Dynamic label button

Hi to all,
can someone of you have a button with dinamic label?
For example i've to copy some data back to previous calling form.
So i would like to have a button with a label like this:
copy to 'NAME || SURNAME'
That link back to previous page.
If not clear please write me.
thanx

on the button label
try
copy to &NAME. &SURNAME.
(if NAME and SURNAME are page items )
or create hidden items to hold that information
Hope it helps Aris
.

Similar Messages

Dynamic labelling the buttons

Hi,
I have 10 departments and every department has different number of sub-departments.
Users will select a particular department to run a report showing summary of the department
and tabs or buttons for all the subdepartments available under that department.
By clicking the button or tab for a subdepartment, the user would see updatable tabular
form for that subdepartment.
One solution is to create pre-labelled buttons for all sub-departments on the summary report and hide/show
them basing on the department selection. Means, if the user selects department 1 it shows button 1 to 5 and if selects department 2 then button 6 to 12 etc.
Can anybody suggest a better solution for this?
Thanks,
Zahid

report showing summary of the department and tabs or buttons for all the subdepartments available under that departmentAre these buttons shown within the report's colums ? In this case it should be quite simple since you can use the column link feature and choose the link txt as some data column and style the button using some class definition(so that it look like a button, for example apex's link button template classes).
If you are using tabs, how are you generating them - PLSQL Dynamic region ?
If so , submit the page and get the PLSQL region's source to generate the content.
By clicking the button or tab for a subdepartment, the user would see updatable tabular form for that subdepartment.From this I guess a submit would b simpler coz you need to reload this Tabulat form too
<li>Another option would be to use Dynamic action to upon report refresh that
1. fetches the button or tab label sing an Ajax callback function and assign the label appropriately
2. Refreshes the Tabular form for the department

Dynamically labeling a button

Hello again.
In AS 2.0, I used to be able to make a single movie clip that I could re-use over and over again as a button. Each instance of this button would then be dynamically labeled at runtime based on some code using onClipEvent(load) and textFormat. I tried to so something similar using actionscript 3.0 and came up against some problems. Could anybody tell what I am doing wrong?
The button is instance named "lgndOneBedroom_mc" and this is the code on the root timeline:
import flash.display.Sprite;
import flash.text.TextField;
import flash.text.TextFieldAutoSize;
import flash.text.TextFormat;
lgndOneBedroom_mc.buttonMode = true;
lgndOneBedroom_mc.buttonTextField.text = "One Bedroom";
Then, in the button movie clip I have a dynamic text field instance named "buttonTextField" and the following code on the actions layer:
myTextFormat = new TextFormat()
buttonTextField.setTextFormat(myTextFormat);
Thanks everyone.

Hey, I'm pretty sure its a minor error with either the name or the text field, but here's a completely dynamic piece where even the text field is created by action script so u don't need anything on the stage, just use the label.x and label.y to place it where you want, hope this helps;
var label:TextField;
function TextFormat() {
            configureLabel();
            setLabel("Hello ");
function setLabel(str:String):void {
            label.text = str;
function configureLabel():void {
            label = new TextField();
            label.autoSize = TextFieldAutoSize.LEFT;
            label.background = true;
            label.border = true;
            var format:TextFormat = new TextFormat();
            format.font = "Verdana";
            format.color = 0xFF0000;
            format.size = 10;
            format.underline = true;
            label.defaultTextFormat = format;
            addChild(label);
            //label.x = where?
            //label.y = where?
TextFormat() ;

Dynamic radio button and group

Hi, we have create dynamic radio button and group on “application creation complete” event , but which I am try to get number of radio button its show zero, see below code
import flash.utils.setTimeout;
import mx.controls.Alert;
import mx.events.FlexEvent;
import spark.components.RadioButton;
import spark.components.RadioButtonGroup;
private var rbg:RadioButtonGroup;
private var rb1:RadioButton;
private var rb2:RadioButton;
private var dcount:int = 0;
protected function application1_creationCompleteHandler(event:FlexEvent):void
     // TODO Auto-generated method stub
     // TODO Auto-generated method stub
     rb1 = new RadioButton();
     rb2 = new RadioButton();
     rbg = new RadioButtonGroup();
     rb1.label = "Radio1";
     rb2.label = "Radio2";
     rb1.group = rbg;
     rb2.group = rbg;
     vbox1.addChild(rb1);
     vbox1.addChild(rb2);
     checkRadioButton ();
protected function checkRadioButton ():void
     Alert.show("In checkRadioButton function : " + rb1.group.numRadioButtons.toString());
If I put some Time interval to call checkRadioButton function its working fine,
//checkRadioButton ();
setTimeout(checkRadioButton,1000);
but this is not best practice.
why this happen ….can anybody clear this or any other way to do this.
Thanks in advance

@manjeet.patel,
Just write the below line of code
vbox1.validateNow();
You need not use setTimeout() function
vbox1.addChild(rb1);
vbox1.addChild(rb2);
vbox1.validateNow();
Thanks,
Bhasker

Dynamic Submit Button- Required Fields

I needed a dynamic submit button that would cc a field from the form. I found the following script and it works great, but it doesn't give an error message if someone didn't fill in a required field like a regular submit button would. Is it possible to use the script below but to check for required fields?
// This is the form return e-mail. Its hardcoded
// so that the form is always returned to the same address
// Change address on your form
var cToAddr = "[email protected]";
// First, get the client CC e-mail address
var cCCAddr = RegionalDirector;
// Set the subject and body text for the e-mail message
var cSubLine = "909 Camp Visitation Report-" + xfa.resolveNode("#subform[0].#subform[7].Country"); var cBody = "Thank you for submitting your 909 report.\n" + "Save a copy for your records";
// Send the form data as an FDF attachment on an e-mail
event.target.mailDoc({
          bUI: true,
          cTo: cToAddr,
          cCc: cCCAddr,
          cSubject: cSubLine,
          cMsg: cBody

Hi,
stefan's example uses a method that seems a bit clumsy or maybe that was the only way it could be done in 2006. Assuming your email button is called EmailSubmitButton yo can use;
EmailSubmitButton.event__click.submit.target = emailtarget;
where emailtarget is a string in this format
mailto:emailaddress?cc=emailaddress?bcc=emailaddress?subjext=text?body=text
The bold parts you can't change but you can leave out, except for the mailto and the to email address that follows it.
Regards
Bruce

How do I get "custom label" button back on Contacts

I used to have "custom label" button for phone number tags on contact list. It is now gone. Any way to get it back. This started on my iPhone 4 and remains on my iPhone 5.
SOLUTION FOUND !!!
Go into settings and do this:
Settings --> Mail,Contacts,Calendars --> Default account (for Contacts)--> select "On My Phone"
this restored the custom labels button when creating new contacts. Somehow it was set to 'Hotmail" and i guess Hotmail does not support customized labels so it isn't offered when creating new contacts.

That is what i a talking about. When i go to add a new contact and go to edit the label - the generic list of number types is present but the additional list of custom lables is not present - nor the button to create a new one. Some of my contacts do have the custom label present - old contacts created back when the buttons and label types were all there but it is no longer present when creating new contacts or editing contacts that were recently added.

Dynamic Selection Button issue

Hi All,
I am working on a ZReport which has a requirement to be added with a dynamic selection button. This Button should be same as AR01 transaction.
I have added the ADA logical database and also the NODES inside the program. I got the button on selection screen of ZReport.
But its not behaving as required. Suppose I am selecting the Time-Dependent Data -> Tax Jurisdiction as 'NZ'. Then the report has to selection only for NZ(Newz ealand). But in my report it is not even pickingup this value (NZ) and it returns for all the countries.
I tried to debug but couldnt find anything. How can I track this field?
Can you please tell me how can I fix this issue.
Thanks.

don't forget to put a GET event for each node used in dynamic selections
and inside this event, put statement: CHECK SELECT-OPTIONS.

Dynamic selection button on report RCATS_APPROVE_ACTIVITIES

Hi,
I made a copy of the program RCATS_APPROVE_ACTIVITIES with all its components, and the dynamic selection button on the selection screen doesn't work like the standard.
In my researches, I found that the dynamic selection that the standard program uses is associated to the logical database 'PNP', but the logical database that the programs uses is 'PNPCE', and that's the dynamic selection that my program copy is showing.
Does any one have an idea how this happens and how to solve?
Thanks.
Sónia

Hi Sonia,
You program is using dynamic selection screen which actually is the selection screen of your logical database. You can see that thru tcode SE36-> PNP->click on selection check box. You will see the code of selection screen. This selection screen is called in standard program and since you have copied the standard program, your program is also showing the same selection screen. LDB can be called in standard program thru Function module LDB_PROCESS.
In case you want to remove some of the selection screen fields of LDB from your report, you can do so in the
'at selection-screen output' event by looping at the selection screen variables and stopping unwanted fields from display.
You need to check the group name and the field name of the fields you want to disable and use it in the below code accordingly.
e.g.
at selection-screen output.
loop at screen.
if screen-group2 = 'DBS'.
screen-active = 0.
screen-invisible = 1.
endif.
modify screen.
endloop.
Cheers,
Vikram
Please reward for the helpful replies!!

Dynamic LOV buttons in Forms

Hello:
The dynamic LOV button (app.ui.lovButtons=true) in Registry.dat setup is showing the LOV button in NORMAT Mode ONLY.
This does NOT get displayed when the form is in QUERY mode. Is there a way to display the LOV buttons irrespective of Query/Normal Mode?
Thanks
Bala

Anyone faced this issue before?
Please help
Edited by: kart on Jun 16, 2010 3:58 PM
Edited by: kart on Jun 17, 2010 12:30 PM

Dynamic Email Button

Hi Everyone
I know how to setup a Dynamic Email button which will format the Body of the Email using \n and some of the others like \t and \r but are there others? Is there a way to control the font size, color, or alignment like centering? Thank you in advance.

I tried that but it is interesting that if I create a new message in outlook it is in a format of
html and if I use the email button in the pdf it creates it in plain text which just displays the text in this format.
<html>/n/n/n<body>/n /n <center>Center</center>/n /n </body>/n </html>/n
Any suggestions?
the control used to open outlook and attach is
this.mailDoc({bUI: true, cTo: cToAddr, cCc: cCCAddr,
cSubject: cSubLine, cMsg: cBody});

Dynamic link button from speed grade to premiere is grey.

Dynamic Link button from Speedgrade to Premier is grey. No problems Linking from Premier to SG, but no way to send the project back to Premier. The project is in Apple ProRes 4444. I have a Mac Pro last generation. Thanks for an urgent help!

Well... I have done everything you advice first SG, but it didn't work, so I have cleaned the whole CC, erasing any possible trace of it from my computer, then I have gone through the Cleaner Tool and reinstalled brand new the whole thing.
My builds now:
PrPro: 8.2.0(65)
SpeedGrade: 8.2x51
Exactly the same. Obviously, troubleshooting.
For what I understand, according to your comment, is that I ave to match the builds, which would mean either to low down PP to 51 or up SG to 65... Is ti that or am I getting crazy?
But how the hell to do it?
I have a 2 hours film with a 1 month grading work on it stuck in SG... Aaaaahhhhh!
(Oh, the good old times of FCP 7 and Color... NEVER A PROBLEM)
Best,
Luis

Color Label Buttons - Unexpected Behavior

I have had two issues with the color label buttons on the toolbar in LR3:
- When a custom filter is being used and then one of the color buttons is pressed to change the color, the resulting color is not the selected color. For example, if the "green" button is pressed, the color changes to "red".
- Have also noticed that under certain circumstances, just hovering the mouse over the "red" button causes the color to change without actually pressing the button. So if a custom filter is being used (filter by color), just passing the mouse over the "red' button causes the image to disappear.

- set filters to off using the drop-down list on the right side of the filmstrip
- folder has 6 images in it
- mark 2 as flagged
- mark same 2 as color yellow
- select to filter by color yellow using the filter buttons on the filmstrip
- go into loupe view on the first image
- click the green color button on the toolbar
- have gotten 2 results repeating this:
1. in some cases the image turns green
2. in some cases removes the color yellow and turns the 2nd image green (all with just one click on the first image)
For the issue with hovering over the red button, I have not been able to repeat this today. I will continue to look for the specific conditions that caused this.
System Info
Lightroom version: 3.0 [677000]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7600]
Application architecture: x86
System architecture: x86
Physical processor count: 2
Processor speed: 1.9 GHz
Built-in memory: 3070.9 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 628.7 MB (87.7%)
Virtual memory used by Lightroom: 686.1 MB
Memory cache size: 60.4 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1200, 2) 1920x1200

Dynamic radio button in web dynpro abao

Hi expert,
I want to dynamic radio button by web dynpro abap .
Kindly give me a soulation ASAP.
Thanks and regard's
Vikash

hi,
method wddomodifyview .
if first_time eq abap_true.
data: LR_CONTAINER         type ref to CL_WD_UIELEMENT_CONTAINER,
      LR_RADIOBUTTON1            type ref to CL_WD_RADIOBUTTON,
      LR_RADIOBUTTON2            type ref to CL_WD_RADIOBUTTON,
      LR_FLOW_DATA         type ref to CL_WD_FLOW_DATA.
" bind text property will give TEXT that appears next to Radio Button
CALL METHOD cl_wd_radiobutton=>new_radiobutton
EXPORTING
   bind_selected_key   = '01'
   BIND_TEXT           = 'saurav'
receiving
    control             = LR_RADIOBUTTON1.
" bind text property will give TEXT that appears next to Radio Button
CALL METHOD cl_wd_radiobutton=>new_radiobutton
EXPORTING
    bind_selected_key   = '02'
   BIND_TEXT           = 'mago'
receiving
    control             = LR_RADIOBUTTON2.
LR_FLOW_DATA        = CL_WD_FLOW_DATA=>NEW_FLOW_DATA( element = LR_RADIOBUTTON1 ).
LR_FLOW_DATA        = CL_WD_FLOW_DATA=>NEW_FLOW_DATA( element = LR_RADIOBUTTON2 ).
LR_CONTAINER ?= view->GET_ELEMENT( 'ROOTUIELEMENTCONTAINER' ).
LR_CONTAINER->ADD_CHILD( LR_RADIOBUTTON1 ).
LR_CONTAINER->ADD_CHILD( LR_RADIOBUTTON2 ).
endif.
endmethod.
Thanx.

Dynamic label in qml

How to add dynamic label in qml

I am not familar with this , but I think you might want to take a look in the developer forums. I see some stuff on this subject..
http://supportforums.blackberry.com/t5/10K-Developer-Commitment/dynamically-change-label-text-QML/td...

Unicode in Labels, Buttons,...

Hi, I want to use unicode in my applet. I know that I can use unicode characters
by drawString() method of Graphics class but I want to use unicode characters
in Label, Button,... components.
I tried to use bellow command to show \ufe78 th character of unicode but it doesn't work!
label1.setText(" "+'\ufe78');
Is there any way to do that?
thanks in advance!
naser

I thinc you just need to edit (or delete) section "Exclusion Range info" of "font.properties" file in "jre\lib". 
by befault, the Exclusion Range is: 

exclusion.dialog.0=0100-0400,0460-ffff 
exclusion.dialoginput.0=0100-0400,0460-ffff 
exclusion.serif.0=0100-0400,0460-ffff 
exclusion.sansserif.0=0100-0400,0460-ffff 
exclusion.monospaced.0=0100-0400,0460-ffff 

So, character with code "fe78" will newer displayed in AWT or SWING component.

Dynamic label button

Similar Messages

Maybe you are looking for