Dynamic Link Error when sending sequence to AME
Hi,
I have a very short sequence without errors in premiere pro, but when I drag the project over to Adobe Media Encoder, I get a "Dynamic Link Error"...
"There was an error when adding selected sequence to the batch".
Any ideas on how I can fix this? Currently I have to export sequences one at a time, and that's not going to be cool in the near future.
Premiere pro 6.0.5
Adobe media encoder 6.0.1.31
---Trav
Have you tried Queuing from PP instead of dragging?
Similar Messages
-
Premiere Pro CS4 export doesn't work Dynamic Link Error
I am on Windows XP and have upgraded to Premier Pro CS4. I have under a 2 minute video that will not export (combo of photos and avi files we shot and a couple purchased avi in the NTSC format). AME sits on a "Waiting" status with no sign of movement. After an hour I turned it off. Tried to open AME and add the sequence, when I get the Adobe Dynamic Link Error - at least I get an error. What is this? I have no extra items on the timeline and have deleted the other sequences out to see it that mattered - no. I have done the updater and have the latest updates - still nothing. What am I missing? What should I be looking for? Help Please.
Antivirus isn't an issue and I have a lot of space.
Gerri
Allan Block
"This is a transmission from Allan Block Corporation and may contain
information which is privileged or confidential. If you are not the
addressee, note that any disclosure, copying, distribution, or use of
the contents of this message is prohibited. If you have received this
information in error, please destroy it and notify us immediately at our
telephone number (952) 835-5309." -
Error when sending message: 404 not found
Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod. -
Sqlplus stack trace, dynamic link error.
When using sqlplus through the Oracle Enterprise Manager, or on the commandline, if I try to query a XMLType table, it dumps a stack trace, failing with the error message:
Dynamic link error: libxdb.so: cannot open shared object file: No such file or directory
I've done a full Oracle 9.2.0.1.0 Client installation, but this library isn't in my $ORACLE_HOME/lib. How do I get this file?Hi,
Maybe not much use to you, but on Solaris, with a full Enterprise install, this library is in my $ORACLE_HOME/lib.
So maybe you can find it on the EE CDROM?
Regards
Pete -
Dynamic link error while executing XQUERY in SQL*Plus
Hi,
When I'm doing the following XQUERY in SQL*Plus (version 11.2.0.3.0 instant client for mac64bit) :
XQUERY declare default element namespace "http://xmlns.oracle.com/xdb/xdbconfig.xsd"; (:
(: This path is split over two lines for documentation purposes only.
The path should actually be a single long line.
for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/
webappconfig/servletconfig/servlet-list/servlet[servlet-name="orawsv"]
return $doc
I'm getting the following error:
Dynamic link error: dlopen(/Users/markbeelen/Oracle/instantclient_11_2/lib/lib/libxdb.dylib, 9): image not found
OCI-21500: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
Errors in file :
OCI-21500: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
ERROR:
OCI-21500: internal error code, arguments: [unable to load XDB library], [],
Any ideas how to solve this?Got same issue with :
Component
Version
=========
=======
Java(TM) Platform
1.6.0_41
Oracle IDE
3.2.20.09.87
Versioning Support
3.2.20.09.87
Alternate path for SqlHistory directory :
C:\Users\USER_NAME\AppData\Roaming\SQL Developer
Best Regards,
F.L. -
Lately, when I try to open a Premiere Pro CS3 or CS4 project in Encore CS4, I set this error message: "an adobe dynamic link error occurred". It used to work but now it doesn't. Anyone know why?
Something went corrupted in your system you will have to run the Clean-up Scripts and reinstall.
Best thing to have full functioning Reinstall from a Clean Formated hard Drive
Regards
Julio Cesar -
Dynamic link error message again?
Hi
I am running Bridge CS6, somethimes with photoshop CS6.
I am running mac OSX.6.8 (snow leopard).
mac book pro
I am getting the dynamic link error message again after not having the problem since CS6beta. It sometimes is only with mov or other movie files but sometimes it is with all. It is also very slow and sluggish in general.
When I click on a video files Bridge spins the wheel for a whlie and then gives me the below error message
(in case the screen shot does not load)
The error message reads
"dynamiclinkserver has encountered an error"
and then it reads off a file thread. and then I must click to continue
I click to contiue. the message comes back. I click once more and the file then presents. I click to play the vid. the error message again comes back. And I must repeat the clicking twice. I have reset the preferences and purged the cashe. I have installed the patch I found in the forum too. thanks for any help you can render, UhaneYes I did that while talking to tech support on the phone. They had given up and refered me to an upper tech support staff who was supposed to call me back but never did. Where is a link to this udate? It did not show up when I ran the updater.?! As for permission listed as a culprit on the other thread you link to I have no such firewall or other software running. All the permissions have been set to my admin accnt which is the one and only accnt on this machine. I had NO problem since the beta version and then all of sudden it started again with the dynamic link fail with somoe files types in the last day or so. As for the other problems ... I honestly don't have a clue but assume they are all related to a single cause as they all showed up at the same time. I will reset once more. All start up scripts are checked. always have been. Can you tell me more about this update?? Is there a link? I will go fish...thanks for your help
-
Error when sending message: 403 Forbidden....sender si file
hi...
here iam working with File to IDoc scenario
file is picking from a particular source but its is not showing any messages in SXMB_MONI and in IDX5 (outbound) or in RWB.
when i check test my message in RWB its is showing Error when sending message: 403 Forbidden.
can anyone explain me this problem plz...
all my DESIGN and CONFIGURATION is fine....
its urgent...
THX..
john weslyHi John
403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
http://www.helpwithpcs.com/courses/html/html_http_status_codes.htm
first try to solve problem by making CACHE refresh
either by directory
Check whether you have given the right credentials. If you are very sure that you have given right credentials then your problem will be solved by restarting J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
Thanks
sandeep sharma
PS ; if helpful kindly reward points -
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem. -
Error when sending message: 500 Internal Server Error
Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
NisarI think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar -
RFC error when sending logon data
Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.* Start profile START_DVEBMGS00_erptest *
#.* Version = 000006 *
#.* Generated by user = BASIS *
#.* Generated on = 30.12.2010 , 15:40:55 *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created by: BASIS 24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created by: BASIS 24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created by: BASIS 24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created by: BASIS 24.12.2007 23:53:27
MS = msgserver.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created by: BASIS 24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created by: BASIS 25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created by: BASIS 25.03.2004 08:37:47
#old_value: 3 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created by: BASIS 16.06.2007 17:35:41
#old_value: 2
#changed: BASIS 14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created by: BASIS 10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value: changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000 changed: BASIS 20.04.2005 17:17:01
#old_value: 0 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000 changed: BASIS 28.03.2005 23:17:11
#old_value: 2 changed: BASIS 29.03.2005 12:09:14
#old_value: 0 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created by: SAP* 08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created by: ALPER 13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created by: BASIS 27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created by: BASIS 30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created by: BASIS 30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created by: BASIS 30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created by: BASIS 18.05.2005 09:20:25
#old_value: 90 changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created by: BASIS 20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS 03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created by: BASIS 20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS 03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created by: BASIS 08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS 30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS 03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created by: BASIS 08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created by: BASIS 08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created by: BASIS 08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created by: BASIS 08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS 03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created by: BASIS 08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created by: BASIS 08.07.2003 20:34:46
#old_value: 5000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created by: BASIS 08.07.2003 20:33:56
#note 103747
#old_value: 10607 changed: BASIS 08.07.2003 20:34:58
#old_value: 10000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created by: BASIS 08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076 changed: BASIS 28.06.2005 19:36:21
#old_value: 5735 changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan -
Linking errors when using ibsta
Hello,
I have been trying to write C code to automate a Keithley 2410 through GPIB. I am using Windows XP 32-bit, and VC++.
I believe I was successful in getting a handle to the gpib-32.dll. However, I am getting a linking error when I try to use ibsta: 1>helloworld.obj : error LNK2001: unresolved external symbol _ibsta
1>C:\Documents and Settings\Prober\My Documents\C Programs\helloworld\Debug\helloworld.exe : fatal error LNK1120: 1 unresolved externals
However, when I look through the ni488.h, I see that ibsta is a global variable. Therefore I am confused as to why I am getting a linking error
I am following this guide: http://na.tm.agilent.com/pna/help/latest/Programming/GPIB_Example_Programs/GPIB_using_Visual_C++.htm
My code is attached
Attachments:
code.c 3 KBCheck out the 4882query.c example located on your computer at National Instruments > NI-488.2 > Examples > Standard C > 4882query. The National Instruments folder might be in a sub-folder of Public or Public Documents. Look at the ReadMe.txt file first. It contains a C++ section. Then try compiling the example and see what happens.
Jeff Munn
Applications Engineer
National Instruments -
Error when sending message: 500 Timeout
while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini -
Test message from RWB: Error when sending message: 401 Unauthorized
Hi Experts,
While I am sending test message from RWB, I am getting following error:
Error when sending message: 401 Unauthorized
I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
I am having SAP_ALL authorizations and few days back everything was fine.
I think something wrong with configuration in XI but I am unable to pin point.
Please help.
Regards,
GouravYes,
but
Role of Business System : Integration system
Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
How can I change it to Application system
and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
Regards,
Gourav -
RWB:Error when sending message: 404 Not Found
Dear all,
"i am getting error: Error when sending message: 404 Not Found"
while testing from rwb > Component Monitoring > Non-Central Adapter Engines > Adapter Engine AIPID > test message >
with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
and my id comm channel > target host > bid.xxx.com with service no
(adapter type: xi
adapter engine: Integration server
address type: url address
target host: bid
service no: 8000
path: /sap/xi/engine?type=entry
i am working in nw2004s system)
while testing cache connectivity test from rwb > Component Monitoring
i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
green: Integration Repository
green: Integration Directory
green: Integration Server - JAVA
red:Adapter Engine af.axd.aipid
yello:Integration Server - ABAP
Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
what should i do?
best regards,
dushyant.
refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
and
SXI_CACHE
@8O@ Error during last attempt to refresh cache
LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
Smq2 = 0
Sm58 = 0Hi,
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Cheers
Manish
Maybe you are looking for
-
Creating Web Service from Java Class-How to eliminate nillable="true"
Does anyone know how to eliminate the attribute, nillable="true", from the element tags which describe the parameters in the WSDL created when creating a web service from a Java Class? It does this only for the string types. Is there something I need
-
Possible bug in Clipping Path - weird behaviour
I've got a bunch of images with clipping paths. All the same size. They're all book covers from a series. Well I applied a clipping path to all of them. Some when placed into InDesign will place fine with the clipping path applied. Others will not -
-
Check printing: Page break in Preview in PDF template
Hi, We ran the the check printing report which had two invoices. We uploaded the data file and trying to view in the preview. But it displays the last invoice only. I created text field and wrote "page_break=yes". But nothing happens. Can you please
-
I upgraded to the new operating system, Yosemite, on my 13" macbook pro. I installed the new itunes in the process of upgrading. My itunes library includes music files with "episode numbers." iTunes will display these, but appears not to allow me
-
Focus on null Jlist Item : Urgent
I am adding a empty item in JLIST on the click of button & bringing the focus on the the empty item.Now what is happening is it only showing a thin blue line instead of selecting the item properly.