Dynamic Link in CC
Dynamic link is greyed out in CC? Do I need to activate it in come way.
If you are writing about DL to Encore... there is no EncoreCC so no Dynamic Link
CS6 is the final Encore http://www.adobe.com/products/encore/faq.html
-also http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/
Similar Messages
-
firefox did a restart now it wont open, i get the following message,
The procedure point js_UnwrapObjectAndInnerize could not be located in the dynamic link library
have tried system restore but this didnt helpDo a clean reinstall and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a fresh copy of Firefox.
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Dynamic Link does not open Project on 2nd computer
Has anyone run into this situation?
Creating a Premiere ver CS6 project on the mac and creating a dynamic linked comp in Premiere to a After Effects comp works well until the project file is shared with another computer that did not create the project.
When the files are opened on another MAC, same CS6 version the Premiere project will not open. It cannot find the linked comp. It will NOT open the project file what so ever! I go back to the original computer that created the project and render out the AE linked comp files and import them as movies by replacing the dynamic linked comp files then resave the project. (Note: I have not deleted the comp files in the project, only on the timeline). I then try to open the files from the other computer the Premiere project will still NOT open. Again, back to the original computer that created the file, open the project and DELETE in the project pane any files that are AE linked comp files, even though they are NOT being used now in the timeline, resave the project, now the project will OPEN on the other computer.
All these files are on a standalone portable drive, the Premiere project scratch files are all specified to be on this standalone drive as well when the project is opening. It seems if any file is a "Linked comp file" and is not opened on the computer that created it, it will not open the project file. It does not act like a misplaced, missing file that it will ask you to located the file, or will still open the project regardless if it cannot find the file(s).
if your sharing project files or getting a new computer and try to open up a project file from the previous computer with linked comps you will NOT be able to do so. This has been my experience so far with CS6 on the Mac.
Regards
StevePlease don't double-post. Duplicate post deleted.
-
Dynamic Link... My Question Disappeared?
I tried to import a video to Photoshop CS6 Extended, in order to export it as an animated gif.
I posted a question about it here, it appeared in 'trending' and then disappeared ! Did a moderator move it?
My question was... when I tried to import I got a message error to say "Dynamic Link missing...'
Can anyone help?Your question was moved over to the Photoshop forum here http://forums.adobe.com/message/4413189#4413189.
You can always find all of your posts via Your Stuff > Discussions from the menu. So in your case http://forums.adobe.com/people/KieranBrennanDublin?view=discussions. -
Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?
Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear. -
Adobe Premiere Pro and After Effects CS5.5 Lagging Horribly with Dynamic Link
I just bought a brand new computer. It is a beast
Windows 7 64-bit
Intel i7-980 6 cores with HT = 12 CPU cores
Nvidia GTX 570HD 1280mb 328 bit
120gb SSD sata 3
600 gb Velociraptor drive 10000rpm
8gb DDR3 1866MHZ ram
So you would think I would get no lag. But for some reason, when I edit in premier pro or after effects, especially when I use dynamic link with premiere and after effects. It lags realllllly badly. I am talking about 5fps and I have to pause and wait like 20 secs then hit play again to get 5 secs of smoothness and then the laggyness returns. I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264. I tried messing around with all the settings but I cannot get anywhere. Anyone know what the problem might be? I don't have any other programs running since I just installed these. This lag is really holding me back and I cannot edit properly because of it.Your memory is ill configured, since you are using it in dual channel mode instead of triple channel mode and 8 MB is about bare minimum. You would be better off if you were to increase memory to 24 GB. Secondly, your disk configuration is the absolute minimum requirement, so adding a couple of disks will help performance as well.
I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264
Mistake. It is one of the most demanding codecs on the market. Look here: Adobe Forums: System requirements for CS5
You could try the PPBM5 Benchmark to see how well your setup performs. -
After Effects CS5.5 will not open a Dynamically Linked Premiere Pro sequence in the comp. window
Hi all,
I'm trying to export a Premiere Pro sequence which is in 2K and the footage has been shot as RED 5K. Adobe Media Encoder will simply not work as I am having the quite widely discussed issue where it will just 'hang' at certain points and not complete the export.
The most popular solution to this problem is to export via the Render Queue in After Effects instead. However, therein lies the problem.
I go onto After Effects. Choose File -> Dynamic Link -> Import Premiere Pro Sequence.
The box pops up, I choose the Premiere Pro Project File then select the sequence I want to export. It then appears in the After Effects project panel window like so:
However - when I try and drag this to a new composition window, one of two things have happened. Either A) nothing happens (literally, NOTHING changes) or B) as the following example shows, it seems to add it to a new composition, but the video is entirely black. I have tried rendering it and it just produces a black video.
The other thing people seem to suggest is to just import the entire Premiere Pro sequence into After Effects. I've tried this, but any titles I have added in PP force the video to fade out then back in, in the place where the title should be?? So I can't export the video this way either.
My system is as follows:
Thanks massively in advance for any help that is provided!This is months old but I'm now having the same problem with AE and Premiere CS6 after updating last night: Dynamic linked sequence shows up in the project window in AE and even plays video if previewed, but will not drag or alt-drag into any comps, including a new comp (makes a new comp with matching settings, but empty).
Furthermore, I do actually have an earlier version of the same sequence placed in one of my AE comps, which I think was done using the same steps just prior to updating the apps last night. Did this break?
I'm a little concerned since the biggest reason I'm trying to use premiere is to eliminate the exports when adding graphics in AE. -
2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.
This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.
-
Dynamic link confusing two separate AE compositions in PPro from different projects
I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
Any help with ths problem would be appreciated,
JThanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
Date: Mon, 24 Oct 2011 19:47:03 -0600
From: [email protected]
To: [email protected]
Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
Re: Dynamic link confusing two separate AE compositions in PPro from different projects
created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Can someonee please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra software. My software other than that problem works fine.
Couldn't complete what request? Way more information please.
What operating system? -
Hi,
Since downloading the updated version of itunes around May this year I have had the following problems:
1. This error message appears when my windows account launches:
the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
You can guess that I am not a very happy bunny with itunes at the moment!
Please, can anyone suggest how to sort this lot out. I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library. I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
Thank you for your time.
MichelleThank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle -
How to create a dynamic link in a Form to link to a specific FOLDER
Hello,
I have created a reports of all employees of my department.
This reports shows me the empno and ename
When I clicked on a empno ( for example empno = 1 ) then then I got a MASTER DETAIL FORM about that employee(empno = 1) .
Who he or she is and which course he or she had followed.
I want create a dynamic link in the MASTER DETAIL FORM which shows me directly the folder of that employee ( in this example folder 1 ).
If I clickt on the report with all employees of my department on an other number ( for example empno = 3333333) then if I click on the dynamic link in the MASTER DETAIL FORM I want to see the folder of employee 3333333 !!! You know what I mean ?
What I want to know is, how to create a dynamic link that shows me directly a folder which is dependent on which empno I had clicked on in the report ( report with employee numbers and ename )
Is there any way to pass some parameters into a link to a Folder ? Is this possible in Portal ? Does anyone know how to do this, or do you have a suggestion how to solve this problem ?
Thanks a lot !!!
Chu LamHi Chetan,
I am glad that someone had replied on my question.
I will explain it to you again.
I have created a report that shows me all employees. If I click on a employee number then I get an MASTER DETAIL FORM on my screen with all the information(where he works now and which number I have to dial ifhow can I reach him by telephone) of that employee on which number I clicked on.
I really like this mechanism. (You click on a number and the information that you see in the next screen is dependent of the number you clicked on ! )I have created all this. It works fine.
What I want is to expand this example.
Every employee has a FOLDER (yes, those ones in Content Area ) which they can insert text or image into that folder. The folder name is just the employee number. ( employee with employee number 3303, he owns a folder which is named 3303 and an employee with empno 9999, he or she owns a folder with the name 9999. )
Every employee can tell more about himself in that FOLDER by iserting text and images. For example : What he likes, pictures of his vacation, something like this.
What I want is this :
If I click on the first report,which provides me all employees on screen, on a employee number 3303 then I get a Master Detail Form on my screen with all information about that employee with employee number 3303. And I want in this MASTER DETAIL FORM to create a link that shows me directly the FOLDER of that employee ( 3303), so I can learn more about employee with employee number 3303. But I don't know how to create this link.
That link had to be dependent on the employee number. The difficult thing about this link is that this link had to be dynamic.
I hope this will make it clear to you :
(report all employees:)
empno ename
3301 john smith
3302 peter clark
3303 wilson jones
If I click on a empno ( for example 3303) then I get a MASTER DETAIL FORM which provides me information.
(MASTER DETAIL FORM )
EMPNO 3303
ENAME wilson jones
department New York
mobile number 98908763
Company tel. no day
AOL 097485838 monday till wednesday
Oracle 04848584333 thursday and friday
LINK
(what I want is to create a link here )
If I click on LINK in this MASTER DETAIL FORM then I want to link to the FOLDER of this employee ! ( In this example it is FOLDER 3303.
BUT IF I CLICKED ON THE FIRST REPORT ON A DIFFERENT NUMBER ( FOR EXAMPLE 3301) THEN IF I CLICK ON LINK IN THE MASTER DETAIL FORM THEN I HAVE TO LINKED TO FOLDER 3301.
I just want to know how to make a link like this ( create a dynamic link to a specific folder ).
Thanks in Advance.
Chu -
CS5.5 Production Premium Dynamic Link error
I have trial CS5.5 Production Premium. I'm trying to dynamic link premiere pro to after effects but error "Using Adobe Dynamic Link with Adobe After Effects requires Adobe Production Premium". I already instal Production Premium.I reinstall but still ongoing. I need a solution.
Try using a Forum search or a Google search - 'Using Adobe Dynamic Link with After Effects requires Adobe Production Premium' was quite common error. Deactivating and reactivating the Suite resolved the issue in most cases.
-
Overriding automatic replacing of AE projects with incremental file names in Dynamic Link (CS5.5)
Hi everyone,
I've been searching all corners of the internet for an answer to this question including this forum and the Adobe help documents, so I apologize in advance if this question has been asked before.
First off, we're using Premiere Pro CS5.5. We have recently switched from a FCP6 to a Premiere workflow and we're really enjoying the Adobe Dynamic Link feature. Unfortunately, we've discovered a bit of a problem with our workflow.
All our AE projects are named something like "heb_alef_01.aep", "heb_alef_02.aep", "kor_hhh_01.aep", "kor_hhh_02.aep". These don't correspond to different versions of the same videos, but rather ...01.aep is video #1 and ...02.aep is video #2.
You can probably see how this causes a problem when it runs into Premiere's feature of automatically updating project files if it finds an exact filename match in that directory with a higher number at the end. If I try to import "kor_hhh_01.aep" it will instead give me "kor_hhh_02.aep", for example.
I noticed that in CS6, a checkbox has been added to the Preferences pane which will prevent this from automatically happening, but I wanted to know if any options exist for Premiere CS5.5 users. If necessary we can adjust our file naming structure, but I really didn't want to deal with the far-reaching implications of that if possible.
Thank you in advance for any help you can offer.Are each of these different AE project files pointing to clips within the same Pr project? (Seems like that may be the case..?) If so, it is highly recommended to only have 1 AE project per Pr project, and just have that include all of the comps corresponsing to the clips in Pr. Then, when re-opening the Pr file, click on "edit original" on any of the DL clips which will open your AE project, and any subsequent DLs that you send over will stay in your original AE project.
Disregard if I mis-read your problem and my advice is irrelevant. -
Please help
Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?
-
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update.
Maybe you are looking for
-
Is it possible to change the column headings when ever i execute the query
in the runtime i want to change the column headings is that is possible. Ex: if write a timestampadd(.......) function in the table heading is that change the dates automatically whenever i execute the query? is this is possible? Product name 1-2-10
-
I have a 4th generation 8gb touch can i trade up to a 32gb?
I have a 4th generation 8gb touch can i trade up to a 32gb?
-
When trying to change an Sales standard order for a material, system is showing a message that "Financial documents : No financial document assigned" . What is this message means ? Moderator: Please, avoid asking basic questions
-
I am getting no sound out of my system since I installed a new wireless network card. I have checked for conflicts (none) and have reinstalled the sound card, but nothing works. I have a Li've! 5. Value card on my Win XP Professional system. I checke
-
I have installed Flash Player 12 on MAC OS 10.9 using Safari, images and video don't load.
I have installed Flash Player 12 on a MAC OS 10.9 using Safari. The system will not load images or video. I have used the website help documents to verify that the Flash Player files are installed and the Safari security settings are correct. Help pl