Dynamic Filter Settings

I have dynamically created a drop shadow for an mc in my
project. That's no big deal. The settings are not difficult,
either. This is the frustrating part - I cannot get the settings to
change on the fly and react to input. In this instance, I am using
a couple of equations to determine the distance between the mouse
and the mc and the resultant angle. I am trying to get the drop
shadow filter to use this data and alter its distance and angle
settings to react. So far, no dice. Any ideas?

Thanks a lot, mate. That worked perfectly.

Similar Messages

  • Filter Settings

    Am trying to install Photo Elements 9 onto my new Windows 2010 Program and it asks for changes to my filter settings.  How do I do this and at the same time set Photo Elements as my default for photos?

    Hi Marco,
    From your bapi Response-> draw the flow to table. In the table you would have the employeeUnit field already, add then a inputfield for Carclass.
    Click on the carclass field on the right side (Configure panel) -> then value -> double click on fx / Define expression - > You would see the pop-up of  Dynamic Expression Editor.
    =IF(@employeeUnit==K4,"compactclass",IF(@employeeUnit==K5,"upper class ","whatever"))
    You can use this filter if there are fewer employeeUnits....
    Good Luck,
    Dharmi

  • PPS dynamic filter creation - not your normal thing but we need a solution, dont think Performance Point can handle it!

    My challenge at the moment is that I need to create a dynamic filter. To explain this is a cascading filter but not your normal cascading filter,
    ie, Year/Month/day etc.
    Here we have a single Dimension, Organisation. It contains every level of a business,
    Site,
    Dept, 
    Company name,
    Division
    Holding
    Strategic Area
    From these as a default we have 4 built hierarchies with a different combination of the above.
    Activity (Strategic Area, Dept)
    Organisation (company Name, site, Dept)
    Sites (Division, Site)
    Holdings(Holding, Strategic Area, site, Dept)
    At any given time we have have additional Hierarchies created within the Dimension, further adding to the hierarchy list.
    We now have a challenge where we require our users to be able to in the first filter select the Hierarchy they want to use, ie, Holdings, Site, Organisation
    or Activity. This should then cascade to the second filter and contain the relevant hierarchy and levels as a multi select filter. Of course this also needs to be connected to number of graphs, charts and scorecards on the page, dynamically. 
    I have gone around the houses to get this to work but not having any luck. Tried the variety of filters available, MDX, member selection, tabular,
    SharePoint, and attempted to mix and match to get this to work. I cannot find a way but I don't believe this is not possible.
    If it is not possible we must look around for another front end solution for our BI Dashboards which I would prefer to avoid. Any response or suggestion
    would be much appreciated.
    Regards,
    Sheb

    Hi Sheb,
    Please check the articles below and see if cascading filter in PerformancePoint Dashboard can be help:
    http://technet.microsoft.com/en-us/library/hh272541(v=office.15).aspx
    http://www.dotnetcurry.com/showarticle.aspx?ID=872
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Materialized view with dynamic filter

    I have a query which has a dynamic filter in the where clause. Dynamic in the sense, the value in the where condition will be obtained only when the query is run.
    The user interface is Business Objects tool i am using, based on the user login variable, the query is formed. Is there a possibilty to create a materialized view using this query.
    The query looks like this. The part in BOLD section is the filter. This query is taking long time and hence i am going for materialized view. Please suggest a solution
    SELECT
    DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_5_DESC,
    SUM(case when PERIOD_DIM.FISCAL_PERIOD_NBR = ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_PERIOD_NBR ) and PERIOD_DIM.FISCAL_YEAR=( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR ) then SALES_FACT.NET_SALES_USD else 0 end),
    SUM(case when PERIOD_DIM.FISCAL_PERIOD_NBR= ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_PERIOD_NBR ) and PERIOD_DIM.FISCAL_YEAR=( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR )-1 AND PERIOD_DIM.FISCAL_DAY_IN_PERIOD BETWEEN 1 AND ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_DAY_IN_PERIOD ) then SALES_FACT.NET_SALES_USD else 0 end),
    SUM(case when
    PERIOD_DIM.FISCAL_YEAR=( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR ) then SALES_FACT.NET_SALES_USD else 0 end),
    SUM(case when PERIOD_DIM.FISCAL_YEAR= ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR )-1
    AND PERIOD_DIM.FISCAL_DAY_IN_YEAR BETWEEN 1 AND ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_DAY_IN_YEAR )
    then SALES_FACT.NET_SALES_USD else 0 end),
    SUM(case when PERIOD_DIM.FISCAL_PERIOD_NBR = ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_PERIOD_NBR )and PERIOD_DIM.FISCAL_YEAR=( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR ) then SALES_FACT.MUNITS_SOLD_QTY else 0 end),
    SUM(case when PERIOD_DIM.FISCAL_PERIOD_NBR= ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_PERIOD_NBR ) and PERIOD_DIM.FISCAL_YEAR=( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR )-1 AND PERIOD_DIM.FISCAL_DAY_IN_PERIOD BETWEEN 1 AND ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_DAY_IN_PERIOD ) then SALES_FACT.MUNITS_SOLD_QTY else 0 end),
    SUM(case when
    PERIOD_DIM.FISCAL_YEAR=( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR ) then SALES_FACT.MUNITS_SOLD_QTY
    else 0 end),
    SUM(case when PERIOD_DIM.FISCAL_YEAR= ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR )-1 AND PERIOD_DIM.FISCAL_DAY_IN_YEAR BETWEEN 1 AND ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_DAY_IN_YEAR )
    then SALES_FACT.MUNITS_SOLD_QTY else 0 end),
    SUM(case when PERIOD_DIM.FISCAL_PERIOD_NBR = ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_PERIOD_NBR ) and PERIOD_DIM.FISCAL_YEAR= ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR ) then
    SALES_FACT.CASES_SOLD_QTY else 0 end),
    SUM(case when PERIOD_DIM.FISCAL_PERIOD_NBR= ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_PERIOD_NBR )and PERIOD_DIM.FISCAL_YEAR=( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR )-1 AND PERIOD_DIM.FISCAL_DAY_IN_PERIOD BETWEEN 1 AND ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_DAY_IN_PERIOD ) then SALES_FACT.CASES_SOLD_QTY else 0 end),
    SUM(case when
    PERIOD_DIM.FISCAL_YEAR=( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR ) then SALES_FACT.CASES_SOLD_QTY
    else 0 end),
    SUM(case when PERIOD_DIM.FISCAL_YEAR= ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR )-1 AND PERIOD_DIM.FISCAL_DAY_IN_YEAR BETWEEN 1 AND ( DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_DAY_IN_YEAR )
    then SALES_FACT.CASES_SOLD_QTY else 0 end),
    DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR,
    DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_MONTH_NAME,
    DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_6_DESC,
    DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_7_DESC,
    DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_8_DESC,
    CONCAT (CONCAT(SHIP_TO_CUST_DIM.SOURCE_CUST_NBR,'-'),SHIP_TO_CUST_DIM.SOLD_TO_CUST_NAME),
    CONCAT (CONCAT(SHIP_TO_CUST_DIM.SOURCE_CUST_NBR,'-'),SHIP_TO_CUST_DIM.SHIP_TO_CUST_LOC_NAME)
    FROM
    DM_SALES.SALES_ORG_DIM,
    PERIOD_DIM,
    SALES_FACT,
    DM_SALES.CURRENT_DATE_PERIOD_DIM,
    SHIP_TO_CUST_DIM
    WHERE
    ( SALES_FACT.INVOICE_DATE_KEY(+)=PERIOD_DIM.PERIOD_KEY )
    AND ( SHIP_TO_CUST_DIM.SHIP_TO_CUST_KEY=SALES_FACT.SHIP_TO_CUST_KEY )
    AND ( SALES_FACT.SALES_ORG_KEY=DM_SALES.SALES_ORG_DIM.SALES_ORG_KEY )
    AND ( PERIOD_DIM.PERIOD_KEY<=DM_SALES.CURRENT_DATE_PERIOD_DIM.PERIOD_KEY )
    AND
    ( DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_5_DESC=(SELECT DM_SALES.SECURITY_HEADER.SALES_ORG_POSITION_DESC from DM_SALES.SECURITY_HEADER
    WHERE DM_SALES.SECURITY_HEADER.BOLOGIN = @VARIABLE('BOUSER')) ) AND
    ( PERIOD_DIM.FISCAL_YEAR>=DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR-1 )
    GROUP BY
    DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_5_DESC,
    DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_YEAR,
    DM_SALES.CURRENT_DATE_PERIOD_DIM.FISCAL_MONTH_NAME,
    DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_6_DESC,
    DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_7_DESC,
    DM_SALES.SALES_ORG_DIM.POSITION_LEVEL_8_DESC,
    CONCAT (CONCAT(SHIP_TO_CUST_DIM.SOURCE_CUST_NBR,'-'),SHIP_TO_CUST_DIM.SOLD_TO_CUST_NAME),
    CONCAT (CONCAT(SHIP_TO_CUST_DIM.SOURCE_CUST_NBR,'-'),SHIP_TO_CUST_DIM.SHIP_TO_CUST_LOC_NAME)

    You could potentially create a single materialized view that had no restriction on the BOLOGIN column and allow Oracle to use that materialized view to be used to satisfy requests from the different users. You may need to add appropriate indexes to the materialized view for that to be a reasonable option, depending on how many distinct BOLOGIN values you expect.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Applying presets causes filter settings to get corrupted if process version updated

    I have an ongoing problem with Lightroom 5.7 including earlier versions.  The problem occurs when editing photos which use previous process versions (ie, 2010).  My presets all have the Current Process version checked (as they should).  Whenever I apply any preset to a photo, the settings for existing filters get corrupted (reset to 0).  This includes my Graduated Filter settings, Adjustment Brush settings and Radial Filter settings.  Those filters and their masks remain on the photo but their parameters have all been set to zero.  I keep falling into this trap since it's natural to use my presets when making updates to photos.  Often I don't realize this occurred until it's too late. 
    As a work-around (inconvenient) I can first manually update to the current process by right-clicking the photo and saying Settings/Update to Current Process (2012).  Or by clicking the Lightening Bolt button in the upper right corner.  But this must be done prior to applying any presets and I typically for get as my database has tens of thousands of pics. Even a preset with just the Process Version set will cause the filter settings to be corrupted.  I'm not interested in applying a batch or Quick Develop process to all at once since I need to inspect each one as the process is updated.  It would be great if this could be fixed in a maintenance release since it keeps biting me.  I think it's important that this be fixed in LR 6.0 also.  No doubt it's messed up many user's photos without them realizing it.  Does anyone know a work-around so Presets can be used?
    System: Win7 pro 64 (current), 4.2 GHz i7, 12GB, Lightroom 5.7.

    In my opinion: not a good idea to convert old photos en-batch.
    Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
    There are more than one reason:
    * As you know, process conversion yields very different results (if photo has been substantially edited).
    * It takes some time to polish your PV2012 editing skills.
    * Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
    This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
    Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
    Rob

  • How to set a dynamic filter to a prompted one?

    Hello:
    I have a dashboard prompt whose values determine the columns for a constructed dynamic filter column using case statement.
    There is another dashboard prompt whose value determine the the values for the dynamic filter column.
    I have a need to set this dynamic filter to the operator 'is prompted'. According to the OBIEE documentation, the requirement for 'is prompted' filter is to have the dashboard prompt column match with the filter column.
    I currently use a presentation variable for the dashboard prompt column that gives the filter value.
    How do I make my dynamic filter to be prompted (for pre-filtering results as a default behavior) and subsequently use the presentation variable (derived from the dashboard prompt) if a user enters the appropriate prompt values?
    Here is an example:
    Dashboard prompt: Location Type-> (State, District, City) (The case statement on my filter determines the appropriate logical column State or District or City)
    Filter Value: Dallas (pv1)
    The dynamic filter will generate "City" = '@{pv1}' (Dallas in the above example)
    I want this dynamic filter to be set to 'is prompted' for pre-filtering results as a default behavior.
    Thanks for reading this far and looking forward to your suggestions.
    Regards
    Sankar Bala

    Please read this carefully, you may find what you are looking for:
    Dynamic dashboard prompts and columns used in multifunctional report, full guided navigation
    http://108obiee.blogspot.com/2009/08/dynamic-dashboard-prompts-and-columns.html
    Or this one:
    http://obiee101.blogspot.com/2009/04/obiee-dynamic-prompt-content.html
    Regards
    Goran
    http://108obiee.blogspot.com

  • WRT160N wireless MAC Filter settings reset on their own

    I recently purchased and setup a WRT160N router.  Having no real problems with router - it works fine with exception of the MAC filter settings.  I most often access the router config from an XP machine (used to initially setup the router) which is wired, as well as from a VISTA notebook that is wireless.  I am noticing that when I check the MAC filter settings, the previous setup is missing - meaning that all MAC addresses are gone, and the filtering option is removed.
    I have set this up numerous times, and VERIFIED that I click on save at the bottom of the page, verify I have enable checked, etc.  I am wondering if there is something I'm missing - the settings don't appear to "stay" - the filtering option simply disappears and returns to disabled.  I may answer my own question here (or point myself in the right direction), but is there a dependancy on some other setting that is causing my filter to "disappear" on me?

    Have you tried to reset your Router and Re-configure all the settings back on your Router? If not then Reset your Router and re-configure all the settings. If still doesn't work, then you need to upgrade the firmware of your Router. Download the latest firmware for your Router from the Linksys website, Go to http://www.linksysbycisco.com/US/en/support/wrt160n/downloads and select the proper version number of your Router and download and save the firmware on your computer.
    Login to the Routers GUI and click on the Administration tab and below click on the sub tab "Firmware Upgrade" and click on the browse button and select the firmware file and click on upgrade...Once the firmware upgrade is successful... Then you need to Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Filter settings in the receipts view

    Hi Gurus,
    i have a situation, in the Receipts view(/SAPAPO/RRP4) iam using a filter to display orders. but the filter settings are not saved, when i come out and re-enter the receipts view previous selections in the filter are reset.
    i would like to save these filter settings, how to achieve this..
    please share your ideas,
    Thanks

    Dear Friend,
    You create layout and save that layout. Next time you come to receipts view, select that layout.
    Then all your filters and other settings will be retained.
    Regards,
    Pankaj

  • How to add a dynamic filter in query panel

    I want to display the data in recent week, is it possible to add a dynamic filter in query panel?
    eg. filter--> actionDate >= CurrentDate - 7
    BO version: BOX I 3.1

    We are still trying to get this filter to work. Can anybody give us an example of how it should look on the sensor?
    The sensor filter that we would like to create should “exclude” any source IP, any source port to specific destination hosts on all destination ports (icmp has none) from capturing events and storing them in the event store on the sensor.
    This is the filter that we have so far on the sensor. What’s the problem with it?
    service event-action-rules rules0
    filters edit icmp-w-echo-filter-sensor-sensor-0-D
    signature-id-range 2100
    subsignature-id-range 0-255
    attacker-address-range 0.0.0.0-255.255.255.255
    victim-address-range a.b.c.x,a.b.c.y
    attacker-port-range 0-65535
    victim-port-range 0-65535
    risk-rating-range 0-100
    no actions-to-remove
    deny-attacker-percentage 100
    filter-item-status Enabled
    stop-on-match False
    no user-comment
    exit
    filters move icmp-w-echo-filter-sensor-sensor-0-D begin
    exit

  • How to retrieve dynamic filter value submitted from control query to .....

    How to retrieve dynamic filter value submitted from control query to broadcast query.....
    I'm trying to change the hierarchy version determined by a userexit variable in the broadcast query.
    The Hierarchy Version should be dependent on the input filter delivered by the bursting query.
    But how do I catch the dynamic filter value which has been submitted by the bursting query,
    with other words:  where does the bursting query store it's out put while sequentially starting the broadcast query value by value?
    BTW: the filter value from the bursting query appears under "dynamic filter values" in the information of the broadcast query...
    Any thoughts are welcome!
    Edited by: Heinrich Krupp on Jun 24, 2009 1:25 PM

    Further information,
    Report is used via webi only, not Xcelsius or Dashboard.
    Report is consuming BI Web Services.
    Although we can pass in prompt values to BI Services, I couldn't find if we could pass a variable or dimension object into this field. Anyone knows?

  • Middleware filter settings to block transactions from flowing into CRM

    Hi Experts,
    We have a requirement where in we need to stop the transactions from flowing to CRM from ECC based on the combination of transaction type and number range.
    Here is the detailed scenario:
    We have transaction types T1,T2 and T3.
    Number range of T1 is 1000 to 2000         
    Number range of T2 is 10000 to 20000.    
    Number range of T2 is 1000 to 2000         
    Number range of T3 is 1000 to 2000      
    Transactions T2 (With number range 10000 to 20000) and T3 are originating in ECC.
    Transactions T2 (With number range 1000 to 2000) and T1 are originating in CRM.
    We need transactions T1, T2 (With number range 10000 to 20000) and T3 to flow back to CRM from ECC, but not T2 (With number range 1000 to 2000).
    I tried to figure out a combination that I can enter in the middleware filter settings but couldn't get one.
    Any help in this regard would be highly appreciated.
    Thanks and Regards,
    Kris.
    Edited by: Kris on Jun 10, 2010 7:37 AM

    Hi Kris,
    Can you check if you can add the Number range filter value in Table SMOFFILFLD and then maintain the number range filter to restrict the T2 transaction type as per your scenario.
    Hope this helps.
    Regards,
    Chandrakant

  • Dynamic Filter not being refreshed

    I have a problem with a dynamic filter refreshing properly.
    In a 7.0 Bex Query,  I have a variable where I put in a Sales Rep.  Based on the Sales Rep entered ('Z_M1Y_SALESREP04' ), I have a user exit that reads that Sales Rep and goes and gets all their customers:
    IF i_step = 2.
        READ TABLE i_t_var_range
             WITH KEY vnam = 'Z_M1Y_SALESREP04' INTO ls_var.
    When I run this for the first time, lets say Sales Rep A, it goes out and gets all the correct customers (shown in the Dynamic Filters of the Information tab).  Now, if I change Sales Rep A to Sales Rep B, I am still getting Sales Rep A's customers.  Does anyone know why it still shows Sales Rep A's customers?
    Thanks,
    Patrick

    If your using BEx Web for executing this query, try deleting the cache on your browser before re-executing the query with the new Sales Rep. The other thing you may want to consider is adding the following code prior to the READ TABLE statement:
    CLEAR: ls_var.
    This will ensure that the variable being read into won't have any values in it before it's being populated.

  • Dynamic Filter on Hierarchical Column

    I have a parent-child hierarchy in my 11g Subject Area. I know it is possible to filter the hierarchical column using the Selection Steps and the “Select Members based on Hierarchy” option. But is it possible to dynamically filter the column using a Session Variable?
    My hierarchy is set up using the company’s department structure. The business need is for a line manager to have access only to data for their own departments, and any departments below in the hierarchy where applicable. A session variable in the repository knows who has logged onto OBI, and returns the relevant departments. Is it possible to use this variable to only display the relevant portion of the hierarchy?
    Thanks.

    Yes this is possible through external table authorization. Lets say you have hierrarchy table with different nodes in data warehouse. Lets consider w_hierarchy_d table for instance which has different columns like hier1_code, hier2_code etc. Create an external table with three different columns, username, hierarchynode, hierarchyvalue. Hierarchynode, gives the information on what level of hierarchy the user should be restricted, and the hierarchyvalue gives the actual value of the node user belongs to. Lets take a simple geography hierarchy as example;
    username hierarchynode hierarchyvalue
    user1 hier1_code Asia - Region
    user2 hier3_code florida - Office
    Using init block populate this data into session variables and create a filter on group/role like below:
    case when valueofnqsessionhiernode='hier1_code' then officetable.region
    when valueofnqsessionhiernode='hier3_code' then officetable.office
    end = valueofnqsessionhiervalue.
    I am positive the above model works as we implemented this before.
    Please Award points if helpful.
    Thanks,
    -Amith.

  • Dynamic Filter a Table using BI

    Hi All
    I need to be able to dynamically filter a table, VC can not do this, but is it possible to do it using BI?
    Jarrod Williams

    Hi,
    Using the Filter info-actor, it is not possible to use it dynamically.
    But as previously said, you can use the result of query as an input variable for the next query.
    JH

  • Dynamic filter on time characteristics on OLAP SAP BEX query based universe

    Dear all,
    I'm currently working on the integration between SAP NetWeaver BI 7.0 and SAP BusinessObjects XI 3.1 FP 1.5 via integration kit.
    I've built an OLAP universe on the top of a BW query based on a multiprovider that contains 10 infocubes.
    Everything works fine but I need to create a filter in the OLAP universe that allows to restrict data by current date (e.g. using TIME characteristic of Infocube such as 0CALDAY or 0CALMONTH). From that filter we could start creating other conditions to compare data to different time periods.
    I've already tried to use a SAP exit variable in  a BW query but this kind of object would restrict query data only by current date and for example it would be impossible to browse data by previous years (to bypass this problem we could use restricted key figures with different offsets but we have too many key figures in the query and the number of restrictions
    would rise exponentially). 
    In a relational DataBase we can do that using a "where condition" based on 'CURRENTDATE' (SQL DB2 syntax).
    Now, we need to apply the same logic but translated in MDX syntax. 
    Is it possible to enter a dynamic filter in the OLAP universe or just fixed or promt values ?
    Any advise?
    Thanks in advance.
    Best Regards.
    M.

    Hi Ingo,
    1) My question is: "How can I have to manage variable in BEX queries and in the UNIVERSE in order to obtain the maximum flexibility to create reports with measures on actual day (for example) without asking the user to promt a value ?"
    I want to use an unique BEX query to define an unique UNIVERSE. On this UNIVERSE I want to create many reports (actual day, previous day, and so on).
    If I restrict 0CALDAY with an EXIT variable then shall I be able to create a different restrictions on the same Universe based on 0CALDAY ?
    2) Another question is:
    Is it possible to insert an XML / MDX filter on the OLAP Universe with dynamic derivation of the system date ?
    For example:
    Instead of this:
    <FILTER KEY="[0FISCYEAR].[LEVEL01].[NAME]">
        <CONDITION OPERATORCONDITION="Equal">
            <CONSTANT CAPTION="Z12008"></CONSTANT>
        </CONDITION>
    </FILTER>
    Is it possible to insert a tag with a dynamic function to derive the system date ?
    Thanks in advance.
    Best Regards.

Maybe you are looking for

  • Problem with ECC 6.0 upgrade iseries

    Hello, We are upgradering our SAP 4.6c to ECC.6.0 on OS/400. This are the steps which i used to start the upgrade as shown in the Upgrade guide - SAP ERP Central Component 6.0 ABAP Support Release 3 Operating System and Database IBM i5/OS/IBM DB2 for

  • Linking/Grouping Text Fields with a Check Box Field

    Disclaimer: I know nothing about coding/scripting in Acrobat (or in any language, for that matter). I have 4 sets of text fields, call them A, B, C, and D. All of the fields in set A will have a value entered. There are 10 fields in set A while sets

  • DV capture to FFMpeg to Apple Media Segmenter with success?

    Has anyone been able to successfully send output from FFMpeg through the Media Segmenter? I'm capturing from DV on IEEE1394 with dvsave and passing the stream to a FIFO pipe. Then I read from that pipe with FFMpeg and transcode to mpegts with libx264

  • "save" option in layout vf05 is dimmed.

    Dear all... in Tcode: VF05  in menu bar under SETTING Layout (save) option is dimmed. what is the solution for this issue? please help many thanks

  • 2lis_03_s194

    hi experts This datasource supports only full load and also it does not support loading to ODS, so if i want to have some pseudo delta how to make it eventhough if we are not using the ODS. thanks and regards Sreedhar