Dynamic mc names

Hi there,
Im having a litlle issue. ill try to explain:
I have a function that creates dynamic movieclips after
making a query by flash remoting. It calls this function for each
record.
Here it is:
function createPictures(b) {
this.createEmptyMovieClip("l"+b,
this.getNextHighestDepth());
this["l"+b].attachMovie("picture", "lod",
this["l"+b].getNextHighestDepth());
meuLod.loadClip(path for picture,this["l"+b].lod);
this["l"+b]._x = 2000;
the "b" its a dynamic value that begins with 0 and goes
increasing. When the person visit this sesson of the website she
will see a picture that can be draged through the screen. When one
of these pictures reach the screen corner she goes away and the
next picture shows on the screen.
So, in the action script i must tell the next movieclip to
move. that is how im doing:
this["l"+b].onRelease = this["l"+b].onReleaseOutside =
function(){
//the movieclip goes away here
this.tween("_x",this._xmouse - inicioX,2);
this.tween("_y",this._ymouse - inicioY,2);
//and the next should come here
NEXTMOVIECLIPNAME.tween............
My problem its to tell flash the name of the next movieclip.
As the function its called many times, even if i say
this["l"+(b+1)] it would not work because the next movieclip still
doesnt exist |o|
I already tried to separete like one function to create the
movieclips and another to tell their actions, but it didnt worked.
Im sorry one more time if my english its not so nice. Just
tell me if its confusing.
Thanks, and good day.

when's the next movieclip created?

Similar Messages

  • Dynamic file name from input payload (RFC 2 flat file)

    Hi,
    I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
    In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if  in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
    What can I do?

    Hi Marshal,
           You can add a extra node to your target strucutre like
    FileName- Node
    --FileName - Element.
    do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this  field path at Refrence in variable subtituion.
    In the Content converison add the Name & Values as below
    FileName.fileldNames -- FileName
    FileName.fieldFixedLengths -- 0
    FileName.fixedLengthTooShortHandling -- Cut
    So the extra field in u r target structure would not populate in u r target text file.
    Cheers
    Veera

  • How to change recordset bahaviour to accept dynamic column names in the where clause

    Hi
    im using php-mysql and i make a recordset and i want to make the column names in the where clause to be dynamic like
    "select id,name from mytable where $tablename-$myvar";
    but when i do this my i break the recordset and it disappear
    and when i use variables from advanced recordset it only dynamic for the value of the column not for the column name
    and when i write the column name to dynamic as above by hand it truns a red exclamation mark on the server behaviour panel
    so i think the only way is to change the recordset behaviour is it? if so How to make it accept dynamic column names?
    thanks in advance.

    As bregent has already explained to you, customizing the recordset code will result in Dreamweaver no longer recognizing the server behavior. This isn't a problem, but it does mean that you need to lay out your dynamic text with the Bindings panel before making any changes. Once you have changed the recordset code, the Bindings panel will no longer recognize the recordset fields.
    Using a variable to choose a column name is quite simple, but you need to take some security measures to ensure that the value passed through the query string isn't attempting SQL injection. An effective way of doing this is to create an array of acceptable column names, and check that the value matches.
    // create array of acceptable values
    $valid = array('column_name1', 'column_name2', 'column_name3');
    // if the query string contains an acceptable column name, use it
    if (isset($_GET['colname']) && in_array($_GET['colname'], $valid)) {
      $col = $GET['colname'];
    } else {
      // set a default value if the submitted one was invalid
      $col = 'column_name1'
    You can then use $col directly in the SQL query.

  • Saving result from sp_executesql into a variable and using dynamic column name - getting error "Error converting data type varchar to numeric"

    Im getting an error when running a procedure that includes this code.
    I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql
    DECLARE @retval AS DECIMAL(12,2)
    DECLARE @MonthVal VARCHAR(20), @SpreadKeyVal INT
    DECLARE @sqlcmd AS NVARCHAR(150)
    DECLARE @paramdef NVARCHAR(150)
    SET @MonthVal = 'Month' + CAST(@MonthNumber AS VARCHAR(2) );
    SET @SpreadKeyVal = @SpreadKey; --CAST(@SpreadKey AS VARCHAR(10) );
    SET @sqlcmd = N' SELECT @retvalout = @MonthVal FROM dbo.CourseSpread WHERE CourseSpreadId = @SpreadKeyVal';
    SET @paramdef = N'@MonthVal VARCHAR(20), @SpreadKeyVal INT, @retvalout DECIMAL(12,2) OUTPUT'
    --default
    SET @retval = 0.0;
    EXECUTE sys.sp_executesql @sqlcmd,@paramdef, @MonthVal = 'Month4',@SpreadKeyVal = 1, @retvalout = @retval OUTPUT;
    SELECT @retval
    DECLARE @return_value DECIMAL(12,2)
    EXEC @return_value = [dbo].[GetSpreadValueByMonthNumber]
    @SpreadKey = 1,
    @MonthNumber = 4
    SELECT 'Return Value' = @return_value
    Msg 8114, Level 16, State 5, Line 1
    Error converting data type varchar to numeric.

    Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
    to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for: 
    https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
    >> I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql <<
    This is so very, very wrong! A column is an attribute of an entity. The idea that you are so screwed up that you have no idea if you want
    the shoe size, the phone number or something else at run time of this entity. 
    In Software Engineering we have a principle called cohesion that says a model should do one and only one task, have one and only one entry point, and one and only one exit point. 
    Hey, on a scale from 1 to 10, what color is your favorite letter of the alphabet? Yes, your mindset is that level of sillyity and absurdity. 
    Do you know that SQL is a declarative language? This family of languages does not use local variables! 
    Now think about “month_val” and what it means. A month is a temporal unit of measurement, so this is as silly as saying “liter_val” in your code. Why did you use “sp_” on a procedure? It has special meaning in T-SQL.  
    Think about how silly this is: 
     SET @month_val = 'Month' + CAST(@month_nbr AS VARCHAR(2));
    We do not do display formatting in a query. This is a violation of at the tiered architecture principle. We have a presentation layer. But more than that, the INTERVAL temporal data type is a {year-month} and never just a month. This is fundamental. 
    We need to see the DDL so we can re-write this mess. Want to fix it or not?
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • How to set dynamic table name in sql query?

    I want set dynamic table name by parameter in sql query,just like:
    select * from :tbname
    but run report is error,BI P report table name is invalidation.
    What can i do? Thanks!

    Hi,
    that's only possible inside a data template with a lexical parameter.
    Regards
    Rainer

  • Problem with Dynamic Table Name

    Hello all,
    I am having trouble using a dynamic table name. I have the following code.....
    declare l_cur sys_refcursor;
    l_ID int;
    l_tableName varchar(30);
    BEGIN
    open l_cur for
    select hkc.ColumnID, mapping from &HKAPPDB_Schema_Name..doctablemapping ddm
    inner join &HKDB_Schema_Name..HKColumns hkc on hkc.doctablemappingid = ddm.id
    where ddm.id > 0;
    LOOP
         FETCH l_cur into l_ID, l_tableName;
         EXIT WHEN l_cur%notfound;
         -- update missing VerbID in DocumentDocMapping table
         UPDATE &HKAPPDB_Schema_Name..IndexedDocument
         SET VerbID = (SELECT t.VerbID
                             FROM (SELECT DocRef, VerbID, DateUpdated
                                  FROM &HKAPPDB_Schema_Name..l_tableName dd        - this is where the dynamic table name is used
                                  WHERE dd.VerbID is not NULL))
         WHERE HKColumnID = l_ID AND VerbID is NULL;
    END loop;
    end;
    /When I try to execute this i get an error
    ORA-00942: table or view does not exist
    What am I doing wrong?
    Regards,
    Toby

    redeye wrote:
    I only started about 6 weeks ago, with no tutorials and learning it on the fly; Same here.. only my introduction was to a 12 node Oracle OPS cluster all those years ago.. and required a whole new mind set after using SQL-Server extensively. But it was fun. Still is. :-)
    but thats what you get when a company throws you in at the deep end with a ridiculous time constraint to migrate a whole MSSQL DB.Migrating SQL-Server to Oracle is not a simple thing. A lot of best practices in SQL-Server are absolutely worse practices in Oracle - they are that different. Simple example is lock escalation - an issue in SQL-Server. In Oracle, the concept of a lock being escalated into a page lock simply does not exist.
    In terms of getting the migration done as quickly and painlessly as possible I try to reuse all the logic as it appears in the MSSQL code - in this case it was using dynamic table names. I do not doubt that i am probably shooting myself in the foot in the long run.....As long as you do not splatter too much blood on us here.. not a problem :D
    Seriously though - just keep in mind that what works in SQL-Server may not work as well (or even at all) in Oracle. So do not hesitate to refactor (from design to code to SQL) mercilessly when you think it is warranted.

  • Dynamic file name ?

    Hi,
    I am following this blog to name the target file/directory dynamically at the runtime :
    /people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
    But I am getting this error in the CC monitoring :
    Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'interface_name ' for variable 'var1'.

    Hi,
    Try following this weblog for dynamic file name.
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Dynamic filename come under the Dynamic configuration in moni, for your messages.
    This is the code used inside.
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return ourSourceFileName;
    That is why Dynamic configuration is coming in output.. It is a class to generate dynamic configuration file at runtime provided by SAP XI.
    Hope this will help you.
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Dynamic file name in case of .txt output files

    Hi all,
    I have a query related to dynamic file name scenario.
    In case of IDOC-XI-FILE sceanrio,
    <b>Is it possible to generate .txt file name based on Plant number like</b>
    <b>%<Plantname>%_%<BusinessDay>_filename.txt</b>
    <b>Note:I have implemneted this for .xml output files but I am not able to implement it for .txt output files .</b>
    PLEASE HELP ME .
    Regards
    Prabhat

    Hi Prabhat,
    I think, the normal Dynamic File Name generation should work fine in your case also. Even if you perform Content Conversion, you can use Variable Name Substiution to create your Destination file name as, the name of the file is determined first and only then is the content converison perfromed.
    for info on content conversion, I would suggest that you go through this thread and check my reply,
    Re: Dynamic  File Name for Receiver File Adapter
    Regards,
    Bhavesh

  • Dynamic File name in File Adapter

    Hi,
    I have a requirement to pass dynamic file name in File Adapter.
    Is there any way to pass a variable for the file name attribut in file adapter.
    I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
    Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
    regards
    Saiju

    Hi Saiju,
    Yes there is.
    Assign your file name to a variable, let's say 'fileName'.
    Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
    That's it... (assuming you are using 11g)
    Arik
    Edited by: Arik on Jun 27, 2012 3:12 PM

  • Error dynamic File Name in Receiver File Adapter

    Hi all,
    Dynamic file name for Receiver file Adapter Problem
    my multi mapping look like this in design mode
    messages
         message1
              SD01_E
                   FileName
                   row
         message2
              SD02_E
                   FileName
                   row
    by processing the xml look like this:
    <ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
    <FileName>L40SA939.xiConstant</FileName>
    - <row>
    or
    <ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
    <FileName>L40SA939.xiConstant</FileName>
    - <row>
    in file receivere adapter  i have try this but it dos not work
    payload:SD01_E,1,FileName,1
    Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
    is there any way to have access to Filename  in different root elements??
    regards
    Ralf

    Hi Ralf,
    i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
    Regards,
    Udo

  • Dynamic File Name - UDF

    Hi Master,
    I written the UDF for Getting the Dynamic File name.
    DynamicConfiguration conf = (DynamicConfiguration) container.getParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    // Retrieve the filename
    String FileName = conf.get(key);
    This is working ok - but I want to return these values so I can be used in mapping.
    when I try to add the statement return FileName; , the compiler then complains with the following error:
    cannot return a value from method whose result type is void return FileName;
    Please help me,
    Thanks,
    Anu

    Thanks Nithiyanandam,
    I am using the Same code. But i am getting the Syntax error:
    Source code has syntax error:  E:/usr/sap/DX1/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapaf708c00d6bb11dd83ee00101816a382/source/com/sap/xi/tf/_MM_I_FF_O_RFC_.java:13: cannot resolve symbol symbol : class variable location: class com.sap.xi.tf._MM_I_FF_O_RFC_ variable a; ^ 1 error
    UDF Name: FileName
    while creating the UDF, I select the first radio button(Value). not  Context and Queue.
    I written the below code.
    DynamicConfiguration conf = (DynamicConfiguration) container
        .getTransformationParameters()
        .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create(
        "http://sap.com/xi/XI/System/File",
        "FileName");
    String FileName = conf.put(key, a);
    return FileName;
    Thanks,
    ANU

  • Dynamic File Name depending on the Source File name

    Hi Experts,
    I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
    Source File name                 Targer Folder/Filename
    NK01.VR59.L2007030         VR59/Rec.l200
    NK01.VR71.L2017030         VR71/Rec.l201
    NK01.VR77.L2027030         VR77/Rec.l202
    See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
    So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
    Points will be rewarded for Valuable anwer.
    Thanks in Advance,
    Best Regads,
    Vijay

    Hi VIjay,
    Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " "  statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
    I am getting the following error in End to End error Scenarios:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

  • Dynamic File Name and File size

    Hi All
    I need some help in calling Dynamic File Name and Dynamic File size of a file in my adapter Module.
    Could you please provided some help on the same?
    I have tried the same through UDF it is working. Could anyone provide me the steps for the same
    Regards
    Abhishek Mahajan

    Hi,
    You can use the already available adapter module "DynamicConfigurationBean". Have this adapter module at the top of the module list in CC.
    Have the parameter value as insert http://sap.com/xi/XI/System/File FileName and http://sap.com/xi/XI/System/File SourceFileSize (corresponding to the key names)
    For more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/45/da2239feb22e98e10000000a155369/frameset.htm
    There is also a SAP note available for the same....dont remember the note number:(.....
    Regards,
    Abhishek.

  • Xml file in dynamic file name in file receiver adapter

    Hi,
    I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
    All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
    The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
    Does anybody have the solution to my problem? thanks in advance

    Thank you Raj for the direction
    The way to do it is :
    1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
    2. Put a "*" on the file name scheme
    3. In IR, create a UDF to set up target file name :
    DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    // set up file name for receiver adapter
    String SourceFileName = conf.get(key);
    conf.put(key, TargetFileName);
    return " ";
    4. Map the above UDF to the header level of the target structure.
    Regards,
    Idi

  • Dynamic file names in outbound file adapter

    I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
    Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
    Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
    I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

    I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
    Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
    Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
    I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

  • How to give a dynamic File Name for Receiver File/FTP Adapter.

    Hi Experts,
        I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out"  & in File Consturction mode i have given as "Add Time Stamp".
        therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
    where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
        How to do this ?
        for your info we are using ABAP Mapping.
        Pl help me
    Regards,
    Umesh

    Hi Umesh,
          Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
    And refer the below weblogs for Variable Subtiutuion File Name Scheme
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
    Hope this way would be solve u r problem.
    Cheers
    Veera
    >>>Reward points, if it is needful

Maybe you are looking for

  • Downloaded tv show plays sound but no picture?

    I recently downloaded a couple TV shows from itunes.  They took about half a day to download completely and when I go to play them, I can hear sound but I can't see any picture.  I get a pop-up box saying these shows only play on displays that suppor

  • Workflow Step type for Container Operation

    Hi, A STEP in a given Workflow has to have an Agent? Can't I create a Step to get data from the DB into the container and that's it? I have created a container variable called "Grade" and I need to fetch the Grade of a User (WF Inititator) from a DB

  • How to add live guitar to an iMovie?

    I want to film myself playing guitar to a song on iTunes. I have the song playing OK but when I record myself, via the built-in iCam, and then play the movie back, I can only hear my guitar, not the song. I have tried adjusting all the setting on bot

  • IPhoto 11 (ver. 9.1.1) Consolidating Libraries on Time Capsule

    Can I consolidate all my iPhoto libraries? Can I store them my Time Capsule external HD?

  • Conflicts resolution methods in Oracle Lite

    Can anyone please provide the answers of the following questions? 1_What Methods are used for Conflict detection and resolution for concurrent updates by multiple clients in Oracle lite databases? 2_ Is there any method that extract semantic relation