Dynamic Group not updating Workstations

Hello NG
In our environment i created a simple dynamic workstation group.
Unfortunatelly the group will not be updated with the machines that are in
the device list. Only if I touch the rule the machines are imported. I have
to change nothing! Only cklick apply and then the policies are associated to
this dynamic group.
Why this? What could be cause of this issue?
Thanks in advance for your help
Ramon

Dynamic Groups are normally updated once daily, during the overnight hours.
On 4/27/2011 11:21 AM, Ramon Lustrati wrote:
> Hello NG
>
> In our environment i created a simple dynamic workstation group.
> Unfortunatelly the group will not be updated with the machines that are
> in the device list. Only if I touch the rule the machines are imported.
> I have to change nothing! Only cklick apply and then the policies are
> associated to this dynamic group.
>
> Why this? What could be cause of this issue?
>
> Thanks in advance for your help
>
> Ramon
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

Exchange Distribution Groups not updating in Active Directory

Hi all,
I'm not sure if this is intended behaviour or not, but any distribution group we create in Exchange ECP does not update in Active Directory Users and Computers. Any particular reason why?
For example, we have a user group called "Managers" and we've recently created a new group called Area Managers. We've since moved some people out of Managers and put them in Area Managers, however in Active Directory all we see is the Managers
group with all the old managers in there. The OU for the Area Managers group has been set correctly.
Best regards,
Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
Zach Roberts
Independent Microsoft Community Support Advisor
Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
Follow me on Twitter:
@WindowsZach

Hi,
Please run the following command to confirm the members of two groups.
Get-DistributionGroupMember -Identity Area Managers
Get-DistributionGroupMember -Identity Managers
I also suggest to remove the member from “Managers” in AD then check the members of “Managers” in EAC to check this problem.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

TFS Group not updating in Release Manager

I have a bunch of release paths and plans tied to a development group with security for those plans defined by TFS Groups managed by the development team. They recently had a new hire start and added him to their TFS groups but the developer can't
access their release plans in Release Manager. I checked the groups he was added to in TFS in Release Manager and they don't have him listed. I verified that the developer is a member of those TFS Groups via the team's project site. I can't delete
the group and re-add it since it is part of multiple release paths and plans so, short of detaching the group from TFS and adding the user in Release Manager, I can't find a way to get the group to update in Release Manager. Any ideas?

Hi Coding4ever,
Thanks for your reply.
I reproduced this scenario in my RM 2013 Update 4 Client, and received the same result. For this issue, you can try this workaround: open that TFS group in RM Client, click
Detach From TFS button, then click Delete button delete this TFS group from RM Client, then click
New>>New From TFS to re-add this TFS group into your RM Client.
For this TFS group updated users not show in RM Client issue, please
submit it to Microsoft Connect Feedback portal at: https://connect.microsoft.com/VisualStudio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

RV042 Dynamic DNS not updating automatically

I purchased 2 RV042's (h/w version 3) less than two months ago. I updated them to the latest firmware (
v4.0.4.02-tm (Jul 4 2011 13:30:56)), did a factory reset to make sure I was working with a clean slate, set up DDNS through DynDNS and a site to site VPN between the two. Everything was working great for a month, then the DynDNS accounts expired because they weren't being updated.
I reactivated the names on the DynDNS site, and started to monitor the "last updated" date and time. After 24 hours there were no updates according to the DynDNS site. I logged into one of the RV042's, and it said "Dyndns Enabled : Dynamic DNS is updated successfully." This is a stale message from 24 hours ago when I hit save.
So I went into Setup | Dynamic DNS | Edit Config and there it also says "Dynamic DNS is updated successfully." I clicked "Save", status changed to "
Dyndns Enabled : Updating..." for a few seconds, and then back to "Dyndns Enabled : Dynamic DNS is updated successfully". I refreshed the DynDNS website and it shows the current time (in eastern time, i'm pacfic) as the last time it was updated. So it works when I manually hit the "Save" button. Not making any changed, just hitting "Save".
I've let the other RV042 go over 48 hours and it still hasn't updated.
So it apears for the time being, I'll have to remember to push the "Save" button once a week to prevent my DynDNS accout from expiring.
Does anyone have DDNS working in the lastest firmware and h/w version 3? If so, what is the update frequency?
I'd like to hear any suggestions on how I might be able to fix this, or if this needs to be fixed in the next firmware release. Hopefully, I've explained my problem clearly.

Jasbryan,
I am experiencing a problem with DynDns updater too. For me it seems that the updater (after a public IP change or reboot) only tries to update once, and if it failed then gives up and never tries again.
I have to update manually (pushing the update button) which sooner or later succeeds. (Sometimes the first trial is successful, sometimes only the second or third.)
I have an RV042 (v3) with firmware at 4.1.1 and a DynDns Pro subscription.
I have a site-to-site VPN between two RV042s, both with dynamic IP. When the VPN tunnel drops, I usually detect that one of the public IPs has changed and the router for some reason failed to update DynDns. If I do it manually pushing the update button (one or more times), the tunnel comes up of course.
Again, I suspect the problem is with the updater's "strategy" and timing. Should it wait a bit more after detecting a new public IP and retrying in every 5-10 minutes after a failed update attempt it would be more reliable.
Janos

Office365 Exchange Security Group not updating in Sharepoint Online

We have created a new Office365 Exchange Security Group that contains several other Exchange Security Groups. This group will not show up in either the SharePoint Web admin or SharePoint Designer views.
How can I force SharePoint to re-synchronize the Office365 Tenant users/groups?

Hi,
According to your post, my understanding is that Office365 Exchange Security Group does not updating in Sharepoint Online.
How long did you wait after creating the Group to see if they show up in SharePoint Online? The back-end replication can take some time, even days from my experience.
Here is a similar thread for your reference:
http://community.office365.com/en-us/f/156/t/173994.aspx
More information:
CIAOPS: Using Office 365 security groups with SharePoint Online
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

BOXI R2 SP4 (FP 4.1) Windows AD Groups not updating

I just patched my BO XI R2 server to service pack 4 and applied fix pack 4.1. I am having an issue where my Windows AD groups are not updating correctly. When I log into the CMC and go to users, click on an account name and then click on the "Member of" tab, I don't see the Windows AD groups that the user belongs to. However, when I go to "Groups", click on the group name that the user is supposed to belong to and then click on "Users", I see the user's account name/login. Has anyone else seen this problem? I have tried the following:
- remove the user from the Windows AD group using Active Directory Users & Groups and adding them back in
- adding the user into a new Windows AD group and import that AD group
This is currently a pretty big problem for me so if anyone has any insight into how to fix this, I would greatly appreciate it. Thanks so much.
David Tjen
Art.com

Hi Glen,
It is expected that if changes are made in AD (that don't remove a user from all groups) will not be instant on the CMS. When you go to a group and click on the members/users tab. You will be prompted that this query may take some time. This action sends a live query to AD and therefore should be up to date. When you click on a user and try to view the groups for which they are a member this is not a live query but rather accesses a graph that the CMS maintains in memory. This graph is set to refresh every 15 minutes by default so there should at least be a 15 minute delay. Then the time to update the graph can vary as well. If you have 1 groups it should take a few seconds, but if you have 1000's of groups or many nested groups it could take much longer. To initiate this process you can hit update in the CMC\auth\AD or restart the CMS. If you find that this is not how the system is working, then it is best to open a message with support. These cases can be quite involved and usually require considerable CMS tracing and maybe packet scanning to resolve.
Hope this explains things....
Regards,
Tim

Dynamic group not working

Hi,
I'm trying to get a dynamic group working with the oracle directory server enterprise edition 11.1.1.5.0 .
I've created a dynamic group like this:
dn: cn=employees,ou=groups,dc=example,dc=com
cn: employees
objectclass: top
objectclass: groupOfURLs
ou: groups
memberURL: ldap:///ou=people,dc=example,dc=com??sub?(uid=*)
but when I check for the membership, I'm just getting the dn of the user with uid = "me", but nothing else.
ldapsearch -h localhost -p 389 -D "cn=Directory Manager" -w password \
-b dc=example,dc=com "(uid=me)" isMemberOf
There was a similar question like that in the forum, but no useful answer.
Does anyone know how dynamic groups work correctly?
best regards, solst_ice

Hi,
Ismemberof is supported for static groups only in DSEE. Dynamic group are group definition that client apps can retrieve but there is no built-in membership evaluation in the core server.
You might want to consider Oracle Unified DIrectory that support ismemberOf for static and dynamic groups
See http://docs.oracle.com/cd/E37116_01/index.htm and Managing Users and Groups - 11g Release 2 (11.1.2)
Regards,
-Sylvain

Address book groups not updated in iSync and iTunes-iPod-info sync

Changes to address book groups are not reflected in iSync and iTunes. I.e. if I remove a group or add a group it is still the old list of groups that is listed in iSync and iTunes available for syncing with my phone or iPod. How do I get these list to be updated and reflect the present list in Address Book?

The suggested resolution essentially said "delete the address book and start over."
Ok, I can see how this will help but... a few questions:
1. How to I re-load the address book with my 500+ contacts without loosing my groups and all the data? The suggestion in the other discussion doesn't give any guidance on this
2. What caused the problem to begin with? In other words, how can I prevent it from happening again?
I discovered the syncing problem about the time I did the following three things:
1. Upgraded to 10.5.2
2. Upgraded my iPhone (and iTunes) to 1.1.4
3. Installed Bento (possibly a red herring) -- but it DOES connect to address book

Group not updating.

I am using the csutil -i command to complete an update and move users from one group to another. The text file has the UPDATE:<user name>:PROFILE:7 syntax and works great as far as you can see on the ACS GUI. However, when you run a csutil -d, the user maintains it original group. So, if it was in group5 and you updated so it would go to group7, the dump.txt would still say group5. Now, if you look at the user that was suppose to be updated, it has switched groups from group5 to group7. And if you click submit and then do a csutil -d, you will see that the group has now changed from group5 to group7. Is there a way to do a global submit on users in a group? I have done submit and restarts all over the place and that does not work. Any ideas? Thanks

As far as I know, you cannot do a global submit on users in a group

Contact Groups not updating

So I recently set up a few groups of contacts in my MobileMe account. The usual friends, family, businesses, etc. I had "push" set to on and the next day I checked my contact groups on my phone. I could see the groups listed, but when I opened any group, it was a blank list.
I double checked that I had properly set up the contact groups in my MobileMe account and found that they are still setup properly.
So my question is does anyone know why I'm getting the newly created groups pushed to my phone without any of the contacts that should be included listed?

There is an easier fix for this than creating a dummy contact. You just need to refresh the Mobile Me account on your iPhone. Follow these steps to do so and all of the contacts you put in the groups on MobileMe will show up on your phone.
1. On Iphone go to "Settings"
2. In settings, go to "Mail, Contacts, Calendars"
3. Under the Accounts, select your MobileMe Account
4. Turn the Contacts button to "Off". You will get a pop up stating "Synced Contacts will be removed from your iPhone". Click the "Stop Syncing" button. This will remove all your MobileMe Contact data from your iPhone. When you select the button you will see a window with a spinning icon stating "Turning of Syncing". Wait for this to finish.
5. Once Syncing has been turned off. Turn it back on again.
6. Hit the home button to exit the settings.
7. Open up the Contacts application. When you first open it, there will be no contact data, but the network activity indicator will be spinning. The phone is downloading all the MobileMe data again.
8. Once it is done, you will see all the contacts (but the group button will be missing). Hit the home button again to exit the app.
9. Open the Contacts app again. The Groups button will appear. Click on the group you created and you will see all the contacts you added on MobileMe for that group.
It looks like every time you add a new group you will need to do this. But if you only add a new contact to an existing group, it will update on the iPhone with no problem.

SCOM Dynamic Group not Showing Health Watcher

I have the following code which shows a group of servers based on a registry key value. I am trying to add in the health watcher for heartbeat alerts. The computers show up in the group, but not the health watcher. What am I doing wrong?
      <Discovery ID="UINameSpace5f2cab25dac54b879a72830bf59d283a.Group.DiscoveryRule" Enabled="true" Target="UINameSpace5f2cab25dac54b879a72830bf59d283a.Group" ConfirmDelivery="false" Remotable="true"
Priority="Normal">
        <Category>Discovery</Category>
        <DiscoveryTypes>
          <DiscoveryRelationship TypeID="MicrosoftSystemCenterInstanceGroupLibrary7585010!Microsoft.SystemCenter.InstanceGroupContainsEntities" />
        </DiscoveryTypes>
        <DataSource ID="GroupPopulationDataSource" TypeID="SystemCenter!Microsoft.SystemCenter.GroupPopulator">
          <RuleId>$MPElement$</RuleId>
          <GroupInstanceId>$MPElement[Name="UINameSpace5f2cab25dac54b879a72830bf59d283a.Group"]$</GroupInstanceId>
          <MembershipRules>
            <MembershipRule>
              <MonitoringClass>$MPElement[Name="Type80531327bc2f439dba7c289399a2728e"]$</MonitoringClass>
              <RelationshipClass>$MPElement[Name="MicrosoftSystemCenterInstanceGroupLibrary7585010!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
              <Expression>
                <SimpleExpression>
                  <ValueExpression>
                    <Property>$MPElement[Name="Type80531327bc2f439dba7c289399a2728e"]/AttributeDiscoveryGeneratedByUI9bc587a1ea5f4493a7d745766a57b922$</Property>
                  </ValueExpression>
                  <Operator>Equal</Operator>
                  <ValueExpression>
                    <Value>TEST</Value>
                  </ValueExpression>
                </SimpleExpression>
              </Expression>
            </MembershipRule>
<MembershipRule>
<MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthServiceWatcher"]$</MonitoringClass>
<RelationshipClass>$MPElement[Name="MicrosoftSystemCenterInstanceGroupLibrary7585010!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
<Expression>
    <Contains>
      <MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthService"]$</MonitoringClass>
      <Expression>
        <Contained>
          <MonitoringClass>$MPElement[Name="MicrosoftWindowsLibrary7585010!Microsoft.Windows.Computer"]$</MonitoringClass>
          <Expression>
            <Contained>
              <MonitoringClass>$Target/Id$</MonitoringClass>
            </Contained>
          </Expression>
        </Contained>
      </Expression>
    </Contains>
</Expression>
</MembershipRule>
          </MembershipRules>
        </DataSource>
      </Discovery>
Thanks in advance. I have followed all the threads and I am not able to determine what is incorrect.
Mike Hanlon

Hi Mike,
Your group does not contain Windows Computers:
<MembershipRules>
            <MembershipRule>
              <MonitoringClass>$MPElement[Name="Type80531327bc2f439dba7c289399a2728e"]$</MonitoringClass>
That's why the second expression is always false.
http://OpsMgr.ru/

DIP fails loading dynamic groups into OID

Hello,
we're trying to load groups from OeBS into OID and associate them via dynamic groups feature with user records that was loaded earlier as follows:
personid=18630,cn=dev,cn=hrsyncusers,cn=users,dc=ic,dc=lan
orcltimezone=Asia/Yekaterinburg
displayname=NOT ASCII
employeetype=NOT ASCII
givenname=NOT ASCII
postalcode=628484
orcldateofbirth=19610404000000
orclgender=F
departmentnumber=342
uid=18630
mail=HRNULL
cn=NOT ASCII
initials=NOT ASCII
street=NOT ASCII
employeenumber=4824
middlename=NOT ASCII
l=NOT ASCII
orclhiredate=20051107000000
sn=NOT ASCII
personid=18630
c=Russia
title=NOT ASCII
objectclass=inetorgperson
objectclass=person
objectclass=organizationalperson
objectclass=orcluserv2
objectclass=kapitalperson
objectclass=country
objectclass=residentialperson
objectclass=locality
objectclass=top
Among other attributes each user entity has 'departmentNumber' that indicates number of his/her department.
Now trying to load list of departments as dynamic groups with the following config
files:
*** DevHRAgentGroups.cfg ***
[SELECT]
SELECT psv.version_number
, pos.name hierarchyname
, hou.organization_id depno
, poe.organization_id_parent parent_id
, REPLACE(hou2.name, '"') parentname
, poe.organization_id_child child_id
, REPLACE(hou.name, '"') orgname
, ldap://idm01.ic.lan:389/cn=DEV,cn=HRSyncUsers,cn=Users,dc=ic,dc=lan??sub?(depar
tmentnumber='||hou.organization_id||')' ldapuri
, hrl.meaning org_type
FROM per_organization_structures pos
, per_org_structure_versions psv
, per_org_structure_elements poe
, hr_all_organization_units hou
, hr_all_organization_units hou2
, hr_lookups hrl
WHERE pos.business_group_id = psv.business_group_id
AND pos.organization_structure_id = psv.organization_structure_id
AND pos.primary_structure_flag = 'Y'
AND psv.date_to IS NULL
AND poe.org_structure_version_id = psv.org_structure_version_id
AND poe.business_group_id = hou.business_group_id
AND poe.organization_id_child = hou.organization_id
AND poe.business_group_id = hou2.business_group_id
AND poe.organization_id_parent = hou2.organization_id
AND hrl.lookup_code = hou.type
AND hrl.enabled_flag = 'Y'
AND hrl.lookup_type = 'ORG_TYPE'
AND hrl.lookup_code NOT IN (30,40)
AND TRUNC(SYSDATE) BETWEEN hou.date_from AND NVL(hou.date_to, TO_DATE('31.12.4712','dd.mm.yyyy'))
AND hou.last_update_date >= to_date(:BINDVAR,'YYYYMMDDHH24MISS')
*** DevHRAgentGroups.map ***
DomainRules
NONLDAP:cn=DEV,cn=HRSyncGroups,cn=Groups,dc=ic,dc=lan:departmentID=%,cn=DEV,cn=HRSyncGroups,cn=Groups,dc=ic,dc=lan
AttributeRules
orgname:1: : :cn: :groupOfUniqueNames
depno:1: : :departmentID: :kapitalDepartment
ldapuri: : : :labeledURI: :orclDynamicGroup
We're getting the following error in ?/ldap/odi/log/DevHRAgentGroups.trc during HRAgent execution at mapping phase:
Normalized DN : departmentid=82,cn=dev,cn=hrsyncgroups,cn=groups,dc=ic,dc=lan
Changetype is 5
Processing modifyRadd Operation ..
Entry Not Found. Converting to an ADD op..
Processing Insert Operation ..
Performing createEntry..
Exception creating Entry : javax.naming.NamingException: [LDAP: error code 1 - Dynamic group cache update failed.]; remaining name 'departmentid=82,cn=dev,cn=
hrsyncgroups,cn=groups,dc=ic,dc=lan'
[LDAP: error code 1 - Dynamic group cache update failed.]
javax.naming.NamingException: [LDAP: error code 1 - Dynamic group cache update failed.]; remaining name 'departmentid=82,cn=dev,cn=hrsyncgroups,cn=groups,dc=i
c,dc=lan'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3028)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_createSubcontext(LdapCtx.java:777)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_createSubcontext(ComponentDirContext.java:319)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:248)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:236)
at javax.naming.directory.InitialDirContext.createSubcontext(InitialDirContext.java:176)
at oracle.ldap.odip.gsi.LDAPWriter.createEntry(LDAPWriter.java:1162)
at oracle.ldap.odip.gsi.LDAPWriter.insert(LDAPWriter.java:425)
at oracle.ldap.odip.gsi.LDAPWriter.modifyRadd(LDAPWriter.java:822)
at oracle.ldap.odip.gsi.LDAPWriter.writeChanges(LDAPWriter.java:349)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:655)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:376)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:237)
DIP_LDAPWRITER_ERROR_CREATE
Error in executing mapping DIP_LDAPWRITER_ERROR_CREATE
DIP_LDAPWRITER_ERROR_CREATE
Please, note. Loading is successful if we commenting out mapping line for labeledURI attribute (that's loading static groups).
Loading is also successful when labeledURI is mapped to
'ldap://idm01.ic.lan:389/cn=DEV,cn=HRSyncUsers,cn=Users,dc=ic,dc=lan??sub?(objec
tclass=person)' but this definetly is not what we are going to get.
I don't have ideas what's wrong for example with the following generated 'labeledURI' attribute:
ldap://idm01.ic.lan:389/cn=DEV,cn=HRSyncUsers,cn=Users,dc=ic,dc=lan??sub?(departmentnumber=82)
Any help is appreciated
Thanks,
Edward

Hi Frank,
there is something wrong with departmentnumber attribute of user records. Searching users with ldapsearch using "departmentnumber=*" filter fails with the following error:
ldap_search: DSA is unwilling to perform
ldap_search: additional info: Function Not Implemented
I think this is probably the cause of failing creation of dynamic groups.
Searching on other user attributes (cn, uid, employyenumber) works fine.
Still don't understand what's wrong with this particular attribute.

Best Solutions For Offline Address Book on Workstations Not Updating Frequently Enough?

We use Exchange 2010 SP2 and we set Outlook 2010 to Exchange Cached mode by default for all workstations. This seems to work OK for the majority of email most of the time, but because we are very frequently adding and removing external mail contacts
and and adding and removing them from distribution lists, the GAL and distribution lists memberships are frequently out of date in the middle of the work day.
Sometimes the users can manually download an updated OAB assuming it has been updated on the server, but sometimes the OAB is not updated yet and redownloading the OAB solves nothing. It is a lot of hassle, confusion about bounced messages and
missing contacts and phantom names in distribution lists with this method.
I notice that for mail contacts, there is an All Contacts address book that is live, but it does not include include anything else other than contact addresses. Distribution List memberships are still out of date until the OAB is updated on the server
and then downloaded to the Outlook client. This is taking too long.
Is there a keyboard shortcut to force the client to do a GAL address lookup in online mode rather than using the cached OAB?
Can Outlook display both an online and offline address book for the GAL and let the user manually select online version of the GAL if a contact or new mailbox or DL has not synced to the OAB yet?
If we set the registry key to force online address books even when Outlook is in cached Exchange mode, is there any performance downside for PCs on the LAN other than the GAL being unavailable when the network is not available?
Would the Exchange server have a significantly higher load if most PCs were accessing the GAL without an OAB cache?
If we should not expect a significant increase in server load or network traffic, we might set desktops to use online access to the GAL and only laptops to use OAB.

Hi,
If users are accessing the GAL without OAB cache, definitely it will increase in server load and network traffic. If you are in cached mode, one suggestion is to define that in Send/Receive Settings:
Go to Send/Receive Groups -> Define Send/Receive Groups
-> Select the account and Edit -> Select
Include the selected account in this group, and check Download offline address book -> Click
OK -> Go back to Send/Receive Groups, select the frequency for automatic send/receive(Schedule an automatic send/receive every x minutes.), and then close.
I hope this setting can help in your scenario.
Regards,
Melon Chen
TechNet Community Support

RRM RF Group Leader not updating RF Group Members

We cannot get RRM RF Group Leader to update the RF Group Members. On our group leader controller, it sees our other controllers in the RF group. We have APs assigned to all four of our controllers and the tx power and dynamic channel assignment do not work. When we put all of the APs onto the RF group leader controller, the tx power levels and dynamic channel assignment both work as they are supposed to. All of our settings on our controllers are exactly the same. I guess my question is, is there a set of specific settings that I need to apply before RRM starts to update from the RF group leader?

We have all four of our controllers on the same RF Domain Name. We have verified the status of the Mobility Group using eping and mping. We split up our APs on two of our controllers that are in the same 6500 and it still would not update from the RRM Group Leader. We "tricked" the WLC into moving the group leader onto the other controller that was in the same 6500. The same thing happened, now the 2nd controller won't send updates to the original controller. We moved all the APs onto the group leader and everything worked fine.

Software Update Group not created...?

SCCM 2012 R2
So I'm working on patching up our servers and am not sure how the Software Update Group gets created.
I created an Automatic Deployment Rule for the group of machines I want to patch and chose to Add to an existing Software Update Group. However, it never prompted me for what group to update. I checked under Software Update Groups and only have
ones from our workstations that have been in there for a while.
Do I have to manually create the Software Update Group for the servers to use and if so, where do I do that in the Confir Manager program?
Also, on a side note, when I view my ADRs, a couple of them say: Auto Deployment Rule results exceeded maximum number of updates. Not sure if that's when I need to somehow break them up into Monthly groups or something like that?
I know there's a hard limit of updates per something but this was all originalyl configured by an external consultant so no one here is fully up to speed on all the nuances yet.
Thanks!

OK, so my ADRs are setup so that they all run on a certain date and then the have a 0, 7, or 14 day delay on when the patches become available so certain groups patch each weekend. Since they all failed with the Too many patches error, I need to redo
them. If I make the changes and then do a "Run Now" to force them to update, will it start the 7 day delay over from when I do the Run Now or will that still go from the original date?
And if I have the patches set to Deadline immediately, but have maintenance windows setup as Saturday 1AM - 11PM, and do not have the checkboxes checked to allow them to go outside a maintenance window, I can still do the Run Now any time and all the patches
will then install at 1 AM on Saturday. right? Just don't want things to start installing in the middle of the day and mess everything up. :)
Thanks!

Dynamic Group not updating Workstations

Similar Messages

Maybe you are looking for