Dynamic file name while sending to target FTP

Hi Experts,
we have a scenario wherein we are trying to implement dynamic file names.
The scenario is IDOC to file, and we need to append the data corresponding to all the IDOC triggered n a daily basis.
Its like the file abc_01will contain data for day 1(data of oll the IDOC in that day).For day to we need to dynamically name the file as abc_02 and so on.
But before naming the file as abc_02 we need to check if abc01 is present or not .If abc_01 is not present then for day 2 file we need to give the name as abc_01 and so on_.This condition is need to be checked becasue there may be the case that a file may not be picked by the script running at the target system.
can anyone let me know how to check whether file are correctly picked at target.
Regards,
srinivas.

Hi Srinivas,
I think you can achieve this with the next scenario:
- For getting all the Idocs info, you need a ccBPM to collect them, and then, download them to a file.
- To dynamically put the filename, you need to use Dynamic Configuration at the File Receiver Adapter (in the Message Mapping, you can write a UDF.)
- And to check if the daily file exists, you can also write an UDF and then decide the name of the output file.
Hope this helps,
Regards,
Juan

Similar Messages

How to set attched file name while sending email through ABAP

Hi All- tell me how to set attched file name while sending email through ABAP.
regards...
Abhay

Sure, when you are adding your entry to the packing list, give the name in the obj_name field.
*File 2
mailbin = 'This is file 2'.
append mailbin.
data: start type i.
data: end type i.
start = tab_lines + 1.
describe table mailbin lines end.
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = start.
mailpack-body_num = end.
mailpack-doc_type = 'TXT'.
mailpack-obj_name = 'TEST2'. "<- RIGHT HERE
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
append mailpack.
Regards,
RIch Heilman

Dynamic file name while using java mapping

Hi All,
i need help.
I am using java mapping to convert xml file in zip file.
Now i need to set output file name as SiteId_TimeStamp.zip.
Site id is comping in xml file.
How can i do this?
I tried many thing but didnt get the solution..
As their is no message mapping so I am unable to use ASMA.
Please help.

Did you check the wiki? You just need to add the code into you java mapping..
Map mapParameters = (Map) transformationInput.getInputHeader().getAll();
   // a) Set Output File name
   mapParameters.put(DynamicConfigurationKey.create("http://sap.com/xi/XI/Dynamic",
                                                         StreamTransformationConstants.DYNAMIC_CONFIGURATION), "");
   DynamicConfiguration conf = (DynamicConfiguration) mapParameters.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
   DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
   //Depending on your requirement edit this logic. Here, NewDynamicName + CurrentDate will be output file name.
   DateFormat dateFormat = new SimpleDateFormat("yyyyMMdd");
   conf.put(key, ("NewDynamicName_" + dateFormat.format(new Date())) + ".pdf");

Dynamic File name in sender file adapter

Hello,
We have a requirement to pull files from our vendor's SFTP folder, the file will be pulled once a day however the file would remain in the folder for 45 days. The filename follows the pattern STL-20110425.01.002.TAB where the date keeps changing every day.
I could not see any option in the adapter to achieve this. Has anyone done it before? Please share your thoughts.
Best Regards
Arvind

Did you check this link...
Pick the file with dynamic name
Might be helpful

How to give a dynamic File Name for Receiver File/FTP Adapter.

Hi Experts,
    I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
    therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
    How to do this ?
    for your info we are using ABAP Mapping.
    Pl help me
Regards,
Umesh

Hi Umesh,
      Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful

Flat file name from Sender Side Dynamically into subject of Receiver Mail

Hi All,
         I am Using a file to Mail Scenario, My requirement is to get dynamically the file name from flat file of the Sender Side into Subject of Receiver Mail Adapter and attachment of file from the Sender Side. Can anyone help me out.
Thanks in Advance

Hi....
          You can write udf in the message mapping to get the Dynamic file name and map that to the subject of the receiver mail.
DynamicConfiguration conf = (DynamicConfiguration) param.get(
          StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey KEY_FILENAME = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
      // read value
      String Filename = conf.get(KEY_FILENAME);
Regards,
Leela

Dynamic file name ?

Hi,
I am following this blog to name the target file/directory dynamically at the runtime :
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
But I am getting this error in the CC monitoring :
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'interface_name ' for variable 'var1'.

Hi,
Try following this weblog for dynamic file name.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Dynamic filename come under the Dynamic configuration in moni, for your messages.
This is the code used inside.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
That is why Dynamic configuration is coming in output.. It is a class to generate dynamic configuration file at runtime provided by SAP XI.
Hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

How to create Same file names for source and target.

hi
Can any body send Procedure for below requirement.
how to create the dynamic file names for a source and save the file with same name in the Target, because it has to identify that which sender had sent the file and the target file should be again sent back to the customer as a link.
Please help me.
Thanks

Hi,
See the below link
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - sender file name as receiver file name
Regards
Chilla

How to read a file name and send it a particular reciever

Hi,
I have a scenario, where i am receiving a a file and based on the file name i have to decide who is the receiver and send it to that particular receiver.I do not have to do any mapping.
can someone suggest me how can I achieve this.
Thanks in advance.

HI This may help you.Let me know if not.
Step by Step Guide: XML File 2 XML File Scenario: Part I
Step by Step Guide: XML File 2 XML File Scenario: Part II
Converting XML to PDF using XI
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
"JAVA MAPPING", an alternate way of reading a CSV file
Dynamic File Name using XI 3.0 SP12 Part - I
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
Push Data to MVC Architectured application using XI
How to send any data (even binary) through XI, without using the Integration Repository
XI in the role of a FTP
The specified item was not found.
The specified item was not found.
The specified item was not found.
The specified item was not found.

Dynamic file name from input payload (RFC 2 flat file)

Hi,
I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
What can I do?

Hi Marshal,
You can add a extra node to your target strucutre like
FileName- Node
--FileName - Element.
do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this field path at Refrence in variable subtituion.
In the Content converison add the Name & Values as below
FileName.fileldNames -- FileName
FileName.fieldFixedLengths -- 0
FileName.fixedLengthTooShortHandling -- Cut
So the extra field in u r target structure would not populate in u r target text file.
Cheers
Veera

Dynamic File Name - UDF

Hi Master,
I written the UDF for Getting the Dynamic File name.
DynamicConfiguration conf = (DynamicConfiguration) container.getParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// Retrieve the filename
String FileName = conf.get(key);
This is working ok - but I want to return these values so I can be used in mapping.
when I try to add the statement return FileName; , the compiler then complains with the following error:
cannot return a value from method whose result type is void return FileName;
Please help me,
Thanks,
Anu

Thanks Nithiyanandam,
I am using the Same code. But i am getting the Syntax error:
Source code has syntax error: E:/usr/sap/DX1/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapaf708c00d6bb11dd83ee00101816a382/source/com/sap/xi/tf/_MM_I_FF_O_RFC_.java:13: cannot resolve symbol symbol : class variable location: class com.sap.xi.tf._MM_I_FF_O_RFC_ variable a; ^ 1 error
UDF Name: FileName
while creating the UDF, I select the first radio button(Value). not Context and Queue.
I written the below code.
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "FileName");
String FileName = conf.put(key, a);
return FileName;
Thanks,
ANU

Dynamic File Name depending on the Source File name

Hi Experts,
I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
Source File name                 Targer Folder/Filename
NK01.VR59.L2007030         VR59/Rec.l200
NK01.VR71.L2017030         VR71/Rec.l201
NK01.VR77.L2027030         VR77/Rec.l202
See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
Points will be rewarded for Valuable anwer.
Thanks in Advance,
Best Regads,
Vijay

Hi VIjay,
Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " " statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
I am getting the following error in End to End error Scenarios:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Xml file in dynamic file name in file receiver adapter

Hi,
I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
Does anybody have the solution to my problem? thanks in advance

Thank you Raj for the direction
The way to do it is :
1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
2. Put a "*" on the file name scheme
3. In IR, create a UDF to set up target file name :
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// set up file name for receiver adapter
String SourceFileName = conf.get(key);
conf.put(key, TargetFileName);
return " ";
4. Map the above UDF to the header level of the target structure.
Regards,
Idi

Dynamic file names in outbound file adapter

I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

Dynamic file name from messsage payload

Hi Friends,
My requirement is to read one .xml file , which has Purchase Order deatails and place .html file on receiver side, we are using XSLT for mapping.
The file name should be "POnumber.html " , i've gone through below but couldn't get much
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Can any one send the that code , and steps to add that code in side XSLT.
Thanks
John

Hi,
With above links
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
See in the below Michal blog , how to conver the file as html , take that part only.
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Regards
Chilla

Dynamic file name while sending to target FTP

Similar Messages

Maybe you are looking for