Dynamic Internal Table for reading data from external file
Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
Kumar
Hi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards
Similar Messages
-
Reading data from flat file Using TEXT_IO
Dear Gurus
I already posted this question but this time i need some other changes .....Sorry for that ..
I am using 10G forms and using TEXT_IO for reading data from flat file ..
My data is like this :-
0|BP-V1|20100928|01|1|2430962.89|27|2430962.89|MUR|20100928120106
9|2430962.89|000111111111|
1|61304.88|000014104113|
1|41961.73|000022096086|
1|38475.65|000023640081|
1|49749.34|000032133154|
1|35572.46|000033093377|
1|246671.01|000042148111|
Here each column is separated by | . I want to read all the columns and want to do some validation .
How can i do ?
Initially my requirement was to read only 2 or 3 columns so i did like this ...
Procedure Pay_Simulator(lfile_type varchar2,lac_no varchar2,lcur varchar2,lno_item number,ltotal number,ldate date,lpay_purp varchar2,lfile_name varchar2)
IS
v_handle utl_file.file_type;
v_filebuffer varchar2(500);
line_0_date VARCHAR2 (10);
line_0_Purp VARCHAR2 (10);
line_0_count Number;
line_0_sum number(12,2);
line_0_ccy Varchar2(3);
line_9_sum Number(12,2);
line_9_Acc_no Varchar2(12);
Line_1_Sum Number(12,2);
Line_1_tot Number(15,2) := 0;
Line_1_flag Number := 0;
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
Begin
v_file := mcb_simulator_pkg.GET_FILENAME(lfile_name); -- For the file name
v_path :=rtrim(regexp_substr( lfile_name , '.*\\' ),'\'); For the Path
v_path := SUBSTR (lfile_name,0, INSTR (lfile_name, '\', -1));
v_handle := UTL_FILE.fopen (v_path, v_file, 'r');
LOOP
UTL_FILE.get_line (v_handle, v_filebuffer);
IF SUBSTR (v_filebuffer, 0, 1) = '0' THEN
SELECT line_0 INTO line_0_date
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
SELECT line_0 INTO line_0_Purp
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 4;
SELECT line_0 INTO line_0_count
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 7;
SELECT line_0 INTO line_0_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 8;
SELECT line_0 INTO line_0_ccy
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 9;
ELSIF SUBSTR (v_filebuffer, 0, 1) = '9' THEN
SELECT line_9 INTO line_9_Acc_no
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_9, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
SELECT line_9 INTO line_9_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_9, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 2;
ELSIF SUBSTR (v_filebuffer, 0, 1) = '1' THEN
line_1_flag := line_1_flag+1;
SELECT line_1 INTO line_1_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_1, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
Line_1_tot := Line_1_tot + line_1_sum;
END IF;
END LOOP;
DBMS_OUTPUT.put_line (Line_1_tot);
DBMS_OUTPUT.PUT_LINE (Line_1_flag);
UTL_FILE.fclose (v_handle);
END;
But now how can i do ? Shall i use like this select Statement for all the columns ?Sorry for that ..
As per our requirement ...
I need to read the flat file and it looks like like this .
*0|BP-V1|20100928|01|1|2430962.89|9|2430962.89|MUR|20100928120106*
*9|2430962.89|000111111111|*
*1|61304.88|000014104113|*
*1|41961.73|000022096086|*
*1|38475.65|000023640081|*
*1|49749.34|000032133154|*
*1|35572.46|000033093377|*
*1|246671.01|000042148111|*
*1|120737.25|000053101979|*
*1|151898.79|000082139768|*
*1|84182.34|000082485593|*
I have to check the file :-
Validation are 1st line should start from 0 else it should raise an error and insert that error into one table .
The for 2nd line also same thing ..it should start from 9 else it should raise an error and insert that error into one table .
Then the 3rd line should start from 1 else it should raise an error and insert that error into one table .
After that i have to do a validation like i will read the 1st line 2nd column .. It should be like this BP-V1 else raise an error and insert that error to a table . Then i will check the 3rd column which is 20100928 , it should be YYYYMMDD format else same thing ERROR.
Then like this for all columns i have different validation .......
Then it will check for the 2nd line 3rd column . this is an account no .1st i will check it should be 12 char else ERROR .Then I will check that what user has imputed in the form.Like for example User putted 111111111 then i will check with this 000111111111 which is there in the 2nd line . I have to add 000 before that Account no which user imputed .
Then the lines which is starting from 1 , i have to take all the 2nd column for all the lines which is starting from 1 and i have to do a sum . After that i have to compare that sum with the value in the 1st lines ( Starting from 0) 6th column . It should be same else ERROR ...
Then same way i have to count all the lines which is starting from 1 . Then i have to compare with the 7th column of 1st line . It should be same . Here in this file it should be 9.
MY CODE IS :-
Procedure Pay_Simulator(lfile_type varchar2,lac_no varchar2,lcur varchar2,lno_item number,ltotal number,ldate date,lpay_purp varchar2,lfile_name varchar2)
IS
v_handle TEXT_IO.file_type;
v_filebuffer varchar2(500);
line_0_date VARCHAR2 (10);
line_0_Purp VARCHAR2 (10);
line_0_count Number;
line_0_sum number(12,2);
line_0_ccy Varchar2(3);
line_9_sum Number(12,2);
line_9_Acc_no Varchar2(12);
Line_1_Sum Number(12,2);
Line_1_tot Number(15,2) := 0;
Line_1_flag Number := 0;
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
LC$String VARCHAR2(50) ;--:= 'one|two|three|four|five|six|seven' ;
LC$Token VARCHAR2(100) ;
i PLS_INTEGER := 2 ;
lfirst_char number;
lvalue Varchar2(100) ;
Begin
v_file := mcb_simulator_pkg.GET_FILENAME(lfile_name); For the file name
v_path :=rtrim(regexp_substr( lfile_name , '.*\\' ),'\'); For the Path
--v_path := SUBSTR (lfile_name,0, INSTR (lfile_name, '\', -1));
Message(lfile_name);
v_handle := TEXT_IO.fopen(lfile_name, 'r');
BEGIN
LOOP
TEXT_IO.get_line (v_handle, v_filebuffer);
lfirst_char := Substr(v_filebuffer,0,1);
--Message('First Char '||lfirst_char);
IF lfirst_char = '0' Then
Loop
LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
Message('VAL - '||LC$Token);
lvalue := LC$Token;
EXIT WHEN LC$Token IS NULL ;
i := i + 1 ;
End Loop;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (9999,'0002','First line should always start with 0');
Forms_DDL('Commit');
raise form_Trigger_failure;
End if ;
TEXT_IO.get_line (v_handle, v_filebuffer);
lfirst_char := Substr(v_filebuffer,0,1);
LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
--Message('Row '||LC$Token);
IF lfirst_char = '9' Then
Null;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (8888,'0016','Second line should start with 9');
Forms_DDL('Commit');
raise form_Trigger_failure;
End IF;
LOOP
TEXT_IO.get_line (v_handle, v_filebuffer);
lfirst_char := Substr(v_filebuffer,0,1);
LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
--Message('Row '||LC$Token);
IF lfirst_char = '1' Then
Null;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (7777,'0022','The third line onward should start with 1');
Forms_DDL('Commit');
raise form_Trigger_failure;
End if;
END LOOP;
--END IF;
END LOOP;
EXCEPTION
When No_Data_Found Then
TEXT_IO.fclose (v_handle);
END;
Exception
When Others Then
Message('Other error');
END;
I am calling the FUNCTION which you gave SPLIT as mcb_simulator_pkg.Split. -
Reading Data from Unix file and write into an Internal table
Dear all,
I am having an requirement of reading data from unix file and write the same into an internal table..how to do that ...experts please help me in this regard.Hi,
do like this
PARAMETERS: p_unix LIKE rlgrap-filename OBLIGATORY.
DATA: v_buffer(2047) TYPE c.
DATA: BEGIN OF i_buffer OCCURS 0,
line(2047) TYPE c,
END OF i_buffer.
* Open the unix file..
OPEN DATASET p_unix FOR INPUT IN TEXT MODE.
<b>IF sy-subrc NE 0.
*** Error Message "Unable to open file.
ELSE.</b>
DO.
CLEAR: v_buffer.
READ DATASET p_unix INTO v_buffer.
IF sy-subrc NE 0.
EXIT.
ENDIF.
MOVE v_buffer TO i_buffer.
APPEND i_buffer.
ENDDO.
ENDIF.
CLOSE DATASET p_unix.
<b>Reward points if it helps,</b>
Satish -
Read data from xml files and populate internal table
Hi.
How to read data from xml files into internal tables?
Can u tell me the classes and methods to read xml data..
Can u explain it with a sample program...<pre>DATA itab_accontextdir TYPE TABLE OF ACCONTEXTDIR.
DATA struct_accontextdir LIKE LINE OF itab_accontextdir.
DATA l_o_error TYPE REF TO cx_root.
DATA: filename type string ,
xmldata type xstring .
DATA: mr TYPE REF TO if_mr_api.
mr = cl_mime_repository_api=>get_api( ).
mr->get( EXPORTING i_url = 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'
IMPORTING e_content = xmldata ).
WRITE xmldata.
TRY.
CALL TRANSFORMATION id
SOURCE XML xmldata
RESULT shiva = itab_accontextdir.
CATCH cx_root INTO l_o_error.
ENDTRY.
LOOP AT itab_accontextdir INTO struct_accontextdir.
WRITE: / struct_accontextdir-context_id,
struct_accontextdir-context_name,
struct_accontextdir-context_type.
NEW-LINE.
ENDLOOP.</pre>
<br/>
Description:
In the above code snippet I am storing the data in an xml file(you know xml is used to store and transport data ) called 'xml_accontextdir.xml' that is uploaded into the MIME repository at path 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'.
The below API is used to read a file in MIME repo and convert it into a string that is stored in ' xmldata'. (This is just a raw data that is got by appending the each line of xml file).
mr = cl_mime_repository_api=>get_api( ).
mr->get( EXPORTING i_url = 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'
IMPORTING e_content = xmldata ).
Once the 'xmldata' string is available we use the tranformation to parse the xml string that we have got from the above API and convert it into the internal table.
<pre>TRY.
CALL TRANSFORMATION id
SOURCE XML xmldata
RESULT shiva = itab_accontextdir.
CATCH cx_root INTO l_o_error.
ENDTRY.</pre>
Here the trasnsformation 'id ' is used to conververt the source xml 'xmldata' to resulting internal table itab_accontextdir, that have same structure as our xml file 'xml_accontextdir.xml'. In the RESULT root of the xml file has to be specified. (In my the root is 'shiva').
Things to be taken care:
One of the major problem that occurs when reading the xml file is 'format not compatible with the internal table' that you are reading into internal table. Iin order to get rid of this issue use one more tranformation to convert the data from the internal table into the xml file.
<pre>TRY.
CALL TRANSFORMATION id
SOURCE shiv = t_internal_tab
RESULT XML xml.
CATCH cx_root INTO l_o_error.
ENDTRY.
WRITE xml.
NEW-LINE.</pre>
<br/>
This is the same transformation that we used above but the differnce is that the SOURCE and RESULT parameters are changed the source is now the internal table and result is *xml *string. Use xml browser that is available with the ABAP workbench to read the xml string displayed with proper indentation. In this way we get the format of xml file to be used that is compatable with the given internal table.
Thank you, Hope this will help you!!!
Edited by: Shiva Prasad L on Jun 15, 2009 7:30 AM
Edited by: Shiva Prasad L on Jun 15, 2009 11:56 AM
Edited by: Shiva Prasad L on Jun 15, 2009 12:06 PM -
Table unable to read data from CSV file
Dear All,
I have created a table which have to read data from external CSV file. The table is giving error if the file is not there at the specified location,but when i put the file at that location there is no error but no rows are returned.
Please suggest what should i do???
Thanks in advance.No version.
No operating system information.
No DDL.
No help is possible.
I want to drive home the point here to the many people that write posts similar to yours.
"My car won't start please tell me why" is insuffiicent information. Perhaps it is out of gas. Perhaps the battery is dead. Perhaps you didn't turn the key in the ignition. -
Failed to read data from report file Reason: The table could not be found.
BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
Failed to read data from report file Reason: The table could not be found.
Any ideas to get around this would really help out.
RegardsConnection used Views, ODBC System DSN is setup properly.
Approach for import from business view manager and import wizard. both methods failed to import the Business View and underlying reports.
I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
However when i try to publish, either from Crystal or Publish wizard i get the same error?
As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
Any help will be surely appreciated. -
To read data from exel file into sap
hi all,
How to read data from exel file into the internal table in abap?
Regards,
sugeet.Hi Sugeet,
Use the following code.
DATA : BEGIN OF tbl_asset occurs 0,
anlkl LIKE anla-anlkl, " Asset Class
bukrs LIKE anla-bukrs, " Company Code
ranl1 LIKE ra02s-ranl1, " Asset #
txt50 LIKE anla-txt50, " Description 1
txa50 LIKE anla-txa50, " Description 2
sernr LIKE anla-sernr, " Serial #
invnr LIKE anla-invnr, " Inventory #
menge LIKE anla-menge, " Quantity
meins LIKE anla-meins, " Base UOM
inken LIKE anla-inken, " Inventory
END OF tbl_asset.
DATA : w_filename TYPE IBIPPARMS-path,
w_file TYPE string.
start-of-selection.
*popup for file path from user
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
IMPORTING
FILE_NAME = w_filename .
MOVE w_filename TO w_file .
* upload data
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = w_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = tbl_asset
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
for HAS_FIELD_SEPARATOR Use
'X': Fields are separated by tabs.
SPACE: Fields are not separated by tabs. In this case, the table must contain only one column or all columns must be contained in the file in their entire length.
Hope it helps...
Lokesh
Pls. reward appropriate points -
Reading data From XML file and setting into ViewObject to Pouplate ADF UI
Hi,
I have following requirement.
I would like to read data from XML file and populate the data in ViewObject so that the data can be displayed in the ADF UI.
Also when user modifies the data in the ADF UI, it should be modified back into to ViewObject.
Here is an example - XML file contains Book Title and Author. I would like to read Book Title and Author from XML file and set it into ViewObject Attribute and then display Book title and Author in ADF UI page. Also when user modifies Book title and Author, I would like to store it back in View Object.
Please help me with this requirement and let me know if any solution exist in ADF, for populating the ADF UI screen fields with external XML file data.
ThanksRead chapter 42 http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/bcadvvo.htm of the fusion developer guide
Section 42.7, "Reading and Writing XML"
Section 42.8, "Using Programmatic View Objects for Alternative Data Sources"
Timo -
Read data from Excel file and diaplay in Webdynpro
Hi all,
I need some help. I have a Excel file with set of name, phonenumbers . I want to know how to display the data using Webdynpro. Could some one help me. help is appreciated and I promise to award points for right answer.
Thank you
Maruti<b>Hi
i can explain you to read data from Excel file
First You have to download the jxl.jar file. You can get this file from the Below site
</b><a href="http://www.andykhan.com/jexcelapi/download.html">jexcelapi jar</a>
It will be in Compressed Fromat So Unzip it to get the Contents
After Unzipping The File You will get a Folder (jexcelapi/jxl.jar)
Now in NWDS open web dynpro explorer, Right Click Your Project, a popup menu will appear and in that click Properties
You will get window displaying your Project Properties
On Left Side of the window You Will Find "Java Build Path"
Click That "Java Build Path" and you will get 4 Tabs Showing ( Source,Projects,Libraries,Order and Export)
Click Libraries Tab
You will find options many options buttons
In that click the Button "Add External Jars"
You will get Window in order to fecth the jxl.jar file from the location you had stored
After selecting the jxl.jar i will get displayed and click ok
Now Open Navigator
Open Your Project
You will find Lib folder
Copy the jxl.jar to that lib folder
Note : You cannot Read the Content from the excel file directly
First You Have to copy that file to the Server,
And from the Server you can get the file absolute path
With the absolute path you can read the contents of the Excel file
You have to save the Excel file as .xls Format and Not as xlsx format i will not accept that...
You have Upload the Excel file from the Server Using the File Upload UI Element
This Coding will extract 3 columns from the Xls File
Coding
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import jxl.Cell;
import jxl.Sheet;
import jxl.Workbook;
import com.sap.fileupload.wdp.IPrivateFileUpload_View;
import com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource;
public void onActionUpload_File(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionUpload_File(ServerEvent)
IPrivateFileUpload_View.IContextElement element1 = wdContext.currentContextElement();
IWDResource resource = element1.getFileResource();
element1.setFileName(resource.getResourceName());
element1.setFileExtension(resource.getResourceType().getFileExtension());
//@@end
public void onActionUpload_File_in_Server(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionUpload_File_in_Server(ServerEvent)
InputStream text=null;
int temp=0;
try
File file = new File(wdContext.currentContextElement().getFileResource().getResourceName().toString());
FileOutputStream op = new FileOutputStream(file);
if(wdContext.currentContextElement().getFileResource()!=null)
text=wdContext.currentContextElement().getFileResource().read(false);
while((temp=text.read())!=-1)
op.write(temp);
op.flush();
op.close();
path = file.getAbsolutePath();
wdComponentAPI.getMessageManager().reportSuccess(path);
catch(Exception e)
e.printStackTrace();
//@@end
public void onActionUpload_Data_into_Table(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionUpload_Data_into_Table(ServerEvent)
try
Workbook wb =Workbook.getWorkbook(new File(path));
Sheet sh = wb.getSheet(0);
//wdComponentAPI.getMessageManager().reportSuccess("Columns = "+sh.getColumns());
//wdComponentAPI.getMessageManager().reportSuccess("Rows = "+sh.getRows());
int columns = sh.getColumns();
int rows = sh.getRows();
int i=0;
for(int j=1;j<=rows;j++)
ele=wdContext.nodeTable_Data().createTable_DataElement();
Cell c1 = sh.getCell(i,j);
ele.setTab_Name(c1.getContents());
Cell c2 = sh.getCell(i+1,j);
ele.setTab_Degree(c2.getContents());
Cell c3 = sh.getCell(i+2,j);
ele.setTab_Percentage(c3.getContents());
wdContext.nodeTable_Data().addElement(ele);
catch(Exception ex)
wdComponentAPI.getMessageManager().reportSuccess(ex.toString());
//@@end
* The following code section can be used for any Java code that is
* not to be visible to other controllers/views or that contains constructs
* currently not supported directly by Web Dynpro (such as inner classes or
* member variables etc.). </p>
* Note: The content of this section is in no way managed/controlled
* by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
String path;
IPrivateFileUpload_View.ITable_DataElement ele;
//@@end
Regards
Chandran S -
Reading data from flat file in aplication server
hi all,
can any body provide code how to read data from flat file which is in application server.
thanks in advancehi,
chk this sample code.
parameters: p_file like rlgrap-filename obligatory
default '/usr/sap/upload.xls'.
types: begin of t_data,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
matnr like vbap-matnr,
werks like vbap-werks,
megne like vbap-zmeng,
end of t_data.
data: it_data type standard table of t_data,
wa_data type t_data.
open dataset p_file for output in text mode encoding default.
if sy-subrc ne 0.
write:/ 'Unable to open file:', p_file.
else.
do.
read dataset p_file into wa_data.
if sy-subrc ne 0.
exit.
else.
append wa_data to it_data.
endif.
enddo.
close dataset p_file.
endif.
Rgds
Anver -
How to read data from a file in OSB
hi guys,
Recently, I've got a problem with reading file from specific location. I've actually followed this post OSB 11g - Read or Poll File in OSB - Oracle Fusion Middleware Blog, and then
I know how to read a file. However, it does not as expected. Because, I've found no way to read data from the file. Therefore, no chance to manipulate the data like assigning to a variable, or extracting ....
Hence, is there any way to read data from file by using proxy service in OSB ??? No Java code ???
by the way, supposed that there is no way to read data from a file in OSB. So, What purposes will the way in the post above be used for?
Many thanks in advancehttp://jakarta.apache.org/poi/hssf/index.html
HSSF stands for Horrible Spreadsheet Format, but it still works! -
How to read data from a file that was formatted by excel?
Hi everyone, I'm familiar with java.io and the ability to read from files, can anyone tell me how to read data from a file that was formatted by excel? Or at least give me some web references so that I can learn about it?
http://jakarta.apache.org/poi/hssf/index.html
HSSF stands for Horrible Spreadsheet Format, but it still works! -
How read data from *.LB File in LabVIEW?
Hi dear specialist,
How I can read data from *.LB File in LabVIEW?
Thanks` HovoThanks Ben, but when I open it as datalog file` comes following error:
Error 71 occurred at Open/Create/Replace Datalog in Simple Temp Datalog Reader.vi
Error 71 occurred at Open/Create/Replace Datalog in Simple Temp Datalog Reader.vi
Possible reason(s):
LabVIEW: File datalog type conflict.
C:\Documents and Settings\Home\Desktop\a.lb
Here is an example of lb file (a.lb), and here is a VI for read datalog file(Simple Temp Datalog Reader.vi)
What means this error?
How I can read a byte at a time?
Attachments:
testForLB.zip 101 KB -
i need a procedure that reads data from xml file and stores into an oracle table.
Hi,
Check the below links:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:27523665852829
http://www.experts-exchange.com/Database/Oracle/Q_20932242.html
Best regards,
Rafi.
http://rafioracledba.blogspot.com -
TIFF-VIs for reading/writing from/to files
To whom it may concern,
I'm looking for TIFF-VIs for reading/writing from/to files
for Labview 6 without any add-on package.
Unfortunately I can't use TiffRd04 and TiffSv05 from
Koji Ohashi due to the different file format!
Any hints?
Thank you in advance. Best regards from Germany
Udo WeikHi Udo,
did you check these TIFF related libraries? .. maybe one of them is working.
Good Luck
Maybe you are looking for
-
IPod Touch 5th Gen. on the Fritz?
I just recently bought an iPod Touch 5th Generation and I've only had it roughly four months.. I bought it from Walmart (and the receipt has disappeared, making this problem even worse). Anyhow, I haven't dropped it, I've made sure to keep all liquid
-
I lost facetime. how do I get it back
My wife somehow lost the Facetime app off her phone. I don't see it in the app store. How do I restore it?
-
Create a tree node and show the report on the same page
Hi, I have created a tree for our organization and each node represents a unit. The top one is office level and followed by division and brach. I have created a reprot on the same page as the tree node. What I want to do is: I would like to click a s
-
How to get 5.1 (surround) in desktop and normal music apps
hi, for a while ive been trying to get sound from all my speakers in my 5.1 setup not just front... ive got an xfi xtremegamer and alsa does recognize all channels but independently, in phonon i can choose whether to use front/side/center/rear but no
-
I am attempting to setup Toplink Cache synchronization using oracle.toplink.remote.rmi.RMIJNDIClusteringService in a clustered environment When I launch my server and perform operations I see messages as follows Announcement sent from 5ff7180-10598c5