Dynamic link not working for CS6 on Windows 8

I'm trying to import video frames to layers, but it keeps saying that the dynamiclink isn't available! And I have a windows 8 laptop.

Refer to this:
Could not complete your request because the DynamicLink Media Server is not available.
Mylenium

Similar Messages

Dynamic link not working for Media Encoder

When I put one or more timelines in que from PP CS6 for export and then start the cue all I get is a message saying it is opening dynamic link but it just stays at that point and does not actually start the export process. What can cause this? Thanks for your help.

Use the uninstall scripts from Adobe to completely remove all vestiges of PPro from your computer. Then perform the installation.
Links to the scripts are on the troubleshooting page.
Cheers
Eddie

Dynamic Link not working in CS6

I'm working on a Mac on OS 10.7.4, dynamic link between Premiere Pro CS 6.0.2 keeps hanging up and won't successfully launch AE. Just to see if it was the individual project, I launched a new project and tried to link a single file and it did the same thing. I don't know if this is a preference thing or what, but any guidance is much appreciated.

Refer to this:
Could not complete your request because the DynamicLink Media Server is not available.
Mylenium

Dynamic link not working for PPCS4 after installing CS4

Background. I had CS3 Master Collection. I then needed some features in PPCS4 so I purchased that as a standalone upgrade. Recently I decided to upgrade the entire suite to CS4 Creative Suite 4. Everything installed fine. However when I try to go from PPCS4 using Dynamic Link I get a message that says Adobe Dynamic Link requires Adobe Production Premium (which I have). I assumed I needed to delete PPCS4 and I went so far as to delete the entire CS4 suite + the Premiere Pro and start over. Again, it installed fine but the same problem happens all over again.
Is there some config file somewhere or registry tweak so I can use dynamic link? I am on Vista 64 machine.
Thank you - Pat

Use the uninstall scripts from Adobe to completely remove all vestiges of PPro from your computer. Then perform the installation.
Links to the scripts are on the troubleshooting page.
Cheers
Eddie

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From: Colin Brougham <[email protected]>
To: Dan Seanor <[email protected]>
Date: 03/15/2011 09:55 AM
Subject: Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

Search Bar is not working for me in windows 7 32 bit OS

Search Bar is not working for me in windows 7 32 bit OS'''bold text'''

Hi Sameer,
There's no version of Windows Vista that is supported, regardless of service packs. You can always upgrade to Windows 7, though.
Your other option is to use Brackets, the open source editor that Edge Code is based on. It still supports Vista for now. The downside is that Brackets lacks some features of Edge Code: Kuler integration, Edge Inspect integration, and Edge Web Fonts code hints -- although all of those except Kuler are offered as optional Brackets extensions too (you just have to install them).
Hope that helps,
- Peter

Photoshop extension building not working for cs6, works for the rest

I am building an extension for photoshop the manifest file is as below:
<?xml version="1.0" encoding="UTF-8"?>
<ExtensionManifest Version="4.0" ExtensionBundleId="Kit" ExtensionBundleVersion="2.0.0"
ExtensionBundleName="Kit" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ExtensionList>
<Extension Id="Kit.extension1" Version="2.0.0" />
</ExtensionList>
<ExecutionEnvironment>
<HostList>
<Host Name="PHSP" Version="[13.0,15.9]" />
<Host Name="PHXS" Version="[13.0,15.9]" />
</HostList>
<LocaleList>
<Locale Code="All" />
</LocaleList>
<RequiredRuntimeList>
<RequiredRuntime Name="CSXS" Version="3.0" />
</RequiredRuntimeList>
</ExecutionEnvironment>
<DispatchInfoList>
<Extension Id="Kit.extension1">
<DispatchInfo >
<Resources>
<MainPath>./index.html</MainPath>
<ScriptPath>./Kit.jsx</ScriptPath>
</Resources>
<Lifecycle>
<AutoVisible>true</AutoVisible>
</Lifecycle>
<UI>
<Type>Panel</Type>
<Menu>Beauty Retouching Kit</Menu>
<Geometry>
<Size>
<Height>580</Height>
<Width>250</Width>
</Size>
<MaxSize>
<Height>580</Height>
<Width>250</Width>
</MaxSize>
<MinSize>
<Height>580</Height>
<Width>250</Width>
</MinSize>
</Geometry>
<Icons>
<Icon Type="Normal">./pictures/thumb/Icon.png</Icon>
<Icon Type="RollOver">./pictures/thumb/Icon.png</Icon>
<Icon Type="DarkNormal">./pictures/thumb/Icon.png</Icon>
<Icon Type="DarkRollOver">./pictures/thumb/Icon.png</Icon>
</Icons>
</UI>
</DispatchInfo>
</Extension>
</DispatchInfoList>
</ExtensionManifest>
I tried this code for photoshop CC and CC 2014, it works for both but I couldn't get it to run for cs6 it gives the below error from the extension manager:
so isn't Version="[13.0,15.9]" correct? why would it not work for cs6? thanks in advance.

Hi,
CS6 doesn't support HTML Panels but Flash ones, this should be the why the Adobe Extension Manager fails.
You might find help here (Flash): Creative Suite Extension Builder and here (HTML): Extension Builder 3
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

Dynamic Link Not Working

To anyone that can help..
I am having several issues with adobe at the moment and really need some advice. i have tried adobe themselves, they struggled to help too, but that was mainly down to language issues.
I have a Canon XHA1S camera with an external shotgun mic Rodeo NGP-2. All of which at some point worked through premiere pro CS5 and encore. i was living the dream.
Then one day, it all started having issues.
Problem #1 - Dynamic Link stopped working
Once my project is done, i would send it to Encore via dynamic link and produce my DVD in either regular or blu ray. Now it doesn't. A box 'import premiere pro sequence' comes up but encore crashes before it can complete the import. sometimes a message telling me "the software thats used to decode the media is not available on this system. installing the correct decodes for the file your working with may help correct the problem" comes up too
Its strange that i've produced about 20 disks with no issues but now a problem. was told by adobe it could relate to the file/pixel size? but again have no idea why this is now a problem now and not before, in fact i would just be happy to know how to change it so it can work? Can anyone help?
Problem #2 - Audio
The only way i am able to make a disk at the moment is to produce it on DVD maker - it's the only way until i get my issues resolved. however my external mic is not coming through, this has something to do with the sound quality to the mic being 44.1 and the DVD maker requiring 48mhz. i can't seem to convert this to work in anything but AVI (would like MPEG-2) but then the picture quality drops to something similar to a tribul rubbing.
If anyone knows of something or can point me in the right direction i would be very greateful
Thanks

Especially for Bluray or DVD that is HD to SD, DL must sometimes be avoided.
But the type of problem you are having may indicate other problems. If regular projects are not working, see these:
Troubleshoot damaged projects in Encore on Windows
http://kb2.adobe.com/cps/406/kb406006.html
Troubleshoot system errors and freezes | Adobe software on Windows
http://kb2.adobe.com/cps/822/cpsid_82252.html
Regarding the audio, can't you just export as 48K?

Premiere Pro CS6 Dynamic Link not working

Hi,
Just wondered if anyone has seen issues with the Dynamic link options in Premiere Pro CS6, all the options to work with After Effects are greyed out although this product is installed.
However I only have CS5 for after effects, is this a compatibility issue or am I doing something wrong here?
Thanks in advance for any assistance.
Kind Regards
Steve

Dynamic Link only works within one version, so you can't use it between CS6 and CS5 or CS5.5 and with older versions you had to have a complete suite, not individual products.

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

Secure Zone password set (send log in details email) link not working for everyone

Hi Guys,
I have a site with three secure zones for different online programs. We're beginning to sell some programs and, because we aren't using a seemless gateway, we are manually subscribing them to the secure zones then clicking the 'Send log in details email' button. The email seems to be going out which is good. But, some clients can't click on the link to set their password. Nothing happens. Even if they copy and paste the link text into a browser window, still nothing.
Anybody know why this would be working for some people and not others. Could it be to do with cookies or email clients etc. We are at a loss and therefore have lost two sales so far (they asked for refunds) because they couldn't access their programs in the secure zone.
Any help greatly appreciated.

Thanks LiamDilley for such a prompt reply. Currently my code looks like this:
...and your password is [{tag_password}]
Are you saying that I should be changing the '[{tag_password}]' to:
[,a href="{tag_password}>{tag_password}</a>]
The thing is, most of the time the link text appears as a link, but not for everyone. Do you think this will fix it?

SSO UIDPW not working for external Popup Window but works with SAPLOGONTICK

Dear Experts,
I have an issue with SSO user mapping (UIDPW), but the same scenario is working with SAPLOGONTICKET.
Some list gets displayed in the Web Dynpro ABAP iView which has the hyperlinks where on click on the hyper link it opens a external popup window (another Web Dynpro Application) and display the summary some data.
This scenario works when I set the logon method to SAPLOGONTICKET, but when I set it as UIDPW it won't work when a new window opens on click on the hyperlink from Web Dynpro iView as stated above. It asks to login to R/3 system.
Can anyone please let me know what could be the reason it fails in External Popup window scenario when logon method as UIDPW.
Thanks
Murthy

Hi Murthy,
You can use application integrator iView to integrate your ABAP application into the portal and you'll be able to pass the variables <MappedUser>, <MappedPassword>, etc. assuming you know about the security risks in passing mapped info.
http://help.sap.com/erp2005_ehp_05/helpdata/en/36/5e3842134bad04e10000000a1550b0/frameset.htm
Still, your ABAPers might need to handle the passed in variables in the first ABAP application and pass them onto the second one. Again, without knowing how you navigate between the 2 apps and other details about your system landscape, versions, etc. this remains as a guess. If you search SDN, you'll find many different solutions then you can choose one which is most suitable for your situation.
Regards,
Dao

Command link not working for project on deployment as ear file

Hi Jdev team / Jheadstart team,
Its a very strange problem i am facing ..
I have two screen with the same VO showing the details records split in two pages ( Master/ details)
it shows a table structure in the firts screen and on clicking through the command link shows the details in the secong page .
its working fine on the LOCAL machine ( JDEV) but once the ear file is deployed to the server it gives the follwing exception :
07/08/08 09:01:23 [1681] *** Using bean introspection to lookup value :currentRowIndexInRange
07/08/08 09:01:23 [1682] Key(String, AttributeDef[]): Invalid Key String found. AttributeCount:31599 does not match Key attributes
07/08/08 09:01:23 [1683] DCBindingContainer.reportException :oracle.jbo.InvalidParamException
07/08/08 09:01:23 [1684] oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value 7B6F7E6F7BF9747D for String passed to method Constructor:Key. Explanation: {3}
at oracle.jbo.Key.parseBytes(Key.java:489)
 at oracle.jbo.Key.<init>(Key.java:183)
 at oracle.adf.model.bc4j.DCJboDataControl.setCurrentRowWithKey(DCJboDataControl.java:863)
Secondly when i use the button instead of the command link it works fine on the machine and deployed on server.
Please tell me is it some thing to take care in the bindings files when regenerating through Jheadstart
(I am using JHeadstart, Jdev 10.1.3) and regenerating using AMApplication Generator file.
the bindings its generating in both cases (command links / button )are :
<action id="setCurrentRowWithKeySmeFundingAdviser"
IterBinding="SmeFundingAdviserIterator"
InstanceName="SmeFundingAdviserFirmsAMDataControl.XXSmeFundingAdviserVO1"
DataControl="SmeFundingAdviserFirmsAMDataControl"
RequiresUpdateModel="false" Action="96">
<NamedData NDName="rowKeyStr" NDValue="#{row.rowKeyStr}" NDType="java.lang.String"/>
Please its very urgent .....
regards
Jazz

Use the uninstall scripts from Adobe to completely remove all vestiges of PPro from your computer. Then perform the installation.
Links to the scripts are on the troubleshooting page.
Cheers
Eddie

Dynamic link not working as expected

maybe I'm missing something. I am in premier cc2014, I select an in and out of my timeline and choose "adobe dynamic link->new after effect composition"
it opens up ae and makes a comp but it is completey empty...and the length of the comp is 30 seconds but my in and out were much less than that
This is my first attempt at doing this, but I thought it was supposed to be pretty straight forward. Am I not understanding how dynamic link is supposed to work?

What you need to do is select all the clips or the ones you want on the timeline right click and select "replace with AE composition" then it will take all of them into AE.

Dynamic Link not working AT ALL (CS5.5)

I've been trying to queue a sequence from Premiere Pro to Media Encoder (both CS5.5), and it says that Dynamic Link isn't working. I tried to make a new After Effects composition with my sequence through Dynamic Link, and it says that I don't have it installed (I do and can sucessfully open it). So, Dynamic Link doesn't work at all. Working on a Mac here. Help?

It's possible that something (e.g., antivirus software) is blocking the communication that Dynamic Link relies on.
See this for solutions to a closely related problem:
http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html

Dynamic link not working for CS6 on Windows 8

Similar Messages

Maybe you are looking for