Dynamic labeling issue

Hello there! Here is the problem.
When I am giving a label the name which generates from some code I can't see it in design view.
Only {bracketed} expressions appears, which can mess with design appearance (overlapping) so it's no longer comfortable to work with.
To see the actual values I need to build the project. Any suggestions?

Hi,
Why not set the label width so that it doesn't overlap. binding is a runtime thing so unless you want to programatically set binding and just have text in the label at design time (a lot of work for nothing really) the best option is to set the label dimensions.
David.

Similar Messages

Slow program response, crashes when creating titles and dynamic link issues

Dear reader,
I am now trialling Adobe CC OSX with Premiere Pro and After Effects before deciding to subscribe but I am experiencing a lot of issues while working.
I am now working on an animation, but editing raw mxf files also gives crashes and slow responses/ program refreshes.
1) Slow mouse response
2) Slow program refresh while key framing visuals
3) Rendering in PP is extremely slow when AE is open in the background, when closing AE and re-initiate the render in PP it renders super fast
4) Crashes. When I overlay titles in my time line PP regularly crashes
5) Dynamic Link issues when working combined in AE and PP where file connections in the time line get lost when the AE project has too many sequences
I am curious to find out if other people are also experiencing these issues.
I am indecisive in getting the paid yearly plan or move to FCPX instead? Or should I get a new MacPro and is this model too old?
It worked fine 2 months ago, however I was still working on FCP7. After updating it is really bad working with it...
My system consist of:
MacPro mid-2010
OSX 10.9.5 (13F34) (new installation)
2x2,66Ghz 6-core Intel Xeon
24GB DDR3 ECC
Nvidia Quadro K5000, 4GB
2x PCIe SSD 1TB
2x HDD 3TB
2x HDD 2TB
Feedback is much appreciated! Best regards, Alexander

this does work for basic colour correction but not when trying to grade an entire suqence to achieve a specific style, applying a vingette or certain effects have to be done in after effects.
I want to try and get my whole sequence into after effects but preserve the edits and effects added in permier pro, is there any way to do this?
rich

Dynamic label in qml

How to add dynamic label in qml

I am not familar with this , but I think you might want to take a look in the developer forums. I see some stuff on this subject..
http://supportforums.blackberry.com/t5/10K-Developer-Commitment/dynamically-change-label-text-QML/td...

Configuring a Static WCF Port to Behave as a Dynamic Port Issue

I have WCF-Basich send port and i have developed a custom pipeline where i am resetting the "BTS.OutboundTransportLocation" based
on the input message received .So, for different message , i am setting the different value to the "OutboundTransportLocation"
by writing in context and hence making my wcf basic send port dynamic.
Issue : it seems value of "OutboundTransportlocation" is not resetting properly and using the old value set during first time.For
e.g. if first time i reset the correct url in the outboundtransport location and if second time if i set the wrong url/different url, it takes the previous url while sending the message.However,All
logging (BTS HAT and such) all seem to indicate all works fine.
Only after restarting the host it takes the latest one or correct one .It seems
"WCF BasicSend port is using caching and does not react well to changing in url's 'in flight'.
What is the solution for this ?
Manish

Hi Manish,
Please set IsDynamic property to true in your custom code. :) :) :)
Regards,
Parashu.
parashuram

How to provide dynamic labels for calculated columns in HANA calc views

Hi all,
we have the requirement to provide dynamic labels for some calculated columns in our calculation view - how to do that?
Thanks and kind regards,
Alexander

Calculated Columns can only generate a value from fields of the current item. And only some types of fields (for example, it can't use a lookup column).
Consider using a workflow to accomplish your goal.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Dynamic Labels with Datepicker..

Hiya folks,
I need to have a dynamic label for a page item, and am coming up lacking....
Here is the situation:
APEX 4.0, running on Oracle 10g..
I have a datepicker control (item is a due date). I am using a hidden item to store the label and I setup the value of this item when it is displayed via a simple sql select.
If the due date is PAST the system date, then I set the label to Item Is Past Due.
If the item due date is within 7 days of the system date I change the label to Item Due within 7 Days.
If none of these are true then I set the label to Due Date.
However, if the user changes the date via the datepicker, I need to have the label updated (and the the hidden item) to show the change (or not).
I tried a dynamic action on the datepicker, but it did not seem to fire on a change event always, and would NOT refresh the label with the new value.
Do I need to submit the page to get the label to update?
Thank you,
Tony Miller
LuvMuffin Software

Hello Tony,
>> I am using a hidden item to store the label and I setup the value of this item when it is displayed via a simple sql select.
If you need to refresh a page item, without submitting the page, based on a result of a SQL query, it seems that your only option is to use AJAX (as the SQL can only run on the server side, and you don’t want to submit the page).
The old, but still good, fashion way is to define an onchange event on the Datepicker item. This event is fired every time a changed value is passed from the Datepicker into the input field of the item. Simple and effective.
I’m no expert in Dynamic Actions but I can tell you that if you set the When Event to Change it is fired when the Datepicker changes the current date. With the Action option of Execute JavaScript Code you can probably also trigger an AJAX process.
>> Do I need to submit the page to get the label to update?
No. You can use AJAX, either directly or through DA.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Crystal Report Dynamic connection issue ORA-04043 Database Vendor Code 4043

HI All,
Ii am getting dynamic connection issue with Crystal Report 2008 and Business View Manager, i have Oracle database,
i have done following steps
1 Creating Dynamic Connection (including two connection XDC & YDC)
2. Creating Data Foundation (Common object available in both connection ie. stored procedure)
3. Creating Business View (with selected number of elements in business element, like firsta name, lastname)
I have verified database connectivity from Business view manager, both the connection are working fine bringing different number of rows from two different schemas (different schema but same objects in two schemas)
4. Database connectivity to different database schemas
5. Connectivity from Crystal Report (done the connectivity from the repository to business view )
6. Report Connectivity with first schema shows records
7 Report Connectivity with second schemas shows error
as follows Failed to retrive data from the database & on clicking of detail i get following error
Crystal Reports
Database Connector Error: 'ORA-04043: object HR.EXCEPTION_REPORT_SUB1_PROC [Database Vendor Code: 4043 ]'
Q first of all i need to know if dynamic connection using business view manager and crystal report technically possible or not, if yes then please let me know the solution, since we did verified with SQL database and ite work with two different database.
Q if not possible then are there any options to resolve dynamic deployment of crystal report over multiple schemas with crystal report 2008
Any help or suggestion will be appriciated, hope some one might have got similar issue
Thanks in advance
Edited by: smunir on Jul 12, 2011 9:18 AM
Edited by: smunir on Jul 12, 2011 9:41 AM
Edited by: smunir on Jul 12, 2011 9:43 AM

Hi,
When i use same credentials in Tod or sqlplus it works perfect and gives appropriate results. But when i use same credentials using business view manager, the very first connection works but the second connection does not work
Please suggest!
Regards,
<<smunir>>

Retain call info using dynamic label

Hi
Im using dynamic labels together with vxml app so depending on what e164 number the fromExtvxml variables is populated with the dynamic label diales to these extensions. Only problem with this as you all may know is that after label node in a dynamic label the script cannot continue. As i also need to have queuing if the dialed out phones do not answer. How could this be accomplished? Is there any way to use last label to be a dialednumber plan pattern or something else? I could for some smaller customers use a separate dnis / script for queuing but it will not fit all needs in the long run.
Sent from Cisco Technical Support Android App

I solved it. It works perfectly fine to do queuing after a dynamic label. Dont know why others says it does not work
Sent from Cisco Technical Support Android App

ICM dynamic label transfer

For UCCE 8.X can anyone share info on how exactly a transfer happens using dynamic label. We are transferring out to 800 no and somehow the calls sent out are not matching what is being received at the other end.

The call is routed back to the routing client i.e. CVP or CUCM (wherever call arrived from) and follows dial-plan configured on the routing client i.e. CUCM Route pattern in matching partition or if CVP is involved either CUSP/CUPS/CVP dial-plan. If you are doing REFER transfer with CVP then the call gets routed back to the originating device i.e. ingress GW and a dial-peer is matched.
Chris

Dynamically labeling a button

Hello again.
In AS 2.0, I used to be able to make a single movie clip that I could re-use over and over again as a button. Each instance of this button would then be dynamically labeled at runtime based on some code using onClipEvent(load) and textFormat. I tried to so something similar using actionscript 3.0 and came up against some problems. Could anybody tell what I am doing wrong?
The button is instance named "lgndOneBedroom_mc" and this is the code on the root timeline:
import flash.display.Sprite;
import flash.text.TextField;
import flash.text.TextFieldAutoSize;
import flash.text.TextFormat;
lgndOneBedroom_mc.buttonMode = true;
lgndOneBedroom_mc.buttonTextField.text = "One Bedroom";
Then, in the button movie clip I have a dynamic text field instance named "buttonTextField" and the following code on the actions layer:
myTextFormat = new TextFormat()
buttonTextField.setTextFormat(myTextFormat);
Thanks everyone.

Hey, I'm pretty sure its a minor error with either the name or the text field, but here's a completely dynamic piece where even the text field is created by action script so u don't need anything on the stage, just use the label.x and label.y to place it where you want, hope this helps;
var label:TextField;
function TextFormat() {
            configureLabel();
            setLabel("Hello ");
function setLabel(str:String):void {
            label.text = str;
function configureLabel():void {
            label = new TextField();
            label.autoSize = TextFieldAutoSize.LEFT;
            label.background = true;
            label.border = true;
            var format:TextFormat = new TextFormat();
            format.font = "Verdana";
            format.color = 0xFF0000;
            format.size = 10;
            format.underline = true;
            label.defaultTextFormat = format;
            addChild(label);
            //label.x = where?
            //label.y = where?
TextFormat() ;

Embedded Fonts on Dynamic Label Component

I am working on a project that calls for multiple label
components to be dynamically rendered based on a selected comboBox
selectedItem. The comboBox is a choice of fonts available to the
user - all of which are embedded fonts. For some reason, the fonts
are not embedding correctly for systems that do not have the font
on the system.
I have added the fonts to the library and selected "Export to
ActionScript" as well as "Export in First Frame" (although I want
to preload these later once this issue is resolved). In my steps to
simplify and solve, I created a basic movie with a label on the
stage with an instance name of "label0".
In my Actions frame, I use the following code:
label0.text = "This is a font test";
label0.setStyle("fontFamily", "Vivaldi");
label0.setStyle("fontSize", "40");
label0.setStyle("embedFonts", "true");
I have seen examples on the web where someone uses
label0.embedFonts = true; but that doesn't seem to work either. I
have also tried various fonts to verify the font will embed.
Thinking I may not be embedding it correctly, I checked the
bandwidth profiler and variables list and the size goes up after I
try to embed the font as well as the label0 variables correctly
show embedFonts = true as well as the fontFamily is set to Vivaldi
(sample).
Many people have used Dynamic Text Fields but I need to use a
Label so I can use the autoSize feature as users are allowed to
choose their own font size (between 10pt and 40pt). The label
component seems to be the right option for me with the exception of
the font selection. To be safe, I added a dynamic text field and
embedded the fonts there as well and hid it off stage. When viewing
it on another system, the dynamic text field worked (poorly) but it
showed the font. The label did not show the correct font.
Any help would be greatly appreciated.
Thanks

Yes, when I set label0.setStyle("fontSize", "40"); the size
changes for both systems (the one that has the font installed as
well as the one that doesn't). On the system that doesn't have the
font, it appears as a Times New Roman font in large type.
Reference:
Using
styles with the Label component (Adobe Live Docs)

Dynamic Labels/Headings/Titles in report

I have a situation, we have one table containing these columns.
CREATE TABLE REP_LABELS ( LBL_ID NUMBER, LBL_DESC_EN VARCHAR2(200), LBL_DESC_AR VARCHAR2(200) );
It contains data for Report Labels/Headings/Titles in English and Arabic so we can use one report to manipulate both languages at a time. Our data for Report is also coming dynamically according to current selected language. only issue we are facing is headings and labels for items in the report.
now my report contains 20 labels, and i don't want to create 20 formula items in report to use them in boiler_text or text_field, is there any other way i can dynamically display the headings according to the report language (i already have parameter for language and also have function which returns the label through language_parameter and lbl_id).

Hi
Have you solved this issue?
I have the same problem.
Can you help me?
Thanks in advanced

Dynamic Label change the Text depending of the locale

Hi,
I have create a dynamic UI (some InputFields with Labels). The development is in American English. I have create resource name in the xlf-Files. For American English and for German. I set the text of the label by the dynamic creation of the label.
If I try to get the label texts in english I get always the text of the creation one but not the german one. The other texts of the UI-elements are right, which I have translate to german.
It looks like that it is not possible to create UI-Labels for international using.
Any idea.
regards
Gunter

hi Werner,
you try in this pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/internationalization%20of%20web%20dynpro%20applications.pdf
Regards,
vino

Fetching Dynamic Object issue

Hi all,
Instead of define an variable as external (due to size limitation), I decided to use session.getInstanceData to obtain the value in an instance variable. While things works well on my environment, it does not work out in the QA environment. The following is how I do it:
DynamicObject instanceData =
session.getInstanceData(instanceInfo.getId());
Map dataMap = instanceData.asMap();
//Get screening result
String resultStr = "";
boolean hasResult =
dataMap.containsKey("screeningResults");
if (hasResult){
Object resultValue =
dataMap.get("screeningResults");
resultStr = resultValue.toString();
I have also log the content of screen result inside the activity:
logMessage("leaving ... "+this.activity.name +" with screening results="+ this.screeningResults);
At my environment, I can see the content pass from the engine back to PAPI. However, on QA environment, I see the content show on the engine log (due to the logMessage) but PAPI gets empty string back.
At first I thought it is due to the "Max Instnace Size limitation", so I upped the limit to 2000kb, but it still doesn't solve the issue. So anyone got any idea what did I do wrong or forgot to handle? Thanks!
Matthew

Can I create dynamic object?Depends what you mean by "dynamic object." That term is not part of standard Java parlance, AFAIK.

ADF Table dynamic rendering issue with Transient VO

Hello All,
JDeveloper : Studio Edition Version 11.1.1.2.0 Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
ADF Business Components     11.1.1.55.36
Java(TM) Platform     1.6.0_11
Oracle IDE     11.1.1.2.36.55.36
SOA Composite Editor     11.1.1.2.0.12.16
Versioning Support     11.1.1.2.36.55.36
My page header and lines section. Header section is designed using af:panelFormLayout and lines section is constructed using af:table. Header and Lines regions are on two different Transient VOs which has no queries and updatable option in all the attributes set to always. As per the requirement after some condition, i will have to disable few column items in the lines table. For this, i have created new Transient attribute (SpecEditMode) of type Boolean in lines transient VO and i set this attribute value to Boolean.TRUE or Boolean.FALSE based on the condition. I set read only property to all af:inputText fields as #{bindings.SpecEditMode.inputValue}.
Here is the my lines table layout structure
af:panelBox
     -> af:panelCollection
     ->-> af:table.
I have one input text box to get number of rows to be added to line in the af:panelBox toolbar and a GO button to create the rows.     Here is the steps to get my issue
1. Create new rows in the Lines Transient VO based on the user input.
2. Perform business logic and lock the rows created above (set the read only propery to true using expression #{bindings.SpecEditMode.inputValue})
3. Rows created in step one gets locked when the layout gets refreshed.
4. Repeat the step 1 and now all the locked rows becomes unlocked.
To debug further on this, i drag and drop the SpecEditMode attribute as a column in the same table to verify the values during runtime. SpecEditMode attribute value for Rows created in step 1 are true which is supposed to lock the row.[But not locked the rows] and for all the newly created rows in step 4 are false.
Eventhough the SpecEditMode attribute values are correct, the fields are not locked after the first time.
Could you let me know if i am missing anything? Very much appreicate any pointers/inputs. Kindly suggest if there is any other better way to achieve the expected functionality.
Thanks
Annadurai.

When i set the read only property to #{row.bindings.SpecEditMode.inputValue}, the dynamic behaviour is works just fine.

Dynamic labeling issue

Similar Messages

Maybe you are looking for