Dynamic List Wizard error - can't connect to recordset or table

I'm using Windows Vista, CF 8, and DW CS3.
I have just started working with the Dynamic List Wizard and cannot get it to work. I have tried both options: get data from recordset, and get data from table. When I click on "finish" I get the following error message: Please select a connection that contains tables for updating, or click cancel.
Everything appears to be good to go. I've refreshed my recordset, my database connections, etc. Has anybody else had this issue and what is the workaround?
Also, is there a tutorial out there ANYWHERE for this part of the extension? Interakt had such great Flash demos ... what's up with Adobe? No Flash demos for this extension?
Thanks!

Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. This is an example of what can happen. If the NAS doesn't work, your only recourse is to the manufacturer (which will blame Apple.)
If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or a mini-tower (802.11ac) AirPort base station. Only the 802.11ac base station supports Time Machine, not any previous model.

Similar Messages

  • Create dynamic list Wizard

    Hello,
    Been using the tool kit for a while perfectly, but just started getting this error from the 'Create dynamic list Wizard'
    Internal Error. Table Order:
    You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'order) +1 AS kt_tor_max FROM section_cms' at line 1
    Basically as soon as you at sort list by order it throws up this error when you hit save, any ideas?

    Hi Alastair,
    "order" is one of MySQL´s so-called "reserved words" which you can´t use for table and column names -- please rename it to e.g. "order_ord" or whatever and try again.
    For further reference on what words are reserved in this context, please read this list:
    http://www.htmlite.com/mysql002a.php
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • How to add a column to a list created with the Dynamic List Wizard to display the values of the fiel

    Hi,
    ADDT, Vista, WAMP5.0
    We have 2 tables: clients_cli (id_cli, name_cli, tel_cli, and several more fields) and cases_cas (id_cas, idcli_cas, court_cas, and a lot of other fields).
    Clients may have many cases, so table cases_cas have a foreign key named idcli_cas, just to determine which case belongs to which client.
    We designed the lists of the two tables with the Dynamic List Wizard and the corresponding forms with Dynamic Form Wizard.
    These two forms are linked with the Convert Dynamic List and Form Wizards, which added a button to clients list named "add case".
    We add a client and then the system returns to the clients list displaying all clients, we look for the new client just added and then press "add case", which opens the Dynamic Form for cases, enter all case details and everything processes ok.
    However, when we view the cases list it display all the details of the case, including the column and values for the foreign key idcli_cas. As you can image, it is quite difficult for a human to remember the clients ids.
    So, in the cases list we added a another column, named it Name, to display the names of the clients along with cases details. We also created another recordset rsCli, selected the clients_cli table, displaying all columns, set filter id_cli = Form Variable = idcli_cas then press the Test button and everything displays perfect. Press ok.
    Then, we position the cursor inside the corresponding cell of the new Name column, go to Bindings, click on name_cli and then click on insert. The dynamic field is inserted into the table cell as expected, Save the page, and test in browser.
    The browser call the cases list but fails to display the values of the Name column. The Name column is simply empty.
    This issue creates a huge problem that makes our application too difficult to use.
    What are we doing wrong?
    Please help.
    Charles

    1.     Start transaction PM01, Create Infotype, by entering the transaction code.
    You access the Create Infotype screen.
    2.     Choose List Screen.
    3.     In the Infotype no. field, enter the four-digit number of the infotype you want to create.
    When you specify the infotype number, please remember to enter any leading zeros.
    4.     In the Screen Number field, enter the screen number of the list screen you want to enhance.
    5.     Choose Create.
    The Dictionary: Initial screen appears:
    6.     Create the list screen structure.
    7.     Choose Activate.
    8.     Return to the Enhance List Screen in the Enhance Infotypes transaction (PM01).
    9.     Choose Create All.
    The additional fields are displayed on the list screen, however, they contain no data.
    The fields can be filled in the FORM routine FILL-LISTSTRUCT in the generated program ZPnnnn00. The FORM routine is called for each data record in the list.
    Structure ZPLIS is identified when it is generated with a TABLES statement in the program ZPnnnn00.
    The fields can be filled from the Pnnnn structure or by reading text tables.

  • At the moment I can use my apple Id on my iPod touch to connect to iCloud and IMessage and FaceTime but it doesn't work on App Store. Face to an error: can not connect to iTunes Store. What's wrong? My apple Id is working on my MacBook Pro as well.

    At the moment I can use my apple Id on my iPod touch to connect to iCloud and IMessage and FaceTime but it doesn't work on App Store & iTunes just on iPod  Face to an error: can not connect to iTunes Store. (Setting... itunes & app store)What's wrong? My apple Id is working on my MacBook Pro as well. And it was working on this iPod before resetting . Just after resetting I can not connect to App Store & iTunes and I can not instal any app even free apps

    Try
    Can't connect to the iTunes Store

  • Even during the download of free content pops up an error can not connect to itunes store.

    During the download of free content pops up an error can not connect to itunes store.

    Got a bit further, but now just sat here with 2 apps waiting!
    Wifi is fine, can surf, email, etc, but store is still not working.

  • Error: Can't connect to auth server at /var/run/dovecot/auth-master: No su

    Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory
    error showing up, there is no auth-master file in /var/run/dovecot
    this has just happnened over night
    any ideas how to re-install dovecot
    google search goes on about linux but barely any info about max osx server

    auth-master is created when you start the mail service. Deleted if you stop the mail service. If that is not happening, you may have to re-install mail. Dovecot is the IMAP/POP part of the mail service. I am not sure what happens if you disable IMAP. I am guessing it is not there. But that is the extent of any tips I can offer. I suppose you could reinstall, but that seems a bit extreme to me.

  • How to Add the Dynamic List Wizard Form to a Spry Accordion Panel?

    Is it possible to add ADDT Dynamic Forms to the Spry Widgets?
    - I have been trying to add the Dynamic List Wizard to my existing Accordion but everytime I do, the Accordion turns into plain text?
    -Also, If it is possible then how do I target the Panels and have the detail record open up in Panel number 2?
    I plan on having the ADDT Dynamic Form in Panel 1, and want the Add, Edit, New, Delete form to open up in Panel 2.
    Thanks for your help,
    jlig

    I figured this out.
    1) First add all the Fields to the Form using the ADDT Insert Record Form Wizard.
    2) View the ADDT form in the browser to make sure the fields all display.
    3) In DW design view, move the cursor just to the left of the ADDT Form and hit Enter to Add a line just above the ADDT Table.
    4) With the cursor below the Red Form line and just above the ADDT table add the SPRY widget. (ex..Tabs)
    5) Now highlight the rows you want to move & hit Cut, then open up Tab1, highlight Content1 and hit Paste.
    I decide to leave my date_added, modified_By & date_modified fields below the SPRY tab widget so that these fields are visible all the time. When I click on the Insert button, the record was added correctly to my Table after Validation passed.
    Thanks,
    jlig

  • JAM Agent ERROR: Can't connect to Console 141.144.184.78:3600: Connection r

    Hi
    I am trying to connect to AD4j , but I am getting the following error during server start up.Please help me in resolving the issue.
    JAM Agent ERROR: Can't connect to Console 141.144.184.78:3600: Connection refused
    JAM Agent: Port is 62751
    Pandu

    Check accessibility of ports 3600 and 62751 if you have a firewall

  • Windows 8, Error: "Can't connect to this network"

    I have wracked my brain, my colleague’s brains, and used my googlefu to no avail.
    I have a Win8 basic (cheapest OS) HP tablet 1000G2 that I am having troubles with. I have a network that requires WPA2-Enterprise with PEAP. It will not connect to this network, it will however connect to a neighboring network without
    any security settings. I have fixed this issue once before and the same fix is not working.
    The kicker... I have another exact same tablet that we got the same day... No issues connecting
    Problem: It does not take the security settings that the server is prompting for. It prompts me for my credentials, but gives this error: "Can't connect to this network"
    I did research last time and the collective reason was that the security settings weren't correct.
    Solution that worked last time:
    Connect to a network with open sec settings.
    Open network and sharing center
    Change adapter settings.
    Right click wireless adapter click status
    Wireless properties.
    Security tab.
    Change my network settings
    Reconnect to my network
    The tablet has been fine until today. These steps above do not resolve the issue anymore.
    THERE IS NO VIRUS PROTECTION BESIDES WHAT WINDOWS OFFERS ON THIS DEVICE!
    Troubleshooting steps I have tried: deleting all the wlan profiles with
     http://windows.microsoft.com/en-us/windows-8/manage-wireless-network-profiles
    and used http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-laptop-wont-connect-to-the-wireless/256c8bd2-e11f-4746-b3aa-3e6eb8305b56 page.
    Change any properties one at a time that I thought might deal with this.
    Removed all HP bloatware/3rd party connection managers.
    Troubleshooting I tried last time:
    Uninstalled and installed adapter drivers.
    Tried the windows diagnose
    Googlefu "Can't connect to this network" and you come up with a bunch of pages I have clicked on them and none of the solutions have worked.
    Please if you have any solutions let me know! I am at my wits end with this dang thing.

    These are all logical ideas, but alas I have already checked all of this. We do not have any blocking other than credentials(which are not locked and are correct). The amount of connections would be determined by how many IP Addresses that I have(which is
    a ton). Not the wireless router, because we have many other devices that connect to it just fine. No mac filter. No the other pc isn't connected. No it is only connecting to one network.
    I should mention that this is in an enterprise and not an at home network. It is a WAP not Wireless Router.

  • HT4009 Unfortunately, I keep getting the error "can not connect to iTunes. Code:0" I've tried rebooting, signing out of my apple ID, can someone please help or advise me on what to do? Many thanks, Ryan

    Unfortunately, I keep getting the error "can not connect to iTunes. Code:0" I've tried rebooting, signing out of my apple ID, can someone please help or advise me on what to do? Many thanks, Ryan

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

  • Getting error  "Can't connect to database DBMS is not supported in your current installation" in Demantra

    Hi,
    I have installed Microsoft Win x64(64-bit) Demantra 7.3.1.5 on Win 7(64-bit).
    When I try to open Business Modeler or Demand Planner or Business Logic Engine from :
    Start -> Oracle Demantra Spectrum , I am getting same error "Can't connect to database DBMS is not supported in your current installation"
    Below is a screenshot of same.
    I can connect to Collaborator Workbench though, but when I click on any of the "Planning Applications" from the menu in Collaborator Workbench window, again error is thrown.
    Error is  " Application could not be run! Error : undefined " as below :
    I have installed Oracle DB Enterprise edition 11gR2(64-bit)
    Please suggest where I am doing wrong.
    Regards,
    Vinni Sharma.

    Hi Sharma,
    Is this issue resolved? or still facing the same problem?
    We need to setup connections details in ds.ini file under demantra_installation\Demand Planner\Security Management folder on the server side.
    Regards,
    Akshay

  • I can't get email. Get POP3 error . can't connect to POP3 server. It's not email vendor issue ... c

    Good afternoon. For over a week I can't get email on MY DASH.  Can't see mail in my Gmail Viewer.  Get a POP3 error ... can't connect to POP server.  Thought it may be a Gmail interface issue so tried to get Hotmail and then Earthlink email in the Chumby email app.  Both give same message POP3 Error , can't connect to pop3 server.  I have done multiplr hard restarts / power off / "restore to normal operation" procedures.  I have searched the discussions and community and can find no mention of POP server issues.  Please help .... advise.  I'm a disabled, but still working, senior citizen without a fancy, internet, cell phone and my Dash's ability to display my email is very important to me.  I have the Dash at my bedside and My Dash allows me to see a message from a client before I would otherwise rise. Kind regards, Martin

    Hi USER-901698,
    This is not an issue with the Sony device.
    We highly suggest to contact your email service provider regarding your concern.
    For further information, please check the link below.
    https://us.en.kb.sony.com/app/answers/detail/a_id/32749/p/46543,46552,46553/c/65,66/kw/pop3
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Installation error : Can't connect to X11 window server using ':0.0

    Xlib: connection to ":0.0" refused by server
    Xlib: No protocol specified
    WHILE INSTALLING ORACLE10g ON FC1 GETING THIS ERROR
    Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
    :0.0
    :0.0
    Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
    Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
    - For csh: % setenv DISPLAY 192.168.1.128:0.0
    - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
    HOW SHOULD I MAKE THE REQUIRED CHANGES

    Check this thread:
    Re: Can't connect to X11 window server using 'localhost:0.0'

  • How can I connect with the AspNetUsers table in MVC 5?

    I have a model, in which I have used several foreign keys from other tables. The point is that I also need to get the Id of the user, from the AspNetUsers table, though, I don't know how. I have done something like this, but it doesn't seem to be working:
    public class Message
        public int MessageID { get; set; }
        [Required(ErrorMessage="Please type a message to submit")]
        [DataType(DataType.MultilineText)]
        [Display(Name="Message")]
        public string MessageText { get; set; }
        public DateTime WrittenOn { get; set; }
        [Required(ErrorMessage="Please select a ticket")]
        [ForeignKey("Ticket")]
        [Display(Name="Ticket")]
        public int TicketID { get; set; }
        public virtual Ticket Ticket { get; set; }
        [Required(ErrorMessage = "Please select a business")]
        [ForeignKey("Business")]
        [Display(Name = "Business")]
        public int BusinessID { get; set; }
        public virtual Business Business { get; set; }
        [Required(ErrorMessage = "Please select a user")]
        [ForeignKey("aspnetusers")]
        [Display(Name = "User")]
        public int Id { get; set; }
        public virtual ApplicationUser ApplicationUser { get; set; }
    When I try to create a controller using the Entity Framework with my model, I get an error message saying:
        The ForeignKeyAttribute on property 'Id' on type ... is not valid. The navigation property 'aspnetusers' was not found on the dependent type ... The Name value should be a valid navigation property name.
    If someone could help me solve the problem, I would be glad.

    Hi Toni,
    I see that this particular query is been answered in the following thread.
    http://stackoverflow.com/questions/25372436/how-can-i-connect-with-the-aspnetusers-table-in-mvc-5
    You can also refer the following links, hope this helps.
    http://stackoverflow.com/questions/20071282/aspnet-identity-and-mvc5
    http://blogs.msdn.com/b/webdev/archive/2013/10/16/customizing-profile-information-in-asp-net-identity-in-vs-2013-templates.aspx
    Regards,
    Bharath

  • 800a0bcd error on dynamic list wizard

    hi, i created a list of records using list wizard and by default everything works perfect. then i added another show if... komponent and instead of (default) message "The table is empty or the filter you've selected is too restrictive.", i get this error:
    ADODB.Field error '800a0bcd'
    any thoughts?
    bye, bossti

    thank you georgev! i understand this error message, but somehow cannot find solution...
    short description:
    i have a list of users which belongs to 2 different countries. now, i would like to put a selection menu (link) on this page to choose a country.
    this selection is ofcourse in 2 languages, so if one is selected other one is hidden and vice-versa. what i did is, i simply add some text and link it with a relevant url parameter and add "show if conditional region", then i repete this procedure for 2. language.
    it works fine if everyting is right, so i can open a list of users, switch between coutries, filter/search user with specific data.... until i enter some data which doesn't belongs to any record, than insted of default message "filter is to restrictive....." this error appears.

Maybe you are looking for