Dynamic File name in IR bypass scenario

Hi All,
i have a scenario , where i am bypassing my IR part.
i need to transfer image files from one location to another.
Now i need to create the Directory as current date and Filename with what i have in sender file name.
Any clue guyz?

Hi Sam,
As for the file name, you can make use of the Adapter Specific Message Attributes available in the Advanced tab of the sender and receiver communication channels to pass through the name of the source file and assign the same name to the target file.
In the source communication channel, please check the following check boxes:
1. Set Adapter Specific Message Attributes
2. File Name
In the receiver communication channel, please check:
1. Set Adapter Specific Message Attributes
2. Fail if Adapter Specific Message Attributes missing
3. File Name
This will enable you to pass throught the file name without the need to create any IR objects.
Regards,
Jyotika.
Edited by: Jyotika Manghani on Dec 10, 2010 7:18 AM

Similar Messages

Dynamic file name from input payload (RFC 2 flat file)

Hi,
I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
What can I do?

Hi Marshal,
You can add a extra node to your target strucutre like
FileName- Node
--FileName - Element.
do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this field path at Refrence in variable subtituion.
In the Content converison add the Name & Values as below
FileName.fileldNames -- FileName
FileName.fieldFixedLengths -- 0
FileName.fixedLengthTooShortHandling -- Cut
So the extra field in u r target structure would not populate in u r target text file.
Cheers
Veera

Dynamic file name in case of .txt output files

Hi all,
I have a query related to dynamic file name scenario.
In case of IDOC-XI-FILE sceanrio,
Is it possible to generate .txt file name based on Plant number like
%<Plantname>%_%<BusinessDay>_filename.txt
Note:I have implemneted this for .xml output files but I am not able to implement it for .txt output files .
PLEASE HELP ME .
Regards
Prabhat

Hi Prabhat,
I think, the normal Dynamic File Name generation should work fine in your case also. Even if you perform Content Conversion, you can use Variable Name Substiution to create your Destination file name as, the name of the file is determined first and only then is the content converison perfromed.
for info on content conversion, I would suggest that you go through this thread and check my reply,
Re: Dynamic File Name for Receiver File Adapter
Regards,
Bhavesh

Dynamic File Name depending on the Source File name

Hi Experts,
I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
Source File name Targer Folder/Filename
NK01.VR59.L2007030 VR59/Rec.l200
NK01.VR71.L2017030 VR71/Rec.l201
NK01.VR77.L2027030 VR77/Rec.l202
See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
Points will be rewarded for Valuable anwer.
Thanks in Advance,
Best Regads,
Vijay

Hi VIjay,
Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " " statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
I am getting the following error in End to End error Scenarios:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

How to give a dynamic File Name for Receiver File/FTP Adapter.

Hi Experts,
    I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
    therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
    How to do this ?
    for your info we are using ABAP Mapping.
    Pl help me
Regards,
Umesh

Hi Umesh,
      Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful

Dynamic file name inside the ZIP file

Hi Experts,
I have done proxy to file scenario, reciever side is the file ZIP file, i have done successfully done Zip file using adapter modules in Communication Channel.
The file name is hard coded like this.
contentType-----Transform.ContentType--
text/plain;charset="UTF-8";name="Billing.txt"
Is there any possible to do dynamic file name instead of hardcoded like add time stamp.
Kind Regards,
Praveen.

hi,
you can always do it using an adapter module like shown in my blog:
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
Regards,
Michal Krawczyk

Dynamic File Name on Receiver Side using XSLT mapping

Hi,
My scenario is a Proxy to File scenario.The File on the receiving side is a TEXT file generated due to XSLT mapping. The file name has to be dynamic like- TEST<DDMMYYHHMMSS>File.DAT.
If somebody knows how to do the same please help.
Regards
Ritu

Hi Ritu,
I agree to Krishna.With your XSLT mapping create a XML output which can be converted to a text file with content conversion.
And for the dynamic file name, i guess its the date that matters which needs to be in DDMMYYHHMMSS format. the same can be accomplished by a Java function and calling it in your XSLT .
Do refer this weblog it will help you accomplish the same.
>>> /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
Regards,
Shabarish

Dynamic file name while sending to target FTP

Hi Experts,
we have a scenario wherein we are trying to implement dynamic file names.
The scenario is IDOC to file, and we need to append the data corresponding to all the IDOC triggered n a daily basis.
Its like the file abc_01will contain data for day 1(data of oll the IDOC in that day).For day to we need to dynamically name the file as abc_02 and so on.
But before naming the file as abc_02 we need to check if abc01 is present or not .If abc_01 is not present then for day 2 file we need to give the name as abc_01 and so on_.This condition is need to be checked becasue there may be the case that a file may not be picked by the script running at the target system.
can anyone let me know how to check whether file are correctly picked at target.
Regards,
srinivas.

Hi Srinivas,
I think you can achieve this with the next scenario:
- For getting all the Idocs info, you need a ccBPM to collect them, and then, download them to a file.
- To dynamically put the filename, you need to use Dynamic Configuration at the File Receiver Adapter (in the Message Mapping, you can write a UDF.)
- And to check if the daily file exists, you can also write an UDF and then decide the name of the output file.
Hope this helps,
Regards,
Juan

Dynamic file name ?

Hi,
I am following this blog to name the target file/directory dynamically at the runtime :
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
But I am getting this error in the CC monitoring :
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'interface_name ' for variable 'var1'.

Hi,
Try following this weblog for dynamic file name.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Dynamic filename come under the Dynamic configuration in moni, for your messages.
This is the code used inside.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
That is why Dynamic configuration is coming in output.. It is a class to generate dynamic configuration file at runtime provided by SAP XI.
Hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

Dynamic File name in File Adapter

Hi,
I have a requirement to pass dynamic file name in File Adapter.
Is there any way to pass a variable for the file name attribut in file adapter.
I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
regards
Saiju

Hi Saiju,
Yes there is.
Assign your file name to a variable, let's say 'fileName'.
Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
That's it... (assuming you are using 11g)
Arik
Edited by: Arik on Jun 27, 2012 3:12 PM

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
 message1
 SD01_E
 FileName
 row
 message2
 SD02_E
 FileName
 row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Dynamic File Name - UDF

Hi Master,
I written the UDF for Getting the Dynamic File name.
DynamicConfiguration conf = (DynamicConfiguration) container.getParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// Retrieve the filename
String FileName = conf.get(key);
This is working ok - but I want to return these values so I can be used in mapping.
when I try to add the statement return FileName; , the compiler then complains with the following error:
cannot return a value from method whose result type is void return FileName;
Please help me,
Thanks,
Anu

Thanks Nithiyanandam,
I am using the Same code. But i am getting the Syntax error:
Source code has syntax error: E:/usr/sap/DX1/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapaf708c00d6bb11dd83ee00101816a382/source/com/sap/xi/tf/_MM_I_FF_O_RFC_.java:13: cannot resolve symbol symbol : class variable location: class com.sap.xi.tf._MM_I_FF_O_RFC_ variable a; ^ 1 error
UDF Name: FileName
while creating the UDF, I select the first radio button(Value). not Context and Queue.
I written the below code.
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "FileName");
String FileName = conf.put(key, a);
return FileName;
Thanks,
ANU

Dynamic File Name and File size

Hi All
I need some help in calling Dynamic File Name and Dynamic File size of a file in my adapter Module.
Could you please provided some help on the same?
I have tried the same through UDF it is working. Could anyone provide me the steps for the same
Regards
Abhishek Mahajan

Hi,
You can use the already available adapter module "DynamicConfigurationBean". Have this adapter module at the top of the module list in CC.
Have the parameter value as insert http://sap.com/xi/XI/System/File FileName and http://sap.com/xi/XI/System/File SourceFileSize (corresponding to the key names)
For more info:
http://help.sap.com/saphelp_nw04/helpdata/en/45/da2239feb22e98e10000000a155369/frameset.htm
There is also a SAP note available for the same....dont remember the note number:(.....
Regards,
Abhishek.

Xml file in dynamic file name in file receiver adapter

Hi,
I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
Does anybody have the solution to my problem? thanks in advance

Thank you Raj for the direction
The way to do it is :
1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
2. Put a "*" on the file name scheme
3. In IR, create a UDF to set up target file name :
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// set up file name for receiver adapter
String SourceFileName = conf.get(key);
conf.put(key, TargetFileName);
return " ";
4. Map the above UDF to the header level of the target structure.
Regards,
Idi

Dynamic file names in outbound file adapter

I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

Dynamic File name in IR bypass scenario

Similar Messages

Maybe you are looking for