Dynamic Menu does not appear completely in RF Scanner Screen

Hi,
Problem is with the display of the dynamic menu on the scanner, Currently in R/3 4.6B system the whole SAP dynamic menu is visible on the scanner , however in ECC6.0 the dynamic menu does not fit on the scanner display entirely.
Any ideas why this happens.?
Regards
Dedeepya C

No replies.
Closing Thread..

Similar Messages

  • Universal Worklist menu does not appear

    Hi All
    I still have same problem. We are on SP14, EP6. My id is in admistrave group
    It looks strange, There is no Universal Worklist & Workflow menu under detail navigation bar.
    I don't see Universal worklist & workflow menu under the the following ..System Administration -> System Configuration
    I can  see the following in System admin-->System config ..system landscape, System landscape overview, keystore admin, UM config, service config, KNowlegement management(content management, collaboration, index admin)....strange ...Universal worklist & workflow menu missing.
    As suggested above, i also refreshed the UWL service via System Administration -> Support -> Portal Runtime.
    Click on Application Console under "Portal Anywhere" Admin Tools. Select com.sap.netweaver.bc.uwl and click on show. Refresh and restart the services.
    It looks like Knolwdge management component is installed as i see the the memnu for knowlege management. Under
    System Administration -> System Configuration ...There is Knowledge Management side menu where i can see Universal worklist ( THere are CM, Collaboration,Index admin, Portal app, WF also listed)
    But still Universal Worklist & Workflow menu does not appear.
    Any suggestions. Thanks again.

    HI,
       Add eu_role to the user. The home workset will be added to the user. Under home->work you will find the UWL iview.
    or
    You can find the UWL iview in Portal content -> content provided by SAP-> End user content -> Standard portal users -> iviews -> com.sap.coll.iviews

  • The navigation menu does not appear when published to folder and my 12 photos are not on the site either

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John
    Message was edited by: BOURBAH

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • Sometimes ESS menu does not appear

    Hi,
       Sometimes when the user logs into the ESS the ESS menu does not appear
    . This happens only sometimes and when we restart the ITS and ask the  
    user to log in again the menu appears.
    I looked at the access log of the ITS and found the following entry there : access with invalid random key.
    Any suggestions will be very helpful.
    Below are the technical details  :                                                              
       ESS is being launched through the ESS menu 'PZM3'.                   
       ITS 620 patch level 16, HR 470 patch level 45, Basis patch level 54.
    Hi, I know that it is a weird problem but any brain storming suggestion would be helpful.
    Message was edited by: kapil sharma

    Hi Kapil,
    - check access log of ITS if the request was received
    - check if other flowlogic services like i.e. systeminfo work
    - check with a HTTP sniffer what was send to the server/client
    - check the output of view source in browser
    - make sure that no network device (proxy,loadbalancer...)  leads to the random failure
    - check trace files of ITS
    Just some ideas.
    Regards,
    Klaus

  • Navigation Drop Down Menu Does Not Appear Correctly with Internet Explorer.

    Website was designed with Dreamweaver CS5 on a Mac. The navigation drop down menu does not appear correctly with Internet Explorer. When you mouse over a navigation option that has a drop-down menu, the drop-down portion appears on top of the first level. Hope someone can help me out.Thanks!
    http://www.catchaghosttoursofkansas.com

    Hi,
    and you should then iron out this minor inaccuracy, which I found in your source code, for example here:
    <div align="center"><a class="MenuBarItemSubmenu" href="hays.html">HAYS</a>
            <ul>
              <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
              <li><a href="forthays.html">Fort Hays</a></li>
            </ul>
    All your "first" entries have to show a '#", like this:
          <div align="center"><a class="MenuBarItemSubmenu" href="#">HAYS</a>
            <ul>
              <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
              <li><a href="forthays.html">Fort Hays</a></li>
            </ul>
          </div>
    after that you can link to the individual subgroups. See here e.g. (screenshots from my German DW):
    Hans-G.

  • It says I can drag Pages documents from iMac to iCloud. But nothing shows up. Using latest with all turned on. How do I get Pages up to iCloud? The little wheel like action menu does not appear.

    It says I can drag Pages documents from iMac to iCloud. But nothing shows up.
    Using latest with all turned on. How do I get Pages up to iCloud? The little wheel like action menu does not appear.

    yes is tehre another way
    the directions do not explain anything other than drag
    or use the little action wheel menu

  • HT1619 menu does not appear when pressing the menu bottom from the apple remote

    I got a apple remote but the menu does not appear on the computer when pressing the menu bottom!?

    Prior to Lion, it used to invoke the menu of the FrontRow application.  FrontRow is no longer available with Lion.  The menu button will work with apple TV. 
    Regards,
    Captfred

  • My main menu does not appear when I turn on my apple tv first generation.  How do I restore my main menu?

    My main menu does not appear when I turn on my apple TV first generation, how do I restore my main menu screen?

    When I turn on, it asks for language choice, then it asks for 1080i, then it asks for network choices.  I choose my network, then it asks for my network password.  I enter the password, then it say it does not connect to network, and if I hit menu on remote, it goes back to network selection.  I can not get to main menu to see my setting for the network, because there is no menu. 

  • HT202213 I own toshiba laptops. Both computers have the latest itunes software. However the 'show menu' does not appear on the screen?

    I own toshiba laptops. Both computers have the latest itunes software. However the 'show menu' does not appear on the screen?

    Thanks for the response diesel. I dont think I clarified my question very well. I'm trying to do home sharing between mine and my wifes computers. The intructions say:
    Log in as the same user on each computer.
    Ensure both are current version.
    Choose the correct list in sharing ie Music
    Then in the 'show menu' at the bottom of the screen, choose items not in my library.
    I do not have the show menu to select any songs.
    Any help appreciated.
    Cheers

  • Airplay menu does not appear on ipad

    The AirPlay menu does not appear on the control menu on my iPad (iPad 2).  I have gone through each step of the troubleshooting provided by Apple support but the menu still does not appear. I have tried to connect my Apple TV to two separate networks with an Ethernet cable and the menu still does not appear on my iPad. Does anyone have any further suggestions beyond the troubleshooting guide?
    thanks!

    Hello shearinrx,
    Try to reboot Apple TV, reboot router, also reset your device. Guide to reset device: (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Then, after that go online to: speedtest (You must be online for this to work on YOUR WIFI) Click "begin test" and it will test download and upload speed of your WIFI. A modern home can vary; an average WIFI speed is download 1-20 Mbps, upload .5-15Mbps. If it is in that range then you should be fine.
    Take care,
    Landon787.

  • When iTunes is opened the menu does not appear properly but script does

    for the past 2 months whenever i open my iTunes it opens, however not properly. I am able to see all of my songs in my library but the actual menu does not appear. I have tried reinstalling itunes multiple times as well as reinstalling quicktime. I have no idea what else to try please help!

    Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

  • HT1399 Hi! The "chapter" menu does not appear when I open a book in itunes. How can I make it appear?

    Hi! The "chapter" menu does not appear when I open a book in itunes. How can I make it appear? In fact, one time it did appear, but it seems to have been more of an incident.

    Books are meant to be read on your Devices through iBook App and will not work on iTunes.

  • RDXV60KB - tuning menu does not appear after PSU exchange

    The previous fault of switching off has been cured by replacing the PSU but since then the tuning menu does not appear.
    The other fault is when selecting VIDEO the channels can be seen but on HDD and DVD there is only sound and a blank picture.
    This is the same using HDMI and Scart sockets.
    The ribbon cables have been eliminated by substitution and are assuming the fault has been caused by the original fault

    > The previous fault of switching off has been cured by replacing the PSU but since then the tuning menu does not appear.
    Not quite sure what kind of advices do you expect from this community but according to the information posted in your original post, there is definitely a hardware related problem and there is only one solution: the faulty parts needs to be replaced . This can be done by service technicians available in your country.

  • Gummiboot menu does not appear

    Recently I have switched from BIOS-GPT to UEFI-GPT my existing arch linux installation.
    I was using GRUB 2 before and now I am using gummiboot boot manager in order for booting up in UEFI mode.
    I have installed gummiboot successfully, and created the correct entry in /boot/loader/entries and configured correctly /boot/loader/loader.conf pointing to the correct entry (default) in /boot/loader/entries.
    When I restart my machine a black screen appears an gummiboot menu does not appear (timeout is configured in loader.conf) even if I press space bar during the boot.
    Also, after installing gummiboot in the new EFI partition recently created, the files vmlinuz-linux, initramfs-linux-fallback.img and initramfs-linux.img do not exist in /boot (ESP partition). Why?
    Do I have to copy manually from the old /boot partiton? Why gummiboot installer does not copy or created them automatically?
    Could some help me?

    I have installed below packages:
    efibootmgr 0.11.0-1
    efivar 0.15-1
    Now "efibootmgr -v" outputs correct information without crashing and I can redirect it to a file (see below). It was a problem of an incompatibility version between efibootmgr 0.8 and efivar 0.15-1.
    efibootmgr -v
    BootCurrent: 0005
    Timeout: 2 seconds
    BootOrder: 0005,0000,0001,0002,0003,0004,0002,0000,0000
    Boot0000* Windows Boot Manager HD(2,200800,32000,977cd65a-eba5-11e3-b3df-60029210ec8f)File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
    Boot0001* UEFI: IP4 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,3)PCI(0,0)MAC(MAC(d897ba11434f,0)..BO
    Boot0002* UEFI: IP6 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,3)PCI(0,0)MAC(MAC(d897ba11434f,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000..BO
    Boot0003* Linux Boot Manager HD(4,2522e800,200000,1af51a36-df2b-48ce-b0df-727d1dacdf30)File(\EFI\gummiboot\gummibootx64.efi)
    Boot0004* Gummiboot HD(4,2522e800,200000,1af51a36-df2b-48ce-b0df-727d1dacdf30)File(\EFI\gummiboot\gummibootx64.efi)
    Boot0005* UEFI: Generic Flash Disk 8.07 ACPI(a0341d0,0)PCI(14,0)USB(3,0)HD(1,800,1dfc00,0002ffa3)..BO
    I have observed that in my EFI partition a new folder grub has been created after installing new efibootmgr 0.11.0-1. Now my boot partition (EFI System partition) looks like below:
    /boot
    |-- EFI
    | |-- Boot
    | | `-- BOOTX64.EFI
    | `-- gummiboot
    | `-- gummibootx64.efi
    |-- grub
    | `-- grub.cfg
    |-- initramfs-linux-fallback.img
    |-- initramfs-linux.img
    |-- loader
    | |-- entries
    | | `-- arch.conf
    | `-- loader.conf
    `-- vmlinuz-linux
    6 directories, 8 files
    Also I posted here my blkid output:
    /dev/sda1: LABEL="ARCH_201411" UUID="CE97-B268" TYPE="vfat" PARTUUID="0002ffa3-01"
    /dev/sdb2: UUID="d95a78a9-f22c-4558-ac49-cec0cf2f980f" TYPE="ext4" PARTUUID="5cbfd28a-df68-4752-86d8-9863f2a0969f"
    /dev/sdb3: UUID="Q5w0H1-Efb8-H03m-un9v-wsqG-vT8t-3yeSY3" TYPE="LVM2_member" PARTUUID="7f33830c-d668-4cfa-92f5-84835f4c9fbf"
    /dev/sdb4: LABEL="UEFI" UUID="DED6-7DD2" TYPE="vfat" PARTUUID="1af51a36-df2b-48ce-b0df-727d1dacdf30"
    /dev/sdc1: LABEL="System" UUID="7496938096934192" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="977cd652-eba5-11e3-b3df-60029210ec8f"
    /dev/sdc2: UUID="4094-1C14" TYPE="vfat" PARTLABEL="Basic data partition" PARTUUID="977cd65a-eba5-11e3-b3df-60029210ec8f"
    /dev/sdc3: UUID="C0C09561C0955F0A" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="977cd65c-eba5-11e3-b3df-60029210ec8f"
    /dev/sdc4: LABEL="TI31299800C" UUID="3ED09800D097BC99" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="977cd664-eba5-11e3-b3df-60029210ec8f"
    /dev/sdc5: LABEL="Recovery" UUID="48801C7E801C74A2" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="7ede7fc5-3852-11e4-9167-d897ba11434f"
    /dev/loop0: TYPE="squashfs"
    /dev/loop1: UUID="ece4aa52-a24f-4585-a448-f43320f58b05" TYPE="ext4"
    /dev/loop2: UUID="ece4aa52-a24f-4585-a448-f43320f58b05" TYPE="ext4"
    /dev/mapper/arch_airootfs: UUID="ece4aa52-a24f-4585-a448-f43320f58b05" TYPE="ext4"
    /dev/mapper/VolGroup00-lvolswap: UUID="40b01f68-9104-4213-bd81-e76050b97492" TYPE="swap"
    /dev/mapper/VolGroup00-lvolhome: UUID="9cdde0e7-2fb9-470c-8592-075d34a26999" TYPE="ext4"
    /dev/mapper/VolGroup00-lvolroot: UUID="b43132f0-7cee-4d3a-a634-40f3ce4f133f" TYPE="ext4"
    /dev/mapper/VolGroup00-lvolvar: UUID="a5ad70cb-25ef-462a-9962-ff321f266bca" TYPE="ext4"
    /dev/sdb1: PARTUUID="6d28aac9-0ca1-4345-9257-a4d97508e98d"
    Anyway, gummiboot menu does not appear so I cannot boot into arch linux. Why?

Maybe you are looking for