml("select * from table") from dual ,its
    returning null pointer exception,i have tried it through
    jdbc,even then its returning xml as
    <?xml version = '1.0'?>
    <ERROR>java.lang.NullPointerException</ERROR>
    can any body tell me the error.Help will be really appreciated.I
    need an urgent response,if some one can guide me please.
    My email is [email protected],if you can give me a quick
    response on this email,your effot will be appreciated.
    thanks
    Masood

    What is actually throwing the NullPointerException? rs.getMetaData() or table.setModel()?

  • How do I do SELECT * FROM TABLE WHERE KEY IN ({list})?

    The title says it all really.
    Is there a reasonable performant way to perform the query
    SELECT * FROM TABLE WHERE KEY IN ({list})where {list} is String []?
    I am currently creating a PreparedStatement with a for loop like this   StringBuffer sb = new StringBuffer ("SELECT * FROM TABLE WHERE ID IN (");
      for (int ii=0;ii<keys.length;ii++) {
        sb.append (keys [ii]);
        if (ii != keys.length-1) sb.append (",");
      sb.append (")");but this means that the prepared statement is created each time I call my method and so I'm not sure that the optimizer will find it easy to cope with. Is there a construction that I'm missing along the lines of SELECT * FROM TABLE WHERE KEY = ? where I can create the PreparedStatement once and just call setObject or something on it when the values in {list} change?

    but this means that the prepared statement is created
    each time I call my method and so I'm not sure that
    the optimizer will find it easy to cope with.You are right, the optimizer won't find that easy to deal with (presuming that is even relevant for your driver/database.) But most optimizers won't do anything with statements that change and that is what you are doing.
    You could create several prepared statements which have a common number of bind variables. For example 10 statements with from 1 to 10 bind values. This will work if most of the queries use those.

  • Select from table containing clob

    If i try to select from table containing clob column in SQL PLus it gives error.
    Tab1 contains 3 clob columns and 1 blob column
    select * from tab 1;
    SP2-0678: Column or attribute type can not be displayed by SQL*Plus
    The same statement works in SQL Developer and I am able to see the result.
    Actually i am writing the queries and they will be used by Java developers in their JSP page.
    So what happens here? Can Java use these select statements or will it throw error like SQL Plus?

    BLOB column content can't be displayed in SQL*Plus:
    SQL> create table t_blob (b blob);
    Table created.
    SQL> edit
    Wrote file afiedt.buf
      1* insert into t_blob values('01')
    SQL> /
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> select * from t_blob;
    SP2-0678: Column or attribute type can not be displayed by SQL*PlusBlob and clob columns content can be processed using DBMS_LOB
    package procedures and functions or using client's language (like Java)
    methods. See JDBC specification.
    Rgds.

  • Select * from table not working with Oracle OBDC driver

    Hello,
    In our web development we have been using the MS ODBC for Oracle
    driver to connect to our Oracle db. We decided to try the
    Oracle ODBC driver because it supports the commandTimeout
    property in ASP which the MS driver does not. The problem I'm
    running into now is that all of our select * from table
    statements appear not to be working. The Oracle ODBC driver
    version we are using is ver 8.00.05.00. Is there something that
    I'm not doing properly? If I take the same select * from table
    statement and name the columns, I dont get any error. Otherwise
    I'm getting a Subscript out of range error. It seems strange to
    me that this driver would not support a select * from table
    statement (which I''m told is the case by another developer
    here).
    Is there something I'm missing?
    Thanks,
    Pete

    I'm positive I have a connection. Otherwise I wouldn't get a
    response when I name the columns instead of using *.
    There must be something else that I'm missing or doing wrong.
    I've actually been looking into alternative ODBC drivers to see
    if I have the same problems but none that I have found support
    commandTimeout.
    Any other ideas?

  • Performace Which is better ?  : Bapi inside a loop OR Select from Tables

    Hi Gurus,
    I have a report which displays purchase info records.
    If I am selecting from tables i need to use EINA, EINE, EORD and some other tables.
    There is a BAPI which gets all purchase info records specific to a vendor , material , purchasing organisation.
    QUESTION: Performace wise which is the better Approach, either selecting from tables or BAPI for Purchase info records
    Regards
    Avi.

    Whether it using BAPI or select. you need to check the performance. If you have full key for these tables EINA, EINE, EORD  then mak a select outside of the loop and within loop use READ TABLE statement with binary search. of if you want multiple records within loop then use loop insdie loop.
    Your final objective is to minimise the database hits . If you use bapi inside loop then your database hits will be more
    select from EINA
    select from EINE
    select from EORD
    loop at itab,
      read table EINA
      read table EINE
      read table EORD
    endloop
    a®

  • Dynamic parameter selection from infoview not storing the sql password

    We are having the problem of dynamic parameter selection from infoview not storing the sql password as it does for the actual report. We are using Crystal Reports XI Release 2 version 11.5.3.438 (Not sure of SP level, asked in separate thread).
    To be more specific.
    We have created a report that dynamically populates the parameters of the report by pulling the records from the Informix sql database and allowing selection from there.
    In the Central Management Console for the report object we have set as follows:
    Process - Database:
    Use original database logon information from the report - the sql username and pw etc
    Use same database logon as when report is run
    Process - Parameters
    In selecting a default selection there is the option to put in the sql password, however, this does not stick and clears after update.
    As such the end result is that every time this report is run from infoview and a user chooses a parameter (there are 5), crystal goes through some timeout for about a minute or so and then requests the sql password, if a user then selects the next parameter, the same timeout and password dialog appears.
    We need the crystal report to handle to the sql password for fetching the parameters as well as for the database section of running the report, however, the parameters insists on the end user always putting the password in.
    This is 100% replicatable on our system.
    Any way that we can fix this?
    Will an update fix this issue? If so could you please advise which one?
    Thanks

    Hi,
    I am having the exact same problem. Any help?
    And what does "Use same database logon as when report is run" mean? For me that would be that no prompt is needed for getting values in a dynamic parameter...
    Regards
    Magnus

  • Special Grant to use "Select * from Table(cast..."??

    Hi,
    I've recently created the types and function to use the Table(Cast(funtion) as type)). It works fine, and gives me the correct result. I've granted execute on the types and on the function to a role that is enabled for a user, but when the user tries to use the "select * from table(cast(function) as type))", he gets a "ORA-01031: Insufficient Privileges" error message. Is there any other grant that must be given to the role, so that the user can execute the select?
    Thanks in advance!
    Daniel

    Hi Kamal,
    I'm not sure what anonymous PL/SQL block means. When I (or the user) try to run the select, I enter all the information, i.e., the owners for the type and function: "select * from table(cast(a.my_function(my_argument) as a.my_type))". I'm trying to use SQLPlus at this time, and I have Oracle 8i.
    I didn't to explicitly grant execute to the user because that would go against some rules I have to follow... I'll se if I give it a try though!
    Thanks!

  • Expression Framework / SELECT * FROM TABLE(CAST(...

    Hello!
    Is it possible to build the following with Toplink Expression Framework?
    Example:
    CREATE TYPE TY_OB_TEST AS OBJECT
    ( SYSTOP_NR NUMBER(5,0)
    SYS_NR NUMBER(5,0)
    IM_SYS_NAME VARCHAR2(80) ) ;
    CREATE TYPE TY_TB_TEST AS TABLE OF TY_OB_TEST;
    Package1.FUNCTION1 returns Type TY_TB_TEST.
    SQL:
    select * from TABLE(CAST(PACKAGE1.FUNCTION1(42)) AS TY_TB_TEST ));
    thank you!
    Harald.

    Nope, just use SQL.
    - Don

  • Insert into table a (select * from table b) - need pk?

    Hi there.
    I'm going to insert into table FINAL (select * from table STAGING) - same structure but in STAGING the ID column has nulls.
    Do I need to provide the ID (primary key) for table FINAL or will it get created based on sequence/trigger?
    If I were doing this in a loop I'd get the next val from the sequence but on a simple insert, I'm curious.
    thanks!

    hmm.. what is ?
    it didn't like it.
    Error(11,4): PLS-00103: Encountered the symbol "[" when expecting one of the following:     begin case declare exit for goto if loop mod null pragma    raise return select update while with <an identifier>    <a double-quoted delimited-identifier> <a bind variable> <<    close current delete fetch lock insert open rollback    savepoint set sql execute commit forall merge    <a single-quoted SQL string> pipe
    9i, sqldeveloper                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Select * from table as of Scn fails in powercenter

    Hi all, I have written the below query in SQL override of a Powercenter mapping. This fails with 'FROM keyword not found where expected' error. Can you please suggest how else I can fetch last committed data from my source?Select * from table AS OF SCN <Scn no>

    Hi All, I have multiple flat files which i need to load in a single table.I did that using indirect option at session level.But need to dig out on how to populate substring of header in name column in target table. i have two columns Id and Name. in all input file I have only one column 'id' with header like H|ABCD|Date. I need to populate target like below example. File 1                                    File2     H|ABCD|Date.                      H|EFGH|Date.1                                            42                                            5  3                                            6 Target tale: Id    Name1     ABCD2     ABCD3     ABCD4     EFGH5     EFGH6     EFGH can anyone help on what should be the logic to get this data in a table in informatica.

Maybe you are looking for