Dynamic Flash based screensaver
Hi there!
We're looking at doing dynamic flash based screen savers and
I'm looking for some ideas/suggestions on:
1. How complex it is
2. Best way to source the content- xml, txt, etc.
Any help or advice you can give is greatly appreciated.
Thanks!
Hi
Yes create a flash file that reads in an XML file from the
server.
Then you can use Creator to make it into a screensaver.
http://creator.flashjester.com
Hope this helps.
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple
Similar Messages
-
How can I pubish SWF interactive magazine to flash based website? It's not working!
I hope someone can help me launch my first interactive magazine (SWF) to our website with ID 5. Okay, my hard copy mag came out great so then I started on the interactive edition. Everything was going swell with adding 3 short videos ( FLV ) and creating 3 slide shows. When I previewed it by exporting to SWF I could preview it in my browser fine. Page curls, fade in words (although the “hide until animated” options only works in two out of about 7 instances. (same settings) file:///C:/Users/lauralaptop/Documents/NEW%20PUBLICATION%20QUARTERLY%20JOURNAL%202011%20se pt%202/LIFE%20apr-may-june%202011%201st%20issue%20INTERACTIVE%20TRYOUT%20Aug%2031%204pm.ht ml
I then followed instructions from another Adobe exercise, exported it to Flash, went to Publish Settings, but of course when I pressed “publish” I didn’t get the same result as the teacher…I got an error message about text. I searched a forum with the same message I got and saw that making sure my text setting was set for Classic, solved someone else’s problem. So I did and was able to “publish”. But now, when I open either the SWF or HTML file, it’ just rapidly repeating the 12 pages in my file in a loop!
file:///C:/Users/lauralaptop/Desktop/LIFE%20apr-may-june%202011%201st%20issue%20INTERACTIV E%20TRYOUT%20Aug%2031%204pm.html
I have spent most of the summer self teaching myself InDesign CS5 (not easy!) and am excited to be able to put out an interactive SWF file that can be opened in a Flash player through our Flash based website. I feel like I’m just inches away for launch but now I’m getting frustrated. Isn’t this going to be possible?
Also, when I publish it in Flash, it creates a SWF file AND an HTML file. But on our website, I have only one option to make a link to a document OR an outside link to open a file. How does that work?
Many thanks for whoever can help me out here. This was supposed to be a spring issue. Had to change it to summer and now I guess it’s a fall launch!Thank you for your quick reply, Rob. Well, i can't open the link you gave me to mysite (got a 404 error), could you resend it?
Originally, I exported the file to SWF (player) and just tried to link that file from our flash based website. It opens fine, page curls fine, slide shows fine, but when you click on the photos with videos, page 5 (father and baby) and two others, the image disappears and only a white comes up to fill that area.
http://scpres.org/#/media-sermons-online/our-publications. Could you go to this link on our website to see what I mean? Go to the NEWSBREAK TRANSFORMS and click on the Life, Stories of Transformation.
Rob, here is where i have very limited knowledge: As I said we use a flash based (read very user friendly) web hosting company. When I am in the back end to upload the swf file, I have only one option - "attach a video, attach a document, attach a link" so how would I upload a "folder" with more than one item to the server?
I thought it would be considered a video since the SWF file says SWF movie, but when I when i try to upload as a video, it doesn't come up as importable. (am i sounding really stupid?) Maybe I should admit that yes, I'm an ID5 newbie AND yes, I'm no spring chicken but I have been working in CS2,3,4 for several years and now 5 and am quite proficient in the create aspect of Adobe products. It's just now the technical part about how to actually get my in work published to the site.There isn't anyone else in my company able to help me so I have to reach out to this forum!
I love ID and this is just my first effort but I'm looking forward to creating many more interactive magazines for my company.
Thanks for any help. -
Adobe Configurator and deprecated Flash-based panel support in Adobe CC products
Does Configurator 4.0 (or Configurator 3) support the creation of HTML5-based panels?
I received the following email from Adobe:
Photoshop CC, starting in the middle of 2014, will remove support for Flash-based extensions. All other Creative Cloud products have already marked Flash-based panel support as deprecated at this time, meaning no future enhancements or bug fixes will be coming for Flash-based extensions.
The current version of Photoshop CC already includes support for a new type of HTML5 based panel. We are currently working on a new version of Adobe Extension Builder designed specifically to support the creation of these HTML5 based panels. You can download a free preview here: http://labs.adobe.com/technologies/extensionbuilder3/.
Details about developing HTML5 extensions for Photoshop as well as for other Creative Cloud products are available in the Extension Builder pre-release program here: https://adobeformscentral.com/?f=6V6IgvE0yLQQ7bgadxNXaw . You can also join the Photoshop developers' prerelease program for details specific to Photoshop. If you're interested, please let me know and I will get you setup.
Will the panels created by Configurator 4.0 work in PS CC after the middle of 2014 when support for Flash-based extensions is removed from Photoshop CC? For that matter, will the panels created in Configurator 3.0 work in PS CC after the middle of 2014?I've carefully read all the posts here and would like to give my feedback on the whole question. I'm a professional retoucher and a teacher as well, and during my professional carrer I've built dozens of panels.
I do really take advantage of boosting my productivity with any customized panel, as automation is something that adds speed, reliability and dramatically reduce errors during repetitive tasks. Therefore, I can't live without it.
Now, I understand why Adobe wants to move towards HTML 5, but please give us the ability to keep our work at the same level of efficiency we currently have. Photoshop is not for amateurs, it's a professional software. And professionals must keep their productivity, for sure they can't afford any loss of it, especially in these times!
Moving from Flash to HTML 5 means rebuilding all the existing panels from scratch: how much this will cost to us in terms of time (and money) if we could have an HTML 5 version of Configurator? And how much, if we don't have a tool like Configurator at all? Three times, ten times as much? Maybe Adobe knows the answer, not me, I'm not a coder. But I'd like to know this answer.
Further, picture this: I've taught several classes for at least five intercontinental companies on how to build actions and organize them into panels for improving their productivity. Every time the response was the same: BOOM!
They had a huge speed improvement in their daily workflows, and started to build dozens of panels by themselves for any possibile use. It was like opening a Pandora's box for them (their words).
Every one who attended my classes, have taught the same topic inside their company and the reaction was always the same. So now, in every company in which I've taught building panels and actions, there are hundreds of panels for many different uses, all over the world. Of course, as 100% of them were specifically built for internal use, they shared the panels among them, but not outside their company.
Many of them who are now mid-advanced users, have written to me asking how they could keep their panels working correctly in the next CC version of Photoshop. I have no solution for them, unless many of them become coders. That's a bad answer, I must admit, but no way out right now.
Their reply to me was very straight: "well, we won't upgrade any copy of Photoshop until we can keep our panels working correctly for sure. For us is much more important being productive and efficient than upgrading to the latest version, if this means to lower our performance, no doubt."
Adobe wanted to integrate all their softwares into the Creative Cloud. So far so good, I'm for it. But when you decide to integrate everything saying to the world that "it's for the sake of a better productivity", then you must really integrate them. Otherwise people will think that it was only a commercial move. So why we can't build panels for the applications inside Muse, for example? It was introduced to allow people to build websites quickly and efficiently using HTML 5, taking care about the layout instead of investing too much time in coding.
Exactly what Configurator allowed to do. Focus on the result with minimal time cost, aka money cost.
World is running faster, therefore we need to work faster too. And without Configurator we won't. I can't disagree with all the people that won't upgrade Photoshop, if this means that they'll work slower because they can't use their panels carefully made by themselves. Photoshop is a tool for producing ideas and other nice stuff, like any software. The faster it is, the most people will like it, the better will sold. A simple truth. Think about what happened to Apple Finalcut ProX and how many users switched to Premiere. Photoshop has no competitors except new versions of itself.
And this does not apply only the CC users. Look at the bigger picture: how many users still using CS6 with all their fully working panels won't upgrade to CC if they know they'll reduce their productivity?
Think about the answer. Carefully. -
Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you.
== This happened ==
Every time Firefox opened
== Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.78 Safari/532.5Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
You can try if it works if you disable OOPP (Out-Of-Process-Plugins) for Flash
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page. -
Push notifications in flash based iphone apps
Will there be support for push notifications in flash based iphone apps???
And will be support to play music while in flash apps?Same here. On all 3 of my ios devices. Someone should really contact apple about this, and link this thread.
Same problem mentioned here:
https://discussions.apple.com/message/23392451?ac_cid=tw123456#23392451 -
Hide multiple rows in a dynamic table based on the row value.
Hi,
I need to hide multiple rows in a dynamic table based on the specific value of that row.
I cant find the right expression to do that.
please helpGo to the Row Properties, and in the Visibility tab, you have "Show or hide based on an expression". You can use this to write an expression that resolves to true if the row should be hidden, false otherwise.
Additionally, in the Matrix properties you should take a look at the filters section, perhaps you can achieve what you wish to achieve through there by removing the unnecessary rows instead of just hiding them.
It's only so much I can help you with the limited information. If you require further help, please provide us with more information such as what data are you displaying, what's the criteria to hiding rows, etc...
Regards
Andrew Borg Cardona -
Dynamic LOV based on Current user
How do i make a dynamic LOV based on the user id of the current user.
Also how to insert values from a form into a database
Can anyone please help me out.
ThanksUse portal.wwctx_api.get_user to get the currently logged in userid.
The simplest example of a form manipulating data is to create the form based on a table. All DML works automagically. You can base your form on a procedure with dummy columns and do your own DML if you wish. Lots more flexibility that way... -
Creating a dynamic lov based on a column
Hi,
I want to create a dynamic lov based on a column in a database-table.
Eg. the query
'select code, description from code_table'
is the contents of the column 'lov_query' in the table 'parameters'.
For every parameter there can be a different lov-query, but the result is always
two columns (code and description, number and name, etc.), exactly what you need to use in a lov.
I've written a (dbms_sql) function that takes the parameter-id and returns the lov_query.
create or replace function "GET_PMR_LOV"
(pmr_id in NUMBER)
return VARCHAR2
is
cur INTEGER := DBMS_SQL.OPEN_CURSOR;
fdbk INTEGER;
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(2000);
begin
DBMS_SQL.PARSE
(cur, 'select pmr.lov_query from parameters pmr where pmr.ID ' || ' = 'L_PMR_ID', DBMS_SQL.NATIVE);
DBMS_SQL.BIND_VARIABLE (cur, 'L_PMR_ID', l_pmr_id);
DBMS_SQL.DEFINE_COLUMN (cur, 1, l_stmnt, 2000);
fdbk := DBMS_SQL.EXECUTE (cur);
fdbk := DBMS_SQL.FETCH_ROWS (cur);
IF fdbk > 0
THEN
DBMS_SQL.COLUMN_VALUE (cur, 1, l_stmnt);
return (l_stmnt);
ELSE
return null;
END IF;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
But now I'm stuck on how to pass on this statement in HTMLDB
as an dynamic lov, I don't seem to be able to execute this statement
into the two display and return columns. Any ideas?Hello again,
This lov is on an updatable report-column where the user has to make a choice from an non-named, popup and query-based lov. In the lov-query box I have just put:
"return get_pmr_lov(:p41_param_id)" (without the quotes ;-)
Here's my latest version plus an alternative, which both seem to work fine:
create or replace function "GET_PMR_LOV"
(pmr_id in NUMBER)
return VARCHAR2
is
cur INTEGER := DBMS_SQL.OPEN_CURSOR;
fdbk INTEGER;
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(1000);
begin
DBMS_SQL.PARSE (cur, 'select pmr.lov_query from paramaters pmr where pmr.ID ' || '= :L_PMR_ID', DBMS_SQL.NATIVE);
DBMS_SQL.BIND_VARIABLE (cur, 'L_PMR_ID', l_pmr_id);
DBMS_SQL.DEFINE_COLUMN (cur, 1, l_stmnt, 1000);
fdbk := DBMS_SQL.EXECUTE (cur);
fdbk := DBMS_SQL.FETCH_ROWS (cur);
IF fdbk > 0 THEN
DBMS_SQL.COLUMN_VALUE (cur, 1, l_stmnt);
return (l_stmnt);
ELSE
return null;
END IF;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
create or replace function "GET_PMR_LOV2"
(pmr_id in NUMBER)
return VARCHAR2
is
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(1000);
BEGIN
EXECUTE IMMEDIATE 'select pmr.lov_query from parameters pmr where pmr.ID = :1'
INTO l_stmnt USING l_pmr_id;
return l_stmnt;
END;
The error-message remains the same, unable to bind :p41_param_id ! -
How can i create a dynamic structure based on my input from a select-option
Hello,
This is to develop a custom report in FI for G/L Balance based on company code.
I have an input select-option for Company code.
Based on the range of company code my output layout should be modified.
I am not very much sure to create a dynamic internal based on the input from a select-option.
Can any one please let me know how can i do this.
I would appreciate for anyone who turns up quickly.
Thank you,
With regs,
Anitha Joss.See the following program, it builds a dynamic internal table based on the company codes from the select option.
report zrich_0001 .
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
data: it001 type table of t001 with header line.
selection-screen begin of block b1 with frame title text-001.
select-options: s_bukrs for it001-bukrs.
selection-screen end of block b1.
start-of-selection.
select * into table it001 from t001
where bukrs in s_bukrs.
perform build_dyn_itab.
* Build_dyn_itab
form build_dyn_itab.
data: index(3) type c.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'PERIOD' .
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
loop at it001.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = it001-bukrs .
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 4.
append wa_it_fldcat to it_fldcat .
endloop.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
Regards,
Rich Heilman -
Browsers crashing presumably due to evil Flash-based content + updates?!
I haven't had a problem with flash-based content until a couple days ago, when I installed a bundle of software updates, including 10.5.7. Since then, I have tried to access flash based content, such as pandora internet radio, youtube videos, and the standard view of gmail. On Opera, Safari, and Firefox, (all in which flash-based content worked before) I was left with the spinning rainbow of grief!
I have disabled the plugins for Shockwave Flash, which allows me to get around but denies me the ability to view videos or listen to music, which frankly is pretty ridiculous. So I proceeded to find some other means for me to have access without the spinning wheel of horror!
So I uninstalled the Flash 10 that I had, and installed and older Flash version: MAC 9,0,47,0
Now, I enabled the Shockwave Flash plugin, and I am able to view videos on youtube and google video. However, I am not able to listen to music on Myspace (claims I need the newest version 10), Pandora, or Gmail in standard view. So...the spinning wheel strikes again.
I am completely frazzled, and have read countless articles, each leading me nowhere, but more frustrated with Apple and their products. I have come to the conclusion that the browser, nor the sites are the problem.
The problem originates either from Macromedia Flash, OR the Software Update bundle Apple insisted that I install. I have a suspicion it's the latter. I know other people have been having similar problems with their Macbooks.
I've also noticed that Expose and Spaces are having very sluggish response times.
I'm looking for a solution, if anyone has found one.
Here is a recent compilation of my Software Update log:
2009-06-06 00:41:30 -0700: Installed "iDVD Update" (7.0.3)
2009-06-06 00:41:59 -0700: Installed "iTunes" (8.1.1)
2009-06-25 20:35:08 -0700: Installed "Digital Camera Raw Compatibility Update" (2.6)
2009-06-25 20:35:25 -0700: Installed "AirPort Utility Software Update 2009-002" (5.4.2)
2009-06-25 20:36:14 -0700: Installed "iTunes" (8.2.0)
2009-06-25 20:36:19 -0700: Installed "iLife Support" (9.0.3)
2009-06-25 20:36:37 -0700: Installed "iDVD Update" (7.0.4)
2009-06-25 20:40:08 -0700: Installed "Mac OS X Update" (10.5.7)
2009-06-25 20:40:52 -0700: Installed "QuickTime" (7.6.2)
Here's an enormous list of console messages: [you'll find that there's a lot of "mozilla.firefox Debugger() was called!" As that thing has crashed a million times by now.]
6/24/09 1:29:39 PM com.apple.launchd[184] ([0x0-0xa40a4].com.apple.Safari[2742]) Exited: Terminated
6/24/09 1:30:24 PM [0x0-0x20d20d].com.operasoftware.Opera[19455] Unknown argument: -psn02150925
6/24/09 1:35:58 PM Spotlight[193] [QL ERROR] Generator database update takes too long... we will use what we currently have
6/24/09 1:36:45 PM quicklookd[29560] [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest <a class="jive-link-external-small" href="file://">file://localhost/Users/Saree/Web%20Design/Sowhatout%20copy%20for %20Perez/index.html>'
6/24/09 1:36:51 PM [0x0-0x10010].com.apple.finder[203] Wed Jun 24 13:36:51 new-host.home Finder[203] <Error>: CGImageCreate: invalid image size: 0 x 0.
6/24/09 1:43:48 PM com.apple.quicklook[29604] Wed Jun 24 13:43:48 new-host.home quicklookd[29604] <Error>: Corrupt JPEG data: premature end of data segment
6/24/09 1:43:48 PM com.apple.quicklook[29604]
6/24/09 1:44:44 PM com.apple.quicklook[29604] Wed Jun 24 13:44:44 new-host.home quicklookd[29604] <Error>: Corrupt JPEG data: premature end of data segment
6/24/09 1:44:44 PM com.apple.quicklook[29604]
6/24/09 1:54:40 PM quicklookd[29675] EXCEPTION CPMessageException: (null)
6/24/09 3:46:27 PM Spotlight[193] /SourceCache/Spotlight/Spotlight-398.25/menu/Application/../Models/MDQueryWorke r.m -[MDQueryWorker startQuery:withFlags:] Can't execute query '(* = "icha*"cdw || kMDItemTextContent = "icha*"cdw)'
6/24/09 5:21:03 PM com.apple.quicklook[30789] Wed Jun 24 17:21:03 new-host.home quicklookd[30789] <Error>: Corrupt JPEG data: premature end of data segment
6/24/09 5:21:03 PM com.apple.quicklook[30789]
6/24/09 5:21:03 PM com.apple.quicklook[30789] Wed Jun 24 17:21:03 new-host.home quicklookd[30789] <Error>: Corrupt JPEG data: premature end of data segment
6/24/09 5:21:03 PM com.apple.quicklook[30789]
6/24/09 5:32:42 PM com.apple.launchctl.System[2] fsck_hfs: Volume is journaled. No checking performed.
6/24/09 5:32:42 PM com.apple.launchctl.System[2] fsck_hfs: Use the -f option to force checking.
6/24/09 5:32:47 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
6/24/09 5:32:47 PM com.apple.launchd[1] (com.apple.blued) Unknown key for boolean: EnableTransactions
6/24/09 5:32:47 PM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
6/24/09 5:32:47 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
6/24/09 5:32:47 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
6/24/09 5:32:57 PM org.ntp.ntpd[28] Error : nodename nor servname provided, or not known
6/24/09 5:32:58 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 7 seconds
6/24/09 5:32:59 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 6 seconds
6/24/09 5:33:06 PM com.parallels.desktop.launchdaemon[52] No suitable device found for PVS0.
6/24/09 5:33:08 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
6/24/09 5:33:09 PM com.parallels.desktop.launchdaemon[52] Configuring en2...
6/24/09 5:33:09 PM com.parallels.desktop.launchdaemon[52] No System Preferences changes required.
6/24/09 5:33:09 PM com.parallels.desktop.launchdaemon[52] Configuring en3...
6/24/09 5:33:09 PM com.parallels.desktop.launchdaemon[52] No System Preferences changes required.
6/24/09 5:33:21 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[126]) Exited: Terminated
6/24/09 5:33:21 PM com.apple.launchd[157] (com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions
6/24/09 5:33:52 PM com.apple.SystemStarter[30] Loading VBoxDrv.kext
6/24/09 5:33:52 PM com.apple.SystemStarter[30] kextload: /Library/Extensions/VBoxDrv.kext loaded successfully
6/24/09 5:33:52 PM com.apple.SystemStarter[30] Loading VBoxUSB.kext
6/24/09 5:33:52 PM com.apple.SystemStarter[30] kextload: /Library/Extensions/VBoxUSB.kext loaded successfully
6/24/09 5:33:52 PM com.apple.SystemStarter[30] Loading VBoxNetFlt.kext
6/24/09 5:33:53 PM com.apple.SystemStarter[30] kextload: /Library/Extensions/VBoxNetFlt.kext loaded successfully
6/24/09 5:35:01 PM [0x0-0x17017].org.mozilla.firefox[296] Debugger() was called!
6/24/09 5:35:07 PM [0x0-0x17017].org.mozilla.firefox[296] Debugger() was called!
6/24/09 7:42:57 PM Preview[581] [<PVImageElementResizeRep 0x16158920> setNilValueForKey]: could not set nil as the value for the key heightInUnits.
6/24/09 9:25:05 PM com.apple.launchd[157] (0x10d500.Locum[1146]) Exited: Terminated
6/25/09 11:33:01 AM com.apple.launchd[1] (org.samba.smbd[316]) Stray process with PGID equal to this dead job: PID 2883 PPID 1 smbd
6/25/09 11:33:01 AM com.apple.launchd[1] (org.samba.smbd[316]) Stray process with PGID equal to this dead job: PID 317 PPID 1 smbd
6/25/09 11:33:07 AM com.apple.launchd[1] (org.samba.smbd[2885]) Stray process with PGID equal to this dead job: PID 2886 PPID 1 smbd
6/25/09 11:33:07 AM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 5 seconds
6/25/09 5:04:12 PM RealPlayer Downloader[301] WARNING! duplicate matches; bailing
6/25/09 5:42:32 PM com.apple.launchd[157] ([0x0-0x19019].com.realnetworks.realplayerdownloader[301]) Exited: Terminated
6/25/09 5:43:50 PM [0x0-0x17017].org.mozilla.firefox[296] firefox-bin(296,0xa0378720) malloc: * mmap(size=12025856) failed (error code=12)
6/25/09 5:43:50 PM [0x0-0x17017].org.mozilla.firefox[296] * error: can't allocate region
6/25/09 5:43:50 PM [0x0-0x17017].org.mozilla.firefox[296] * set a breakpoint in mallocerrorbreak to debug
6/25/09 5:43:50 PM [0x0-0x17017].org.mozilla.firefox[296] firefox-bin(296,0xa0378720) malloc: * mmap(size=12095488) failed (error code=12)
6/25/09 5:43:50 PM [0x0-0x17017].org.mozilla.firefox[296] * error: can't allocate region
6/25/09 5:43:50 PM [0x0-0x17017].org.mozilla.firefox[296] * set a breakpoint in mallocerrorbreak to debug
6/25/09 5:44:02 PM com.apple.launchd[157] ([0x0-0x17017].org.mozilla.firefox[296]) Stray process with PGID equal to this dead job: PID 4223 PPID 1 firefox-bin
6/25/09 5:44:02 PM com.apple.launchd[157] ([0x0-0x17017].org.mozilla.firefox[296]) Exited with exit code: 1
6/25/09 5:45:19 PM [0x0-0x17017].org.mozilla.firefox Debugger() was called!
6/25/09 5:47:14 PM com.apple.launchd[1] (org.samba.smbd[2909]) Stray process with PGID equal to this dead job: PID 2910 PPID 1 smbd
6/25/09 5:47:19 PM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 6 seconds
6/25/09 5:49:03 PM [0x0-0xcd0cd].com.operasoftware.Opera[4242] Debugger() was called!
6/25/09 5:55:10 PM [0x0-0xcd0cd].com.operasoftware.Opera[4242] Unknown argument: -psn0839885
6/25/09 5:55:50 PM [0x0-0xd20d2].org.mozilla.firefox[4319] Debugger() was called!
6/25/09 5:56:21 PM com.apple.launchd[157] ([0x0-0xd20d2].org.mozilla.firefox[4319]) Exited: Terminated
6/25/09 5:56:49 PM [0x0-0xd40d4].org.mozilla.firefox[4326] Debugger() was called!
6/25/09 5:56:57 PM [0x0-0xd40d4].org.mozilla.firefox[4326] Debugger() was called!
6/25/09 5:57:09 PM [0x0-0xd40d4].org.mozilla.firefox[4326] Debugger() was called!
6/25/09 5:57:34 PM com.apple.launchd[157] ([0x0-0xd40d4].org.mozilla.firefox[4326]) Exited: Terminated
6/25/09 5:58:09 PM [0x0-0xd90d9].org.mozilla.firefox[4346] Debugger() was called!
6/25/09 5:58:41 PM [0x0-0xda0da].com.apple.Safari[4348] Debugger() was called!
6/25/09 5:59:51 PM com.apple.launchd[157] ([0x0-0xd90d9].org.mozilla.firefox[4346]) Exited: Terminated
6/25/09 6:00:16 PM com.apple.launchd[157] ([0x0-0xda0da].com.apple.Safari[4348]) Exited: Terminated
6/25/09 6:00:58 PM [0x0-0xde0de].org.mozilla.firefox[4380] Debugger() was called!
6/25/09 6:01:37 PM [0x0-0xde0de].org.mozilla.firefox[4380] Debugger() was called!
6/25/09 6:01:52 PM [0x0-0xde0de].org.mozilla.firefox[4380] Debugger() was called!
6/25/09 6:02:02 PM [0x0-0xde0de].org.mozilla.firefox[4380] Debugger() was called!
6/25/09 6:09:58 PM loginwindow[35] Could not find image named 'NSApplication'.
6/25/09 6:09:58 PM com.apple.loginwindow[35] 2009-06-25 18:09:58.971 loginwindow[35:20b] Could not find image named 'NSApplication'.
6/25/09 6:09:58 PM loginwindow[35] Could not find image named 'hgfhfg'.
6/25/09 6:09:58 PM com.apple.loginwindow[35] 2009-06-25 18:09:58.973 loginwindow[35:20b] Could not find image named 'hgfhfg'.
6/25/09 6:10:41 PM com.apple.launchd[157] ([0x0-0xde0de].org.mozilla.firefox[4380]) Exited: Terminated
6/25/09 6:13:31 PM com.apple.launchd[157] ([0x0-0xb00b].com.apple.dock[174]) Stray process with PGID equal to this dead job: PID 3157 PPID 1 DashboardClient
6/25/09 6:13:33 PM com.apple.loginwindow[35] Shutdown NOW!
6/25/09 6:13:33 PM com.apple.loginwindow[35] System shutdown time has arrived
6/25/09 6:13:33 PM com.apple.launchd[1] (com.parallels.desktop.launchdaemon[52]) Stray process with PGID equal to this dead job: PID 152 PPID 1 prldispservice
6/25/09 6:13:33 PM com.apple.launchd[1] (com.parallels.desktop.launchdaemon[52]) Exited: Terminated
6/25/09 6:13:33 PM com.apple.SystemStarter[30] Unloading VBoxUSB.kext
6/25/09 6:13:33 PM com.apple.SystemStarter[30] kextunload: unload id org.virtualbox.kext.VBoxUSB succeeded (any personalities also unloaded)
6/25/09 6:13:33 PM com.apple.SystemStarter[30] Unloading VBoxNetFlt.kext
6/25/09 6:13:33 PM com.apple.SystemStarter[30] kextunload: unload id org.virtualbox.kext.VBoxNetFlt succeeded (any personalities also unloaded)
6/25/09 6:13:33 PM com.apple.SystemStarter[30] Unloading VBoxDrv.kext
6/25/09 6:13:33 PM com.apple.SystemStarter[30] kextunload: unload id org.virtualbox.kext.VBoxDrv succeeded (any personalities also unloaded)
6/25/09 6:14:31 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
6/25/09 6:14:31 PM com.apple.launchd[1] (com.apple.blued) Unknown key for boolean: EnableTransactions
6/25/09 6:14:31 PM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
6/25/09 6:14:31 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
6/25/09 6:14:31 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
6/25/09 6:14:41 PM org.ntp.ntpd[27] Error : nodename nor servname provided, or not known
6/25/09 6:14:43 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 9 seconds
6/25/09 6:14:43 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 8 seconds
6/25/09 6:14:47 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
6/25/09 6:14:48 PM com.apple.SystemStarter[29] Loading VBoxDrv.kext
6/25/09 6:14:48 PM com.parallels.desktop.launchdaemon[51] Configuring en2...
6/25/09 6:14:48 PM com.parallels.desktop.launchdaemon[51] No System Preferences changes required.
6/25/09 6:14:48 PM com.parallels.desktop.launchdaemon[51] Configuring en3...
6/25/09 6:14:48 PM com.parallels.desktop.launchdaemon[51] No System Preferences changes required.
6/25/09 6:14:49 PM com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxDrv.kext loaded successfully
6/25/09 6:14:49 PM com.apple.SystemStarter[29] Loading VBoxUSB.kext
6/25/09 6:14:50 PM com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxUSB.kext loaded successfully
6/25/09 6:14:50 PM com.apple.SystemStarter[29] Loading VBoxNetFlt.kext
6/25/09 6:14:50 PM com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxNetFlt.kext loaded successfully
6/25/09 6:14:58 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 4 seconds
6/25/09 6:14:58 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[146]) Exited: Terminated
6/25/09 6:14:58 PM com.apple.launchd[166] (com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions
6/25/09 6:15:01 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 1 seconds
6/25/09 6:15:01 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 1 seconds
6/25/09 6:17:26 PM [0x0-0x16016].org.mozilla.firefox[210] Debugger() was called!
6/25/09 6:32:54 PM [0x0-0x16016].org.mozilla.firefox[210] Debugger() was called!
6/25/09 6:32:58 PM [0x0-0x16016].org.mozilla.firefox[210] Debugger() was called!
6/25/09 6:36:21 PM [0x0-0x16016].org.mozilla.firefox[210] Debugger() was called!
6/25/09 6:36:57 PM [0x0-0x16016].org.mozilla.firefox[210] Debugger() was called!
6/25/09 7:30:37 PM com.apple.launchd[166] ([0x0-0x16016].org.mozilla.firefox[210]) Exited: Terminated
6/25/09 7:31:08 PM [0x0-0x27027].org.mozilla.firefox[321] Debugger() was called!
6/25/09 7:31:26 PM [0x0-0x27027].org.mozilla.firefox[321] Debugger() was called!
6/25/09 7:32:09 PM [0x0-0x27027].org.mozilla.firefox[321] Debugger() was called!
6/25/09 7:33:09 PM [0x0-0x27027].org.mozilla.firefox[321] Debugger() was called!
6/25/09 7:33:18 PM [0x0-0x27027].org.mozilla.firefox[321] Debugger() was called!
6/25/09 7:36:01 PM [0x0-0x27027].org.mozilla.firefox[321] Debugger() was called!
6/25/09 7:36:07 PM [0x0-0x27027].org.mozilla.firefox[321] Debugger() was called!
6/25/09 7:53:16 PM [0x0-0x27027].org.mozilla.firefox[321] ### MRJPlugin: getPluginBundle() here. ###
6/25/09 7:53:16 PM [0x0-0x27027].org.mozilla.firefox[321] ### MRJPlugin: CFBundleGetBundleWithIdentifier() succeeded. ###
6/25/09 7:53:16 PM [0x0-0x27027].org.mozilla.firefox[321] ### MRJPlugin: CFURLGetFSRef() succeeded. ###
6/25/09 7:53:20 PM [0x0-0x27027].org.mozilla.firefox[321] Thu Jun 25 19:53:20 PDT 2009 JEP creating applet JavaDetector (http://lads.myspace.com/java/)
6/25/09 7:53:24 PM [0x0-0x27027].org.mozilla.firefox[321] Thu Jun 25 19:53:24 PDT 2009 JEP creating applet com.myspace.uploader2.Uploader2 (http://viewmorepics.myspace.com/)
6/25/09 8:15:22 PM com.apple.launchd[166] ([0x0-0x27027].org.mozilla.firefox[321]) Exited: Killed
6/25/09 8:19:49 PM [0x0-0x3e03e].org.mozilla.firefox[516] Debugger() was called!
6/25/09 8:22:48 PM [0x0-0x3e03e].org.mozilla.firefox[516] firefox-bin(516,0xa0378720) malloc: * mmap(size=15454208) failed (error code=12)
6/25/09 8:22:48 PM [0x0-0x3e03e].org.mozilla.firefox[516] * error: can't allocate region
6/25/09 8:22:48 PM [0x0-0x3e03e].org.mozilla.firefox[516] * set a breakpoint in mallocerrorbreak to debug
6/25/09 8:22:48 PM [0x0-0x3e03e].org.mozilla.firefox[516] firefox-bin(516,0xa0378720) malloc: * mmap(size=15540224) failed (error code=12)
6/25/09 8:22:48 PM [0x0-0x3e03e].org.mozilla.firefox[516] * error: can't allocate region
6/25/09 8:22:48 PM [0x0-0x3e03e].org.mozilla.firefox[516] * set a breakpoint in mallocerrorbreak to debug
6/25/09 8:22:50 PM [0x0-0x3e03e].org.mozilla.firefox[516] firefox-bin(516,0xb08cf000) malloc: * mmap(size=15454208) failed (error code=12)
6/25/09 8:22:50 PM [0x0-0x3e03e].org.mozilla.firefox[516] * error: can't allocate region
6/25/09 8:22:50 PM [0x0-0x3e03e].org.mozilla.firefox[516] * set a breakpoint in mallocerrorbreak to debug
6/25/09 8:23:53 PM com.apple.launchd[166] ([0x0-0x3e03e].org.mozilla.firefox[516]) Stray process with PGID equal to this dead job: PID 539 PPID 1 crashreporter
6/25/09 8:23:53 PM com.apple.launchd[166] ([0x0-0x3e03e].org.mozilla.firefox[516]) Exited with exit code: 1
6/25/09 8:24:51 PM [0x0-0x3e03e].org.mozilla.firefox Debugger() was called!
6/25/09 8:25:12 PM [0x0-0x3e03e].org.mozilla.firefox Debugger() was called!
6/25/09 8:25:40 PM [0x0-0x45045].com.operasoftware.Opera[545] Debugger() was called!
6/25/09 8:29:56 PM com.apple.launchd[166] ([0x0-0x45045].com.operasoftware.Opera[545]) Exited: Terminated
6/25/09 8:30:16 PM [0x0-0x46046].com.apple.Safari[553] Debugger() was called!
6/25/09 8:31:01 PM com.apple.launchd[1] (com.apple.spindump[562]) Exited abnormally: Segmentation fault
6/25/09 8:33:24 PM Software Update[587] arguments=(null)
6/25/09 8:34:19 PM com.apple.launchd[166] ([0x0-0x46046].com.apple.Safari[553]) Exited: Terminated
6/25/09 8:34:58 PM com.apple.launchd[166] ([0x0-0x4b04b].com.apple.AppleSpell[572]) Exited: Terminated
6/25/09 8:34:58 PM com.apple.launchd[166] (com.apple.pboard[181]) Exited: Terminated
6/25/09 8:34:58 PM com.apple.launchd[166] (com.apple.UserEventAgent-Aqua[177]) Exited: Terminated
6/25/09 8:36:01 PM com.apple.launchd[1] (com.apple.usbmuxd) Unknown key for boolean: EnableTransactions
6/25/09 8:40:05 PM com.apple.launchd[1] (0x10aab0.mdworker[1893]) Exited abnormally: Abort trap
6/25/09 8:40:05 PM com.apple.launchd[1] (0x10aab0.mdworker) Failed to check-in!
6/25/09 8:40:09 PM com.apple.launchd[1] (com.apple.ReportCrash[1894]) Exited: Terminated
6/25/09 8:40:16 PM com.apple.dyld[1892] updatedyld_sharedcache[1892] current cache invalid because /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit has changed
6/25/09 8:40:24 PM com.apple.dyld[1892] updatedyld_sharedcache[1892] for arch=i386 failed: aborting because OS dylib modified during cache creation: /System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CoreMediaIOServicesPrivate
6/25/09 8:40:25 PM com.apple.dyld[1892] updatedyld_sharedcache[1892] for arch=i386 failed: aborting because OS dylib modified during cache creation: /System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CoreAUC
6/25/09 8:40:28 PM com.apple.dyld[1892] updatedyld_sharedcache[1892] for arch=i386 failed: aborting because OS dylib modified during cache creation: /System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CoreMediaIOServicesPrivate
6/25/09 8:40:28 PM com.apple.dyld[1892] updatedyld_sharedcache[1892] for arch=i386 failed: aborting because OS dylib modified during cache creation: /System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CoreMed iaPrivate
6/25/09 8:40:30 PM com.apple.dyld[1892] updatedyld_sharedcache[1892] for arch=i386 failed: aborting because OS dylib modified during cache creation: /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
6/25/09 8:40:31 PM com.apple.dyld[1892] updatedyld_sharedcache[1892] for arch=i386 failed: aborting because OS dylib modified during cache creation: /System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CoreMediaIOServicesPrivate
6/25/09 8:40:55 PM com.apple.launchd[1] (com.parallels.desktop.launchdaemon[51]) Stray process with PGID equal to this dead job: PID 157 PPID 1 prldispservice
6/25/09 8:40:55 PM com.apple.launchd[1] (com.parallels.desktop.launchdaemon[51]) Exited: Terminated
6/25/09 8:40:55 PM com.apple.loginwindow[615] Thu Jun 25 20:40:55 new-host.home ManagedClient[621] <Warning>: CGSShutdownServerConnections: Detaching application from window server
6/25/09 8:40:55 PM com.apple.loginwindow[615] Thu Jun 25 20:40:55 new-host.home ManagedClient[621] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
6/25/09 8:40:55 PM com.apple.SystemStarter[29] Unloading VBoxUSB.kext
6/25/09 8:40:55 PM com.apple.SystemStarter[29] kextunload: unload id org.virtualbox.kext.VBoxUSB succeeded (any personalities also unloaded)
6/25/09 8:40:55 PM com.apple.SystemStarter[29] Unloading VBoxNetFlt.kext
6/25/09 8:40:55 PM com.apple.SystemStarter[29] kextunload: unload id org.virtualbox.kext.VBoxNetFlt succeeded (any personalities also unloaded)
6/25/09 8:40:55 PM com.apple.SystemStarter[29] Unloading VBoxDrv.kext
6/25/09 8:42:45 PM com.apple.launchctl.System[2] BootCacheControl: could not open /var/db/BootCache.playlist:
6/25/09 8:42:45 PM com.apple.launchctl.System[2] No such file or directory
6/25/09 8:42:45 PM com.apple.launchctl.System[2] BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
6/25/09 8:42:46 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
6/25/09 8:42:46 PM com.apple.launchd[1] (com.apple.blued) Unknown key for boolean: EnableTransactions
6/25/09 8:42:46 PM com.apple.launchd[1] (com.apple.usbmuxd) Unknown key for boolean: EnableTransactions
6/25/09 8:42:46 PM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
6/25/09 8:42:46 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
6/25/09 8:42:46 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
6/25/09 8:42:46 PM com.apple.launchd[1] (org.x.privileged_startx) Unknown key for boolean: EnableTransactions
6/25/09 8:43:04 PM com.apple.su.startup[36] Checking for securityd
6/25/09 8:43:05 PM com.apple.su.startup[36] Running authsys_printadmin tool
6/25/09 8:43:06 PM org.ntp.ntpd[29] Error : nodename nor servname provided, or not known
6/25/09 8:43:06 PM com.apple.su.startup[36] Cleaning up startup script resources
6/25/09 8:43:29 PM com.parallels.desktop.launchdaemon[56] No suitable device found for PVS1.
6/25/09 8:43:29 PM com.apple.SystemStarter[34] Loading VBoxDrv.kext
6/25/09 8:43:30 PM com.apple.SystemStarter[34] kextload: /Library/Extensions/VBoxDrv.kext loaded successfully
6/25/09 8:43:30 PM com.apple.SystemStarter[34] Loading VBoxUSB.kext
6/25/09 8:43:30 PM com.apple.SystemStarter[34] kextload: /Library/Extensions/VBoxUSB.kext loaded successfully
6/25/09 8:43:30 PM com.apple.SystemStarter[34] Loading VBoxNetFlt.kext
6/25/09 8:43:30 PM com.apple.SystemStarter[34] kextload: /Library/Extensions/VBoxNetFlt.kext loaded successfully
6/25/09 8:43:31 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
6/25/09 8:43:32 PM com.parallels.desktop.launchdaemon[56] Configuring en2...
6/25/09 8:43:32 PM com.parallels.desktop.launchdaemon[56] No System Preferences changes required.
6/25/09 8:43:32 PM com.parallels.desktop.launchdaemon[56] Configuring en3...
6/25/09 8:43:32 PM com.parallels.desktop.launchdaemon[56] No System Preferences changes required.
6/25/09 8:47:33 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[191]) Exited: Terminated
6/25/09 8:47:33 PM com.apple.launchd[336] (com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions
6/25/09 8:47:33 PM com.apple.launchd[336] (org.x.startx) Unknown key for boolean: EnableTransactions
6/25/09 8:47:38 PM Dock[351] _DESCRegisterDockExtraClient failed 268435459
6/25/09 9:01:59 PM [0x0-0x16016].org.mozilla.firefox[370] Debugger() was called!
6/25/09 9:02:13 PM [0x0-0x16016].org.mozilla.firefox[370] Debugger() was called!
6/25/09 9:07:33 PM [0x0-0x16016].org.mozilla.firefox[370] firefox-bin(370,0xa048c720) malloc: * mmap(size=15220736) failed (error code=12)
6/25/09 9:07:33 PM [0x0-0x16016].org.mozilla.firefox[370] * error: can't allocate region
6/25/09 9:07:33 PM [0x0-0x16016].org.mozilla.firefox[370] * set a breakpoint in mallocerrorbreak to debug
6/25/09 9:07:33 PM [0x0-0x16016].org.mozilla.firefox[370] firefox-bin(370,0xa048c720) malloc: * mmap(size=15310848) failed (error code=12)
6/25/09 9:07:33 PM [0x0-0x16016].org.mozilla.firefox[370] * error: can't allocate region
6/25/09 9:07:33 PM [0x0-0x16016].org.mozilla.firefox[370] * set a breakpoint in mallocerrorbreak to debug
6/25/09 9:07:36 PM com.apple.launchd[336] ([0x0-0x16016].org.mozilla.firefox[370]) Stray process with PGID equal to this dead job: PID 403 PPID 1 crashreporter
6/25/09 9:07:36 PM com.apple.launchd[336] ([0x0-0x16016].org.mozilla.firefox[370]) Exited with exit code: 1
6/25/09 9:08:41 PM [0x0-0x16016].org.mozilla.firefox Debugger() was called!
6/25/09 9:08:51 PM [0x0-0x16016].org.mozilla.firefox Debugger() was called!
6/25/09 9:09:43 PM [0x0-0x21021].org.mozilla.firefox[421] Debugger() was called!
6/25/09 9:09:53 PM [0x0-0x21021].org.mozilla.firefox[421] ### MRJPlugin: getPluginBundle() here. ###
6/25/09 9:09:54 PM [0x0-0x21021].org.mozilla.firefox[421] ### MRJPlugin: CFBundleGetBundleWithIdentifier() succeeded. ###
6/25/09 9:09:54 PM [0x0-0x21021].org.mozilla.firefox[421] ### MRJPlugin: CFURLGetFSRef() succeeded. ###
6/25/09 9:09:59 PM [0x0-0x21021].org.mozilla.firefox[421] Thu Jun 25 21:09:59 PDT 2009 JEP creating applet JavaDetector (http://lads.myspace.com/java/)
6/25/09 9:10:03 PM [0x0-0x21021].org.mozilla.firefox[421] Thu Jun 25 21:10:03 PDT 2009 JEP creating applet com.myspace.uploader2.Uploader2 (http://viewmorepics.myspace.com/)
6/25/09 9:10:05 PM [0x0-0x21021].org.mozilla.firefox[421] Debugger() was called!
6/25/09 9:10:27 PM [0x0-0x21021].org.mozilla.firefox[421] Debugger() was called!
6/25/09 9:10:41 PM [0x0-0x21021].org.mozilla.firefox[421] Debugger() was called!
6/25/09 9:10:59 PM [0x0-0x21021].org.mozilla.firefox[421] Debugger() was called!
6/25/09 9:11:26 PM [0x0-0x22022].com.operasoftware.Opera[424] Debugger() was called!
6/25/09 9:12:18 PM com.apple.launchd[336] ([0x0-0x22022].com.operasoftware.Opera[424]) Exited: Terminated
6/25/09 9:12:40 PM com.apple.launchd[336] ([0x0-0x21021].org.mozilla.firefox[421]) Exited: Killed
6/25/09 9:13:06 PM [0x0-0x26026].com.apple.Safari[449] Debugger() was called!
6/25/09 9:15:35 PM [0x0-0x2b02b].com.operasoftware.Opera[463] Debugger() was called!
6/25/09 9:21:05 PM [0x0-0x2c02c].org.mozilla.firefox[471] Debugger() was called!
6/25/09 9:38:04 PM com.apple.launchd[336] ([0x0-0x2c02c].org.mozilla.firefox[471]) Exited: Terminated
6/25/09 9:38:22 PM com.apple.launchd[336] ([0x0-0x2b02b].com.operasoftware.Opera[463]) Exited: Terminated
6/25/09 9:38:35 PM com.apple.launchd[336] ([0x0-0x26026].com.apple.Safari[449]) Exited: Terminated
6/25/09 9:46:38 PM [0x0-0x39039].org.mozilla.firefox[557] Debugger() was called!
6/25/09 9:46:55 PM com.apple.launchd[336] ([0x0-0x39039].org.mozilla.firefox[557]) Exited: Terminated
6/25/09 9:55:44 PM [0x0-0x3e03e].org.mozilla.firefox[574] Debugger() was called!
6/25/09 9:57:33 PM [0x0-0x3e03e].org.mozilla.firefox[574] Debugger() was called!
6/25/09 9:59:04 PM [0x0-0x3e03e].org.mozilla.firefox[574] Debugger() was called!
6/25/09 9:59:26 PM [0x0-0x3e03e].org.mozilla.firefox[574] Debugger() was called!
6/26/09 11:21:26 AM Installer[959] <ZeroSliderSplitView: 0x883ed0>: the delegate <TargetSelectPage: 0x899a00> was sent -splitView:resizeSubviewsWithOldSize: and left the subview frames in an inconsistent state:
6/26/09 11:21:26 AM Installer[959] Split view bounds: {{0, 0}, {402, 104}}
6/26/09 11:21:26 AM Installer[959] Subview frame: {{0, 0}, {0, 32}}
6/26/09 11:21:26 AM Installer[959] Subview frame: {{0, 0}, {402, 104}}
6/26/09 11:21:26 AM Installer[959] The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)
6/26/09 11:23:00 AM [0x0-0x66066].org.mozilla.firefox[1220] Debugger() was called!
6/26/09 11:23:07 AM [0x0-0x66066].org.mozilla.firefox[1220] Debugger() was called!
6/26/09 11:29:21 AM com.apple.launchd[336] ([0x0-0x66066].org.mozilla.firefox[1220]) Exited: Terminated
6/26/09 11:30:01 AM [0x0-0x6d06d].org.mozilla.firefox[1245] Debugger() was called!
6/26/09 11:30:35 AM com.apple.launchd[336] ([0x0-0x6d06d].org.mozilla.firefox[1245]) Exited: Terminated
6/26/09 11:31:16 AM [0x0-0x70070].org.mozilla.firefox[1258] Debugger() was called!
6/26/09 11:35:40 AM [0x0-0x70070].org.mozilla.firefox[1258] Debugger() was called!
6/26/09 11:36:06 AM com.apple.launchd[336] ([0x0-0x70070].org.mozilla.firefox[1258]) Exited: Terminated
6/26/09 11:40:23 AM [0x0-0x73073].com.apple.Safari[1277] Debugger() was called!
6/26/09 11:42:16 AM com.apple.launchd[336] ([0x0-0x73073].com.apple.Safari[1277]) Exited: Terminated
6/26/09 11:43:34 AM [0x0-0x76076].org.mozilla.firefox[1295] Debugger() was called!
6/26/09 11:50:06 AM RealPlayer Downloader[1296] * NSTimer ignoring exception '* -[NSURL initWithString:relativeToURL:]: nil string parameter' that raised during firing of timer with target 0x1375d0 and selector 'shellScriptReaderTimer:'
6/26/09 3:12:54 PM [0x0-0x76076].org.mozilla.firefox[1295] Debugger() was called!
6/26/09 3:16:49 PM [0x0-0x76076].org.mozilla.firefox[1295] Debugger() was called!
6/26/09 3:19:32 PM [0x0-0x76076].org.mozilla.firefox[1295] Debugger() was called!
6/26/09 3:22:07 PM com.apple.launchd[336] ([0x0-0x76076].org.mozilla.firefox[1295]) Exited: Terminated
6/26/09 3:27:48 PM [0x0-0x82082].org.mozilla.firefox[1468] Debugger() was called!
6/26/09 3:31:37 PM [0x0-0x78078].com.apple.Safari[1306] Debugger() was called!
6/26/09 3:32:19 PM com.apple.launchd[336] ([0x0-0x82082].org.mozilla.firefox[1468]) Exited: Terminated
6/26/09 4:13:28 PM Finder[354] unlockFocus called too many time.
6/26/09 4:21:32 PM com.apple.launchd[336] ([0x0-0xa20a2].org.mozilla.firefox[1727]) Exited: Terminated
6/26/09 6:01:26 PM com.apple.launchd[1] (com.apple.syslogd[13]) Exited abnormally: Segmentation fault
6/26/09 6:01:28 PM com.apple.launchd[1] (org.samba.smbd[375]) Stray process with PGID equal to this dead job: PID 376 PPID 1 smbd
6/26/09 6:01:35 PM com.apple.launchd[1] (com.apple.smb.server.preferences) Throttling respawn: Will start in 1 seconds
6/26/09 6:01:36 PM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 1 seconds
6/26/09 6:09:07 PM com.apple.launchd[336] ([0x0-0xa50a5].org.mozilla.firefox[1736]) Exited: Terminated
6/26/09 6:09:10 PM RealPlayer Downloader[1296] * NSTimer ignoring exception '* -[NSURL initWithString:relativeToURL:]: nil string parameter' that raised during firing of timer with target 0x1375d0 and selector 'shellScriptReaderTimer:'
6/26/09 6:11:15 PM com.apple.launchd[336] ([0x0-0xa90a9].com.operasoftware.Opera[1790]) Exited: Terminated
6/26/09 6:28:57 PM com.apple.launchd[336] ([0x0-0xad0ad].org.mozilla.firefox[1804]) Exited: Terminated
6/26/09 6:41:07 PM iCalExternalSync[1858] [ICalExternalSync ]An iCal sync is already running. Another sync will be fired after this one to pick up the new changes.
6/26/09 6:41:07 PM [0x0-0x13013].com.apple.iCal[362] 2009-06-26 18:41:07.420 iCalExternalSync[1858:10b] [ICalExternalSync ]An iCal sync is already running. Another sync will be fired after this one to pick up the new changes.
6/26/09 6:42:41 PM Software Update[1867] arguments=(null)
6/26/09 7:20:40 PM com.apple.launchd[336] ([0x0-0xb10b1].com.operasoftware.Opera[1839]) Exited: Terminated
6/26/09 9:00:23 PM com.apple.launchd[336] ([0x0-0xbf0bf].org.mozilla.firefox[1941]) Exited: Terminated
6/26/09 9:00:23 PM com.apple.launchd[336] ([0x0-0xbf0bf].org.mozilla.firefox[1941]) Exited: TerminatedI'm experiencing the exact same thing. I think the problem here is the 'Debugger() was called!' line in the console. For some inexplicable reason, the production release of the Flash 10 plugin has a debugger call left in it, and so Flash throws to the debugger. The call doesn't seem to be ignored, but the browser just blocks waiting for the return of a debugger that isn't there.
I'm not sure how Adobe managed to leave this debugger call in the production release of the plugin, nor why the browsers are attempting to throw to the debugger in binaries that are not being run under debugging. I would assume the debugger calls would just be ignored when the app is not being debugged. I'm a developer and I have Xcode installed on my machine, so maybe that has something to do with it.
So, I don't have a solution. I do remember having this problem before a while ago, for the exact same reason, and at some point it went away. (Presumably when Adobe released a new version of the plugin that removed the debugger call.)
By the way, I really wish posts on this site that make any reference whatsoever to repairing permissions would be filtered out. You have to wade through a 10:1 ratio of posts for absolutely any problem on this site that excoriate people for not repairing permissions before posting, versus posts with actual useful advice. If they guy above had just read the original post he may have seen what's going on. Instead he just ran a pattern match for 'repair permissions' against the post, didn't see a match, and pasted in his useless boilerplate about repairing permissions.
http://daringfireball.net/2006/04/repair_permissions
Message was edited by: codyrobbins -
Questions: Late Model and Flash based iPod utilities
In the past I found it somewhat cumbersome to have to fully Restore iPods in order to repair their function.
So in order to keep my 3rd Gen. iPods in good shape I routinely needed to run
third-party disk repair utilities which have kept the iPods in fine running shape.
I notice that not much is available anymore in the way of an iPod utility, and for the Flash-Memory based iPods there seems to be none available.
Do the later model iPods no longer need maintenance?
Is there a utility that can repair and maintain a Flash Memory based drive
with out having to resort to erasing and restoring?
(i.e. do flash based drives never get directory errors?)
Thanks in advance for any referralsBelated thanks for the reply
I have been a bit ill, and not computing, lately.
It is my understanding that Restore function erases the iPod.
I find it more desireable to repair the 'pods without having
to lose all files.
Also, it seems to me that running a repair routine is a rather short time frame
(i.e. the time, only, that it takes to rebuild or repair the directory)
This seems not to be significantly more time that it would take to load
a couple-of-dozen songs.
Thanks again and sorry for the delay -
How to watch flash based videos without adobe flash installed using Safari
How do I watch flash based videos without adobe flash installed using Safari?
Once you have Chrome installed, activate the Develop menu in Safari (go to Safari Preferences > Advanced > Show Develop Menu). You then will see under the Develop menu the Open Page With option and Chrome will be listed there.
So each time you open a page with Safari requiring Flash, you use that menu option to open the same page in Chrome. -
How to create dynamic context based on a structure defined in the program?
Hi Experts,
I need to create a dynamic context based on a structure wa_struc which i have define programatically.
When I pass wa_struc to structure_name parameter of create_nodeinfo_from_struc, i get a runtime error:
"Parameter STRUCTURE_NAME contains an invalid value wa_struc."
How to create dynamic context based on a structure defined in the program?
I have written the code like this:
TYPES: BEGIN OF t_type,
v_carrid TYPE sflight-carrid,
v_connid TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
wa_struc type t_type.
data: dyn_node type ref to if_wd_context_node.
data: rootnode_info type ref to if_wd_context_node_info.
rootnode_info = wd_context->get_node_info( ).
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
parent_info = rootnode_info
node_name = 'dynflight'
structure_name = 'wa_struc'
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( name = 'dynflight' ).
dyn_node->bind_table( i_struc ).
Thanks
Gopal
Message was edited by: gopalkrishna baligaHi Michelle,
First of all Special thanks for your informative answers to my other forum questions. I really appreciate your help.
Coming back to this question I am still waiting for an answer. Please help. Note that my structure is not in a dictionary.
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
I have updated my code like the following and I am getting error:
TYPES: BEGIN OF t_type,
CARRID TYPE sflight-carrid,
CONNID TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
dyn_node type ref to if_wd_context_node,
rootnode_info type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
wa_node_att-name = 'CARRID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
insert wa_node_att into table i_node_att.
wa_node_att-name = 'CONNID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
attributes = i_node_att
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
But now I am getting the following error :
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
-Gopal
Message was edited by: gopalkrishna baliga -
Dynamic Rule based implementation in PL/SQL
Hi,
We are trying to implement a dynamic rule based application in Oracle 9i. Its simple logic where we store expressions as case statments and actions seperated by commas as follows.
Rule: 'Age > 18 and Age <65'
True Action: 'Status = ''Valid'' , description = ''age in range'''
False Action: 'Status =''Invalid'', Description=''Age not in range'''
Where Age,Status, description are all part of one table.
One way of implementing this is fire rule for each record in the table and then based on true or false call action as update.
i.e
select (case when 'Age > 18 and Age <65' then 1 else 0 end) age_rule from tableX
(above query will in in a cursor xcur)
Then we search for
if age_rule = 1 then
update tablex set Status = ''Valid'' , description = ''age in range'' where id=xcur.id;
else
update tablex set Status =''Invalid'', Description=''Age not in range'' where id=xcur.id;
end if;
This method will result in very slow performance due to high i/o. We want to implement this in collection based method.
Any ideas on how to dynamically check rules and apply actions to collection without impact on performance. (we have nearly 3million rows and 80 rules to be applied)
Thanks in advanceReturning to your original question, first of all, there is a small flaw in the requirements, because if you apply all the rules to the same table/cols, than the table will have results of only last rule that was processed.
Suppose rule#1:
Rule: 'Age > 18 and Age <65'
True Action: 'Status = ''Valid'' , description = ''age in range'''
False Action: 'Status =''Invalid'', Description=''Age not in range'''
and Rule#2:
Rule: 'Name like ''A%'''
True Action: 'Status = 'Invalid'' , description = ''name begins with A'''
False Action: 'Status =''Invalid'', Description=''name not begins with A'''
Then after applying of rule#1 and rule#2, results of the rule#1 will be lost, because second rule will modify the results of the first rule.
Regarding to using collections instead of row by row processing, I think that a better approach would be to move that evaluating cursor inside an update statement, in my tests this considerably reduced processed block count and response time.
Regarding to the expression filter, even so, that you are not going to move to 10g, you still can test this feature and see how it is implemented, to get some ideas of how to better implement your solution. There is a nice paper http://www-db.cs.wisc.edu/cidr2003/program/p27.pdf that describes expression filter implementation.
Here is my example of two different methods for expression evaluation that I've benchmarked, first is similar to your original example and second is with expression evaluation moved inside an update clause.
-- fist create two tables rules and data.
drop table rules;
drop table data;
create table rules( id number not null primary key, rule varchar(255), true_action varchar(255), false_action varchar(255) );
create table data( id integer not null primary key, name varchar(255), age number, status varchar(255), description varchar(255) );
-- populate this tables with information.
insert into rules
select rownum id
, 'Age > '||least(a,b)||' and Age < '||greatest(a,b) rule
, 'Status = ''Valid'', description = ''Age in Range''' true_action
, 'Status = ''Invalid'', description = ''Age not in Range''' false_action
from (
select mod(abs(dbms_random.random),60)+10 a, mod(abs(dbms_random.random),60)+10 b
from all_objects
where rownum <= 2
insert into data
select rownum, object_name, mod(abs(dbms_random.random),60)+10 age, null, null
from all_objects
commit;
-- this is method #1, evaluate rule against every record in the data and do the action
declare
eval number;
id number;
data_cursor sys_refcursor;
begin
execute immediate 'alter session set cursor_sharing=force';
for rules in ( select * from rules ) loop
open data_cursor for 'select case when '||rules.rule||' then 1 else 0 end eval, id from data';
loop
fetch data_cursor into eval, id;
exit when data_cursor%notfound;
if eval = 1 then
execute immediate 'update data set '||rules.true_action|| ' where id = :id' using id;
else
execute immediate 'update data set '||rules.false_action|| ' where id = :id' using id;
end if;
end loop;
end loop;
end;
-- this is method #2, evaluate rule against every record in the data and do the action in update, not in select
begin
execute immediate 'alter session set cursor_sharing=force';
for rules in ( select * from rules ) loop
execute immediate 'update data set '||rules.true_action|| ' where id in (
select id
from (
select case when '||rules.rule||' then 1 else 0 end eval, id
from data
where eval = 1 )';
execute immediate 'update data set '||rules.false_action|| ' where id in (
select id
from (
select case when '||rules.rule||' then 1 else 0 end eval, id
from data
where eval = 0 )';
end loop;
end;
Here are SQL_TRACE results for method#1:
call count cpu elapsed disk query current rows
Parse 37 0.01 0.04 0 0 0 0
Execute 78862 16.60 17.50 0 187512 230896 78810
Fetch 78884 3.84 3.94 2 82887 1 78913
total 157783 20.46 21.49 2 270399 230897 157723
and this is results for method#2:
call count cpu elapsed disk query current rows
Parse 6 0.00 0.00 0 0 0 0
Execute 6 1.93 12.77 0 3488 170204 78806
Fetch 1 0.00 0.00 0 7 0 2
total 13 1.93 12.77 0 3495 170204 78808
You can compare this two methods using SQL_TRACE. -
A dynamic table based on run-time created view object -- please help!
Hello!
I'm trying to create a dynamic table based on an run-time created view object. All go ok, but table binding component take the first view/iterator state and don't reflect changes they have. Please, take a look:
1. At run-time the view is being replaced by new red-only one based on query in application module:
getQueryView().remove();
createViewObjectFromQueryStmt("QueryView", statement);
2. Page definition file contains an iterator (using iterator or methodIterator - doesn't matter) binding and table, which binds to the iterator, like:
<methodIterator id="distributeQuery1Iter" Binds="distributeQuery1.result"
DataControl="QueryServiceDataControl" RangeSize="10"/>
<table id="distributeQuery11" IterBinding="distributeQuery1Iter"/>
3. The page code uses <af:table>. But, if I use table binding (it's right) like this:
<af:table var="row" value="#{bindings.distributeQuery11.collectionModel}">
<af:forEach items="#{bindings.distributeQuery11.attributeDefs}" var="def">
the table will never changed (i.e. still show the first view instance).
When I tried to use iterator binding directly (it's bad and cannot provide all needed features unlike CollectionModel from table binding) I saw that table works!
(Code is somehing like:
<af:table var="row" value="#{bindings.myIterator.allRowsInRange}">
<af:forEach items="#{bindings.myIterator.attributeDefs}" var="def">
Why the table binding do not reflect changes in iterator? Or should I use different approach?
Thanks in advance!
Ilya.I got it to work! I used a hybrid approach comprised of some of your code and some of Steve Muench's AcceessAppModuleInBackingBean example.
In the setBindings method, I execute an app module method that redefines the query, then I used your code to delete and recreate bindings and iterator:
public void setBindingContainer(DCBindingContainer bc) {
this.bindingContainer = bc;
rebuildVO();
The rebuildVO() method looks like the code you provided in your example:
private void rebuildVO() {
DCDataControl dc;
DispatchAppModule dApp;
DCBindingContainer bc;
DCIteratorBinding it;
OperationBinding operationBinding;
ViewObject vo;
DCControlBinding cb;
try {
bc = getBindingContainer();
dc = bc.findDataControl(DATACONTROL);
dApp = (DispatchAppModule)dc.getDataProvider();
// Execute App Module Method to rebuild VO based upon new SQL Statement.
dApp.setDispatchViewSQL();
vo = dApp.findViewObject(DYNAMIC_VIEW_NAME);
it = bc.findIteratorBinding(DYNAMIC_VO_ITER_NAME);
it.bindRowSetIterator(vo, true);
// logger.info("Remove value binding...");
cb = bc.findCtrlBinding(DYNAMIC_VIEW_NAME);
cb.getDCIteratorBinding().removeValueBinding(cb);
bc.removeControlBinding(cb);
// logger.info("Creating new value binding...");
FacesCtrlRangeBinding dynamicRangeBinding =
new FacesCtrlRangeBinding(null,
bc.findIteratorBinding(DYNAMIC_VO_ITER_NAME), null);
// logger.info("Add control binding...");
bc.addControlBinding(DYNAMIC_VIEW_NAME, dynamicRangeBinding);
} catch (Exception e) {
e.printStackTrace();
And my App Module method that redefines the view object looks like this:
public void setDispatchViewSQL() {
String SQL =
"begin ? := PK_BUsiNESS.F_GETDISPATCHVIEWSQL();end;";
CallableStatement st = null;
String ViewSQL = null;
try {
st = getDBTransaction().createCallableStatement(SQL,
DBTransaction.DEFAULT);
* Register the first bind parameter as our return value of type LONGVARCHAR
st.registerOutParameter(1, OracleTypes.LONGVARCHAR);
st.execute();
ViewSQL = ((OracleCallableStatement) st).getString(1);
findViewObject(DYNAMIC_VO_NAME).remove();
ViewObject vo = createViewObjectFromQueryStmt(DYNAMIC_VO_NAME, ViewSQL);
vo.executeQuery();
} catch (SQLException s) {
throw new JboException(s);
} finally {
try {
st.close();
} catch (SQLException s) {
s.printStackTrace();
When I run it I get my desired results. One thing I don't quite understand is why when the page is first rendered it shows the last set of records rather than the first. Now I have to figure out how to put navigation URLS in each of the table cells.
Thanks for your help; I would not have gotten this far without it,
Jeff
Maybe you are looking for
-
How can i disconnect and delete documents and data from my phone?
Documents and Data from my computer are eating up the storage on my phone. I only have 400 pictures and its saying my storage is full and my phone won't back up to iCloud because my storage is too full but have almost no apps on my phone.
-
This computer is no longer authorized to play purchased items that are on the iPod "John Rowe's iPod touch 2". Would you like to authorize this computer for items purchased from the iTunes Store? When I click authorize it gives me a very old email s
-
Passing array to another class?
I have this code which reads in a text file and stores the data in the race array. import java.io.*; import java.util.*; public class Runner { public static void main(String[] args) throws IOException { BufferedReader in = new BufferedRea
-
When I run the Essbase RKM, I get dimensions back with no datatypes (<Unknown>). "String" is not available in the list for each member, so I pick varchar2 under each member's properties. When I run an interface that uses the Essbase to SQL IKM to put
-
I have read so many nightmares on these pages that I'm tempted to steer well clear of iTunes7, as 6 is doing everything I need. And as I just installed Final Vinyl and got it working with iTunes after some difficulty, I think I should leave well alon