Dynamic group of DHCP 2012 windows server objects

Dear All,
We need to create a SCOM dynamic group to have Windows server object of DHCP 2012 installed servers.
Went through
this post and tried to edit the mp xml file by inserting below mentioned lines. But, i couldn't import the MP back.
             <Contains>
                          <MonitoringClass>$MPElement[Name="DHCP!Microsoft.Windows.DHCPServer.2012.Server"]$</MonitoringClass>
             </Contains>
Could you help me with this?
Thanks
Santhosh

I suggest you use mpverify to verify the mp first.
Juke Chou
TechNet Community Support

Similar Messages

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan Muthuraman

Hi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 - Dynamic Group based on a windows service

So here is the situation, I have 12 servers with a windows service called acidicalien. What i'd like to do is dynamically group all the servers running this service together. I kind of worked out I need a group and I need to define the dynamic
criteria, but I can't seem to find which elements I need to select to get the group to dynamically include servers with just that service.

Raju - I am trying to accomplish the same with this statement. Can someone help me with the right syntax or documentation. Microsoft does has very poor documentation on how to use Dynamic Groups in SCOM.
( ( Object is Windows Computer AND True ) ( Object is Windows Service AND ( Service Name
Equals SnapDrive ) AND ( ( Service Name
Equals SWSvc ) OR False ) ) OR False )

SSRS 2012 - Windows Server 2012 R2 issue with OLEDB Connection String

Hoping someone can help. As stated above, we are running SQL Server 2012 with SP1 on Windows Server 2012 R2. When I create a Data Source as follows in Reporting Services, I receive the following error message. Any thoughts on why this fails? The same data
source works on Windows Server 2008 R2 Enterprise SQL Server 2008 R2.
Data Source type: OLE DB
Connection string: Provider=Microsoft.ACE.OLEDB.12.0;Data Source="\\networknamehere\CSVFiles";Mode=Read;Extended Properties="text;HDR=YES;FMT=CSVDelimited"
ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CSV_Datasource'. ---> System.Data.OleDb.OleDbException:
Unspecified error
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at Microsoft.ReportingServices.DataExtensions.ConnectionExtension.Open()
at Microsoft.ReportingServices.Diagnostics.DataExtensionConnectionBase.OpenConnection(IProcessingDataSource dataSourceObj, DataSourceInfo dataSourceInfo, IDbConnection conn)
--- End of inner exception stack trace ---;

Hi ABAA101,
According to your description, when you use csv file as data source in SSRS 2012 report, you got the error message.
I tested the issue in my local machine, due to some policy restrictions, I could not install Access in my local machine. To workaround the issue, we can use the connection string like below:
Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\\report;
Extended Properties="text;HDR=Yes;FMT=Delimited"
The csv file is stored in report folder in C driver.
In Query text box in the dataset, we can use the query like below:
Select * from new.csv
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How to configure IPv6 DHCP on Windows Server 2012?

I see LOTS of help and what to do for IPv4, but it's a ghost town for IPv6 DHCP configuration? Hardly anything on youtube etc that shows this simply. Lots of complicated unrelated IPv6 stuff though.
Seems many here as best practice set up server to handle DHCP. Not router or firewall. So how are you setting up IPv6 on the server?
Anyone have any tutorials or simple step by step help how to properly configure DHCPv6 on server?
Currently the router is handling DHCP. I want to use Active Directory. I know its best to have server handle DHCP, but will AD work just fine with router doing both ipv4 and ipv6 dhcp and for simplicity and wireless? Small 5 user office.
Thank you.
This topic first appeared in the Spiceworks Community

I see LOTS of help and what to do for IPv4, but it's a ghost town for IPv6 DHCP configuration? Hardly anything on youtube etc that shows this simply. Lots of complicated unrelated IPv6 stuff though.
Seems many here as best practice set up server to handle DHCP. Not router or firewall. So how are you setting up IPv6 on the server?
Anyone have any tutorials or simple step by step help how to properly configure DHCPv6 on server?
Currently the router is handling DHCP. I want to use Active Directory. I know its best to have server handle DHCP, but will AD work just fine with router doing both ipv4 and ipv6 dhcp and for simplicity and wireless? Small 5 user office.
Thank you.
This topic first appeared in the Spiceworks Community

Dynamic group for HSW object based on Site (Gateway) server

Hi
Using the SiteName parameter when deploying gateway servers like described in the blog post from Cameron Fuller
http://blogs.catapultsystems.com/cfuller/archive/2015/02/12/creating-dynamic-groups-for-objects-which-exist-behind-a-gateway-in-opsmgr-part-1.aspx
I would like to create an aditional dynamic Group with all Health Service Watcher objects related to an Site (Autocreate) Group.
Any ideas on the XML Query or other ways of duing this?

Yes I know this one, but the SiteName Group is not in my MP.
So I need to reference the XML to a Group outside of my own MP.
Like:
http://blogs.technet.com/b/kevinholman/archive/2014/04/09/creating-groups-of-health-service-watcher-objects-based-on-other-groups.aspx
But with the '<MonitoringClass>$MPElement[Name="grouptest.compgroup"]$</MonitoringClass>'
Line pointing to a autocreated SiteName Group.

I have windows server 2012 R2 and install active directory

My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
Have not registered domain only install active directory to test.
So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine.
Please give me a solution for this.
This is the setup for a test use only so their not big environment connect with my pc.
Thanks in advance.
Regards,
Krunal

Hi,
The following article is talking about creating and managing Group Policy on a Windows Server 2012:
http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
Group Policy Overview
http://technet.microsoft.com/en-us/library/hh831791.aspx
Please feel free to let us know if you need further assistance.
Regards.
Vivian Wang

The lease timeout between avaiability group and the Windows Server Failover Cluster has expired

Hi,
I am having some issues where I get a lease timeout from time to time. I have a Windows 2012 Failover Cluster with 2 nodes and 2 SQL 2012 Always-on Availability Groups. Both nodes
are a physical machines and each node is the primary for an AG.
From what I understand if
the HealhCheckTimeout
is exceeded without the signal exchange the lease is declared 'expired' and the SQL Server resource dll reports that the SQL Server availability group no longer 'looks alive' to the Windows cluster manager. Here are the properties I have setup
which are the default settings:
LeaseTimeout - 20000
HealthCheckTimeout - 30000
VerboseLoging - 0>
FailureConditionLevel – 3
Here are the events that occur in the Application Event Viewer:
Event ID 19407:
The lease between availability group 'AG_NAME' and the Windows Server Failover Cluster has expired. A connectivity issue occurred between the instance of SQL Server and the Windows Server Failover
Cluster. To determine whether the availability group is failing over correctly, check the corresponding availability group resource in the Windows Server Failover Cluster.
Event ID 35285:
The recovery LSN (120881:37533:1) was identified for the database with ID 32. This is an informational message only. No user action is required.
SQl server logs are too long to post in this box but I can send them if you request.
The AG is setup to failover automatically but it did not failover. I am trying to figure out why the lease timed out. Thanks.

From what I've been able to find out, this is due to an issue with the procedure sp_server_diagnostics. It sounds like the cluster is expecting this procedure to regularly log good status "Clean" in the log files, but the procedure is designed not
to flood the logs with "Clean" messages, so only reports changes, and does not make an entry when the last status was "Clean" and the current status is "Clean". The result is that the cluster looks to be unresponsive. However, once it initiates
the failover, the primary machine responds, since it was never really down, and the failover operation stops.
The end result is that there really never is a failover, but the database becomes unavailable for a few minutes while this is resolved.
I'm going to try setting the cluster's failure condition level to 2 (instead of 3) and see if that prevents the down time.
blogs.msdn.com/b/sql_pfe_blog/archive/2013/04/08/sql-2012-alwayson-availability-groups-automatic-failover-doesn-t-occur-or-does-it-a-look-at-the-logs.aspx

Migrate SBS 2003 with AD and Exchange to Windows Server 2012 Standard

We are using SBS 2003 and we have configured Exchange server and AD with DNS and DHCP. Now we are planning to move SBS 2003 to Separate servers like windows server 2012 standard AD with DNS and DHCP and Windows server 2012 Standard with Exchange
2010.
Is it Possible?? we need step by step guide.
Thanks in advance.

Hi,
You probably would not find any step by step guide for this kind of migrations. If you are not comfortable with doing such migrations I would recommend to if you need to do it your self do some test migrations. Or otherwise get help by a local IT company
that is familiar with migrations.
But to give you some information, first thing before starting a migration is check the health of your SBS 2003 server / domain. Use tools like dcdiag, netdiag and best practice analyzer. I wrote a blog post about steps to think about before you start this
might help: http://blog.ronnypot.nl/?p=914
When every thing is clean you can start adding the new windows server 2012 machines as member servers to your domain.
Next you can promote one of the servers to additional domain controller on your domain (Keep in mind SBS needs to hold all FSMO roles so moving these is the last step your should do.) Also promoting a windows server 2012 to domain controller has slightly
changed, you need to install the ADDS role and follow the wizard to promote the server to a DC.
With installation of the new DC install DNS allongsite it will automatic replicate settings during confiugration.
DHCP must be installed manual, depending on your scope and settings it might be as easy to create a new scope and disable the old dhcp server.
On the server Exchange needs to be installed, make sure you install and do all pre-requirements. Than install Exchange it will automaticly detect you already have an Exchange organization and is installed as additional server. You can configure all settings
and when everything is configured right you start moving mailboxes.
When everything is moved away from the SBS 2003 server, uninstall exchange, move the FSMO roles to the new DC and after that demote the sbs 2003 server so it is not listed anymore as an additional DC in the domain. Last would be shutdown the server and remove
all records left in AD and DNS.
There is this guide for migrating SBS 2003 to windows server 2008 R2 and Exchange 2010, this might give you some usefull information, not everything will be the same but it is a good start:
http://demazter.wordpress.com/2010/04/29/migrate-small-business-server-2003-to-exchange-2010-and-windows-2008-r2/
Regards Ronny
Visit my Blog or follow me on
Twitter

Report Viewer error in Windows Server 2012 & Windows Sever 2012 R2

Hi,
I have created an application with .net & C#. I have used Report viewer 2008 for generating report. Now I am trying to use this application on Windows Server 2012 & Windows Server 2012 R2. But I am getting the error related to assembly not getting
loaded.
I am clueless why this is happening.The same application is working fine in Windows server 2008 R2. The error which I am getting is:-
Please help me with this and suggest me how to resolve above error and any workaround for this.
Thanks for help.

Hi
Vishwajeet (MCA,MCP,MCTS,MCITP),
Like your title mentioned, your case related to Report Viewer, For case related to
Report Viewer should be posted in
Other Forums> Visual Studio Report Controls
forum. That describers:
Discuss reporting functionality including the integrated report designer and viewer controls for adding rich data reports to Windows Forms and ASP.NET applications.
Visual C# forum is Discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools.
Now I will move your thread to Visual Studio Report Controls forum for better support.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error 0x80070643 when installing DHCP Windows Server 2008 ENTERPRISE SP2 64bit

When I try to install role DHCP on Windows Server 2008 I get the following error:
Attemp to install DHCP Server failed with error code 0x80070643. Fatal error during installation.
Please somebody help me!....
Jorge

Hi Jorge,
I am sorry to hear that.
Here are a few things that I suggest you try:
Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
If you have Windows Process Activation service installed on the machine, uninstall it.
Open required RPC ports.
More information for you:
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017#method7
If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
Regards,
Amy

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

Window Server cannot connect to Router?

I have installed a windows server 2012 r2 datacenter on virtual box using windows7. I installed AD Ds, DHCP and DNS on it. To install DHCP on window server I first disabled the DHCP service on my router and then on server I changed the ip address to static(10.1.10.2)
and added default gateway as 10.1.10.1 (IP address of router). But by doing that my server and other computer connected to network are not connecting to router.(i tried pinging router)? I am a student and I am working on a test lab using d-link router which
is further connected to main house router.
Thanks

Hi please check this artical hope this helps
https://blogs.oracle.com/fatbloke/entry/networking_in_virtualbox1

Can I add a 2012 R2 server to a 2008 SP1 DFS?

I have a DFS system on a Server 2008Stnd SP1. I am adding a new VM Server 2012 R2 server at my data center. I want to add my 2012 server to the DFS and remove the 2008 server after it syncs. I will add a new 2012 server at my main site later. Can this
be done? Or can I add a new DFS using the 2012 server?

Yes you can.
You can add your Windows Server 2012 to current DFS replication group and remove the Windows Server 2008 after replication finished. However it is recommended to do a pre-staging instead of waiting for the initial replication as it will take a long time
if data size is large.
And creating new DFS namespace is also fine on that Windows 2012 system.
If you have any feedback on our support, please send to [email protected]

Is it possible to install Firefox on Windows Server 2008?

I try to install Firefox 3.6 on Windows server 2008 but it says that the file is corrupted.
Is it possible to install Firefox on Windows Server 2008?

From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed.

Dynamic group of DHCP 2012 windows server objects

Similar Messages

Maybe you are looking for