Dynamic link in Encore to get AE project, bluray, after transcoding, file still shows untranscoded

Hi,
I have an After Effects file. I have several comps that are 1920x1080 at 29.97 drop frame. When I go to Encore, I use, Import After Effects Composition and import several compositions from my AE project. I've tried using both Automatic transcode settings and I've tried to set the settings myself. When I transcode, Encore goes through the motions, but when it's done, the file still shows "Untranscoded". I have checked the project folder and confirmed that the transcoded files are indeed there, but Encore still shows them as untranscoded. What is going on?
Thanks,
Stan

Hi,
Transcod your comp in AME. Choose H.264 Blu-Ray if you have more than 2 hours videos.
Bye
Steph

Similar Messages

  • Adobe pr pro cs4 dynamic link to Encore cs4: updating changes made to pr pro timeline

    Recently I did a project in adobe pr pro cs4 and exported it to encore through adobe dynamic link to create a DVD. When I saw some mistakes, I went in pr pro and corrected them. It automatically updated the chages in encore. Finally, I created my DVD and burned it. Next day, I saw a minor spelling mistake so I opened pr pro and encore separately but any corrections I did in pr pro did not updated in encore!  What is a better way to correct this as I do not want recreate the whole DVD project again by sending it again through adobe dynamic link?

    You have to go into Encore and select Revert to Original for your Linked timeline.  Any changes made after transcoding won't show up without reverting.  And yes, that means you have to transcode again.

  • PPro Dynamic Link To Encore (File Allocation)

    Hello all,
    First, I've just started using PPro CS5 and what a treat it's been.  Thanks to the Adobe team and to the regulars in the Hardware Forum for all the help.
    If my work flow is:  Assets > Edit In PPro > Dynamic Link to Encore > build IMG... then what would be the best way to spread the files across a 4-drive system?
    System
    -  W7-64 bit, Prod Prem with PPro 5.0.1 (and now 5.0.2 as of last night)
    -  i7930 OC 3.4GHz (water cooled)
    -  Asus P6T SE
    -  12GB RAM
    -  GTX470 (with hack, but no longer needed after last night )
    -  Coolermaster Haf X
    -  Antec 1000W power
    -  C:  OS and programs (150 GB Velociraptor)
    -  F:  PPro project and source files (captured videos and music) (F3)
    -  G:  PPro media cache, preview files (F3)
    -  H:  "masters", page file (18 GB) (F3)
    -  no option to Raid (will most likely happen in the distant future)
    -  DVD-R, BD-R
    -  so far this system is "fast" and stable for me.  Loving it!
    Project
    -  DV > DVD (basic editing with no files or apps applying out-of-the-ordinary tasks)
    -  Future Use:  HDV > BDR (basic editing with no files or apps applying out-of-the-ordinary tasks)
    Thoughts
    -  I'm fairly confident in my PPro allocations after reading Generic Guidline For Disk Setup (http://forums.adobe.com/thread/662972) but always looking to tweak and improve.  This is more with the addition of Encore to the mix.
    -  I'm thinking the Encore files would go on G and the IMG file would be kicked out to H.  But if Encore makes heavy use of the media cache and previews on G, then maybe the Encore files and IMG should go on H.  Opinions?
    -  Any better way to allocate the files?
    -  Any suggestions on my page file size/location?
    These initial projects are also my way of fine-tuning my new work flow, computer configurations/settings,
    Thanks,
    Erik (Pyramid Pyro)

    When you dynamic link to Encore, you send it nothing really: it opens an instance of the pproheadless which gives Encore what it wants until it is time to transcode it, and then it compresses the PR sequence using the Encore settings you set for the project and for that sequence (ones like the ones Encore tells you it can't load). So yes, it matters.
    Has Encore CS5.1 (the version that is part of PR CS5.5) worked for you before?

  • CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there

    CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there a way around this?  Is there a patch to correct it?

    To build CD's???
    What problem does Encore have with DL?
    If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

  • I can't find the adobe dynamic link to encore in premiere pro...?

    New to encore and dynamic link... I'm running Premiere Pro CC and Encore CS6.  When I go to send my sequence to Encore (File>Adobe Dynamic Link>..), there is no "Send to Encore" like what I've heard in seen in the tutorials... any ideas?
    I've also tried to dynamic link from encore to premiere pro, but it never loads the sequence.

    a workaround for the Cloud http://blogs.adobe.com/davtechtable/
    -http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
    -http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

  • HT2731 How can I change my store to US, now that I am in the US? A link in a previous thread says not accessible as the profile still shows different country..

    How can I change my store to US, now that I am in the US? A link in a previous thread says not accessible as the profile still shows different country..

    As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
    Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

  • Premiere Pro CS4 dynamic link to Encore CS4

    I'm a newbe and I have a fundamental question about the Premiere Encore workflow. When I edit a project in Premier and I use the File>Dynamic Link>Send to Encore command, I get "Start New Project" from Encore. How do I update the edits I did in Premiere to a current project in Encore? Is there a way to Dynamic Link Premeire edits while I'm in Encore?

    I have the exact same problem. I linked them together, but when I made the change in Premier Pro, the changes did not update in Encore. Everything
    I read and watch on Adobe says it will happen automatically, but I'm not seeing it happen. Is there any way to replace an existing timeline in Encore with its updated sequence in Premier?

  • Using Dynamic Link to Encore -- Can't do it in PP CC?

    This is the dumbest thing I've ever heard of.  Surely I have it wrong.  Premiere Pro was upgraded to CC two years ago, but I cannot use the Dynamic Link to create DVDs.  I can use my Premiere Pro CS6 to use the dynamic link to get my sequences in Encore CS6, but because there is no upgrade to CC for Encore, I can't use the dynamic link (with PP CC).
    Are you freaking kidding me?   What's the point of coming up with this amazing Dynamic Link if you can't use it anymore?  Somebody is really nuts here in the development of PP CC and lack of development for Encore.
    Am I missing something?  Should I be building my DVDs in a new CC program that I'm not aware of? 

    >lack of development for Encore
    Adobe was FORCED to stop development, see #8 here for why http://forums.adobe.com/thread/1337952?tstart=0

  • Dynamic Link to Encore from Premiere Issues

    I created a simple After Effects composition and Dynamic Linked it to Premiere Pro. (All CS4 Programs)  I completed the editing process, and Dynamic Linked my timeline into Encore.  In Encore, the Premiere Pro timeline appears, but it does not represent the After Effects composition within the Premiere Pro Timeline.
    I am unsure as to why this occurs.
    Also, I have issues with getting the DVD's I burn to play in other computer/DVD players.  The discs I create work perfectly fine in my computer, as well as my DVD player but I am unsure why they do not work in other people's devices.  The discs are DVD-R discs.

    So you must downrez at some point in the workflow. Some users have problems and/or think they get better quality out of direct PR/AME exports than using DL for this purpose.
    I would test the workflow by creating three short test sequences - one with a clip from one camera, a second from the other, and a third with both in a sequence using the same settings you are using in your edit. I would use the "drag a clip" to the new item method for making each of the first two sequences. By short I mean 30 seconds to 2 minutes with a mixture of still and action.
    Export using whatever method you pick of those recommended, but use CBR 8 instead of VBR etc. Bring the resulting files into Encore. Yes, look at the files exported on the computer, and look at Encore preview, etc, but also burn to a disk and watch on multiple TVs. There are lots of issues in best quality.

  • CS4 Premier Pro Dynamic Link to Encore Question

    I have DL'ed (Dynamic Linked) a project in PP CS4 to Encore CS4 and it worked just fine except that in the sequence in PP CS4 I edited some of the audio tracks with render and replace using Sooundbooth CS4. The audio effects I added in Soundbooth CS4 played back as encoded in PP CS4 on the time line but not in the final product from Encore. 
    What would have caused this?  Can added effects in Soundbooth be DL to Encore CS4 or do I have to render out in PP CS4 then pull the assets to Encore?
    Much thanks in advance for assistance.

    I don't believe that any of the effects I wanted to apply in SB were
    actually applied but there are other cuts and edits I would not want to
    loose by re-applying the clips to the timeline.  Are you saying that the
    edits would remain in tact and that theoriginal video and audio with
    edits would be replace?  Also, you should know that some of the final SB
    effects that I added (which were not added to the audio clips) contained
    other SB effects that were retain and had to do with filtering noise and
    very lager gain adjustments which I would NOT want to loose just to
    recover the more subtle effects lost in the last SB effects I wanted to add.
    So my concerning is replacing what is on the time line now with raw
    files in the project panel.
    Does that help in explaining my concerns?
    Thanks again!!

  • Why Dynamic Link to Encore when CUDA doesn't help Encore?

    Ok, so I just finished cutting together a 90 minute video and used Dynamic Link to bring it to Encore. My source files were AVCHD and HDV mixed, so Encore had to transcode them. I attempted to do a transcode before burning, and got all the way to 99% in the transcode when I got an error message saying that I couldn't transcode the file because it was open in another program (I had closed PPro, but apparently it was still open?). Anyway, I tried hitting "build" and got the same error, again at 99%. So I went back to PPro and used it to export an mpeg2-dvd file which I then imported into Encore and burned to DVD.
    Now, though I would appreciate some suggestions as to the source of my error when transcoding with Dynamic Link, that's not the root of my post... here it is: I'm not likely to use Dynamic Link again when Encore's (failed) transcode took nearly two hours for my 90 minute video, while doing a direct export from Premiere took only 40 minutes. I can only assume that the difference in time is because PPro is a) 64 bit, and b) can take advantage of the CUDA (I did all my CC and transitions using CUDA effects). Until Encore hits 64 bit and can take advantage of CUDA, I doubt I'll be using Dynamic Link again... anyone have any insight or comments?

    I'm not sure that the information is correct.  Test project with dynamic link from PR to EN.  I right-clicked and picked transcode now.  Using windows task manager processes, the only programs using cpu are encore (60-80%) and premiere (10-20%). I happened to have AME open, but it was using zero.
    I do not have a CUDA card, but I don't think it matters for this test.
    I thought we had been told (probably in CS3 or CS4) that Encore was using ame, but this doesn't look like it.  What engine is actually doing the EN transcoding?  It certainly appeared to be running internally to Encore.  Is there any difference in how Encore is transcoding between using "transcode now" versus transcoding through "build"?

  • In Win 7 64bit I get the following error upon every reboot.  "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library "    This happened yesterday, 8/23/2011 after downloading Apple iTunes 10.4.

    This happened yesterday, 8/24/2011 after downloading Apple iTunes 10.4. In Win 7 64bit I get the following error upon every reboot.  "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"    Please how do I fix this, Thanks.

    In the case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • Dynamic Link with Encore, Photoshop, and After Effects

    Intention 1: Im using Photoshop CS5 (PS5) & After Effects CS5 (AE5) to create a DVD menu for Encore CS5 (EN5). I used the 'Film & Video' preset in PS5 to make a standard HD 1440 x 1080px image size; which looks the same in AE5. My problem is in PS5 the 'Pixel Aspect Ratio Correction'  size is the size i want the universal size to be. Its a more stretched version which looks better to me, but may not work well with HD monitors (as this DVD will be played on a 17" laptop).
    Question 1: Is there any way to have AE5 recognize the 'pixel aspect ratio correction' from PS5 and make the composition settings that size in AE5?
    ```
    Question 2: What are standard sizes for computer monitors that would work welll mostly with the Dynamic Link in AE5 and EN5 working with PS5?

    Yes, it can be very confusing. With CS5, however, as long as you keep it all the same, it doesn't require setting. But you do need to understand it.
    Just start with the help page:
    http://help.adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103906c6dea-7f3aa.htm l
    FYI, you may have seen these, but if not, help re Encore menus using AE:
    From Encore help:
    http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
    From AE help
    http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7e45 a.html

  • The procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll   . I got this error after downloading and installing Frame MAker 12. My system os is service pack 2.

    The above mentioned error is displayed when i open Adobe Framemaker 12 after installing it.
    the procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll
    this is the error.
    my os is windows service pack 2
    2 gb ram

    You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
    FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
    Also, 2Gb of RAM is a bit lean for FM.

  • When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I redownload itunes, but the problem still persists.  How can I fix this?

    When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I tried to fix this problem by redownloading itunes, but the problem still persists.  How can I fix it?  thank you.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

Maybe you are looking for

  • How to restrice ananymous user access to portal link /irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?

    Hi experts, We had an issue with portal access. I wonder if portal is venerable for security threats? Could you please let me how to restrict the unauthorized users (anonymous user) to the portal URL. https://HOST:50001//irj/servlet/prt/portal/prtroo

  • Importing trouble from 7.1.5 to 9.1.5

    I am having a really hard time getting iPhoto library from G4 power mac to new Mini. I tried the portable HD to copy and import but on the mini I cannot select the library. I also tried to move it over on the network (wireless). The library is about

  • SQL Help for a computation

    Hi I am trying to create a Stock Market Technical Indicator named - Commodity Channel Index (CCI) Date  High_Price     Low_Price     Close_Price     True_Price     TPMA     MD 02-Jan-07     2297     2238     2273     2269                03-Jan-07    

  • How to merge data returned from server after you hit SUBMIT button

    I have a PDF form with blank ID field. When user click Submit button on the form, an ID will be generated from database on the server side. How do I merge this ID with client's original PDF from so he knows his ID number? Any help thanks.

  • 20.1-Inch External Monitor

    I'm looking at buying a MacBook Pro later this summer, but I'm interested in buying a new 20.1-Inch monitor in the next week and I want to know which one is better. I will use it for gaming and video playback and once I get my MacBook Pro the monitor