Dynamic Link from After Effects CC to Premiere Pro CC Performance Issues

I just updated my After Effects and Premiere Pro to CC and since doing so I've found numerous performance issues. One that is seriously hurting my workflow is the poor performance of the dynamic link with After Effects compositions into Premiere Pro. In CS6, you could make a change to the AE composition, save it, click over to Premiere Pro and it would quickly update and you can play your timeline and preview your changes. You could also move the clips around and add cross dissolves and watch the changes quickly in Premiere Pro CS6. Now, since updating to CC, if you save the composition in AE and click over to Premiere Pro it won't update on its own. Sometimes it just shows a single frame of the AE composition. I found that if you right click and "Edit Original", go into AE and then click back over to Premiere Pro and it will finally update. But if you make any changes to the placement of the AE composition on the timeline, or add a cross dissolve, fade, etc. it again won't play the AE composition any longer. After you make any changes to the AE composition you have to right click and go to "Edit Original", go into AE, and then click back over to Premiere Pro.. Then it will finally update.
iMac
Quad Core 3.4GHz
32G RAM
OS X Mavericks

Thanks Kevin.
Unfortunately in my case the export doesn't solve the issue. The video only looks good while in the composition... I've tried exporting it in all the different formats with several codecs, but to no avail...
You can check my own post in the After Effects forum: AE linked composition looks different in Premiere

Similar Messages

Dynamic Link from After Effects CC Altered in Premiere Pro CC

I have created a series of animations in After Effects, but whenever I add a Dynamic Link in Premiere, the Dynamic links are altering their look.
Example: The particle world animation, Ice layer, Bounce layer and a Glue layer to create the effect that I want. Looks great in After Effects. When opened in Premiere Pro, all 3 layers bounce in sequence for no apparent reason. So why does Premiere feel the need to alter my file on import?
Example 2: Small End graphic animation with a phone number and website.. All is great until the last 4 seconds of the animation. For no good reason, the background flips?? I checked this in my After Effects file.. there is no reason for the flip to take place.. once again, only happens in my dynamic link imported into Premiere.
Anyone experience this? I trolled the forums looking for something similar and came out empty handed. Extremely frustrating. I have resorted to rendering out a quicktime video, but this is not an ideal way to achieve things. (that being said, the rendered quicktime video works just fine when imported into Premiere.
Thanks..
Shawn

Thanks Kevin.
Unfortunately in my case the export doesn't solve the issue. The video only looks good while in the composition... I've tried exporting it in all the different formats with several codecs, but to no avail...
You can check my own post in the After Effects forum: AE linked composition looks different in Premiere

Adobe dynamic link-From after effects to Premiere

I have few sequences save in different After effects versions because my project was to big to work with one final after effect version.
I would like to use Adobe dynamic link to send all the seuqences into Adobe premiere to make a "one sequence" that I could export.
But when I am using Adobe dynamique link, I need to close and open the differents versions saved in after effects.
When I do it, the sequences appear offline in Premiere.
What can I do to see all the sequences online?Do I have to work with affter effects online all the time?
Thanks a lot,
Alice

First and foremost, running After Effects is not necessary so as to be able to work with dynamically linked compositions in Premiere Pro. PrPro invokes headless version of AE in the background so as to communicate with dynamically linked comps.
Second, while working with dynamically linked compositions avoid incremental numbers at the end of your AE projects names. Better yet, avoid incremental numbers at the end of your dynamically linked comps names as well in both AE and PrPro by giving them meaning names instead of default ones. If you really need to include incremental numbers in those names, insert them somewhere in the middle. The bug related to incremental numbers at the end of the names was biting strongly in CS5.5 (don't remember if CS5 was affected as well) and was claimed as fixed in CS6.
See also this good old thread about Dynamic Link workflow: when it is wise to rely on Dynamic Link and when - on a digital intermediate. Pay attention to Todd's comments.

What is the most efficient way to use Remove Grain from After Effects on large Premiere Pro project?

I've tried to use Dynamic Linking both ways but it doesn't the effects don't appear no matter how dramatic I make them. Why couldn't there just be Remove Grain in Premiere Pro so I wouldn't have to go through the headache of figuring this out. I've tried importing the Premiere Pro project into After effects where everything comes up and, since there's so many files, it doesn't seam feasibly or convenient at all. Trying Dynamic Link vice versa didn't lend results either. What can I do??? Projects range from about a half hour to an hour and a half. Thank you.

The situations are well lit; it might be lack of knowledge on the camera settings itself.
Sort that and your workflow issue dissapears instantly.
There's nothing more efficient?
Yep...read above... but ...any Plugin. eg Neat Video... will take long processing time.
Fixing grain..actually "noise"...is always an image degrading process as well. It blurs!

Importing from After Effects and Adobe Premiere Pro

This question was posted in response to the following article: http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7f47 a.html

I don't think anybody is going to answer the question at this point... but WHAT are you supposed to do when the current version of AE informs you that it can't convert the file and you should "use an older version of AE and resave" to do it?? 1, I don't have the older version, those files were created almost a decade ago, and 2, what good would it do to "resave" it with the SAME older version??

Exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?

exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?
Help - I have an After effects project with multiple layered files and want to copy these to Premiere / Audition. For example I know if you select multiple video files from After Effects these can be pasted straight into Premiere intact - but this does not work with audio. I want to take existing layered audio files from After Effects to Audition / or Premiere but can't copy and paste - is there a simple solution for this?

Hi thanks Dave for responding - yes that could work as a 'workaround' - I was hoping there would be a way I can keep the existing independent audio layers and corresponding audio levels from After Effects- in the same way I can copy and paste video files from After Effects to Premiere - rather than exporting a flattened AIFF /WAV from After Effects.
This would then allow me a lot more control working on the final edit - especially as currently a lot of the audio layers overlap. It does seem there is no simple solution for this, so otherwise I can do what you suggest - and 'stagger all the audio files' in sequence so they do not overlap on the timeline and then when I import the flattened exported AIFF file into Audition/ Premeire / I then can cut it up again and recreate the overlaps. Was hoping there might be a simple copy + paste method or other 'export method' but I guess this is simply not possible. It would save me about 7 hours of work, but not the end of the world I guess
One final point - some of the audio clips are .mp3s but the majority are WAVS, hopefully this should not create any issues on the export.
thanks again for your help, if you or anyone has any other solution pls let me know
Best
Alex

Dynamic link to After Effects problem

My computer crashed a little while ago, and we had to reload the system, but no data was lost.
The project i am working on, has every single shot dynamicly linked to After Effects.
The links held up fine, but there is one problem, about 10 shots have some how recut them selves, and or have been shortend. The funny thing is, is that some how the audio still matches up. I cant seem to figure out how to solve this problem.
Any help at all would be greatly appreciated,
-Izzy

Just an update:
With disc utilities I repaired the permissions.
I reinstalled cs5 production premium.
I updated it to the actual version (flash occured an error, but the other ones were fine)
I opend the project: no links to most of the media.
I relinkt all media - except the dynamic links to After Effects. That just doesn't work.
I saved the project on a different drive with a different name.
Opend the new project and - again - most of the files didn't link again! Missing more than 10.000 links to jpegs, psds, mxfs.
I opend the new and the old project on another mac - same results.
I think, repairing permissions with disc utility doesn't affect Adobe's software (Apple says that some 3rd Party Applicaton might not be affected.)
I found a workflow for repairing permissions in the case of updating-failure, but I didn't try that, as I don't want to make things worse.
Is there a way to repair CS5 permissions "internal"?
Thanks in advance,
Philipp

After Effects export as Premiere Pro project weird PAL/NTSC problem

This post is not a question. It's here, because I've found a solution and want to share with You.
I've noticed a strange problem during export from AE to PR.
Ok, here I go.
AE = After Effects CS3
PR = Premiere Pro CS3
My AE project is D1/DV PAL Widescreen. It is a sequence of slideshow with some video effects applied. I needed that sequence in PR. I was happy to find a new feature - export as premiere pro project (new for me - i am pretty rookie ;). Thaks to this feature I have saved most of my disk space that is always to low. But, like every first try, this one was not perfect too. I had two problems.
Problem no 1.
I opened exported project in PR and saw message like "video effect AE.CC COMPOSITE not present".
Whole composition was working perfectly except that one video effect that was fundamental for this project.
*Solution was as easy as it can be. I've just copied that effect from AE plugin folder to PR plugin folder. It worked for this.
Problem no 2
Like says AE Help "When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences."
Project settings in PR was exactly D1/DV PAL Widescreen. So where is the problem You ask?
Therefore why my Timeline works in NTSC 29,97 frame rate if all settings match PAL 25 frame rate?! I don't know.
*Solution to fix this annoying bug is to create a new project in PR with all settings for D1/DV PAL Widescreen in this case. Than just import that PR project exported from AE. Now timeline works like it should in PAL frame rate.
That's it.
I hope this post is helpful, because I didn't find any answer for this here in Adobe forum.
Adam

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

After Effects and Adobe Premiere Pro

I thought After Effects and Adobe Premiere Pro were part of the cloud. Neither appeared in the download manager and I'm not able to install.

This question gets asked a lot because, rather than putting a simple, clear explanatory note into the Application Manager, Adobe confusingly opted to simply omit apps not supported by your operating system from the download screen thereby leaving users such as yourself bewildered as to why those apps are not available for you for download.
Many people often think their Application Manager is somehow broken or corrupted.
I take it that you're running Windows XP 32 bit or Windows 7 32 bit?
Neither will run PP or AE unfortunately so those apps are not available for you to download.
64 bit operating systems only.

After Effects project into Premiere Pro

I am having trouble importing my After Effects project into Premiere. It isn't playing once I bring it in to my premiere.

What versions of After Effects and Premiere Pro? What operating system? What kinds of source footage?
What exactly are you doing? What menu commands are you choosing, and what things are you clicking, and in what order?
Here is a page that describes ways to move things from After Effects and Premiere Pro and vice versa:
"Working with Premiere Pro and After Effects
There are many ways to move things between these applications, but importing an After Effects project into Premiere Pro is not one of them, so I'm confused by your issue as you've stated it.

Fix for crash in After Effects CS5 and Premiere Pro CS5 when Joesoft Hear audio enhancer installed

After Effects CS5 and Premiere Pro CS5 both can crash due to a conflict with the Joesoft Hear audio enhancer.
We've just gotten confirmation from Joesoft that they've released a beta version of Hear that doesn't conflict with After Effects CS5 and Premiere Pro CS5. We're recommending that our customers who also use Hear install the 1.0.5b2 (build 490) beta version of Hear.
Let us know on this forum thread whether this solution works for you. We on the After Effects and Premiere Pro teams will monitor this thread for feedback, and we'll make sure that the folks at Joesoft get the information that they need, too.
When reporting back, be sure to let us know whether you've installed the Premiere Pro CS5 (5.0.2) update and After Effects CS5 (10.0.1) update.

After 2 days trying to get AE and Premiere past the mediacore initialization message, I finally stumbled on this little message. Updating Hear definitely solves the problem!

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Rendering from Premiere Pro Dynamic Link vs After Effects = fast vs slow?

So I'm doing graphics for a show using a fake 3D look in Adobe After Effects CC 2014.1. In segment 1 there are about 30 fonts that display for about 3-4 seconds each. Technically it's just a bunch of 2D layers of text, not a real tricky or intensive thing.
In my Premiere timeline, things render pretty quickly in the sequence. The show is composed of RED R3D 6K files, AJA KiPro quicktime files and some AVCHD stuff. Sequence timeline is 1080i29.97 for broadcast delivery. The sequence is rendering out to ProRes422 HQ. With no graphics, even the RED 6K files render out snappy. So I've brought these new graphics in as a Dynamic Link file. When I try to render out the graphics things get SUPER slow. Inordinately so. I don't get it. I thought the new "Render and Replace" would speed things up (great feature) however that seems to make things just as slow. So now I'm rendering out of After Effects the old fashioned way (each font is a 10 second file or so) with an alpha channel. I chose the 8-bit Cineform codec w/ alpha channel. Things rendered out, as expected, very quickly. A few minutes and all 42 fonts I built were done.
So what I don't get is why render and replace is so much slower than manually rendering straight out from After Effects CC 2014.1. Based on the time stamps from a "render and replace" process I did overnight - it took about 6 hours to render out a handful of graphics. I rendered out twice the amount straight from After Effects CC 2014.1 this morning in like 5-10 minutes. Isn't render & replace basically just rendering stuff out straight from After Effects (or AME) in the background and then just popping it in your timeline? If that's what is supposed to be happening, I don't understand the discrepancy in time. I'll bring the rendered out files into Premiere and see how quickly that video renders over the original video.
I just wanted to throw this out there to see if I'm missing some obvious thing or if this is as expected behavior.
#editorproblems #deliverydeadline

What, exact, version of CC 2014 do you have?
How long have you used AE?
When did this problem start?
Have you tried rebooting your machine?

Exporting from After Effects to Final Cut Pro

Hi
Could anybody tell me the best way to export from After Effects, back in to Final Cut Pro? Do I need to get Automatic Duck for this, if so which one?
Thanks for any help!
Matt

You need to add your composition to the render cue and then export to the same format and codec that you're using in FCP. Automatic Duck is a great tool for getting your FCP or Motion timelines into After Effects but most of the time I simply select a clip in FCP, export it as a reference movie, bring it into AE for processing, then render a file to use as a replacement in FCP.
Search for After Effects Final Cut Workflow and you'll find some more tips including this one. It isn't bad for organization but it misses the point of using the same codec. All my FCP projects are ProRez HQ or ProREZ 444 so that's my choice. Also, if you use the entire shot, which is not a bad idea, then you can use the replace footage option in FCP which is more efficient than the demoed technique of dragging your rendered shot into the timeline and then trimming if needed.
Hope this helps.

Importing After Effects document to Premiere Pro errors: "The importer reported a generic error."

I´m using Premiere Pro CC ver 2014.1. and After Effets 2014.1.1. in OS X Yosemite. I can't import After Effects project to Premiere.
There is always same error message: "The importer reported a generic error."
I have tryed to save After document several different names and greate new ones. Always same error. Whats wrong in my workflow?

Okay so I've searched around most of this forum and as much of Google as I could find - I have found similar problems, but nothing exactly the same; and none of the solutions I've found have worked for me. I've seen a lot of people having trouble connecting to the DL server on the file-selection window, but I don't even get that far - an error message just pops up in the middle of my screen - and my error doesn't mention a server, just that it can't connect to AE DL.
I changed firewall software (which I've wanted to do for months, anyway) and still to no avail.
As for the "The importer reported a generic error" problem also, I can't find any problems or solutions with After Effects files not being able to be imported.

Dynamic Link from After Effects CC to Premiere Pro CC Performance Issues

Similar Messages

Maybe you are looking for