Dynamic mail message's through Alert

Hi All,
We have a requirement to send dynamic mail messages based on the alert output's.
like if the output value is NULL then i need to send different message and if it is not null then another message has to go to the user.
is this possible through alert??
Thanks in advance,
Jana

Hi jana;
AFAIK yes its possible, please check below links and notes:
plz help me...!!!! Workflow Notification Mailer
Re: EBS work flow
Also check:
Control - Workflow: Setup Doc ID: 113664.1
Oracle Workflow Best Practices Release 12 and Release 11i [ID 453137.1]
Oracle Workflow Release 12 Diagnostics Doc ID: 469822.1
Regard
Helios

Similar Messages

Mail, Message and Calendar alerts turned ON

How do you set or tuned on alerts tone for mail, messages and calendar event to continues reminds you until cancelled, thanks for your help, I'm using 3g with firmware 3.0.

Actually, you don't.
Mail will give you one aural alert. The badge on the screen's mail icon is the only other indication of unread mail.
For messages, go to Settings -> Messages and turn Repeat Alert on or oﬀ. If you ignore a message alert, you’ll be alerted two more times.
When you add a calendar event, you can set an alert from 5 minutes to 2 days before an event. Once you set an alert, you have the option to set a second.
There is no way to set continuing alerts until acknowledged.

The iPad shuts down when the cover is closed so I can't get mail message or Skype alerts?

Didnt do it at first but now when the ipad cover is closed it wont alert me to mail or massages etc.
Done everything I can think of but to no avail.
Perhaps I have changed a setting without realising it...
Can any one help with that one?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

I can no longer receive e-mail messages through my @mac/@me account. I can still send e-mail messages, though. I believe there may have been recent attempts to hack into my account. I have changed my password, but wonder how to start receiving mail again?

I can no longer receive e-mail messages through my @mac/@me account, though I still seem to be able to send messages. I believe there may have been recent attempts to hack into my Mail account (my LinkedIn and Facebook accounts were both hacked three days ago and a scam/phishing message sent to my contacts, and I know there was at least an attempt made to hack into one of my e-mail accounts). I have already changed my Apple password, but how do I start receiving mail again?
(And I should also say that I'm a little surprised there was no alert from Apple of suspicious activity on my account, if such was the case. Instead, when I logged into my account via Mobile Me three days ago I noticed that all messages in my inbox were gone as well as all of my contacts. I assume this was related to the current problem.)
Thanks for all responses.

The problem has been solved with the help of a MobileMe online counsellor. My MobileMe account had in fact been hacked into and the fraudster had been redirecting my e-mail messages to a phony account that he controlled. We took the forward off and reset all my passwords and security questions, which solved the immediate problem.
Thx.

Dynamic xml messages in alerts

Hi,
I have a ccBPM where I throw an alert on an application exception.
I want to include the entire xml message in the alert and email it to assigned users. I tried doing a document-to-string conversion of the xml message and putting the string in alert message as &messagestring& but the value gets stripped after first 80 characters or so.
Does anyone have experience in having dynamic xml messages in alerts? Is there any other way of doing it?Any insights are appreciated.
Thanks and Regards,
Suresh.

The way we did is, before raising the alert we sent the whole message in an email (mail adapter) to the group email id.
Sudhir /Michal can answer this best.
regards
SKM

Dynamic Mail Adapter using message split

Hi,
My requirement is like this:
one flat file will come
Sample Structure:
Email_address   Custom_ID        Status             Comments
Many records will be there in that
Sample data:
som @ xi.   1234       approved        blablabla
ram @ por   1236       approved        blablabla
par @ mdm 1237      approved       blablabla
vin @ gp      12348     rejected        blablabla
Pi needs to pick the 1st record and construct an email with following information:
email address: som@xi
Likewise every record needs to be sent as email, and club the records in one mail if the mail address is same.
How to go by!
I have read the Micheals Blog:
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
And gone through the SAP note and downloaded the XSD.
The XSD is may works only for one record, also occurance in XSD is (1,1).
if Any other approach Please suggest me.

I also tried that it is saying
" Cannot load schema with the target namespace http://sap.com/xi/XI/Mail/30 to namespace http://blabla.com/IMG/INF2199"

How to trigger a mail through ALERT CONFIGURATION??

Hi Folks,
I want to know how to trigger a mail through Alert Configuration?
I've read Help.SAP.com, but i am not clear where exactly the sender Email address to be given for sending a mail??
Pls reply..
Thanks in advance..
cheers
ram.

Hi,
You need to maintain the email address in SU01 for the particular user Id. Also you need to configure transaction SCOT for this.
Regards,
Jai Shankar

"Returned mail: Message failed to pass through virus scanner"

We have a large number of this mail (see below) on our OCS1 cause by virus like MyDoom:
From: "Mail Delivery Subsystem" <[email protected]>
To: [email protected]
Mime-Version: 1.0
Content-Type: multipart/report;
     report-type=delivery-status; BOUNDARY="----ORCL_ES6_BOUNCE_1095724----"
Date: Fri, 22 Oct 2004 09:52:32 +0200
Subject: Returned mail: Message failed to pass through virus scanner
------ORCL_ES6_BOUNCE_1095724----
Content-Type: text/plain
The original message was received at Fri, 22 Oct 2004 09:51:21 +0200
from <[email protected]>
----- The following addresses had delivery problems -----
<[email protected]> (unrecoverable error)
----- Transcript of session follows -----
Message failed to pass through virus scanner
------ORCL_ES6_BOUNCE_1095724----
content-type: message/delivery-status
Reporting-MTA: dns; maildb.italtbs.com
Final-Recipient: rfc822;[email protected]
Action: failed
Status: 5.7.7
Diagnostic-Code: smtp; Message failed to pass through virus scanner
------ORCL_ES6_BOUNCE_1095724----
Content-Type: message/rfc822
Return-Path: <[email protected]>
Received: from mailas.italtbs.com by maildb.italtbs.com
     with ESMTP id 10957241098431481; Fri, 22 Oct 2004 09:51:21 +0200
Received: from italtbs.com
     by mailas.italtbs.com with SMTP id i9M7pJJ06571
     for <[email protected]>; Fri, 22 Oct 2004 09:51:19 +0200
Message-Id: <[email protected]>
From: [email protected]
To: [email protected]
Subject: Found
Date: Fri, 22 Oct 2004 09:50:40 +0200
MIME-Version: 1.0
Content-Type: multipart/mixed;
     boundary="----=_NextPart_000_0007_0000355F.0000439E"
X-Priority: 3
X-MSMail-Priority: Normal
------ORCL_ES6_BOUNCE_1095724------
On MAILAS.italtbs.com are installed infrastructure, sendmail and Symantec Scan Engine.
On MAILDB.italtbs.com are installed storage database and midtier.
Can I stop this useless messagges?
Thanks and regard
Matteo

Are you still unable to send email? What client are you using? Do you see your job represented on ePrintCenter?
Although I am an HP employee, I am speaking for myself and not for HP

Moving mac mail messages to gmail through imap

Newbie question so be gentle
Looking to move my Mac Mail to Gmail through IMAP - this is to ensure I can access my mail from any machine whilst I'm on the road working plus if my hard drive dies (which it did a year ago) I won't loose any messages/folders.
Currently have a couple of email addresses coming straight into Mac Mail and have numerous folders set up. Want to know if I link the Mac Mail to my Gmail account using IMAP will all my messages plus folders simply sync online with no issues? Will the folders remain intact (I understand Gmail uses 'labels' as folders)?
Looking forward to hearing from you and thanks in advance for your time.
Peace
DK

you can configure your gmail account as an imap account in mac mail. Then you can drag and drop either way between the 2 accounts. Once you have done that when you login to gmail webmail the mail will have been added there.
If you want to configure gmail webmail to recieve mail from a different mail account other than your gmail then you need to goto the gmail website for answers as this is not related to apple.

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages

Try a search... I'm sure if you put forth a little effort you can find a solution that will work for you.

Fault e-mail message

Hi,
I have asynchronous scenario :
e-mail -> XI 3.0 - IDOC (R/3)
When received e-mail is not processed corectly I have to send an error e-mail message back to to supplier.
What is a simplest method to achieve this ?
Is it sufficient to use Fault Message Type (what else ?).
Thanks
Marian

Dear Marian Morzol,
          Here are my clarification
1)
In Aravindh weblogs there is a example when execution time exceed some treshold value. However I need to raise alert when an error occurs in message processing. Do I understand it correctly when I suppose that category MONITORING and parameter CCMS_MONITORING with value 1 will rease an alert when the above error occurs ?
I suppose it based on documentation : "If you have monitoring switched on, any system and application errors that occur when processing an XML message within the Integration Engine are saved in the CCMS."
category MONITORING and parameter CCMS_MONITORING with value 1 will switch on CCMS and will not raise alert with the message fails.But for raising alerts during the configuring CCMS it is mandatory to switch on CCMS.
Once you configured CCMS , the inbuilt property of the CCMS will raise alert when a message fails or when the time for execution exceeds beyond a limit depending upon our configuration(as mentioned in my second and third blogs on CCMS).
      1.Switch on CCMS (parameter CCMS_MONITORING with value 1)
      2.Add the system (SID) and its client that needs to be monitored.
      3.Go to RZ 20 .from the monitoring template availablr for Exchange Infrastructure , create a monitoring set for monitoring that system.
    Once this is done CCMS is responsible for raising alerts when a message fails.We can then handle the alert raised with suitable auto reaction methods which in turn calls function modules or RFCs.
2)
In Aravindh series there is a fixed e-mail address ... I need to read supplier number from MessagePayload/ or original sender e-mail address and send message to this e-mail address. Based on Michal weblog I am able to write a supplier number to alert message. But how I can reach this text from any further (ABAP) program (method) ?
The recipients who should be informed about the failure of the message will be maintained in the auto reaction methods as well as the SAPCONNECT configuration.
   There is nothing much u can do to dynamically choose the recipients. Becoz triggering E-Mail in CCMS is a configuration setting done once.There is no place to do business logic involved anywhere in the configuration as far as i know.
    In simple terms , the entire process is just like connecting pipes of different shapes and size .You cant do anything when water is flowing inside. its all set.
"I need to send an e-mail to recipent e-mail read from XML which will be delivered to XI e-mail adapter in e-mail as an attachment.
Do you think it is possible to implement ?"
I think it is possible. Are you aware of the payloadswapbean---> itz a module provided by SAP , it will bring in the attachment as the payload and helps you to extract information from the attachment.
    It is available in detail in How ToUse the Mail
Adapter of the XI 3.0 J2EE Adapter Engine(Page no: 8,9,10).
Have a look and i feel it helps you.
really sorry for the late reply.
regards,
aravindh.

Mail messages missing after upgrade to 10.4.3

Short story: I upgraded a Mac from 10.3.9 to 10.4.3 and now none of my old received mail messages are in my inbox.
Long story: Installed Tiger using "Archive and install". Repaired permissions. Installed the combo updater to 10.4.3 using software update. Repaired permissions again. After the system was upgraded to 10.4.3 I opened mail. It said it was importing messages. However, when it was done, there were only 6 messages from the last few days. The other 400 or so messages that had been in mail (in the inbox) in the previous version were not in the mailbox. I tried rebuilding the mailbox. This resulted in losing all of these 6 messages. I tried importing from the old account mailbox and mail re-created the mailbox structure, again with only 6 messages in the inbox.
I have tried re-importing my inbox which is listed as 18.2 mb in size but I get a dialog box that says there are no valid mail messages to be imported. I have tried importing messages from my backup disk, a backup created before the 10.4.3 upgrade but it gives me the same “no valid messages to be imported.” I have tried rebooting but there are still only 6 messages in the inbox to be seen.
Of note, the sent mail box is full of messages and appears to have been upgraded appropriately.
The application mail and all associated mailboxes etc are in their default locations. I have not moved or modified any of the locations of files.
Any ideas on what happened and more importantly how to restore or otherwise make visible all of my mail messages?
Thanks,
Pete

Hi Ernie! I really appreciate your assistance. Are you ready for this? I had 13 POP accounts... Here is the current info on the files on my Mac (upgraded from 10.3.9 to 10.4.3 last night)
Pop Account 1 Folder (Main email account lost all inbox messages)
INBOX.mbox contains:
- content_index (3.9 MB)
- content_index-h-67-100-128-207.sttnwaho.dynamic.covad.net-542 (5.3MB)
- Info.plist (4KB)
- mbox (117.1 MB)
- Messages (empty folder)
- Messages-T0x560b9f0-pyksdq (contains file named 1.emix, 4KB)
- tableofcontents (264 KB)
Pop Account 2 Folder (Smaller email account appears to be intact)
INBOX.mbox contains:
- content_index (208 KB)
- Info.plist (4KB)
- mbox (416 KB)
- Messages (Folder contains 31 "emix" files, 488 KB)
- tableofcontents (8 KB)
Pop Account 3 Folder (Minor email account - not much was here, might be ok)
INBOX.mbox contains:
- content_index (16 kB)
- content_index-h-67-100-128-207.sttnwaho.dynamic.covad.net-542 (8 KB)
- Info.plist (4 KB)
- mbox (4 KB)
- Messages (Folder contains 1 "emix" file, 4KB)
- tableofcontents (4 KB)
Pop Account 4 Folder (important email account lost all inbox messages)
INBOX.mbox contains:
- content_index (1.4 MB)
- content_index-h-66-167-49-109.sttnwaho.dynamic.covad.net-455 (1.4 MB)
- Info.plist (4KB)
- mbox (3.3 MB)
- Messages (empty folder)
- Messages-T0x560b9f0-4voERb (contains 1 "emix" file, 4KB)
- tableofcontents (40 KB)
Pop Account 5 Folder (Minor email account - couple messages made it)
INBOX.mbox contains:
- content_index (20 kB)
- Info.plist (4 KB)
- mbox (8 KB)
- Messages (Folder contains 2 "emix" files, 12 KB)
- tableofcontents (4 KB)
Pop Account 6 Folder (Minor email account - couple messages made it)
INBOX.mbox contains:
- content_index (8 kB)
- Info.plist (4 KB)
- mbox (4 KB)
- Messages (Folder contains 1 "emix" file, 4 KB)
- tableofcontents (4 KB)
Pop Account 7 Folder (important email account - inbox seemed to come through - not positive it is all there, but it looks good)
INBOX.mbox contains:
- content_index (2.8 MB)
- content_index-localhost-574 (2 MB)
- Info.plist (4KB)
- mbox (25.9 MB)
- Messages (Folder contains 670 "emix" files, 25.9 MB)
- tableofcontents (176 KB)
Pop Account 8 Folder (inbox messages appearing - not sure they are all there)
INBOX.mbox contains:
- content_index (628 MB)
- Info.plist (4KB)
- mbox (2.7 MB)
- Messages (Folder contains 130 "emix" files, 2.9 MB)
- tableofcontents (28 KB)
Pop Account 9 Folder (Minor email account - couple messages made it)
INBOX.mbox contains:
- content_index (116 KB)
- Info.plist (4 KB)
- mbox (1.9 KB)
- Messages (Folder contains 4 "emix" files, 1.7MB)
- tableofcontents (8 KB)
Pop Account 10 Folder (Smaller email account appears to be intact)
INBOX.mbox contains:
- content_index (16 KB)
- Info.plist (4KB)
- mbox (12 KB)
- Messages (Folder contains 4 "emix" files, 20 KB)
- tableofcontents (4 KB)
Pop Account 11 Folder (inbox messages appearing - not sure they are all there)
INBOX.mbox contains:
- content_index (756 MB)
- Info.plist (4KB)
- mbox (13.6 MB)
- Messages (Folder contains 152 "emix" files, 12.3 MB)
- tableofcontents (60 KB)
Pop Account 12 Folder (inbox messages appearing - not sure they are all there)
INBOX.mbox contains:
- content_index (500 MB)
- Info.plist (4KB)
- mbox (5.7 MB)
- Messages (Folder contains 93 "emix" files, 5.5 MB)
- tableofcontents (24 KB)
Pop Account 13 Folder (inbox messages appearing - not sure they are all there)
INBOX.mbox contains:
- content_index (80 MB)
- Info.plist (4KB)
- mbox (128 KB)
- Messages (Folder contains 13 "emix" files, 148 KB)
- tableofcontents (4 KB)
When I compare the above INBOX.mbox files to the 13 POP account folders in my pre-upgrade Retrospect Backup, the files sizes match, but the difference is there are no "Messages" folders in the backup - I assume these are folders/files Tiger built (and screwed up) during my first launch/import of the Upgraded Mail.
Thanks again for looking at this.
Mary

IOS Mail: Constant Incorrect Password Alerts

Sorry if this is redundant...didn't find this posted in my search.
I have 3 different Gmail accounts set up through iOS Mail on my iPad. Literally every time I open Mail, I get a pop up alert saying "Cannot Get Mail - The user name or password for Gmail 1/2/etc is incorrect". It gives me the option to hit OK or to directly to my mail settings. When I go to settings, I open it, leave the username and password alone and hit OK and everything saves like normal...which confirms that my username and password is correct.
Even though the error message appears, most times my mail still comes through but now I'm realizing sometimes it doesn't and I have no way of knowing.
What's going on with this?? I would assume this is a common problem...

I happened to stumble upon the answer. I would imagine a lot of other Gmail users are going to have this problem soon so here is the answer.
Gmail has just recently changed their security settings and they use what they're calling a "2-step verification" process. Because of this, certain apps like iOS Mail cannot verify passwords because they can't use the same process.
To fix this, Gmail now provides something called an "app specific password" that will be generated by Gmail and will allow iOS Mail to verify your Gmail account.
To set this up, go into your Gmail account settings on the Google website and click on privacy. Set up the 2-step verification process and it should be self explanatory from there.

In search of assistance learning how to modify the mail message from an out of the box SP2010 approval workflow.

So, I have found the article
http://punaro.com/2012/01/derek/modifying-a-sharepoint-2010-workflow-email/comment-page-1/ which appears to walk through the process of modifying an out of the box workflow's mail message.
However, there is a basic problem that I run into before I get started.
I am logged into the system as a regular user (ie not a farm admin, etc.).
I do, however, have full control on the site on which I am working.
I create a custom list.
I create a simple one step approval - sharepoint 2010 out of the box workflow.
I start SharePoint designer and give it the URL of the list. It opens up and I see the various objects on the left side of the screen.
I click right on the Workflows object - which is where the article says I will find the ability to copy and modify the workflow.
All I see is "open", "open in a new tab" and "Pin".
I selecdt open in a new tab - and I get a blank screen labeled workflows that says "There are no items to show in this view".
So, I click on Lists and Libraries, then on the name of my custom list.
When the list displays, the Workflows section of the page has a "Modified Workflow" displayed.
When I right click on it, no menu is shown. When I click on the modified workflow, I get the workflow settings page for that workflow.
I am trying to figure out how to create the copy of the workflow so that I can modify one of the mail messages in SharePoint designer.
Is there someone who has some advice on how to find this copy and modify option? Or perhaps a web site, web forum, article series, or book covering the topic?
Thank you!

Hi lwvirden,
According to your description, my understanding is that you want to modify the OOB approval workflow in SharePoint Designer.
After opening the site in SharePoint Designer, just click Workflows in the left panel and then the workflows in the site will load in the right part.
If you want to copy and modify the OOB approval workflow, then you need to right the approval workflow
Approval – SharePoint 2010 under Globally Reusable Workflow. After that you will see the
Copy and Modify button.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How do you stop mail messages from poping up in ipad

When I turn on my Ipad 3, i receive mail messages in the center of the screen of all new messages. you have to manually tap each screen in the middle of the screen to continue working. I changed the setting in general mail to manually fetch the mail, however the messages still pop up. This is not part of the notifications screen that you can pull down from the top of the screen. Any suggestions
Thanks

Re-visit Settings/Notifications/Mail. It is probably set to "Alerts" which require an action before they are removed. Set it to Banners which go away on their own or None to remove them completely.

Dynamic mail message's through Alert

Similar Messages

Maybe you are looking for