Dynamic Link has no "Export to Encore" option

Good morning.
I'm using Creative Cloud and I have Premiere Pro CC 2014 installed as well as Encore CS6. Both are in the same folder on my storage drive. Both programs work fine.
Only problem is that when I open the Dynamic Link sub-menu (File>Dynamic Link) there is no option for sending the project to Encore. It this normal? I followed the Adobe instructions on installing Encore CS6 via Creative Cloud which was to install Premiere CS6 then unintall but keep the Encore CS6 installation.
Any thoughts?
Thanks.

Thanks again Stan. I have a follow up question then if you can help with that too.
I'm working on a project where the client wants a new DVD on a fairly daily basis which is then reviewed and then changes are made, sometimes to the Premiere sequence. In the past I've used the File>Export>Media interface to directly export to MPEGs-DVD. Haven't been using the Encoder function.
My question is (and I'm assuming the answer is yes) but if I end up having to update the premiere sequence and generate new m2v and wav files when I update that as the timeline in Encore I will pretty much have to rewired the flowchart, yes?
Thanks again sir. You're an angel!

Similar Messages

Dynamic Link Vs. File- Export- Media

I'm probably about to open a can of worms, but could ya'll take a minute and debate the pros and cons of Dynamic Link vs Exporting? As far as I can tell, exporting triples or quadruples the time involved and I need to produce quick results.
And as I am completely new to the Creative Suite and video editing in general, I struggle with the power and depth of the Export options.
Under which scenarios would you choose to export with AME when you can twice as easily import Premiere Sequences as Encore Timelines?
thx in advance

A nice advantage to Dynamic Link is that you can import your assets into Encore and manage the transcode settings there to maximize quality with the given disc space.
For example, if you have 2 hours of material for the DVD, along with menus and such, you can trial-and-error the transcode settings inside Encore to get everything to fit on the disc at the best possible quality.
You can of course acheive the same thing through the proper planning and bitrate calculating...but by using Dynamic Link, you save yourself from that task when you either don't have the time or the confidence to calculate your transcoded asset sizes.
Another nice thing is being able to make changes in Premiere Pro and have those changes updated in Encore. Again, with the proper planning, you can avoid having to go back to your Premiere Pro project in many instances, but it can be very handy to link in a couple of sequences, export a quick Flash DVD project for the client and be able to make any needed changes in Premiere Pro that are immediately imported to Encore.
There are also "Edit Original" functions in Encore, but I have found Dynamic Link to be more reliable.
As for whether it is faster or better quality to use AME over Encore for transcoding assets, I really haven't ever tested that. My guess is that results are probably pretty similar between the two.
I'm not aware of any bugs that exist with the Dynamic Link workflow at this time either, so again, probably going to be similar results between the two.

Dynamic Link (Adobe Premiere Pro to Encore) issues with burning a DVD from the project file

Hello,
I am running Adobe Suite CS 5.1 on my Mac:
2.8 GHz Quad Core
6GB Memory
I've been having issues with a few projects; using Dynamic Link, directly from my project in Premier, to send them to Encore:
When attempting to burn a DVD, Encore will 'hang up' and not burn; I rarely burn to DVD, usually I'm always encoding for web, and just always use the 'default settings' in Encore.
A few things to note:
*In my project I'm using MOV files, from a Canon 7D, and MP4 files, from a Sony EX-1.
*I am working off of 3 separate hard drives; very large projects with over 5TBs of media files.
*I noticed that after inserting a DVD, it caused one of my hard drives to eject; this happened once, as far as I know.
*This only happens when I use Dynamic Link to send to Encore, via my Premiere Pro project file.
*My Project settings are always: XDCam HD-1080p/24p
Please help.
Thanks

So you must downrez at some point in the workflow. Some users have problems and/or think they get better quality out of direct PR/AME exports than using DL for this purpose.
I would test the workflow by creating three short test sequences - one with a clip from one camera, a second from the other, and a third with both in a sequence using the same settings you are using in your edit. I would use the "drag a clip" to the new item method for making each of the first two sequences. By short I mean 30 seconds to 2 minutes with a mixture of still and action.
Export using whatever method you pick of those recommended, but use CBR 8 instead of VBR etc. Bring the resulting files into Encore. Yes, look at the files exported on the computer, and look at Encore preview, etc, but also burn to a disk and watch on multiple TVs. There are lots of issues in best quality.

No "Export to Encore" option in File Export

Hi,
I'm trying to create a DVD from my project, I believe (from the video instructions) that all I need to do is go to File->Export and there will be "Export to Encore".
However, there isn't !
This is a fresh install of CS4 Production Premium and I do have Encore !
Why's it not there and how do I fix this ??
Many thanks,
Jez

What you are looking for is: File > Adobe Dynamic Link > Send to Encore
/Roger

No video of Dynamically Linked asset from AE to Encore

Hi Folks,
I’m working with Adobe CS5 Collection Premium and I experience the following problem with bringing animate assets through a dynamic link into my encore project. I’ll try to explain briefly the issue:
I’m building a blu-ray disc in Encore, which has animated transitions between the menus. These transitions are created in After Effects and brought into Encore via a dynamic link. All the dynamically linked transitions are output correctly in the final disc with the exception of the first-play animated introduction (created in AE) to my main menu – the sound is there but there is no video. There are no issues during the preview of the project in Encore - everything plays just fine and all dynamic links to my animated transitions play ok in Encore. The problem occurs after burning the BD-disc - the video is missing from the intro scene.
Has anybody had a similar issue with dynamically linked assets to Encore projects? I tried bringing the same animated asset via dynamic link with After Effects CS5 and Premiere Pro CS5. The result is the same – the first scene lacks the video. Could it be because my Encore project settings are 20mbps, which causes the blu-ray player to struggle with the first-play animated menu?
Any solutions?

The composition background is transparent. It has per se no color and does not react to blendmodes and such. It's imaginable that Encore resets it to black for whatever reason (wouldn't know, as I design my menus always with full frame backgrounds to begin with). Still, I would consider it a bug regardless, so please fiel away:
http:www.adobe.com/go/wish
Mylenium

Dynamic Linking has stopped working in Illustrator CS6 16.0.4

Dynamic linking no longer appears to be working since the new update to 16.0.4. I have it set in the preferences to ask me if I would like to update when a change is made to a document that is dynamically linked to any AI file.
It just simply doesn't work anymore. It used to be if I had placed a photoshop document in AI, and then had to make an adjustment to the photoshop file, and then saved in photoshop, when I went back to AI there would be a box saying "the document has been updated, would you like to apply the changes to this file?" or something to that effect. Now I get no prompt, and no update happens.

BTW - Mac 10.6.8
And yes it is a linked image that was added using the place command. It shows in the links panel as a linked file. I can click on re-link and it will update, but I have to manually click it as opposed to dynamic linking updating automatically.

Process Server, Dynamic Link, Export and HANG

My joke of the day... what do Adobe and Toyota have in common? Crash! Hey, I'm trying to make light out of a bad situation.
Here's the deal, I edited four straight days on a 12 minute video, at 9:00pm last night I was going to export the video for client review this morning. Media encoder would load the file and then nothing. Now I can not proceed with the edit.
I CAN load the project, but I can NOT save the project. When I save the project it acts like it has saved fine and I can shut down PP without error but when I try to re-load it, PP hangs.
Originally, I thought it was caused by Dynamic Link as in "send to Encore" as seen here: http://forums.adobe.com/thread/543512?tstart=0 so, since then I haven't used Dynamic Link, I just export a video and then load that into Encore to make a quick web version.
This time when I tried to export, I got a "ProcessServer" error as seen here: http://forums.adobe.com/thread/388668?tstart=0 I shut down PP and re-started the machine and PP in hopes of continuing. I also took a look at this thread: http://forums.adobe.com/thread/586853?tstart=0 along the way.
I can't figure out how to proceed. What is weird is that I can load and edit away on the project without any problems, it edits fine. It is only when I save the project and then try to re-open it that it will hang. Could something be corrupting it on "save"?? How can I tell? I have tried save, save as, save a copy... none work.
Vista 64, Core i7 940, nVidia QuadroFX1700, 8Gig Ram, PP CS4.2.1. It is a 24PA widescreen timeline, it is a mix of footage 29.97 DV, Widescreen 24PA DV and uncompressed graphics created in AE. Everything was either captured in PP or saved as Uncompressed out of AE. No HD, no HDV, no MPEG, etc.
The last time this happened, I just re-edited the whole video since it was short. I would prefer not to have to do that this time around.
Any ideas?
Thanks

After more testing, I found that the files that I rendered from AE are all fine. I was able to add them to a project and save, restart and render.
This leads me to believe that the project got corrupted in the process of editing or when exporting to media encoder. As I mentioned the last time this happened, I feel like there is a bug with media encoder or dynamic link that can on some occasions corrupt a project.
Save early, often and with progressive file names. Hope that helps if you are having this problem.

Encore CS6 Dynamic Link from Pr CS6 Problem/Issue

I switched from Production Premium CS5 to CS6. I first deactivated and uninstalled my CS5 then installed CS6 on my Windows 7 machine.
The problem:
When I edit together a video in Premiere CS6 and have finished, I use Dynamic Link from within Encore CS6 to bring in that timeline. After that, I use AME to transcode that Dynamic Link asset to the DVD MPEG standard, Encore CS6 keeps poping up a notification window that says: "The transcoded DynamicLink asset _______ has changed on the server. Would you like to reimport it? Yes/No" It prompts me each time I enter Encore and any time I move from another open program back to Encore.
And I have to click No for each timeline that I have used Dynamic Link for (which is usually 5 or so).
Any ideas or help? This is incredibly annoying.
Thank you.
Jared

As an update. I am using the newest version of PluralEyes (v 2.0.5 7358) to sync the audio of the multiple camera event films I have shot. I have since created a new project in Premiere and only manually lined up clips and then Dynamically Linked that to a new Encore project and so far Encore has not promtpted me with the error/message: "The transcoded DynamicLink asset _______ has changed on the server. Would you like to reimport it? Yes/No"
Any ideas? This is very frustrating. Thank you!

Why Dynamic Link to Encore when CUDA doesn't help Encore?

Ok, so I just finished cutting together a 90 minute video and used Dynamic Link to bring it to Encore. My source files were AVCHD and HDV mixed, so Encore had to transcode them. I attempted to do a transcode before burning, and got all the way to 99% in the transcode when I got an error message saying that I couldn't transcode the file because it was open in another program (I had closed PPro, but apparently it was still open?). Anyway, I tried hitting "build" and got the same error, again at 99%. So I went back to PPro and used it to export an mpeg2-dvd file which I then imported into Encore and burned to DVD.
Now, though I would appreciate some suggestions as to the source of my error when transcoding with Dynamic Link, that's not the root of my post... here it is: I'm not likely to use Dynamic Link again when Encore's (failed) transcode took nearly two hours for my 90 minute video, while doing a direct export from Premiere took only 40 minutes. I can only assume that the difference in time is because PPro is a) 64 bit, and b) can take advantage of the CUDA (I did all my CC and transitions using CUDA effects). Until Encore hits 64 bit and can take advantage of CUDA, I doubt I'll be using Dynamic Link again... anyone have any insight or comments?

I'm not sure that the information is correct. Test project with dynamic link from PR to EN. I right-clicked and picked transcode now. Using windows task manager processes, the only programs using cpu are encore (60-80%) and premiere (10-20%). I happened to have AME open, but it was using zero.
I do not have a CUDA card, but I don't think it matters for this test.
I thought we had been told (probably in CS3 or CS4) that Encore was using ame, but this doesn't look like it. What engine is actually doing the EN transcoding? It certainly appeared to be running internally to Encore. Is there any difference in how Encore is transcoding between using "transcode now" versus transcoding through "build"?

Encore constantly crashes using dynamic link....

Not sure what's going on here, but I just wanted to see if anyone knew what was going on. For some reason when I use dynamic link from Adobe Premiere to Encore it constantly crashes immediately.
The project is just over an hour long with loads of edits.
Thanks

DStrange,
Thanks for reporting that. It can solve some "DL crashes Encore" problems.
Rookie, a first step (which you may have done) is to see if Encore can be opened on its own, do basic functions (e.g. add a menu from the library etc). If yes, then look at whether it is only the one Premiere sequence, etc.
And, yes, try DStrange's solution. You don't have to add chapters to see if works. Chapters are one of the thinks that can cause issues, so a no-chapter version is a good troubleshooting step.

How to get Adobe Dynamic Link update?

I have finished few project with Adobe Dynamic Link but my last project has given me some run around, I have notice the Adobe Dynamic link has not been updated when updated my Premiere sequence. (I use the Sequnce for the timeline from Premiere) Is there a way to refresh the Adobe Dynamic Link so my Encore Project has the latest sequence. Thanks for your input.
Wayne

Try this:
http://forums.adobe.com/message/4052001#4052001

Dynamic Link Stops Importing

Windows/PC - Encore CS6 - Premiere Pro CC - Creative Cloud Subscriber
I'm trying to use Encore to create an ISO image. I've created the sequence in Premiere Pro, spec'ing In/Out and Chapter Marks.
Using Adobe Dynamic Link to import sequence to Encore, but about a third of a way into the import, the status bar stops, and the software does nothing. It does not appear to be locked up, just stuck. Any thoughts as to how I can get Encore to finish importing?
- Matthew

You cannot DL between mixed versions: Encore CS6 will only DL with PR CS6 not PR CC.
Workflow option:
Using Premiere Pro CC & Encore CS6 for Bluray, DVD, and Interactive Video for iPad,ATV, and Mobile HD | DAVTechTable | A…

Dynamic Link from Premiere freezes at 50%

I have never used the dynamic link from Premiere CS4 to Encore CS4 so I don't know if this feature has ever worked. I tried to send just a 25 minute unedited timeline to Encore to see if it worked. Encore goes through it's features but freeze at 50% at transporting timeline. Any ideas?

I may have answered my own question. I finually did get it to work, maybe by chance. I msconfig and cleaned out my start up menue and that seems to have cured it.

I am not seeing export to Excel option in SharePoint 2013 survey (even in the overview view mode)

Hi
If anyone could point me in the right direction as to what steps to take to enable the export to excel option in a sharePoint survey list.
all other surveys are showing up that export to excel option.
I am not seeing the view dropdown as well which shows up on right (the only way to create new view is through the URL as of now)
Constraints
Survey already has several responses now so making a new survey is not an option
(I know that when is any custom view is changed to default view and if Overview is made as the default view again this option goes away, but how to get this export to excel option back?)
Steps taken till now
Checked in SP designer as to which field is set to default and it shows overview as the default.
Checked whether any web part was closed and it seems there was none else closed web part category would've shown up
Saved the existing survey as template both with the content included and without the content (without the content template has the export to excel option showing up)
Many thanks ,
Ab

Aby,
Do following, it will work
Create a simple list and hit export to excel to create owssvr.iqy file
Open that file in notepad
Collect Survey list' GUID and View GUID from SPD. You need to change the pointer to test list to survey
Change list GUID and view Guid
File will contain these code
WEB
1
https://mycomp.sharepoint.com/sites/RND/_vti_bin/owssvr.dll?XMLDATA=1&List={577F5EF1-DA61-4BAD-B912-E16CEFD72AE2}&View={05CF5C6B-92F0-4681-BC4A-F60E2646A41D}&RowLimit=0&RootFolder=%2fsites%2fRND%2fReports%20List
Selection={9CC32EE5-7C16-49EE-9BA1-136C1ADBEBEF}-{2D172036-F4BF-459D-BBAB-4FEE3310511D}
EditWebPage=
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False
SharePointApplication=https://mycomp.sharepoint.com/sites/RND/_vti_bin
SharePointListView={05CF5C6B-92F0-4681-BC4A-F60E2646A41D}
SharePointListName={577F5EF1-DA61-4BAD-B912-E16CEFD72AE2}
RootFolder=/sites/RND/Reports List
It will work :)
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Dynamic Link in CC

Dynamic link is greyed out in CC? Do I need to activate it in come way.

If you are writing about DL to Encore... there is no EncoreCC so no Dynamic Link
CS6 is the final Encore http://www.adobe.com/products/encore/faq.html
-also http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

Dynamic Link has no "Export to Encore" option

Similar Messages

Maybe you are looking for