Dynamic link error message again?

Hi
I am running Bridge CS6, somethimes with photoshop CS6.
I am running mac OSX.6.8 (snow leopard).
mac book pro
I am getting the dynamic link error message again after not having the problem since CS6beta. It sometimes is only with mov or other movie files but sometimes it is with all. It is also very slow and sluggish in general.
When I click on a video files Bridge spins the wheel for a whlie and then gives me the below error message
(in case the screen shot does not load)
The error message reads
"dynamiclinkserver has encountered an error"
and then it reads off a file thread. and then I must click to continue
I click to contiue. the message comes back. I click once more and the file then presents. I click to play the vid. the error message again comes back. And I must repeat the clicking twice. I have reset the preferences and purged the cashe. I have installed the patch I found in the forum too. thanks for any help you can render, Uhane

Yes I did that while talking to tech support on the phone. They had given up and refered me to an upper tech support staff who was supposed to call me back but never did. Where is a link to this udate? It did not show up when I ran the updater.?! As for permission listed as a culprit on the other thread you link to I have no such firewall or other software running. All the permissions have been set to my admin accnt which is the one and only accnt on this machine. I had NO problem since the beta version and then all of sudden it started again with the dynamic link fail with somoe files types in the last day or so. As for the other problems ... I honestly don't have a clue but assume they are all related to a single cause as they all showed up at the same time. I will reset once more. All start up scripts are checked. always have been. Can you tell me more about this update?? Is there a link? I will go fish...thanks for your help

Similar Messages

Sqlplus stack trace, dynamic link error.

When using sqlplus through the Oracle Enterprise Manager, or on the commandline, if I try to query a XMLType table, it dumps a stack trace, failing with the error message:
Dynamic link error: libxdb.so: cannot open shared object file: No such file or directory
I've done a full Oracle 9.2.0.1.0 Client installation, but this library isn't in my $ORACLE_HOME/lib. How do I get this file?

Hi,
Maybe not much use to you, but on Solaris, with a full Enterprise install, this library is in my $ORACLE_HOME/lib.
So maybe you can find it on the EE CDROM?
Regards
Pete

Adobe Dynamic Link Error

Lately, when I try to open a Premiere Pro CS3 or CS4 project in Encore CS4, I set this error message: "an adobe dynamic link error occurred". It used to work but now it doesn't. Anyone know why?

Something went corrupted in your system you will have to run the Clean-up Scripts and reinstall.
Best thing to have full functioning Reinstall from a Clean Formated hard Drive
Regards
Julio Cesar

Premiere Pro CS4 export doesn't work Dynamic Link Error

I am on Windows XP and have upgraded to Premier Pro CS4. I have under a 2 minute video that will not export (combo of photos and avi files we shot and a couple purchased avi in the NTSC format). AME sits on a "Waiting" status with no sign of movement. After an hour I turned it off. Tried to open AME and add the sequence, when I get the Adobe Dynamic Link Error - at least I get an error. What is this? I have no extra items on the timeline and have deleted the other sequences out to see it that mattered - no. I have done the updater and have the latest updates - still nothing. What am I missing? What should I be looking for? Help Please.

Antivirus isn't an issue and I have a lot of space.
Gerri
Allan Block
"This is a transmission from Allan Block Corporation and may contain
information which is privileged or confidential. If you are not the
addressee, note that any disclosure, copying, distribution, or use of
the contents of this message is prohibited. If you have received this
information in error, please destroy it and notify us immediately at our
telephone number (952) 835-5309."

Broken link error message

I get an error message whenever I click "help with this widget." It tells me that the link (to Adobe help??) is broken and that I must send an email. But it doesn't tell me where to send the email, or to whom. I desperately need help with this widget and am frustrated by the broken link.

From: Nancy O.
Sent: Thursday, January 31, 2013 5:33 PM
To: CeliaThaxter
Subject: Broken link error message
Re: Broken link error message
created by Nancy O. in Dreamweaver - View the full discussion

Dynamic link error while executing XQUERY in SQL*Plus

Hi,
When I'm doing the following XQUERY in SQL*Plus (version 11.2.0.3.0 instant client for mac64bit) :
XQUERY declare default element namespace "http://xmlns.oracle.com/xdb/xdbconfig.xsd"; (:
       (: This path is split over two lines for documentation purposes only.
          The path should actually be a single long line.
       for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/
        webappconfig/servletconfig/servlet-list/servlet[servlet-name="orawsv"]
       return $doc
I'm getting the following error:
Dynamic link error: dlopen(/Users/markbeelen/Oracle/instantclient_11_2/lib/lib/libxdb.dylib, 9): image not found
OCI-21500: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
Errors in file :
OCI-21500: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
ERROR:
OCI-21500: internal error code, arguments: [unable to load XDB library], [],
Any ideas how to solve this?

Got same issue with :
Component
Version
=========
=======
Java(TM) Platform
1.6.0_41
Oracle IDE
3.2.20.09.87
Versioning Support
3.2.20.09.87
Alternate path for SqlHistory directory :
C:\Users\USER_NAME\AppData\Roaming\SQL Developer
Best Regards,
F.L.

Dynamic Link Error when sending sequence to AME

Hi,
I have a very short sequence without errors in premiere pro, but when I drag the project over to Adobe Media Encoder, I get a "Dynamic Link Error"...
"There was an error when adding selected sequence to the batch".
Any ideas on how I can fix this? Currently I have to export sequences one at a time, and that's not going to be cool in the near future.
Premiere pro 6.0.5
Adobe media encoder 6.0.1.31
---Trav

Have you tried Queuing from PP instead of dragging?

How can I fix an invalid sibling link error message without my original install disk?

How can I fix an invalid sibling link error message without my original install disk?

Hi Jeff,
It's not even likely the Install Disc could fix that, but if you want to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
You must repair the HD, your best bet is likely DiskWarrior.
BTW, you might enjoy these DiskWarrior review/recommendations...
http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801
http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
http://discussions.apple.com/thread.jspa?messageID=11918925&#11918925
http://discussions.apple.com/thread.jspa?messageID=12684129#12684129
http://discussions.apple.com/thread.jspa?messageID=12744794&#12744794
http://discussions.apple.com/thread.jspa?messageID=12912879#12912879
Finally, you should run DiskWarrior if your Mac explicitly warns you of a problem with your disk in the form of an error message. Most of these errors are reported by the built-in Disk Utility whether your Mac OS X version is 10.3 Panther, 10.4 Tiger, 10.5 Leopard, 10.6 Snow Leopard or 10.7 Lion. Here are some of the most common messages:
Disk Repair: The disk was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible.
The underlying task reported failure on exit.
Invalid node structure.
Keys out of order.
Invalid key length.
Invalid directory item count.
Invalid extent entry.
Invalid record count.
Invalid index key.
Invalid sibling link.
http://www.alsoft.com/DiskWarrior/details3.html

Dynamic Link Error CS5

I just installed the CS5 Production Premium and everything is running great, except for one error. If I have a clip (DSLR from a T2i) on the timeline and left click it and select "Replace with After Effects Composition" I get an error message stating that I have to have the Production Premium Suite for that feature. However, if I open After Effects before I try to replace the clip with a composition from AE it works fine. Once I use the "Replace with After Effects Conmosition" command once, I can close AE and use the command again and everything works. It seems like I have to have PPRO and AE open at the same time on the first attempt to send files to AE. Once I restart my computer, I have to open PPRO and AE at the same time in order for it to work again. Also, any dynamically linked files from AE show up as offline in PPRO the first time opening a project after restarting my computer. Does anyone else have this problem?

Wil,
I unistalled AE CS4 (it was the only part of the CS4 suite I had installed) and the problem occured once more, but I can not get it to do it again. It appears that there may have been a conflict. I will report back if the problem persist. Thank you for your time.

Media Encoder Dynamic Link error 5027 :: 12 ????

While trying to send a file to media encoder from after effects in order to render in a file format not located within ae i was given an error message that my adobe media encoder was not installed 5027 :: 12 dynamic link server failed . When i launch media encoder by itself it launches fine. Any help appreciated

open ame and add your file to the ame queue.

Plug in error message again

Had a hard drive poop out, and reinstalled an older one again. It works OK except for the PM area. Now am getting some error messages at wheat used to be easy, and was once a part of the F.A.Q. or problems here. Now cannot find the URL. I am going through the Plug-in blues once again. Am trying to export a PM 6.5 page to PDF, and keep getting the below error message. I have atempted to re-install Distiller a few times, but keep coming up with the error message. It used to be as easy as re-install the PDF Distiller, but that don't do it anymore.
Cannot register Plug-in. Please re-install the plug in component. Invalid function number. 9010:0001
What to I have to link over to or try and re-install once again then?
Wm.

Have a look at this FAQ and the pages it refers to:
John Davies, "2.9 - Error "Plug-in error: Plug-in cannot be completed..." during startup" #1, 12 Apr 2005 2:18 pm
There's also this page in Adobe's PM KB:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328525
If you're using PM6.5 and WinXP, then take note of this:
Donald Gruener, "7.1 - PageMaker 6.5 (or older) on Windows XP" #1, 25 Jan 2002 7:52 am
Note that it was written over 6 years ago.
Iechyd da! John
18:48 13/11/2008 GMT

Dynamic Link Error: Source is empty.

This is an error I'm frequently getting when dragging Sequences over to Adobe Media Encoder. The error is false, because all my Sequences have media in them.
I have a couple of projects ongoing. One has 7 sequences, another has 30. I'm getting the error randomly; some Sequences travel over to AME fine, and others give me the error.
I've deleted prefs for both Pr and AME, rebooted, etc. and I still the issue persists. Sometimes, I'll drag the same Sequence to AME a second time, and it will transfer over with no error.
The issue is forcing me to export directly from Pr as a workaround. Sequences export without issue this way.
BTW, there's a pref in AME: "Import Sequences Natively" that when CHECKED, decides on its own to ignore in-outs and render only part of sequences. So, I always leave that unchecked, which uses Dynamic Link. Soo... this could be a Dynamic Link bug, I suppose.
Has anybody seen this and know of a fix?
Mac 10.8.5 - nVidia Quadro K5000 - most current versions of Pr (8.2.0 (65)) and AME (8.2.0.54)

To add to what I posted, I just tried quitting and relaunching both Pr and AME, and was able to drag Sequences to AME and some that gave me the error were now dragging over without error.
I also noticed something that is either a serious bug or just a major WTF in the programming: When I drag a Sequence to AME, the name of my Pr project changes to the temp file name for the cache that Dynamic Link uses. This is AWFUL. I might save over that cache file project, and then when I go to AME to use the plus button to add a Sequence from what I THOUGHT was the current version of my project it's in a previously saved, and not current state. THIS IS BAD. Adobe, please fix this so that my Pr Project doesn't rename itself when I drag a Sequence to AME!
I have also learned that if I get the error when dragging my Sequence from Pr, and try using the Plus sign in AME to load the same sequence, I don't get the error message, and the Sequence exports/renders properly. I'm concluding that this is a bug.

Dynamic Link Error (trying to render the Comp)

Using Premiere Pro CC and After Effects CC:
AE won't let me render a lossless video from a comp I created using Dynamic Link inside Premiere. The workflow I'm currently trying to use is to lay out all my clips in Premiere, dynamic link to AE for denoise, grading, sharpening, add grain, stabilize, etc, render a lossless clip in AE, and then replace the dynamic link comp in the Premier timeline. Unfortunately I get an error everytime I try to render my Comp from AE. It will render a single frame using "Save Frame As" but it errors out with a sequence (.avi, .mov, and I even tried a targa sequence).
I'm running a Windows 7 64 bit workstation.

Can you create a comp from scratch not using the footage from Premiere and render a lossless video from the timeline? Can you create a simple comp in AE using your footage original footage without effects and render a lossless version? Can you apply the same filters applied to the comps that crash to any footage a successfully render?
If the answer to question 1 is yes and the answer to question 2 is no then we need to know all about the original footage. What codec, frame rate, what camera. If the answer to question 3 is no then we need to know exactly what the filters are. An error message or crash report would also help.
Without answers to these questions it's nearly impossible to tell what is going on because we don't have enough information.

CS5.5 Production Premium Dynamic Link error

I have trial CS5.5 Production Premium. I'm trying to dynamic link premiere pro to after effects but error "Using Adobe Dynamic Link with Adobe After Effects requires Adobe Production Premium". I already instal Production Premium.I reinstall but still ongoing. I need a solution.

Try using a Forum search or a Google search - 'Using Adobe Dynamic Link with After Effects requires Adobe Production Premium' was quite common error. Deactivating and reactivating the Suite resolved the issue in most cases.

Dynamic Link Error

When I go to File>Add After Effects Composition I've got an error: "Could not connect to Adobe After Effects. Please verify that Aobde After Effects and Adobe Dynamic Link components are installed"
Please Help.

Hi,
For dynamic link for work as intended, you got to have the Apps on the exact same versions e.g., if After Effects is on 2014.2, Media Encoder should also be 2014.2
Thanks,
Rameez

Dynamic link error message again?

Similar Messages

Maybe you are looking for