Dynamic FIle Name JAVA code
Hi Guys,
he requirement is to get File Name as XYZ.ddmmyyyy where as XYZ is constant.
To achive this I am writing UDF in message mapping with dynamic configuaration below is the code:
While I was trying to test end to end it is giving Runtime Exception in message mapping. please advice if this code needs correction?
I have mapped as Source Main Node .....> UDF > Target main node correct if it is wrong.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
DateFormat dateFormat = new SimpleDateFormat("ddMMyyyy");
Date date = new Date();
String filename = "XYZ" + dateFormat.format(date);
conf.put (key,filename);
return null;
Thanks.
Hi ,
Please try replacing this line
DateFormat dateFormat = new SimpleDateFormat("ddMMyyyy");
with this line
java.text.SimpleDateFormat dateFormat = new java.text.SimpleDateFormat("ddMMyyyy");
Hope this solves your problem.
regards
Anupam
Similar Messages
-
Read SSH (Unix) dynamic file through Java code
Hi,
I am trying to create a java code which should read the dynamically changing content in the unix(SSH) system.
Could you please tell me which is the best way to create the above requirement.
Thanks in advance...corlettk wrote:
but there are perl libraries... and (I was dumbfounded) a java-embedded-in-perl compiler. I feel a mashup delegate layer coming on.JCraft's JSch is, however, IMHO, a very good, flexible, and reliable implementation of SSH2 protocol (OpenSSH key formats). It allows your program to become an SSH client.
Edit: And to tell you the truth, the Perl Net::SSH module is simply a wrapper around OpenSSH's libraries, and the Net::SSH::Perl Module (which is complete Perl although many of the Encryption modules need to be compiled, at least on Unix) are much more complicated to get installed, if not necessarily used, than JSch is.
Edit Again: Although knowing the OP's history, I very much doubt his ability to implement either solution. ;-) -
Hi Master,
I written the UDF for Getting the Dynamic File name.
DynamicConfiguration conf = (DynamicConfiguration) container.getParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// Retrieve the filename
String FileName = conf.get(key);
This is working ok - but I want to return these values so I can be used in mapping.
when I try to add the statement return FileName; , the compiler then complains with the following error:
cannot return a value from method whose result type is void return FileName;
Please help me,
Thanks,
AnuThanks Nithiyanandam,
I am using the Same code. But i am getting the Syntax error:
Source code has syntax error: E:/usr/sap/DX1/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapaf708c00d6bb11dd83ee00101816a382/source/com/sap/xi/tf/_MM_I_FF_O_RFC_.java:13: cannot resolve symbol symbol : class variable location: class com.sap.xi.tf._MM_I_FF_O_RFC_ variable a; ^ 1 error
UDF Name: FileName
while creating the UDF, I select the first radio button(Value). not Context and Queue.
I written the below code.
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/File",
"FileName");
String FileName = conf.put(key, a);
return FileName;
Thanks,
ANU -
Dynamic file name from messsage payload
Hi Friends,
My requirement is to read one .xml file , which has Purchase Order deatails and place .html file on receiver side, we are using XSLT for mapping.
The file name should be "POnumber.html " , i've gone through below but couldn't get much
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Can any one send the that code , and steps to add that code in side XSLT.
Thanks
JohnHi,
With above links
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
See in the below Michal blog , how to conver the file as html , take that part only.
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Regards
Chilla -
Dynamic file Name Generation-problem
Hi Friends..
in My Idoc to File..
i want to generate Dynamic File Name ..
i put the logic in Message mapping -java intialization section
Container container = null;
SimpleDateFormat simpledatFormat = new SimpleDateFormat("yyyyMMdd");
Date date = new Date();
String datewithYear = simpledatFormat.format(date);
SimpleDateFormat simpledatFormat1 = new SimpleDateFormat("HHmmss");
Date date1 = new Date();
String datewithMs = simpledatFormat1.format(date1);
DynamicConfiguration conf = ((DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION));
DynamicConfigurationKey key = DynamicConfigurationKey.create("http:/"+"/"+"sap.com"+"/"+"xi"+"/"+"XI"+"/"+"System"+"/"+"File" , "FileName");
String oldFileName=conf.get(key);
String valueNew;
if( oldFileName == null){
valueNew = "HRXML"+datewithYear+datewithMs+".xml";
else{
valueNew =oldFileName+datewithYear+datewithMs+".xml";
//set the new filename
conf.put(key, valueNew);
and i did in reciever File adaper adaper specific settings..
i am getting error sxmb_moni..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_ZHRMD5_to_HRMasterData_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>java.lang.NullPointerException</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_ZHRMD5_to_HRMasterData_MM_: java.lang.NullPointerException</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
if we remove the dynamic File configuration logic in message mapping ..i am getting the result..
please guide me..Container container = null;
DynamicConfiguration conf = ((DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION));
bound to get a NPE as your variable container is not getting intialized to a valid object ref here... -
How to modify an existing xml file from java code.
Hi
I have worked on creating a new xml file from java code using xmlbeans.But if i try to modify an already existing file using java code I am unable to get errorfree xmlfile.
For example if xml file(studlist.xml) is as below:
<?xml version="1.0" encoding="UTF-8"?>
<StudentList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="D:\kchaitanya\xmlprac1\abc\Studlist.xsd">
<Student>
<Name>ram</Name>
<Age>27</Age>
</Student>
<Student>
<Name>sham</Name>
<Age>26</Age>
</Student>
</StudentList>
Now suppose i have set name to victor using student.setName,
and set age to 20 using setAge from javacode,
the new xml file is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<StudentList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="D:\kchaitanya\xmlprac1\abc\Studlist.xsd">
<Student>
<Name>ram</Name>
<Age>27</Age>
</Student>
<Student>
<Name>sham</Name>
<Age>26</Age>
</Student>
</StudentList>
<Student>
<Name>victor</Name>
<Age>20</Age>
</Student>
As observed this is not a valid xml file.But how can i modify without any errors?I know it's an old post, but I found this while doing a google search for something else, and don't like to leave it un-aswered
Just in case anyone has a similar problem... In this case the new elements have been appended outside of the root element
What you need to do is first get the root element and then append the new children to that, there are several ways of getting the root element, which depend on what you want to do with the elements you get back here's a simple (incomplete) way.
// gets the root element of the specified file (code not shown)
Element rootElement= new SAXReader().read(file).getRootElement();Then just append the new elements as below (this is non-generic code and would need to be modified for your situation)
// write a new student element
Element student = document.createElement("Student"); // creates the new student
rootElement.appendChild(student); // ***appends it to the root element***
Element name = document.createElement("Name"); // creates the name element
name.appendChild(document.createTextNode("Fred")); // adds the name text to the name element
student.appendChild(name); // appends the name to the student
Element age= document.createElement("Age"); // creates the age element
age.appendChild(document.createTextNode("26")); // adds the age text to the age element
student.appendChild(age); // appends the name to the studentThen flush ya buffers or whatever and write the file
Edited by: Dream-Scourge on Apr 23, 2008 11:10 AM -
Hi,
I am following this blog to name the target file/directory dynamically at the runtime :
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
But I am getting this error in the CC monitoring :
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'interface_name ' for variable 'var1'.Hi,
Try following this weblog for dynamic file name.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Dynamic filename come under the Dynamic configuration in moni, for your messages.
This is the code used inside.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
That is why Dynamic configuration is coming in output.. It is a class to generate dynamic configuration file at runtime provided by SAP XI.
Hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful -
Dynamic File Name depending on the Source File name
Hi Experts,
I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
Source File name Targer Folder/Filename
NK01.VR59.L2007030 VR59/Rec.l200
NK01.VR71.L2017030 VR71/Rec.l201
NK01.VR77.L2027030 VR77/Rec.l202
See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
Points will be rewarded for Valuable anwer.
Thanks in Advance,
Best Regads,
VijayHi VIjay,
Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " " statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
I am getting the following error in End to End error Scenarios:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
How to give a dynamic File Name for Receiver File/FTP Adapter.
Hi Experts,
I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
How to do this ?
for your info we are using ABAP Mapping.
Pl help me
Regards,
UmeshHi Umesh,
Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful -
File Adapter: Dynamic file name
Hello,
I would like to use a filename like this:
Name.<DOCNUM>.Direction.<Timestamp>
For DOCNUM I use variable substitution. Works fine.
For <Timestamp> I need a different format as the timestamp function
in file adapter create. So I try to set up my timestamp in mapping like
dynamic file name:
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Timestamp");
conf.put(key1, a);
Input a is date function which creates my desired timestamp format. In file adapter I try this:
Name.%DOCNUM%.Direction.%Timestamp%
or
Name.%DOCNUM%.Direction.Timestamp
or
Timestamp
all doesn't work for Timestamp.
So is there a possibility to configure a dynamic filename like this???
Is there a possibility to access dynamic configuration variables in dynamic filename except
the known for filename and directory??
thanks
chris
Edited by: Christian Riekenberg on Mar 10, 2009 4:02 PM
Edited by: Christian Riekenberg on Mar 10, 2009 4:05 PMyour file name needs to be
Name.<DOCNUM>.Direction.<Timestamp>
dont use variable substitution. use only dynamic configuration and set the file name
introduce a logic that will create the string
Name.<DOCNUM>.Direction.<Timestamp>
eg. String filename = "Name" + var_docnum + "Direction" + var_timestamp;
then use the dynamic conf code to set the file name and use adapter specific properties in you adapter to retrieve it.
Ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm -
Dynamic file name(Context)
Hello All,
I am using Dynamic file name function in my message mapping. Below is the code that I am using inside UDF:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String fileName = conf.get(key);
return fileName;
Now the questions is as per my requirement, I need to generate multiple file names. Can some one help me how can change the above code for catering multiple returns
Thanks
Regards
MoorthyHello,
Now the questions is as per my requirement, I need to generate multiple file names. Can some one help me how can change the above code for catering multiple returns
If you are using multi-mapping (0..n), only one will be accessed. See link below from SAP Help
http://help.sap.com/saphelp_nw70/helpdata/EN/43/09b16006526e72e10000000a422035/frameset.htm
Or you can use variable substitution for filename generation (search in SDN).
Hope this helps,
Mark -
Dynamic file name in communication channel
hello
is it possible to give in the communication channel, under the 'File Access Parameters', a dynamic file name?
to get it out of a table or something?
Thanks
KfirHi,
Yes its bit possible to use the dynamic file name at File access paramters
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Refer below links for more in depth details about it
Re: Dynamic file name in Receiver File Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Check out this URL
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Check these weblogs as well...
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
Thanks
Swarup -
Dynamic File Name on Receiver Side using XSLT mapping
Hi,
My scenario is a Proxy to File scenario.The File on the receiving side is a TEXT file generated due to XSLT mapping. The file name has to be dynamic like- TEST<DDMMYYHHMMSS>File.DAT.
If somebody knows how to do the same please help.
Regards
RituHi Ritu,
I agree to Krishna.With your XSLT mapping create a XML output which can be converted to a text file with content conversion.
And for the dynamic file name, i guess its the date that matters which needs to be in DDMMYYHHMMSS format. the same can be accomplished by a Java function and calling it in your XSLT .
Do refer this weblog it will help you accomplish the same.
>>> /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
Regards,
Shabarish -
Split XML in Multiple XML files with Java Code
Hi guys , i have following xml file as input ....
<?xml version="1.0" encoding="ISO-8859-1"?>
<T0020
xsi:schemaLocation="http://www.safersys.org/namespaces/T0020V1 T0020V1.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.safersys.org/namespaces/T0020V1">
<INTERFACE>
<NAME>SAFER</NAME>
<VERSION>04.02</VERSION>
</INTERFACE>
<TRANSACTION>
<VERSION>01.00</VERSION>
<OPERATION>REPLACE</OPERATION>
<DATE_TIME>2009-09-01T00:00:00</DATE_TIME>
<TZ>CT</TZ>
</TRANSACTION>
<IRP_ACCOUNT>
<IRP_CARRIER_ID_NUMBER>274845</IRP_CARRIER_ID_NUMBER>
<IRP_BASE_COUNTRY>US</IRP_BASE_COUNTRY>
<IRP_BASE_STATE>AR</IRP_BASE_STATE>
<IRP_ACCOUNT_NUMBER>55002</IRP_ACCOUNT_NUMBER>
<IRP_ACCOUNT_TYPE>I</IRP_ACCOUNT_TYPE>
<IRP_STATUS_CODE>100</IRP_STATUS_CODE>
<IRP_STATUS_DATE>2007-11-06</IRP_STATUS_DATE>
<IRP_UPDATE_DATE>2009-08-03</IRP_UPDATE_DATE>
<IRP_NAME>
<NAME_TYPE>LG</NAME_TYPE>
<NAME>A P SUPPLY CO</NAME>
<IRP_ADDRESS>
<ADDRESS_TYPE>PH</ADDRESS_TYPE>
<STREET_LINE_1>1400 N OATS</STREET_LINE_1>
<STREET_LINE_2/>
<CITY>TEXARKANA</CITY>
<STATE>AR</STATE>
<ZIP_CODE>71854</ZIP_CODE>
<COUNTY>MILLER</COUNTY>
<COLONIA/>
<COUNTRY>US</COUNTRY>
</IRP_ADDRESS>
<IRP_ADDRESS>
<ADDRESS_TYPE>MA</ADDRESS_TYPE>
<STREET_LINE_1>P O BOX 1927</STREET_LINE_1>
<STREET_LINE_2/>
<CITY>TEXARKANA</CITY>
<STATE>AR</STATE>
<ZIP_CODE>75504</ZIP_CODE>
<COUNTY/>
<COLONIA/>
<COUNTRY>US</COUNTRY>
</IRP_ADDRESS>
</IRP_NAME>
</IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
</T0020>
and i want to take this xml file and split it into multiple files through java code like this ...
File1.xml
<T0020>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
</T0020>
File2.xml
<T0020>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
</T0020>
like wise...
Each xml file contain maximum 10 or 15 IRP_ACCOUNT.
Can somebody please help me ? How can i do it with stax like start element and all ?
thanks in advance.Ah, sorry, strike that. You want multiple files. I think the easiest way is to simply parse with DOM. [http://www.w3schools.com/xpath/default.asp] . And here [http://www.w3schools.com/xpath/default.asp].
You can output the various XML elements using a PrintWriter or creating a separate DOM document for each file you want to create and serializing that.
- Saish -
How can I using functions implicit in dll file in java code ?
How can I using functions implicit in dll file in java code ?
I'm developing a program that interfacing with fingerprint hardware.
I have the finger print already, and I have to the SDK that have all functions for managing this fingerprint.
These SDK functions are represented in dll files.
I want to know how can I use these functions in java code .
I looked on this link of sun forums :
http://forum.java.sun.com/thread.jspa?threadID=305171&messageID=1215613
but I don't Understand the meaning of native code.
Thanks for help.please please please please please please please please help me:
After reading a lot of articles, tutorials, and overviews about JNI (Java Native Interface)
I found that these steps
1. Develop the Java code
2. Compile the Java code to a class file
3. Generate the header file
4. Implement the native method
5. Create the shared library or DLL
6. Run the Java program
Is the common steps in JNI development
The most powerful link was
http://java.sun.com/docs/books/jni/html/start.html
and
http://www.netbeans.org/kb/55/beginning-jni-part2.html
and the pdf oh this link
http://www.ibm.com/developerworks/edu/j-dw-javajni-i.html requiring IBM registration to download it.
But I have already the DLL, and want to the stright forward way to use its functions by java code only.
I don not to write any C++ code .
Is this possible???????????????????????????????
The name of these dll is �zkemsdk.dll�
It developed by ZKSOFTWARE company for managing a finger print �NP1500A�of
http://www.napcogulfsecurity.com/finger_print.asp
thanks for help
Maybe you are looking for
-
Powershell use Connection String to query Database and write to Excel
Right now I have a powershell script that uses ODBC to query SQL Server 2008 / 2012 database and write to EXCEL $excel = New-Object -Com Excel.Application $excel.Visible = $True $wb = $Excel.Workbooks.Add() $ws = $wb.Worksheets.Item(1) $ws.name = "GU
-
Add a new button in BP_HEAD_SEARCH
Hi Experts, My requirement is to add a new button and disable GROUP button in MainSearchResult view of BP_HEAD_SEARCH component.The steps i followed are.. 1.Created a Enhancement set in BSPWDVC_CMP_EXT and assign it to BSPWDV_EHSET_ASG in SM30. 2.En
-
NAT settings Moderate can't get to Open
I have spent 6 hours trying every tip I could find in past Apple Support Communities, Google searches, etc and while I can connect to XBOX live it is still giving me a NAT moderate setting warning. My modem is an Actiontec GT701-WG and my router is T
-
hi, SELECT hp.party_name CustomerName, csi.incident_number SRNumber, csi.incident_date SRDate, csi.close_date SRCloseDate, mtl.concatenated_segments SRItemName, csi.summary Summary, csi.problem_code, csi.incident_address SRAddress, cs
-
I have a question about the filter hud in aperture 3.
I have a large project (4000 images) and I can't display filter hud. The hud shows in all my other projects (including albums that are part of this project) but not when I am at the project level. can anyone suggest a solution?