Dynamic LOV for end user

we have country LOV and given to end user as admin group,whoever having admin group user can add new country in their country LOV item! it it possible to do it? it means user could create/modify the county! while choose the LOV!
my workspace: ram_r&d
user/password:aramani/apex
http://apex.oracle.com/pls/otn/f?p=29288:5
Thanx,
Ram

Add new entry to the LOV "Add new country" then create a dinamic action set it to when lov = Add new Country open modal to add a country.

Similar Messages

Recording NWBC scripts for End User Experience

Hi Experts,
I am recording NWBC scripts using the Netweaver Business Client GUI for loading and running it through Robots for End User Experience Monitoring. I don't see an option to "LogOff" in NWBC client while recording the script. We only have option to "Close all session and LogOff" in NWBC client .
When I am using this option, it closes all the sessions including the EEM Recorder also without saving the recording .
I need to include "LogOff" as the last step so that it doesn't leave any active sessions for each run by different robots.
I have a Solution Manager 7.1 SP10 and NWBC client 3.5 Patch 13.
Please help me achieve this.
Regards,
Manish K

Hi,
for a browser the recommendation is to open a new, empty tab to keep the browser alive while closing the tab with the session. All that with the hope that the backend will use the triggered event of collapsing tab to close session.
Maybe a similar strategy works for NWBC.. but I don't know the UI in detail.

Reset passwork for end user using XE version 2.1.0.00.39

Hi All,
I would like to create a link "Change Password" for end users to able to change their password anytime. I've followed the link below
Self Reset Password
but it still require the admin login before end users can change their password.
The following steps that I did:
1. Under "Shared Components", create a Navigation Bar entry name "Change Password".
2. On page 1, click on the "Change Password" link under Navigation Bar and entered
Target Type = URL
URL Target = javascript:popupURL('f?p=4350:53:&SESSION.:::53.F4350_P53_USER_NAME::APP_USER');
How do i make the "Change password" link go directly to reset password page after end users clicked on it without admin login require? I'm using a default authentication and all end users assigned to user group.
Thanks in advance,
Kevin

Kevin,
You want the users to go to popup page 58 (in application 4350). See this thread: Re: Pop Up Change Password Window . But I don't know if that will work in 2.1.
In general, you're better off using other types of account management tools such as LDAP.
Scott

Page customization for end user

is it possible to use other mechanism for end users to customize their own pages instead using the portal features since it's a little complicated cause each user needs to create new pages, add portlet, etc.
Can we use the mechanism like my cnn, my yahoo,excite and how to do that in a simple way?
thanks for helping

Hi,
I have the same question, but I would like to have a seperate page or application, showing only predetermined portlets, for users to choose from and place on their page. I do not want the end user to ever see the customization process Oracle uses. Can this be done???
<BLOCKQUOTE>quote:<HR>Originally posted by Karthika Siva ([email protected]):
A simple way to do this:
1. Create a page that will become the default page for end users. This page will have your branded look & feel (style) and contain a default set of portlets. These are portlets that you think your typical user will find useful.
2. Create portal user.
3. Grant one of the following privileges on the page to the user. Grant 'Full Customization' or 'Add Only Customization' depending on how much control you want to give the end user. Keep in mind that both of these privileges allow the end user to only customize their PRIVATE VERSION of the page. Others will see the default, or their own version if they have also personalized it. See the online help on the Access tab of the Customize Page screen for a description of the privileges.
4. Once that is done, set this page as the default home page for the user. You can do this using the Preferences tab on the edit user screen.
Now the portal user can log into the portal, and personalize his/her page by customizing portlets on the page, hiding/showing default portlets, and even adding other portlets to the page.<HR></BLOCKQUOTE>
null

CProjects for end users

Afternoon all, i've recently installed cProjects as a add on to a WEBAS system, i'm after some useful links/information about how to use the product at all, as i've no real experience of it.
Any help would be much appreciated, the SAP guides don't seem to be suited for end users thats all....

Hello James,
From your post I cannot make out which release of cProjects have you installed (3.1 or 4.0). Any way pl find below the links to the help.sap.com portal which is a detailed guide to cProjects Suite.
cProjects Suite 3.1
http://help.sap.com/saphelp_cpro31/helpdata/en/home.htm
cProjects Suite 4.0
http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
Hope this helps.
Rgds
Deepak

SCSM 2012 SSP Permission for End users

Hello Experts,
I have an issues with SSP - SCSM 2012 SP1.
As an admin user, I can see theOfferings, see the pending requests, can see the requests I have submitted, Approve them etc. But when I am an end user, browsing from my laptop, I see a blank Home page. I dont see the Service offerings in the
homepage..even I dont see the Need Help? text. What is the issue? FYI : Silver light is already installed on my laptop.
Interestingly, I see the Need Help? text with the same end user credential when I am opening the browser inside the server wher SSP is installed.
But, in both the cases, whether I browse in the server or from my laptop, I dont see the service offerings anywhere when i am an end user. I followed the below article..but no success.. :(
http://systemcentertech.com/2012/06/28/scsm-2012-portal-service-catalog-empty-for-end-users/
Please help...
Thanks!
Thanks

Hi,
Did you add the Service Offerings and Request Offerings to the Catalog Group? Here is another good blog on this you can reference:
http://www.concurrency.com/blog/scsmportalpermisions/
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Applet Debugging Option for End Users

Users in our 12.0.4 development system that only have the 'xMII Users' role can see and use the 'Applet Debugging' option under the System Management menu. I'd prefer them to only have the options under the Support menu.
I'm puzzled why this one option is availble for end users. What am I missing?
David Macindoe

What am I missing?
I guess nothing.
Its just that it is designed this way. Moreover the option is harmless from a Security point of view.
May be you will find this 'fixed' in later versions.

Training Material for end-users

Hi SAP Gurus,
I need to prepare a Online Quick Reference (OLQR)/questionnaire/FAQ's (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM), for the end-users, which they will refer to after Go-Live.
I also need to prepare training material for end-users for (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM),to be used during the training session's prior to Go-Live.
I would appreciate, if someone could please send me project documents related to the same on my email id [email protected]
This is very urgent and I have to complete the documents ASAP, so please reply at the earliest.
Thank you all in advance.
-- SJ
null

Hi Ravi,
Thanks alot for your help.
But, I was looking for some Project documents that I can refer to for preparing Training Material and questionnaire/FAQ's/online documents (SAP R/3 4.7 -FICO, SD & MM) for the end-users, which they can refer to after Go-Live.
It would be great, if you could please send me some project documents on my email id: [Email removed by moderator]
Thanks,
--SJ
Message was edited by:
Mario Herger

Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
It seems to be considering these items as removable media?
DPM 2012, SP1, version 4.1.3313.0
Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
Affected area: skutter.pmuk.net
Occurred since: 11/01/2013 09:04:43
Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
, atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
, firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
,firebird.pmuk.net_HADPCLQuality , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office ,firebird.pmuk.net_OMPM
, firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8 ,firebird.pmuk.net_Spares
,firebird.pmuk.net_test ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$ ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON ,legion.pmuk.net_SYSVOL
, nemesis.pmuk.net_KEvin ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$ ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
, valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
Any Ideas? backups are OK, recovery points/sync's etc.
Mark.

I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
In DPM I disabled EUR
In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
Delete all of the mappings within the container
In DPM enable EUR
In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
Related article on ADSI Edit and DPM -
http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
I hope this helps
JD Young

So No Love for Vista Users then?

So there is no love for Vista Users to install Itunes on my pc? Are the People working on a Fix so it can be ran on that OS? i only need Itunes, not Quicktime.
Thanks for any input on this matter
Derek

Hi Derek!
This forum is for Macintosh and Windows compatibility. (iTunes is not Macintosh.)
You'll probably want to post your question in Apple's iTunes for Windows forum found here <http://discussions.apple.com/category.jspa?categoryID=150>. Be sure to search the forum first. I would imagine your question has already been asked and answered.
Good luck! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

Utilizing the Workspace for end users

Trying to see how can I utilize the existing workspace for "end users" who are supposed to access the application, I have two questions:
1- How to remove the extra regions, logos and etc.
2- How to add link to the application
Thanks,
Mehr

I'm not clear on your question, but I'm going to take a wild stab in the dark and think you would like to customise the workspace login
http://www.grassroots-oracle.com/2013/02/modifying-apex-workspace-login-page.html
Why not provide them the appropriate URL in the first place?

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Create a dynamic attribute for each user

Hi All,
I request you all to let me know how to give an approach to the following requirement.
REQUIREMENT: I have to create a dynamic attribute in UME for each user and the read the attribute on lead selection of a table having list of Users.
 On lead selection, the dynamic attribute value should be either true or false. Based on this value the rest of the application specific operations wil be taken care.
 If a particular User does not have the dynamic attribute associated to it, then we need to create the same.
Looking forwarrd for your help.
Regards
Dipendra

//@@begin javadoc:UMSavePropertiesByNode()
 /** Declared method. */
//@@end
public boolean UMSavePropertiesByNode( )
 //@@begin UMSavePropertiesByNode()
 try {
 if (wdContext.currentUserDataElement().getVaIUserMaint().setAttribute("com.sap.security.core.usermanagement", this.getUMPropertyName(null) + ".TableColumns", this.getPropertiesByNode())) {
 wdContext.currentUserDataElement().getVaIUserMaint().save();
 wdContext.currentUserDataElement().getVaIUserMaint().commit();
 msg.reportMessage(IMessageTableUtilsComponent.UMPROPERTY__SAVE__FIELDS__SUCCESS, null, false);
 } catch (UMException ex) {
 wdContext.currentUserDataElement().getVaIUserMaint().rollback();
 msg.reportMessage(IMessageTableUtilsComponent.UMPROPERTY__SAVE__FIELDS__ERROR, null, false);
 return false;
 return true;
 //@@end
//@@begin javadoc:UMLoadFieldsProperties()
 /** Declared method. */
//@@end
public petrobras.com.br.classes.FieldsTable UMLoadFieldsProperties( petrobras.com.br.classes.FieldsTable fields )
 //@@begin UMLoadFieldsProperties()
 String properties[] = wdContext.currentUserDataElement().getVaIUserMaint().getAttribute("com.sap.security.core.usermanagement", this.getUMPropertyName(null) + ".TableColumns");
 if (Compare.getLenght(properties) > 0) {
 //msg.reportWarning("[UMLoadFieldsProperties]: properties.length = " + properties.length);
 for (int i = 0; i < properties.length; i++) {
 int attrPos = Integer.parseInt(properties.substring(properties.indexOf("(") + 1, properties.indexOf(")")));
 String attrName = (String) properties.substring(properties.indexOf(")") + 1, properties.indexOf("="));
 int attrValue = Integer.parseInt(properties.substring(properties.indexOf("=") + 1, properties.indexOf(";")));
 Field item = fields.getField(attrName);
 if (item != null) {
 item.setPosition(attrPos);
 item.setVisibility(WDVisibility.valueOf(attrValue));
 fields.removeFieldByName(attrName);
 fields.addField(item);
 return fields;
 //@@end
regards,
Angelo

ALV Document for End Users

Hi:
I need a document on ALV which explains genereal functionality available for reporting for the end users. We created couple of ALV report

Hi Dev,
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
<REMOVED BY MODERATOR>
raam
Edited by: Alvaro Tejada Galindo on Apr 22, 2008 10:39 AM

Dynamic LOV FOR TABULAR FORM 6i

Hi,
I have tabular form of two Items(ID,DESC) and I want to Populate LOV for item(ID) every record
and record_Group & SQL statments are stored in DB.
ACTION: when query in POST-QUERY Trigger get for every record in tabular form -- the stored SQL-Statment from table then put it into dynamic record_group and populate the dynamic LOV.
Please advice,
Thanks in Advance.

OK daniel
This form used for get reports
then header get the name of Report (Table-A) (report_ID),(report_desc).
then details for get the Parameters will send to report builder (Table-B) (detail_id),(report_id),(sql_stm).
so parameters may be need for example stock code so this record need to query from stocks table to get stock code and stock name.
next record for item Code so need to query from Items table to get the Item code and Item name
another report for employees so the user enter report code then when query and get in details block employee code and employee name.
so the lov will check if this record have query sql-statment or not if have execute it in the record_group then in lov
then go to the next record if sql_stm is null then no lov in this record and so on.
thanks..

Dynamic LOV for end user

Similar Messages

Maybe you are looking for