Dynamic Link between Premire Pro and AE not working

I've been having this issue where dynamic link is grayed out in the Premiere Pro menu, when i try to link a clip to AE. It's the same the other way round (i.e. AE to Premiere), and also the "Replace with After Effects Comp" is grayed out as well. Im using the CC version (Not CC 2014), so it should work?
Thanks for your help!

Hi Kevin,
Thanks for your reply. I'm using CS6 (if that's what you mean by version - otherwise I think it's 7.0). I've never come across verifying the programs, how do I go about it?
Thanks

Similar Messages

Dynamic Link between Premiere Pro and Premier Pro when importing sequences?

Let me explain what we're trying to do. In our office we have one gentleman who edits together multiple program segments for a broadcast television show we do. He creates a new project and sequence for each because we upload the segments separately for the web. My job is to edit together the entire show for television. So what I do is I import his sequences to PP. The reason I do a sequence instead of a rendered video is for I can go in an make any corrections. But if I do make corrections it only makes the corrections on my project and not the original project/sequence I imported. I would like for the changes to also appear on on the original. Is there away to do this? I know this works for Adobe After Affects, Adobe Photoshop and now SpeedGrade using Dynamic Link, but is there a way to do something similar between Premiere Pro projects or sequences? Thank you

To my knowledge there is no way to use Dynamic Link between PP on two different machines. The DL is for using PP on a single machine such as importing AE comps, PSD files, etc.
I understand what you are trying to do and it sounds like Adobe Anywhere would be what you would need. Editor "1" can make a project and edit a sequence...editor "2" can access the same project and sequence, make changes,and it will update back on editor "2" machine.
To do what you want without Adobe anywhere, and still retain the original sequence you might want to try this.
After you import the project file/sequences from the other editor, make your chances, master cut(s). Then have the other editor import your updated sequences.
Check this out http://www.adobe.com/products/adobeanywhere.html

Dynamic link between Premiere pro and After effects versions?

I was wondering if it was possible to use the dynamic link between different version of the products like preimere pro cs5.5 and after effects cs5.0, I downloaded the trial of premiere cs5.5 while I already have bought and installed after effects 5.0 a while ago. when I tried using dynamic link with premiere 5.5 with my current after effects cs5, the "replace with after effects composition" in premiere was greyed out. I didnt know if this was just a limitation of the trial, or if the two different versions (PR cs5.5 with AE cs5) were incompatable with dynamic link. hope you guys understand the question, and any answers would be helpful!

Ok so just to get this straight, in order to use dynamic link between adobe premiere pro and after effects you have to have the complete suite? or just the same version installed? all I want to be able to do is have a good workflow between premiere pro to after effects to get my vfx done, and then send them back to premiere seemlesly without spending $2000 dollars on the entire suite just to use those 2 programs and because the suite is way over my budget. is that the only possible way (other than cs6, because I dont have the $$ to update either)

Dynamic link from Premier to AE CS6 not working well

Just downloaded CS6 2 days ago and today I tried converting a HDV video sequence with two titles on tracks 2 & 3 into an After Effects comp.
So AE launched and all copied over but my two titles came over as black solids! So I deleted them then I right clicked on the 1440x1080 HDV video layer in the HDV comp and choose Track Camera, it spent some time anlayzing the video and then said "Layer size must match Composition"
So seems to be some bugs in the whole dynamic link transfer system between premier pro and AE in CS6 ???

Dynamic Link is designed to bring over footage items, but titles are created dynamically inside Premiere and do not exist as footage first. As a result, I am not surprised they do not come into AE through the dynamic link.
The best workflow is to start with the superior text manipulation inside After Effects. You can get much more control and power from within AE. If you aren't sure how to start working on text there, there are many, many excellent free tutorials at CreativeCow.net or paid instructional videos with Lynda.com or Video2Brain.com.
Otherwise, do not bring the titles into AE - make any adjustments you want to make to your footage, and keep the titles separate.

Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE. Only if I alter the Video track does it then take the changes reflected. Any suggestions as to what is causing this?
Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
Neil

Dynamic Linking between Premiere pro cs6 CC and After Effects is shaded grey and not working.

Hi, I currently have a CC membership with everything included in the package. I have already downloaded Premiere Pro CS6 and After Effects. However, I cannot figure out why , when I right click a video clip in Premiere, the dropdown menu has the 'replace with after effects' option within the list greyed out, apparently not an option for me. I've browsed several tutorials and all of them illustrate using dynamic linking with ease as a readily available option. Can anyone help with this please?

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Why i can't use dynamic link between After effects and Premiere Pro?

I have installed the Creative Cloud version of After effects and Premiere Pro (only them, no other software of the suite) but i still can´t link them with dynamic link. the option is in grey, and i can't even click on it.
Some help? please!

Ok, here goes some information about my hardware and software:
Allienware M14XR2
Intel Core i7-3610 QM CPU @ 2.30 GHz
RAM 8 GB
Windows 7 Home premium
NVIDIA GE force 650 M
I'm working in a Premiere Pro project using 1920x1080 .mov archives, and the project is in the same resolution.
In Premiere pro, when i go to Archive > Dynamic Link i only have the option of send it to Encore.
Is this information enough?
thanks

Dynamic link between Premiere CC and After Effects CS6 doesn't seem to be working :(

I'm editing with RED r3d files. I have just updated to CC but it doesn't want to dynamic link with After Effects CS6

Hello,
Sorry but Dynamic Link only works between the same version of the products.
Best,
Peter Garaway
Adobe
Premiere Pro

UFT 11.53 - toggle between keyword view and editor not working

Hello,
I have installed the enterprise version of UFT 11.53. I have patched it with Patch # 3 (00082) and Patch # 4 (00106) in order to get Chome v 37 support. Now when I try to toggle between keyword View and editor, it is not working. The editor is fine. The Keyword just set frozen and will not allow me to do anything other than, change it back to the editor
see when I click the toggle button...its frozen...see the toggle button is down.
It's so annoying. I'm going to have to uninstall it again.
Please help, if you know what's going on

Hello sfarren,
The forum you want is the HP Enterprise Business Community.
Right now you are in the consumer products forum.
I am guessing this link is the area you will want to ask your question at.
http://h30499.www3.hp.com/t5/Unified-Functional-Testing/bd-p/sws-Fun_TEST_SF
Good luck and hope it helps.
PS: You might have to register again to post on that forum.

Home Sharing between Macbook Pro and AppleTV not connecting, what's wrong?

So I have one of the late 2011 Macbook Pro models and the newest AppleTV that I do a lot of Home Sharing for movies and stuff like that. This problem keeps popping up though where they can't communicate with each other and the videos either stop loading half way through, or my AppleTV can't even connect with my macbook to start watching at all. I've gone through most of the possible solutions I've seen posted before and even the troubleshooting by apple about it. I've made sure they are both on the same apple ID, the same wi-fi network, restarted my router, even re-setup my router from scratch, closed itunes on my macbook, turned my wifi on and off a couple of times (worked for a few then stopped again), made sure that everything is on the most current software, but nothing seems to be doing the trick. This has been going on for months now and I'm pretty much sick of it happening. Somebody please help me fix this so I can get on with my movies!!

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
If this doesn't help, contact your ISP, this is most likely a network problem.

Transfer of help between F4 Help and Application not working

I need immediate help in determining why the F4 help for BP Search not returning the selected field to the calling application.
After the user selects the F4 BP search help screen and performs a search the value selected is not returned and displayed in the calling application.
What is the missing link? Also, the field not populating was one that I added through PCUI.
Thanks.
Jason

your probably best off phoning motorola because obviously theres something wrong with your phone which ony they can sort out there phone number is: 0870 9010 555
hope you get your phone sorted and hope this is a help to you

RFC conn between SAP ERP and TREX not working

Hi experts,
we run a TREX instance on a Windows 2003 server and use it for our HCM portal.
The solution is in operation since 2 years but actually we face the problem that objects which have been created within the last month will not be covered by the index.
Without knowing about any changes in the setup I see the following error message when I perform the RFC connecten test in our ERP system:
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program Trex_UKP_20071025104543 not registered
Error Details     LOCATION: SAP-Gateway on host janos / sapgw00
Error Details     DETAIL: TP Trex_UKP_20071025104543 not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 12906
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Jul 27 10:34:48 2009
Error Details     VERSION: 2
In the TREX admin tool on the Windows server I see the following log message:
Source->Destination: Not set in TREX but TREX reachable -> ini file section missing?.
After reading lots of notes I guess that I have to register the server program that's used in the RFC on the gateway.
Unfortunately I have no idea how to do that.
Has anybody experiences with such a problem case or can tell me how to continue?
Is the problematic RFC realy the reason of my problem or just another side effect?
Many thanks for your really appreciated help in advance and best regards
Günter

Hi again,
the saprfc.ini on the TREX server look like follows:
DEST=UKT
TYPE=A
ASHOST=medos
SYSNR=00
DEST=UKP
TYPE=A
ASHOST=janos
SYSNR=00
UKT is our test system which is connected to the same TREX server and everything is fine there.
On the test system I can also see the registered server program in SMGW.
UKP is our productive system where the configuration should be the same.
Of course I do not see the registered server program in SMGW there.
Is the way described in above link (RFCACCEPT) the only correct way to register my server program?
I ask because I found information that the server program has to be developed according to this rfcaccept command and I have absolutely no idea wheather this is so.
Thanks again for your help!
Günter

Programs suddenly quitting on my Macbook Pro and Airport not working right

I upgraded from an ibook to a Macbook pro about a month ago. Over the past month at least once a day a random program will "unexpectedly quit" on my computer. I have updated all the software on my computer and dont really run much peer to peer software. Also, after waking up from "sleep" my airport will suddenly stop working or even recognizing the my network. This is only solved by a restart. Can anyone help with this? I never had these problems with my sturdy old ibook. Between the high temp my computer reaches, the relatively short battery life, and the issue with all the software quitting I'm starting to feel like I was sold a lemon. Any positive feedback would be appreciated.
macbook pro 15' Mac OS X (10.4.6)

I have a 15 inch mbp and while i am using it the computer shuts down while i am working in word. This is upsetting as I am losing what I havent saved since the last save.
This problem cropped up today. Any thoughts or suggestions. I havent added anything by way of ram or other hardware.
Please I need your thoughts. This is my first mac.
Thanks for the assist

Trunk between 4500-X and 4507R not working

Hi all,
i have got a new switch (4500-X) which i would like to connect to our existing 4507R switch. So i configured trunk ports on each of them, like i do this with all of my other access switches. I tried so many things, but i cant reach vlans from the new switch and iam totaly out of ideas
Iam quite sure that i make a verry dump config issue, but i cant fine the fault in my config...hopyfully someone could please help me? I hope this is the right information you need.
Many many Thanks!
The "OLD" Switch (4507R):
OLD#sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(54)SG, RELEASE SOFTWARE (fc3)
OLD#sh run int gi3/6
Building configuration...
Current configuration : 149 bytes
interface GigabitEthernet3/6
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
end
OLD#sh int gi3/6 switch
Name: Gi3/6
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: Off
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
OLD#sh int gi3/6 trunk
Port        Mode             Encapsulation Status        Native vlan
Gi3/6       on               802.1q         trunking      1
Port        Vlans allowed on trunk
Gi3/6       1-4094
Port        Vlans allowed and active in management domain
Gi3/6       1-3,9-10,20,23-24,26,32-40,66-68,95-101,110-111,120,200,500-501,510,995-999
Port        Vlans in spanning tree forwarding state and not pruned
Gi3/6       1
The "NEW" Switch (4500-X):
NEW#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.04.00.SG RELEASE SOFTWARE (fc3)
NEW#sh run int te1/32
Building configuration...
Current configuration : 94 bytes
interface TenGigabitEthernet1/32
switchport mode trunk
end
NEW#sh int te1/32 switchport
Name: Te1/32
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
NEW#sh int te1/32 trun
Port        Mode             Encapsulation Status        Native vlan
Te1/32      on               802.1q         trunking      1
Port        Vlans allowed on trunk
Te1/32      1-4094
Port        Vlans allowed and active in management domain
Te1/32      1-3,9-10,20,23-24,26,32-40,66-68,95-101,110-111,120,200,500-501,510,995-999
Port        Vlans in spanning tree forwarding state and not pruned
Te1/32      1-3,9-10,20,23-24,26,32-40,66-68,95-101,110-111,120,200,500-501,510,995-999

Hi!
Yes, sure:
######### OLD ##########
OLD#sh spanning-tree vlan 3
VLAN0003
Spanning tree enabled protocol ieee
Root ID    Priority    32771
             Address     000c.30b1.7540
             This bridge is the root
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority    32771 (priority 32768 sys-id-ext 3)
             Address     000c.30b1.7540
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 300 sec
Interface           Role Sts Cost      Prio.Nbr Type
Gi3/5               Desg FWD 4         128.133 P2p
Gi3/6               Desg FWD 4         128.134 P2p
Gi4/2               Desg FWD 4         128.194 P2p
Gi4/3               Desg FWD 4         128.195 P2p
Gi5/1               Desg FWD 4         128.257 P2p
Gi5/3               Desg FWD 4         128.259 P2p
Gi5/4               Desg FWD 4         128.260 P2p
Gi5/5               Desg FWD 4         128.261 P2p
Gi5/6               Desg FWD 4         128.262 P2p
Gi6/1               Desg FWD 4         128.321 P2p
Gi6/2               Desg FWD 4         128.322 P2p
Gi6/3               Desg FWD 4         128.323 P2p
Gi6/5               Desg FWD 4         128.325 P2p
Gi6/6               Desg FWD 4         128.326 P2p
Gi7/1               Desg FWD 4         128.385 P2p
Gi7/2               Desg FWD 4         128.386 P2p
Gi7/4               Desg FWD 4         128.388 P2p
Gi7/5               Desg FWD 4         128.389 P2p
Gi7/6               Desg FWD 4         128.390 P2p
Po3                 Desg FWD 3         128.643 P2p
Po6                 Desg FWD 3         128.646 P2p
Po7                 Desg FWD 3         128.647 P2p
OLD#sh int gi3/6
GigabitEthernet3/6 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet Port, address is 0016.9dd4.1fe7 (bia 0016.9dd4.1fe7)
Description: trunk core NEU
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is auto, media type is 1000BaseSX
Media-type configured as SFP connector
input flow-control is on, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:04, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 9000 bits/sec, 16 packets/sec
     809802 packets input, 156747108 bytes, 0 no buffer
     Received 809180 broadcasts (809157 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     77368681 packets output, 5652973144 bytes, 0 underruns
     0 output errors, 0 collisions, 3 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
######### NEW ##########
NEW#sh spanning-tree vlan 3
VLAN0003
Spanning tree enabled protocol ieee
Root ID    Priority    32771
             Address     000c.30b1.7540
             Cost        4
             Port        32 (TenGigabitEthernet1/32)
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority    32771 (priority 32768 sys-id-ext 3)
             Address     f872.ead8.4400
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 300 sec
Interface           Role Sts Cost      Prio.Nbr Type
Te1/32              Root FWD 4         128.32   P2p
NEW#sh int ten 1/32
TenGigabitEthernet1/32 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet Port, address is f872.ead8.441f (bia f872.ead8.441f)
Description: trunk sw99rz1-1-1
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is auto, media type is 1000BaseSX
input flow-control is on, output flow-control is on
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 13000 bits/sec, 18 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
     365663 packets input, 26752705 bytes, 0 no buffer
     Received 365496 broadcasts (363520 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     3843 packets output, 745065 bytes, 0 underruns
     0 output errors, 0 collisions, 3 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
Thanks a lot!
tobias

Screen Sharing between Mountain Lion and Tiger not working

rMBP running 10.8.2 ML and a G3 iMac running 10.4.11 Tiger.
When I try and use Screen Sharing on the MBP to connect to the G3 it prompts for both a username and password. I enter a valid user and pw but it fails with
Authenication failed to "Ruby".
Please verify you have entered the correct name and password.
Third-party VNC clients, e.g. JollysFastVNC on my MBP and Remoter on my iPhone, can connect fine, but they only request a password.
Any ideas?

I've been using Screen Share on my home network for a very long time. My most used computer, MacBook Pro (2011) was just upgraded to ML, my desktop still has Lion on it - and can't be upgraded because it is an early MacPro. I was having intermittant problems getting the MBPro to connect to the MPro screen, and resetting the PRAM was correcting it (but it could have been the rebooting process alone - I don't know). Now I can share the MPro disks on my network but not the screen. Now, to me, that's wierd. I've tried doing all kinds of setting checks, preference removal, etc. No luck. I can, however (as someone above mentioned) connect from my MPro (Lion) to my MBPro (ML) screen. I've checked my Intego VirusBarrier X6 settings, i.e. blocked addresses (in the past that has happened and blocked) and I've even entered my MBPro address into the approved address section. I've checked/rechecked the Sharing Preferences, turned them on/off, etc. All to no avail.
Is this a Mountain Lion / Lion issue, a Mountain Lion issue, or something somewhere corrupt? I used to have Remote Desktop on the MPro, but for my needs Screen Share & Disk Share suit my needs on my home network. I have LogMeInIgnition, which when the last time I tried to connect to the MBPro it showed it offline - and it isn't. I feel there's something in ML blocking things.
I'm open to suggestions, and a fix if needed. This is frustrating. Not that I can't use the exercise to walk to the room where the MPro is - not the point.
Tom

Dynamic Link between Premire Pro and AE not working

Similar Messages

Maybe you are looking for